Spacific Orchestration not tracking data

When I right click on a suspended service in the Group hub and select orchestration Debugger HAT opens but I get the following error:
"Tracking database doesn't have any records about the selected service instance yet."
I have waited hours and get the same message. I am not having issues with other orchestrations. From what I can see all the jobs under SQL agent are enabled and running without
issues. I check my orchestration and it is set to track all data and the host has tracking enabled. Reboots did not help.
Any help would be appreciated
Thanks
Tom

Hi,
Please see the link http://mysoftskill.blogspot.com/2009/11/biztalk-tracking-database-doesnt-have.html and http://www.eggheadcafe.com/forumarchives/biztalkorchestration/Jul2005/post23246847.asp.
The error message is similar. Make sure your host instance is running and working properly and your orchestration is also running. Also check if you see any information in the event log.
Regards,
Tariq Majeed
Please mark it as answer if it helps

Similar Messages

BizTalk Tracking Profile Editor not tracking the data and how to implement the Orchestration as wcf service over SSL

Hi Ashwinprabhu,
thank you very much for your answer.
i have one more query, I have orchestration published as wcf service in IIS and internally orchestration calling one more service , it means orchestration sending a request and getting response back from the service.
actually we are implementing the copy of that called service through biztalk orchestration for system automatic and tracking failed messages and n/w failures.
But tracking profiler not tracking the Data.
And we need to develop the http service as https(Over SSL), we implemented in iis using self
signed certificate, it is working just browser for wsdl(in browser), we are not able to test the service in wcf test client, it is giving wsdl error, in wsdl schema reference showing with HTTP only,
please help me how to resolve the issue.
Teegala

First things first, I think it's best to publish only schemas as WCF service for dependency management reasons. That said - WSDL availability is covered in the WCF adapter under the behaviors. If you're using HTTPBasic this may be hard to modify, but using
WCFCustom allows you to add the WSDL behavior and specify that it should be available via HTTPS.
As to the BAM, are you using TPE within the orchestration or at the port level? I'd imagine your TPE tracks the start and end events of your orchestration using the Orchestration Schedule. If you're fairly confident that the TPE is correct and
yet don't see BAM data 1) make sure your SQL Agent is running healthy and all jobs look OK and 2) check the TDDS tables in both the message box and the BAMPrimaryImport databases. These will show you if there has been some sort of sync issue. There's
even a TDDS errors tables - so check that out.
Kind Regards,
-Dan
If this answers your question, please Mark as Answer

CS does not appear for Track Data in CMS- Sneak Preview

Hello All,
i want to create Software Component in CMS and define it in Track Data. Ive created SC like described on:
http://help.sap.com/saphelp_nw04/helpdata/en/da/f812d366aa44ad83a30418b34dae1c/frameset.htm
but SC does not appear, when i try to add it under Track Data in CMS.
Anyone knows where the probblem could be and what to check?
Thanks for responds!
Karol

Hi Karol,
After you create the SC you may have to Update the CMS so that it fetch the latest data from SLD. Just try using the Update CMS button and see if you are still not able to get the SC in the track.
Regards
Sidharth

LMS not tracking quiz completion or interaction data

I have created two identical assessments (apart from the questions). When users exit the POST assessment on the Quiz Reporting slide, the LMS tracks their completion and interaction data. However, when users exit the PRE assessment on the Quic Reporting slide, the LMS does NOT track their completion nor interaction data. I've configured all Quiz Preferences identically. Is there something else I'm missing?

I'm not sure of this and defer to any contrary/additional replies that may follow...but...
Past versions of CP have required some sort of scored interaction in order for the lesson to properly report via SCORM to the LMS.
If you have a CP lesson without any scored interactions (no 'reporting'), that may be why completion is being recorded to the LMS.
SO try setting up one scored interaction as you suggest.
For CP lessons that do have quizzes, you won't need that separate scored interaction.
You'll also likely want to change you settings to just 'Slide Views Only' if you just want completion reported based on them viewing the whole project, and I suspect Slide View Completion should be 100, not 10...
Let us know how that goes...
Erik

CMS can not save track data

Hi very body:
I upgrade NWDI in NW2004s SP15,Now I meet a matter.when I save the track data. The system give me a message:
*Unexpected error; inform your system administrator: com.sap.cms.util.exception.CMSUnexpectedException .*
Does anyone know what I have to do.Thanks a lot.
Edited by: mai jian on Aug 10, 2009 9:44 AM

Hi,
Is this a doublepost? See: Creation of Track in CMS
check on to this link for the error:
http://help.sap.com/saphelp_erp2005/helpdata/en/a6/a4214174abef23e10000000a155106/frameset.htm

Can you re-import your CD's in high quality, but keep the original track data?

Dear All
I got roughly halfway through importing my collection of about 800 CD's into iTunes 12, before realising that the default import settings applied by iTunes is not 'the best'. In fact it's not set anywhere near 'the best', it's something like 128kbps lossy format.   I wanted to import my CD's in lossless CD-quality. WAV would have been ideal. However it would appear I've missed a trick by assuming it would be full-quality unless I specified something else.
I'm not using portable devices to listen to my music, I have a Mac Mini and an endless supply of hard-drive storage space, and I'm only accessing it at home.
A large number of my discs are classical and jazz, and in many cases I've needed to amend or reorganise the metadata, so that it all complies with an overall filing and categorising system that makes sense and is useful.   I also have a large number of rock and blues CD's, but their metadata is normally correct when the discs are issued, so they usually doesn't need adjusting.   If you're wondering, yes my taste in music is eclectic.   I'm just as big a fan of Mozart as I am of Motorhead as I am of Mo Foster.   The problem is that with classical and opera it's important that the 'artist' category shows the names of the performer/soloist/conductor/orchestra, not the name of the composer! (I wish I *did* have actual recordings of JS Bach playing the Well Tempered Clavier!!).
So I'm looking at this big pile of CD's thinking, "is it worth re-importing them all again at CD-quality?", because I'd really like top-quality copies, and I only really want to have to do this once.   It *is* worth doing so long as I don't have to do all the jiggery-pokery with all the artist/composer data again, because that takes an enormous amount of time.
So the question is... will iTunes 12 let me re-import my discs at maximum quality, but at the same time let me keep the data that was painstakingly edited and stored with the previous (lesser-quality) versions?   Or is there a workaround? Maybe I could surreptitiously replace the old audio with new audio when iTunes isn't running and hope that it won't notice?
It goes without saying that I have spent quite a while trying to do this for myself before asking the forum, and so far I've drawn a blank so I'd be very grateful for any expert thoughts and opinions.
Best wishes
Nick

HI
Don't use WAV format as you will not retain metadate. You should use aiff if space is not a problem but Apple lossles format will be just as good with smaller file size.
When you reimport your CDS, you will be asked if you wish to replace existing copies. Select yes, you data changes should be retained. Be aware that when you reimport, CD track names and album title must match your existing files, otherwise they will not replace existing versions.
Jim

Need help restoring original track data in Match

Truly hope someone can offer advice! I know there are several threads about changes made to track data while Match is syncing don't stick, but I have a slightly different problem:
I upgraded TuneUp and without knowing it, TuneUp startet "fixing" my entire library by deleting many composers and ruining other carefully edited information
By the time I realized what was happening and shut it down, some 2.000 tracks has been wreaked havoc upon
I restored the library from Time Machine, but apparently Match had had time to sync so that the wrong edits were flushed back to my library
I have now tried several ways of fixing this:
Restoring the library and using one of Doug's scripts to add a space at the end of all track names to make "my version" the latest, but this process takes so long that it times out and by then Match has again ruined my track info
Turn off Match, restore the library, make changes to some track info for all tracks, and turn Match on again. Under this approach, Match seems to treat the cloud copy as the "original" even if I made changes to my local copy later
Restoring the library, allow Match to start syncing so that my local library is viewed as part of the Match set, then disconnect the internet connection and make track changes, turn on again and sync Match again. Still, the Match changes are flushed back to my local library
Unless there are other suggestions, I see no way out by let Match stay turned off... Anyone with better insight than me into how Match treats changes and which take priority that could help?
Bjorn

Hi,
I'm not sure this will work. I use an app, no bearing on this issue, called Ivolume which adjust the volume of the tracks. To get match to recognise volume change and that the file has been update, Ivolume adds information into comments box. My understanding is that this change allows latest file to replace the one in the cloud.
My thoughts are that you have matched turned off, restore library pre problems then add a comment for those tracks affected. Once done turn back on match. A long shot but worth considering.
Jim

Trying to import boujou .ma tracking data into after effects, seems like it doesn't support the file.

I have tried everything to try and get this to work; i have tried multiple settings in boujou, i have imported the .ma file into maya and exported with baked keyframes and only the camera selected etc. I don't know what i'm doing wrong. I am wondering whether Adobe has cut support for .ma files altogether, which is a real pain in my *** as the built in 3d track just isn't good enough. I have tried dragging the file into after effects, i have tried importing it neither of which do anything. The .ma files don't even show up, i have to select 'all files' under the file type when i choose import to even see the files, and when i click them it doesn't recognize it as tracking data, it'll try and import it as a .PNG file or something. I can't seem to find any plugins that would enable me to import .ma files. I just need that tracking data as a Camera in my scene and i don't care how it is done. Additionally, i have tried exporting as a .txt file and copying and pasting that data into a camera, which doesn't work (unless im doing it completely wrong).
Thankyou for reading

I also experience this problem. My mp4 clips has been taken with a Samsung NV24HD camera and are HD (720p). I haven't tried to convert these clips but I think it should not be necessary since I can play them in quick time. However I have perian installed, perhaps that's why they play in quick time? The next question is then: Is there a similar plugin to iMovie?

What is the recommended way to obtain tracking data from carriers post XSI

We currently run an old version of SAP Business Connector. We are in the process of migrating all interfaces off BC onto PI. The one remaining interface we have problems is the XSI (Express Delivery Interface) interface we have with ECC06 and UPS via the BC server. The interface works but is not stable and we would like to decommission it if we are able.
I'm not 100% clear but it appears that XSI is no longer the recommended solution for obtaining tracking data from carriers. What is the recommend method today? We'd be happy to use a PI or ABAP solution but would prefer a standard solution that was supported by SAP and UPS.

Using Time Machine is the simplest way to back up.
debasencio wrote:
They don't fit on a standard data DVD and when I try to back it up to my 500GB external hard drive it says its not formatted to files that size.
How is the drive formatted?
If it's DOS/FAT32, you can only size file sizes up to 4GB.
If you are using it on a Mac only, format it Mac OS X HFS+.

ITunes U API GetDailyReportLogs not tracking new Collections?

I have discovered the analytic data I am retrieving from the iTunes U API GetDailyReportLogs is not tracking any iTunes U Collections we have created after about Jan 2014 but Collections created earlier are tracking OK. We often publish items (video and audio) to multiple iTunes U Collections. I have been getting iTunes U usage data with GetDailyReportLogs since 2009 and only now realised, we are not getting all the usage information. A typical GetDailyReportLogs URL I use is https://deimos.apple.com/WebObjects/Core.woa/API/GetDailyReportLogs/swin.edu.au- dz?StartDate=2015-04-11&EndDate=2015-04-…
Some questions:
Is the iTunes U API GetDailyReportLogs still supported?
Is anyone still using iTunes U API GetDailyReportLogs?
Are you experiencing the same issue?
Do you know what the cause might be and a solution?

Appe has replied to me directly for this issue...
"...unfortunately we have depreciated the GetDailyReportLogs for iTunes U Public Site Manager sites some time ago. As such it will only work for collections that were built in our older infrastructure and any collections built recently utilise different resources and are sadly invisible to the GetDailyReportLogs action.
However, I was assured that the current reporting functions on PSM do include both types of collections (old and new) and that is the best one to use."

How to track data exchange

Hi All,
I am working on a load generator application where i record client interactions(request and response objects) in XML serialized form.
Now i want to replay those recorded stuff. I am able to replay simple
calls(requests) using reflection APIs.
But the problem comes when i have to use data returned by one call in a later stage in another call. So there should be some mechanism to track data
exchange while recording and use this tracking mechanism while replaying?
I think might be i need some HashMap type structure but not sure !:)

Thanks Roy.
JMeter deals with Web Applications but not ejb application clients
I have recorded ejb calls in XML serialized form. When i was going to replay those recorded scenarios, i found a very
big problem. The problem is divided into 3 cases:
/*Case1:*/
Var x = func1.a ();
. // Some intermediate statements
func2.b (a, b, x);
/*Case2:*/
func2.b(a, func1.a(), b);
/*Case3:*/
Var x = func1.a();
. // Some intermediate statements
Variable x is updated
func2.b(a, b, x);During replay of those recorded calls
You can see the values returned by func1 call(it was already recorded) have
been used in func2(this call is already been recorded) in 3 different ways.
I have to find these correlations during runtime (replaying of those recorded calls) and have to pass these dynamic values returned by func1 to func2 instead of those values which are in recorded script.

Buffer Table not upto date

Hi All,
I am facing the same issue while creating and accepting a service entry sheet via BAPI_ENTRYSHEET_CREATE in a report . I get a pop up message S001 (Buffer table not upto date) in ML81N. Though, it is not an error message it delays the further processing. I have checked the relevant threads for this message but since there is no SRM involved, I couldn't track the exact solution. Is the issue related to administration?
Regards,
Garima

Check this note, if this might be relevant for this issue:
https://service.sap.com/sap/support/notes/934199
Thanks
SM

Restoring Original Track Data

I recently edited the details of a large number of tracks and I want to restore the original data I.e. Artists Name instead of Various Artists as I had changed it to. I thought if I deleted the tracks from ITunes and re imported them this would restore the original track data but it doesn't seemed to have work. I also tried changing the location of the folder I was importing from to see if this would make any difference but it seems wherever I import these tracks from they retain the changed information and not the original...
Anybody able to help???

It depends whether or not you have iTunes organise the files too. If so it will have renamed the files to match the new information, otherwise you can use a tagging tool to reset the tag from the file properties such as filename (Track No./Name), folder name (Album), parent folder name (Artist).
tt2

No track data for music CD will load since I updated to iTunes 12

No track data for music CD will load since I updated to iTunes 12

I am still having the same problem, I tried rebooting several times and adjusting my firewall. The only way I have found to work around the problem is to upload the CD to my MacBook Pro and pull it over to my iMac using home share. FYI, I have not updated my MacBook to iTunes 12 or OS X Yosemite.

Tracking data issue for iphone 4s

Hey folks
I am using iphone 4s and using with so many app. needed internet connection but my ''cellular netwark data'' sent and received does not change some how.
Cellular data usage does not reflect any usage. I would like to track my usage on the phone.
How can ı solve this problem?
ios 5.1.1
Thanks in advance.

Find out if your carrier offers an app for tracking data usage.

Spacific Orchestration not tracking data

Similar Messages

Maybe you are looking for