Spacing at the end of each column in 3 column format
I am copying text with footnotes from a word file into Pages. When the text is pasted into the three column format some of the columns are really short. They don't even make it half way to the start of the foot notes on the bottom of the page. How can I make the columns extend to the start of the foot notes on all of the pages? Please Help. Thank you.
No luck there- I had actually already tried that. The only thing that has worked so far, after many attempts, is to erase the footnotes and reinsert them. (So I'm guessing all the issues stem from pasting over from Word.) If there's an easier way, I'd love to find it since this is a rather long paper with lots of footnotes. (And I can't just leave the document in Word...based on my formatting tries and research, it's not even really capable of doing the footnotes the way I'd like them to be.)
Similar Messages
-
When I click to open the hyperlink in my Word file, the message I get in Firefox is "The requested URL /submissions.htmlFirefoxHTML\Shell\Open\Command was not found on this server." When I delete that portion of the URL, the website opens fine. What can I do to make the hyperlinks work properly?
Thanks for the suggestion. I tried it, but it didn't work. The link information is written correctly on the MSWord page. But when I click on it and the Firefox tab opens, the page can't be found because "FirefoxHTML\Shell\Open\Command" has been added to the end of each URL. Might it help if I reset Firefox?
-
How to add a signature at the end of each post
How do you add a signature at the end of each post (if possible)?
^^right now, I just have to copy and paste thatIt's possible to set up your signature on the Desktop such that it can be simply dragged into the Camera icon's "From the Web" field...
1. Right click on an already posted pic
2. Choose "Open Link in New Tab"
3. From the address bar of that new tab, drag the URL's favicon (little icon) to your Desktop whereupon an "@" icon will be created
The above only has to be done once, and then to use that image in future posts...
1. Click the Camera icon
2. Click "From the Web"
3. Drag the URL's "@" icon from your Desktop to the URL field and click Insert Image
And if you want your signature instead of a generic "@" icon, that's possible too: -
How to delete a character at the end of each line in a file
Hi
How to remove a character or symbol at the end of each line in a file?
I am having a file with every end of line conatins special chars @.
I need to remove or delete that sysmbol from file.
RegardsJoeBorland wrote:
File is large about above 20,000 lines.
I need to find the optimum solution.
Like reading a file and find the end of character and writing into a file.
The above way is correct or any other way?Try it and see. Such a program will only be a dozen lines long. -
I am editing an idvd slideshjow to have some of the music selections fade out at the end of each vacation segment. Is there a way I can fast-forward through the slideshow so I can see where the music is ending and adjust the time to end properly? (without repeatedly clicking the forward button on the e-remote)
Thanks very much, varjak paw. I checked half a dozen tracks on my iMac from different albums which did not copy over, plus several which did copy over. They all show the same location:
Users/Christina/Music/iTunes/iTunes Media/Music/Brandenburg Concertos etc. (one example)
What does this mean relative to the music which didn't copy? Is there another step? or somewhere else I should look?
And wow, thanks for the info about not having legal right to keep the tracks from the CDs. I am embarrassed that I didn't know. I gave most of my CDs to my sister. Before I delete all this highly prized music (400-500 tracks) -- if I get the CDs back from her and keep them at my house, can I continue to keep those tracks on my iMac? (Sister does not have iTunes or even know what an mp3 is, so it's not like she has copied or imported the CDs -- I just didn't realize I needed to retain possession.)
Or do I still need to remove all that music from my library?
Thank you again for your help.
C. -
Since installing latest iTunes my playlists stop at the end of each song -why?
since installing latest iTunes my playlists stop at the end of each song -why?
Richard Emerson1 wrote:
since installing latest iTunes my playlists stop at the end of each song -why?
Most likely your songs got unchecked. iTunes will not automatically advance to an unchecked song.
First make sure you can see the checkboxes. If not, Preferences > General, Show list checkboxes.
If they have gone empty, you can recheck them all at once by holding the CMD or OPTION key (sorry I forget which on a Mac, so if one does not work try the other) and click any empty box. -
Can You Get iPod To Stop/Pause At The End Of Each Track
I really need my iPod to stop/pause at the end of each track/song, but it insists on playing right through a playlist one song after another. Does anybody know if there is a way of achieving this, there doesn't seem to be anything in the manuals about this. My iPod is new and is the 60GB color screen model. Any help would be much appreciated.
Thanks, Peter.Hi boaster, is this an apple accessory, or where else will I find one? When you say there will be some manual intervention, I presume you have to press the button to actually stop it at the end of each track??
Dave W. I've tried your suggestion and it works fine. Its also good because it keeps iPod within the correct playlist. The original suggestion of one track per playlist also works, but unfortuanatly iPod defaults to go back to the main menu at the end of every playlist so you then have to navigate back to where you need to be. Dave, it looks like your suggestion is the answer at the moment, many thanks, although would like to know more about this 'airclick' remote please. Cheers. -
Strange digital artifacts at the end of each song importing via iTunes
I've tried a few variations on archive searches and wasn't able to find an answer to this: In ripping some of my CD's into iTunes (either Apple Lossless or WAV) I've been getting some very odd, brief digital artifacts at the end of each songs on a CD. This sounds like two or three seconds of an audio tape on fast forward. It only seems to happen on new releases (I cannot think of any older CD's it's occurred on). I just got a copy of Mary Gauthier's new album (great CD by the way) and it happened on that one, for example. I tried ripping it multiple times in Apple Lossless, and WAV (always in iTunes) and each and every time it created files where this strange artifact existed at the end of every song. I play the CD I ripped the files from and the artifact is not there. I have several CD's, most of them recent releases over the past five years, that do the exact same thing. Otherwise everything else functions perfectly an the bulk of my 700+ CD library has imported without a hiccup. Is this some kind of anti-piracy technology...or do I simply have some setting off in my itunes preferences (Error-Correction is on, WAV or Apple Lossless is always set to Automatic, have experimented with importing to startup disk and external disk-same results). The artifacts seem to always sound the same too...they never vary, except that they sound different from song-to-song, but the same if say, the first cut is played over again. They are always 2 seconds plus or minus, and always at the end of a cut (the final 2 seconds or so). They do transfer verbatim to my iPod, and also play via iTunes through my stereo.
Anyone have any clues what this might be?As a follow up, I went to the Genius Bar for a bowl of Mensa Stew, but only got some tepid broth. Here's what transpired:
The girl I was speaking with suggested that the artifact was the software misinterpreting information between the cuts. It was only a theory. She had not heard of any other incidents to relay. First she suggested I rip as MP3's. I explained that wasn't an option for me. She listened to a few cuts on a CD I'd brought with, or rather the ends of the cuts and confirmed there was a problem with the rip. She went through my settings, and asked if I'd tried it with Error Correction turned off. I explained I hadn't and that I preferred to use it. She suggested attempting to rip one of the cuts with it turned off just to see how it did. We did that and no artifact was there. So her 'solution' was to either leave error-correction turned off always, or turn it off for those problem CD's that produce the artifact (I'd estimate about 5% do on my laptop). This did not explain why it was doing it, nor why my g5 tower, which is running a carbon-copied system with all the same iTunes settings, does not produce the artifact with Error-Correction turned on.
I'd be interested to hear of anyone else who's been having problems importing hi-rez files in iTunes. I know of at least one other instance where the artifact produced (on a MacBook) is dis-similar to mine in that it takes the form of brief electronic beeps moving from channel to channel.
Anyone else? -
all my song in my playlists are cutting off either in middle or at the end of each song. How do i fix this?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
I have emails that ask for certian items to be addressed such as "please fix leak in bath sink" and then the next line will have another request and on and on. I would like to answer each question at the end of each line with a response (preferably in a different color font to stand out) such as "yes - will fix" or "that can't be done" or "you will have to fix that yourself". Then I want to send that reply back to the original sender.
''sfhowes [[#answer-697423|said]]''
<blockquote>
I suggest you consider this add-on: [https://addons.mozilla.org/en-US/thunderbird/addon/clippings/ Clippings] ([http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html How to install]).
</blockquote>
I did look int this but I need to have each answer different in a lot of cases but i thank you and did get an answer that does help greatly - Thanks -
Putting buttons at the end of each row of a report
Hi
Was wondering if anyone new of a way to put buttons on the end of each row of a report. Basically i want a button and a LOV box next to the end of each row so that the user could set the value of the LOV box click the button and that would update just that row. Obviously i want to give them the option of batch processing it as well but for now i just want them to be able to update one row at a time.
This does not nessacary need to be with a LOV box it could also work with radio buttons to specifiy the value to update.
If anyone knows a way of doing this or any information where i can read about it then please let me know as i would be very interested.
Or can you make report fields eidtable so that i can just run a massage update on the using all the values in the report?
Thank you for your time
Daniel Stead
Message was edited by:
Dan SteadNo such luck a tabluar updat form shows all the rows for that table. I only want the user to be able to update their rows in the table.
This is bascally what i want to do.
I have two reports that only show records that are realted to the current user that is logged in.
The first report shows all records in the table for the current user where the supervisor (the current user) type is set to confirmed.
The second reprot shows all the records in the table for the current user where the supervisor (the current user) type is set to requested.
That is what i have acheived so far.
I want to be able to make the superviosr type in the second report editable with a list of values requested, rejected and confirmed. The user can then select what he would like the type to be for the specific record in the report and then press a button that updates all the reocrds (or a button at the end of each row that updates each row). If the row is confirmed it moves to the first report, if it is still requested it stays in the second report and if it is set to rejected then it will be in neither report.
Therefore my question is if i make the supervisor type eidtable how can i link it to the id of that row so that it updates it?
If this is not clear please state to me which part i have not made clear.
Thank you for your help.
Daniel Stead -
Extra characters at the end of each servlet response
I am attempting to develop a servlet that sits between a server and a browser, and simply martials arguments to send to the server, and then forwards responses to the web browser. When working with Weblogic 5.1 sp 11, things worked fine, except that an extra new line was added to the end of each response. I am now testing against Weblogic 7.0, and instead of a new line the characters "null" (not including the quotes) are added. I have tried to experiment to see if anything I have written or control is causing these characters to be sent to the client, but as far as I can tell there is nothing there. The I write my final character, close the ouput stream, and the client recieves bytes I did not send. Has anyone else experienced this? Anyone have ideas on how to fix this problem. Thanks for any input,
Nathan
Yes! There are advantages with jar files.
The jar tool combines multiple files into a single JAR archive file. jar is a general-purpose archiving and compression tool, based on ZIP and the ZLIB compression format. However, jar was designed mainly to facilitate the packaging of java applets or applications into a single archive. When the components of an applet or application (.class files, images and sounds) are combined into a single archive, they may be downloaded by a java agent (like a browser) in a single HTTP transaction, rather than requiring a new connection for each piece. This dramatically improves download times. jar also compresses files and so further improves download time. In addition, it allows individual entries in a file to be signed by the applet author so that their origin can be authenticated. The syntax for the jar tool is almost identical to the syntax for the tar command. A jar archive can be use as a class path entry, whether it is compressed or not.
If u require more help on jar file, you can go to the Java Tutorial available on java.sun.com -
Adding a pipe character '|' at the end of each line
How can I add a '|' at the end of each line in a text file?
Please provide an example.
TIAUsing Readers and Writers are often a better choice for text: they are designed for character-based I/O, handling different character set encodings and thus more easily localizable.
BufferedReader and PrintWriter are buffered which in many cases will increase performance.
These classes also provide line-oriented methods, readLine() and println(), which will handle end-of-line delimiters in a platform-independant way.
BufferedReader in = null ;
PrintWriter out = null ;
try {
in = new BufferedReader(new FileReader("infile.txt")) ;
out = new PrintWriter(new FileWriter("outfile.txt")) ;
String line ;
while ((line = in.readLine()) != null) {
out.print(line) ;
out.println('|') ;
out.flush() ;
} catch (FileNotFoundException e) {
System.err.println("problem opening file for read: "+e) ;
} catch (IOException e) {
System.err.println("problem reading file: "+e) ;
} finally {
try {
if (out != null) out.close() ;
if (in != null) in.close() ;
} catch (IOException e) {
System.err.println("problem closing files: "+e) ;
} -
How to remove the thick line at the end of each page of my report
Please how do I remove the thick line that appears at the end of each page of my report anytime I publish the report unto the Web.
Bring up the property inspector against the report object. In here you will see the settings for HTML output. Remove the entry against the "After Page Value" property.
-
Remove the extra space at the end of each page in the report
Hi,
When the RDF report output is seen in notepad, it shows empty lines at the end of each page. Is it possble to avoid these empty lines and display the output without any empty lines.
Thanks in advance.
DivyaIn the headers and footers of table/loop nodes, use event "at page break" on condition tab. Read some documentation like [Printing Data in a Table|http://help.sap.com/saphelp_NW70EHP1core/helpdata/en/0b/e06b192d8411d5b693006094192fe3/frameset.htm]
Regards,
Raymond
Maybe you are looking for
-
Verizon, Nobody.. and I mean NOBODY is buying your crap. You don't update to the latest software in a timely manner. The entire planet has the KitKat update for Android and you don't under the guise of better experience. That is crap, everyone else c
-
No Flash Video Playback on Internet
Flash Page with embedded video --- I can't figure out why the page plays locally just fine, but once it has been uploaded to a server, you only get the page and the controls - never the video. So, what is the secret? If you actually see the video, le
-
Hi Experts, I would like to know the Etherchannel sequence. If I have 2 ports in EtherChannel, for example, port 1 and port 2. Source and destination mac is my load balance method. I would like to know when the first packet goes to the Etherchannel
-
I like to go to abc or cbs pbs etc. and watch their videos but they do not run all the way thru. They stop and start and stop and start and freeze and start and quit.
-
How to install windows 7 Firefox without "Ask search" and other software?
I would like to install pure Firefox, lean without getting other add-on software, such as "Ask search". I am requesting download from Mozilla home page. Thank you for helping.