Spaces won't switch spaces more than 1 time

Since I switched to Leopard, when switching between spaces, I can move in any direction one time using the hotkeys (I have it set to move with Apple Key + Arrow Key). With 10.5 I could move around all I wanted while holding down the Apple Key and pressing any arrow key. Now I can only do that on the first press of the arrow, and then it won't move until I let go of the Apple Key and press the combo again, making it so I can only switch between one space at a time (unless I'm going to the left, for some reason it allows me to move in that direction all I want). Given the fact that I've never had this problem before until I just installed Snow Leopard, I would have to conclude it was caused by Snow Leopard. Any suggestions?

I guess I didn't think when it happened, because this should've been the first thing I tried, which was to change the hotkeys, and then change them back. It works just fine now. I dunno why it messed up in the first place, but the fix was basically common sense. Thanks for telling me that yours worked with all different combos, because it's what knocked my brain into realizing that I should have tried that. :-D

Similar Messages

  • "Firefox has had a problem and crashed"; repeatedly since skype update, won't stay up more than 3 or 4 minutes s, how do I stop it from crashing?

    "Firefox has had a problem and crashed"; repeatedly since skype update, won't stay up more than 3 or 4 minutes s, how do I stop it from crashing?

    hello, could you provide your latest few submitted crash reports? please enter '''about:crashes''' into the location bar, copy the latest few report ids from there starting with '''bp-''' & paste them here into a forum reply. this will give us a better understanding what may be triggering those crashes.

  • I have iPhone 4s and i switch find my iphone on ! my problem that i have kids who know my apple ID and they put it like more than 10 times and they block it. my iphone wouldn't open or format in right way. plz help

    i have iPhone 4s and i switch find my iphone on ! my problem that i have kids who know my apple ID and they put it like more than 10 times and they block it. my iphone wouldn't open or format in right way. plz help

    If your kids blocked the phone by repeatedly putting in the wrong password for the lock screen, follow this help article to unlock it again:
    Forgot passcode or device disabled

  • Express won't connect to more than one devise

    I got an airport express used and it won't connect to more than one device. First only my MacBook and would not allow my iPad on. And now the playstation is connected and the MacBook can't get Internet. Any advise?

    Kyle-BHD wrote:
    I got an airport express used and it won't connect to more than one device.
    Please identify the model number of your AirPort Express (A1084, A1088, A1264?), the brand(s) and model number(s) of your other networking equipment, and how it's all connected. When you launch AirPort Utility and put the AirPort Express into "manual setup" mode, what value do you see for "Connection Sharing" in the Internet panel, "Internet Connection" tab?

  • How to share more than one Time Machine folder

    Hi,
    With Snow Leo Server I found how to find how to share more than one Time Machine Folder but I can't see how to do the same with Lion Server, could you help me with that ?
    The goal of that is to offer one TM folder per user which is located on a dedicated partition in order to limit the size of TM backups per user (150Gig).
    In Lion, in can only share one TM folder for everybody and I didn'tfind if I can set a limit size per user...
    Thank you in advance,

    I have figured out a way to enable multiple backup targets.
    However, it's one of these things I wouldn't want to describe to anyone except true programmer types, because everyone else has a 90%+ chance of messing up their system if they do something wrong.
    It involves turning off file sharing, and then editing the plist files in /private/var/db/dslocal/nodes/Default/sharepoints/
    The gist of it is this:
    a) first create all the share points you later want to use for TimeMachine, and set them up for afp-only file sharing, also create one TM target, which you can either use later, or have there so the system has one entry it knows how to handle. I just made a bogus one that I'm not actively using.
    b) turn off file sharing in Server.app
    c) turn off TimeMachine in Server.app
    d) now you can edit the files, the easiest is with Xcode, so you may want to install that first
    e) for each sharpoint you made in a) there will be a corresponding .plist file in the location indicated, these are the files that need to be edited.
    f) for each of these files
         1) the item0 string property in the timeMachineBackup array must be switched from 0 to 1
         2) a new key of type array with the name timeMachineBackupUUID must be created
         3) in the newly created array an item of type string must be placed with the value of a UUID, which can be created with the shell command uuidgen
    g) make sure all the edited plist files are saved
    h) turn on TimeMachine in the Server.app again
    If all went well, you now should be able to go to one of your networked client computers and see all the time machine share points just created as options for being a time machine target.
    Anyway, if you go that route: be careful, don't blame me if you muck things up...

  • How to deploy a Webapplication on WAS more than one times on same server?

    Hi all,
    I 've a special problem:
    In our web-app (some DC's) also stored propertie-Files. Now we would to deploy this application more than one times at same server using different WebContentRoots. (f.e. http://server/app1 and http://server/app2 a.s.o.)
    We know, that we must create different EAR-Projects and refer the web-Module and configure the application.
    But in the second application there it's recommended to change some properties.
    How we can handle this in JDI without copy the web-application?
    I hope my question can be understood.
    Best Regards
    Sven Rickelt
    Using Netweaver + WAS 6.40 2004 SP 13

    Hi Sven,
    as I'm new to NWDI, I cannot give you a 100 percent, field-tested solution. But have you already thought about using the Configuration-Adapter?
    If you can change the source of your web-app, you could maintain the data formerly stored in property files using the configuration adapter of visual administrator. The SC <a href="http://help.sap.com/saphelp_nw04/helpdata/en/45/e7e14b517b42788a1c166f9f32455e/content.htm">configuration</a> allows you to access this data.
    With this approach you can stick to one web-application and do the configuration work separately for each deployed application.
    Best regards,
    Frank

  • Not able to load pages more than 3 times continuosly

    Hi
    JDeveloper 11.1.1.6, BPM/SOA 11.1.1.6, WLS 10.3.6, Database : MS SQL Server 2008 R2
    I am not very sure if it is related to BPM or ADF, but it looks more like an ADF error..
    We have a BPM process with some human tasks. The human tasks pages are ADF pages.
    The pages / user tasks are opened properly for a few times, but does not load after that, until we close all the browser windows.
    I am getting these errors intermittently whenever I try to open a human task page in the BPM Workspace.
    (Common observation is that for the first few times the pages open properly. After more than 3+ times of opening the same task repeatedly, I a getting these 2 errors).
    The page stops rendering after the last text '<div' tag.
    Following are the 2 exceptions we see in the logs of the server.
    We are using MS Sql Server 2008 R2 for database.
    I tried with both Type 4 XA and Non XA versions of the JDBC Connections, but still getting the same error messages.
    Can anyone please let us know if we might be missing anything.
    Thanks for any help.
    Sameer
    Exceptions
    ####<Nov 1, 2013 12:32:34 PM EDT> <Info> <JDBC> <localhost> <BPM_MY_server_2> <[ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <6e6476ca04c34712:23175e39:14213d8a6b8:-8000-0000000000025615> <1383323554494> <BEA-001128> <Connection for pool "MYDS" has been closed.>
    ####<Nov 1, 2013 12:32:34 PM EDT> <Info> <JDBC> <localhost> <BPM_MY_server_2> <[ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <6e6476ca04c34712:23175e39:14213d8a6b8:-8000-0000000000025615> <1383323554497> <BEA-001128> <Connection for pool "MYDS" has been closed.>
    ####<Nov 1, 2013 12:38:37 PM EDT> <Info> <ServletContext-/workflow/MYProcessesUI> <localhost> <BPM_MY_server_2> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <E5OI> <> <6e6476ca04c34712:23175e39:14213d8a6b8:-8000-0000000000025eec> <1383323917256> <BEA-000000> <JspServlet error: Servlet unable to dispatch to the following requested page: The following exception occurred:oracle.jbo.common.ampool.ApplicationPoolException: JBO-30003: Application pool com.dso.publicModel.applicationModule.CostReportInstanceAMLocal fails to check out an application module due to the following exception:>
    ####<Nov 1, 2013 12:38:37 PM EDT> <Error> <HTTP> <localhost> <BPM_MY_server_2> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <6e6476ca04c34712:23175e39:14213d8a6b8:-8000-0000000000025eec> <1383323917268> <BEA-101017> <[ServletContext@1068542008[app:MY module:/workflow/MYProcessesUI path:/workflow/MYProcessesUI spec-version:2.5]] Root cause of ServletException.
    java.lang.IllegalStateException: Attempt to validate an already invalid RegionSite:
                    at oracle.adf.view.rich.component.fragment.UIXRegion$RegionSiteImpl.validate(UIXRegion.java:993)
                    at oracle.adf.view.rich.component.fragment.UIXRegion$RegionContextChange.doChangeImpl(UIXRegion.java:1198)
                    at oracle.adf.view.rich.context.DoableContextChange.doChange(DoableContextChange.java:91)
                    at oracle.adf.view.rich.component.fragment.UIXRegion._beginInterruptibleRegion(UIXRegion.java:693)
                    at oracle.adf.view.rich.component.fragment.UIXRegion.encodeBegin(UIXRegion.java:283)
                    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:929)
                    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:406)
                    at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:2633)
                    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:421)
                    at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.renderChildrenAfterHelpAndInfo(PanelHeaderRenderer.java:542)
                    at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer._renderContentCell(PanelHeaderRenderer.java:1067)
                    at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.renderContentRow(PanelHeaderRenderer.java:490)
                    at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.encodeAll(PanelHeaderRenderer.java:231)
                    at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1396)
                    at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:341)
                    at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
                    at javax.faces.component.UIComponent.encodeAll(UIComponent.java:938)
    And
    [2013-11-01T12:17:08.807-04:00] [BPM_MY_server_2] [NOTIFICATION] [J2EE JSP-00008] [oracle.j2ee.jsp] [tid: [ACTIVE].ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: sdarbha] [ecid: 6e6476ca04c34712:23175e39:14213d8a6b8:-8000-0000000000023fb4,0] [APP: MY] unable to dispatch JSP page: The following exception occurred:.[[
    JBO-30003: Application pool com.dso.publicModel.applicationModule.CostReportInstanceAMLocal fails to check out an application module due to the following exception:
    java.lang.ClassCastException: weblogic.jdbc.wrapper.PoolConnection_weblogic_jdbc_sqlserverbase_ddah
                    at oracle.jbo.server.OracleSQLBuilderImpl.setSessionTimeZone(OracleSQLBuilderImpl.java:5533)
                    at oracle.jbo.server.DBTransactionImpl.refreshConnectionMetadata(DBTransactionImpl.java:5311)

    Hi,
    depends on whether you control the BPM task flow or not. If you do, have a look at this thread for how to debug the problem
    How to debug "Attempt to validate an already invalid RegionSite"?
    Otherwise, post it to the SOA forum if this is initiated by their generated code. The most common reason though is that the task flow lacks a default activity. So if the default activity is somewhat calculated dynamically in your application then this may be a reason
    Frank

  • ReturnEvent not get called after search more than 10 times in LOV page

    hi there,
    I using ADF and Jdeveloper 10.3.1.2
    In my project I have a form which called a LOV page for selecting multiple records and submit button sumup the values of each selected row of LOV and return to the main form and display added value on text field.
    problem is when I search records more than 10 times or more I put search criteria and select row on each time. After click on submit the value of each row is sum up return on the main form but it not reflected on main form because ReturnListener not get called .
    But when I select many rows more than 10 without searching then the ReturnListener get called when it returning on main form.
    So should I do so that ReturnListener get called.
    Is it any bug of ADF or Jedeveloper .

    Hi,
    depends on whether you control the BPM task flow or not. If you do, have a look at this thread for how to debug the problem
    How to debug "Attempt to validate an already invalid RegionSite"?
    Otherwise, post it to the SOA forum if this is initiated by their generated code. The most common reason though is that the task flow lacks a default activity. So if the default activity is somewhat calculated dynamically in your application then this may be a reason
    Frank

  • I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware software worked more than 3 times did not fix

    dears,
    I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware I do resoftware more than 3 times did not fix.
    Network also always missing.
    I am living in KS Wichita. I hope you help me pleas.
    Regards.

    iPhone warranty is not international. You will have to return your
    iPhone to Saudi Arabia for repair/replacement. Either take it back
    yourself or send to friend/relative for them to take to Apple. Apple
    will not accept international shipments for repair nor will Apple
    ship repaired/replaced iPhones out of the country where the repair
    was done.

  • Updating from 5.0 to 6.0, it keeps asking me to reboot windows to finish updating process, I have tried to reboot more than 5 times, still keep asking... Even click to uninstall, still ask me to reboot windows to finish updating process...Any help?

    updating from 5.0 to 6.0, it keeps asking me to reboot windows to finish updating process, I have tried to reboot more than 5 times, still keep asking... Even click to uninstall, still ask me to reboot windows to finish updating process...Any help?

    updating from 5.0 to 6.0, it keeps asking me to reboot windows to finish updating process, I have tried to reboot more than 5 times, still keep asking... Even click to uninstall, still ask me to reboot windows to finish updating process...Any help?

  • Is possible to execute the same executable vi more than 1 time (like notepad, for example)?

    I have a Labview executable file that use serial ports to communicate with other devices. I need to execute the same "file.exe" more than 1 time, to control different devices simultaneously. When I double click on an executable been executed (from windows explorer), the file under execution comes to front. Is possible to execute the same file more than 1 time (like notepad, for example)?

    Not the answer you are looking for I know..but still: Copying the application to another location is one possibility...if it has a different path it will execute separately.
    (OR - build control of multiple devices into one and the same application... If you do not want to redesign the code to handle multiple instruments in the same VIs, you could clone the VIs within the same application...)
    MTO

  • Send the email to myself with 4 pictures for more than 100 times --- i didn't do this

    one of my colleages send an email to [email protected], and cc the email to me.
    and my blackberry send the email with 4 pictures in my camera folder to me and joegmail.com for more than 50 times a day.
    Why does it happen? and what should i do for that. please help.

    one of my colleages send an email to [email protected], and cc the email to me.
    and my blackberry send the email with 4 pictures in my camera folder to me and joegmail.com for more than 50 times a day.
    Why does it happen? and what should i do for that. please help.

  • Can we prevent entering the same condition more than one time?

    Hi friends,
    Can we prevent the user for entering the same condition type more than one time in same sales order?
    Rama rao

    /write codes in Include ZXVVAU05/
    /prgm avbl in one of the msg in forum/
    DATA: BEGIN OF tXKOMV OCCURS 50.
    INCLUDE STRUCTURE KOMV.
    DATA: END OF tXKOMV.
    data : tab_name(40) type c ,
    ld_len type i , ld_len1 type i .
    field-symbols : <tab> type any.
    tab_name = '(SAPMV45A)XKOMV[]'.
    assign (tab_name) to <tab>.
    txkomv[] = <tab>.
    describe table txkomv lines ld_len .
    sort txkomv by kposn KSCHL .
    delete adjacent duplicates from txkomv comparing kposn KSCHL .
    describe table txkomv lines ld_len1 .
    if ld_len1 ne ld_len .
    refresh txkomv .
    message e002(zmm) with ' Please remove duplicate condition in item price' .
    endif .

  • Message alert and other alerts beep more than 3 times in a row. how to fix it.

    message alert and other alerts beep more than 3 times in a row. how to fix it.

    If they are happening at 2 minute intervals check the Settings>Notifications>Messages>Repeat Alert setting.

  • Cannot update payment info. This happened more than 6 times already.

    I am able to make purchase for few times. And then suddenly, iTunes start block from make any purchase. I did tried re-sign in again and it is able to react properly. Not sure what is going on. It happened to me more than 6 times already. Every time I called to iTunes support and it's solve immediately. Not sure if any preventive action can be done.

    It is a phishing attempt to get your Apple ID and Password.
    You should forward it to Apple : [email protected]

Maybe you are looking for