Spam and Blind Carbon Copy  Bcc:

Apparently one of the ways spam is sent and bypasses filter rules is to put fake email addresses in the Cc: header and your real email address in the Bcc: header. I set the rules filter to only accept an email when the To: header or Cc: header has my real email address listed. Apparently, the Mail filter actually reads the Bcc: header as if it is the Cc: header since spam emails addressed to nonsense addresses keep getting through.
Is there a way around this problem. Can apple adjust the Mail filtering system, or do I have to block the Cc: header as well to actually prevent Bcc: addresses from being delivered to me?

I may have a much simpler rule to deal with Spam and Junk mail that you want to try:
If (any) Sender is not in my address book
Move Message to Junk Mail (a folder created on my Mac)
Stop evaluating rules.
Since these mailers are certainly not in your address book, you only have to give it a quick glance to see if any of these messages could be from somebody you know, and not yet in your address book. Then I delete them all, without looking at them.
Of course this requires you to keep all your known contacts in the address book. It works great for me, just wanted to share this with you.

Similar Messages

  • Emails not being sent to blind carbon copy (Bcc) on my ipad

    Emails are not being sent to blind carbon copy on my ipad

    Yep, the forwarding trick should do it...
    Get yourself an Gmail account and foward your work email to the gmail, and the setup the Gmail account on your Blackberry.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • RPTARQEMAIL and "blind" carbon copy sending (bcc email)

    Hello everyone,
    In our fairly-standard Employee Services and workflow, we use RPTARQEMAIL run as a batch job nightly to bundled up and send email notifications to all Requestors whose leave has been approved that day.
    However, when the user receives the email they see ALL of the Requestors for that day appended together in the "To:" field of their email.  They do not want this to happen as they see it as a breach of privacy, particularly if it was personal leave.
    The email is sent via standard SAPConnect (SAP Business Workplace) mechanisms, using a Batch user called HRBATCH, and goes from our ECC6 system to our internal MS Exchange server, and thus to the internal users' email box.
    We are looking at two options but are unsure of the best way to proceed:
    1. Option 1-- Change the HRBATCH profile to limited it to send email to one recipient at a time, or
    2. Option 2-- Change the way RPTARQEMAIL is calling the email to force it to use BCC: instead of TO:
    However...after a length investigation we are not sure how to do this.
    Any assistance would be greatly appreciated,
    regards,
    Alistair
    Alistair Lloyd
    Stream Leader
    Total Business Transformation Program - National Foods 
    Email: [email protected]       
    Web: http://www.natfoods.com.au/

    Folks, forgot to up date this Post to advise that with the assistance of SAP Support this problem was fairly easily solved.  Refer the attached Message extracts:
    Response #1 from SAP
    If you make sure that the report RPTARQEMAIL is standard,
    I mean that Report was not modified before. You can choose
    radio button 'With All Documents'
    In the screen of RPTARQEMAIL to avoide send email together.
    In the standard scenario the radio button 'With General Notification'
    all the requestors are grouped together for sending the mails.
    Reply from Me
    Thank you ... So - just to confirm - as we run this as a Batch
    job with a variant, are you saying that we just need to change the
    variant to switch "on" the "With All Documents" radio button for "E-
    Mail Text For Requestor", then the requestors will NOT be grouped
    together?
    Can you please confirm which field in the Variant this would relate to?
    Response #2 from SAP
    you are right. you need to change the variant for requestor.
    I have attached screen copy for variant of the RPTARQEMAIL
    for your reference.
    By the way, I suggest you to try this variant with test run
    firstly. if it can be executed as you expected and then
    please run this as a batch job.
    Thanks&Best regards,
    Don't think I'm able to attach the 'screen copy' she mentioned, however in text on the Varient it looks like so:
    ==================================================
    Leave Requests - Send E-Mails
    (Exc)( i )
    E-Mail Text for Requester
    [x] Send E-Mail
          With this Text:                  [HR_TIM_ARQ_REQUESTOR     ]
    [  ]  With General Notification            [X] With All Documents
      [etc etc]
    ==================================================

  • Blind Carbon Copy in Mail 1.3.11

    Is the option to send messages to multiple recipients as a blind carbon copy available in Mail version 1.3.11? I'm asking this for my father who has an eMac running Panther 1.3.9. I'm using Tiger and a different version of Mail than his and I've so far been unable to determine if and how.
    Thanks.

    Yes it is available.
    You can set the blind carbon copy (Bcc) field to appear by default. With a compose window open, choose View > Bcc Header.

  • Blind carbon copy in email templates?

    Hello,
    how can I use blind carbon copy (bcc) in email templates?
    I added the field to the E-Mail Template und modify the waveset.dtd, but this is not enough.
    How can I use a BCC to an email template on IDM?
    Thanks

    Good morning.
    This is actually a bug:
    Bug 12699 - RFE: add support for BCC recipient to email notification
    IDM 8.1.1 will be the first available version to contain the fix.
    Regards,
    Alex

  • Information Broadcasting using BCC (blind carbon copy)

    Hallo Forums,
    Is there somebody can answer my question ?
    Because of some security reason, I would like to send the Information into reciever through email as BCC (blind carbon copy) reciever.
    can you tell me what should I do ?
    Thanks for any help
    udinpetot

    I do not think we have any option available.
    You can send it to a mail id and from there you can schedule it as BCC.

  • Upgrading harddrive and using Carbon Copy Cloner

    Hi I'm planning to replace my internal harddrive on my old MacBook Pro (August 2007) running Leopard with the following harddrive:
    Seagate Momentus 7200.4 ST9500420ASG - Hard drive - 500 GB - internal - 2.5" - SATA-300 - 7200 rpm - buffer: 16 MB
    Is it fully compatible? Also, this ST9500420AS "G" model is said to have its own G-Force sensor. How does it all work out with MacBook Pro's sudden motion sensor?
    Finally, if I use Carbon Copy Cloner to clone my old harddrive onto my new harddrive, how can I solve the problem of the "etc", "tmp" and "var" recurring folder problem without the use of the Mac OS X Installation Disc (since I've lost it)?
    Thanks very much.
    P.S.: Anything else special that I need to take note of when using Carbon Copy Cloner?

    The Random Sniper wrote:
    Thanks very much. So it is recommended that I should rather for the ST9500420AS non-"G" model for my MacBook Pro to avoid conflict with the existing Sudden Motion Sensor?
    If you want to stay with a Seagate, yes.
    However, I've also heard that Apple has released a firmware in the past to deal with the G-Force sensor / SMS conflict issue for the MacBook Pro (while nVidia didn't)? Is that true?
    Which firmware update are you referring to?
    On the other hand, would Western Digital Scorpio Blue's WD5000BEVT be a good alternative? I have heard that although it is only 5400rpm, it's performance is as good as 7200rpm harddrives.
    Take a look at a site which has reviews, such as newegg, tomshardware, xlr8yourmac.com. In my mind, Seagates seem to have gone downhill and quite a few people have posted here with compatibility issues.The WD 640GB also seems to have more than its fair share of problems, although I don't believe the 500 shares those issues. After reviewing tests at tomshardware, I chose a 7200 Hitachi 500GB, which was at or near the top in nearly all categories, and has very good user reviews at newegg. I've yet to choose a 2.5" SATA external enclosure (with the number of enclosures around the house, it's hard to believe I don't have one yet, but I guess not), so have not run it yet.

  • Mac Pro Boot slow after Leopard Update and Carbon Copy Cloner

    I just purchased a 1TB Internal hard drive - Seagate Barracuda 7200rpm - and used Carbon Copy Cloner to clone my original hard drive (which is running Tiger). Everything seems to be normal, except the the long boot up process. The desktop appears, the dock appears, and then there is a long pause of 20 to 30 seconds before the drives mount and and the desktop folders appear. I have 10 gigs of RAM, I have rebuilt the Directory with Disk Warrior 4.1, and also repaired the disk permissions (although some of them state that they can't be repaired). When I reboot from my original 250 Gig hard drive, the boot is lightning fast. Any thoughts? I have many third party software programs installed and am trying to avoid a fresh Leopard Install. Thanks, this is my first post!

    this may happen on the first boot on a cloned drive because the system has to rebuild various caches that are not cloned. it should be back to normal boot speed after that.

  • Upgrade of a hardrive with carbon copy cloner

    I upgraded my daughter's macbook hardrive and used carbon copy cloner to transfer all the mac stuff over to the new drive. It worked great but the windows stuff did not move with it. she uses boot camp and has not upgraded to leopard yet but has the most recent version of tiger. Is there a way for me to move in total her windows in boot camp without reinstalling it from the beginning?

    Hi,
    two things you can try:
    If the BootCamp Windows uses the FAT32 file system, try this: http://discussions.apple.com/thread.jspa?threadID=717201&start=0&tstart=0
    if it uses the NTFS file system, have a look at WinClone: http://www.twocanoes.com/winclone/
    Good Luck
    Stefan

  • Problems with sending carbon copy and blind copy with gmail

    I recently started using Safari and would like to continue as it is fast. But have problems with it when I use Gmail that I don't have in Firefox or Internet Explorer. For example when I want to forward and email to several people using the blind copy or carbon copy feature - each time I click a name i have to move the cursor back into the box manually because each time you add a name the cursor jumps to the subject line automatically. I forward a lot of email, How can I make using these features work with Safari? Any help is appreciated. Thanks.

    I would delete the account on the iPod an recreate the account. It is easy to make an error or enter the setting and hard to find the error.

  • How can we disassociate an Apple ID from a set of computers formated from a single computer using Carbon Copy Cloner and a single image and then Migration Assistant to install their old profile? The original ID is the Apple ID for all the stores.

    Here is a bit more detail.
    We were replacing old teacher machines and wanted to do it as efficiently as possible. Therefore, we set up one computer, through the OS installation and ran all updates, and then made a disk image so that we can use Carbon Copy Cloner to image all the other computers without having to run all the other updates. Once they were set up to a base level and assigned to a teacher we used Migration Assistant to import all their old files and items. Everything has been fine until recently the computers became aware of needing an update for one or two apps. The machine asks for the original computer's Apple ID for all updates. We have logged out of the apple id and back in with another to test if running the updates will work with that Apple ID and even after a refresh it still asks for the other Apple ID. How can we disassociate the Apple ID from those other computers so that the individual who owns the original is not needed each time there is an update or has to give out their Apple ID password?

    There are two parts to this:
    1) It may be that you should have an Apple Education Support person helping you with this. If you have enough computers for this to be a problem, you may benefit from a Server, a site license, and an occasional visit from an Education Support Specialist.
    2) The brief answer, if you want Individual Apple_IDs to control each computer, is to buy new copies of Mac OS X under those new Apple_IDs and re-download and re-Install. Mac OS X is customized to the Apple_ID before it is downloaded.

  • Carbon Copy and SuperDuper FAILED during copy for the 8th time! PLEASE HELP

    This is ridiculous! I've spent the past 4 days trying to clone my HD and I'm leaving for about a month in about 3 days and I really need my laptop! Here's the log and I'm hoping you guys can save me!
    SuperDuper:
    | 11:53:41 PM | Info | SuperDuper!, 2.5 (84), path: /Applications/SuperDuper!.app, Mac OS 10.4.11 build 8S2167 (i386)
    | 11:53:41 PM | Info | Started on Wed, May 13, 2009 at 11:53 PM
    | 11:53:41 PM | Info | Source Volume: Macintosh HD, mount: /, device: /dev/disk2s2, media: WD i HTS54 External, interconnect: External USB, file system: "Journaled HFS+", OS: 10.4.11 (8S2167), capacity: 111.47 GB, used: 93.98 GB, directories: 80742, files: 345660, ejectable: NO, ACLs: Disabled
    | 11:53:41 PM | Info | Target Volume: Macintosh HD, mount: /Volumes/Macintosh HD 1, device: /dev/disk0s2, media: WDC WD5000BEVT-22ZAT0, interconnect: Internal SATA, file system: "Journaled HFS+", OS: N/A, capacity: 465.44 GB, used: 0.11 GB, directories: 4, files: 8, ejectable: NO, ACLs: Disabled
    | 11:53:41 PM | Info | Copy Mode : Erase, then copy files
    | 11:53:41 PM | Info | Copy Script : Backup - all files.dset
    | 11:53:41 PM | Info | Transcript : BuildTranscript.plist
    | 11:53:42 PM | Info | PHASE: 1. Prepare to Copy Files
    | 11:53:42 PM | Info | ...ACTION: Preparing Macintosh HD
    | 11:53:42 PM | Info | ......COMMAND => Verifying the integrity of volinfo.database
    | 11:53:42 PM | Info | volinfo.database OK
    | 11:53:42 PM | Info | ......COMMAND => Enabling permissions on Macintosh HD
    | 11:53:42 PM | Info | Refreshing Disk Arbitration ...
    | 11:53:43 PM | Info | ......COMMAND => Verifying that permissions are enabled for Macintosh HD
    | 11:53:43 PM | Info | Permissions on '/' are enabled.
    | 11:53:43 PM | Info | ...ACTION: Repairing permissions on Macintosh HD
    | 11:53:43 PM | Info | ......COMMAND => Repairing permissions on Macintosh HD
    | 11:53:49 PM | Info | parent directory ./Users/Shared/SC Info does not exist
    | 11:54:21 PM | Info | Started verify/repair permissions on disk disk2s2 Macintosh HD
    | 11:54:21 PM | Info | Determining correct file permissions.
    | 11:54:21 PM | Info | User differs on ./Applications/Utilities/Activity Monitor.app/Contents/Resources/English.lproj/ActivityMonitorHelp, should be 0, owner is 99
    | 11:54:21 PM | Info | Group differs on ./Applications/Utilities/Activity Monitor.app/Contents/Resources/English.lproj/ActivityMonitorHelp, should be 80, group is 99
    | 11:54:21 PM | Info | Permissions differ on ./Applications/Utilities/Activity Monitor.app/Contents/Resources/English.lproj/ActivityMonitorHelp, should be drwxrwxr-x , they are drwxr-xr-x
    | 11:54:21 PM | Info | Owner and group corrected on ./Applications/Utilities/Activity Monitor.app/Contents/Resources/English.lproj/ActivityMonitorHelp
    | 11:54:21 PM | Info | Permissions corrected on ./Applications/Utilities/Activity Monitor.app/Contents/Resources/English.lproj/ActivityMonitorHelp
    | 11:54:21 PM | Info | Group differs on ./Applications/Utilities/AirPort Setup Assistant.app/Contents/Resources/English.lproj/InfoPlist.strings, should be 80, group is 224
    | 11:54:21 PM | Info | Owner and group corrected on ./Applications/Utilities/AirPort Setup Assistant.app/Contents/Resources/English.lproj/InfoPlist.strings
    | 11:54:21 PM | Info | Permissions corrected on ./Applications/Utilities/AirPort Setup Assistant.app/Contents/Resources/English.lproj/InfoPlist.strings
    | 11:54:21 PM | Info | User differs on ./Library/Printers/EPSON/CIOSupport, should be 0, owner is 99
    | 11:54:21 PM | Info | Group differs on ./Library/Printers/EPSON/CIOSupport, should be 80, group is 99
    | 11:54:21 PM | Info | Permissions differ on ./Library/Printers/EPSON/CIOSupport, should be drwxrwxr-x , they are drwxr-xr-x
    | 11:54:21 PM | Info | Owner and group corrected on ./Library/Printers/EPSON/CIOSupport
    | 11:54:21 PM | Info | Permissions corrected on ./Library/Printers/EPSON/CIOSupport
    | 11:54:21 PM | Info | User differs on ./Library/Printers/EPSON/FireWire.plugin, should be 0, owner is 99
    | 11:54:21 PM | Info | Group differs on ./Library/Printers/EPSON/FireWire.plugin, should be 80, group is 99
    | 11:54:21 PM | Info | Permissions differ on ./Library/Printers/EPSON/FireWire.plugin, should be drwxrwxr-x , they are drwxr-xr-x
    | 11:54:21 PM | Info | Owner and group corrected on ./Library/Printers/EPSON/FireWire.plugin
    | 11:54:21 PM | Info | Permissions corrected on ./Library/Printers/EPSON/FireWire.plugin
    | 11:54:21 PM | Info | User differs on ./Library/Printers/EPSON/InkjetPrinter/SP830Series.plugin, should be 0, owner is 99
    | 11:54:21 PM | Info | Group differs on ./Library/Printers/EPSON/InkjetPrinter/SP830Series.plugin, should be 80, group is 99
    | 11:54:21 PM | Info | Permissions differ on ./Library/Printers/EPSON/InkjetPrinter/SP830Series.plugin, should be drwxrwxr-x , they are drwxr-xr-x
    | 11:54:21 PM | Info | Owner and group corrected on ./Library/Printers/EPSON/InkjetPrinter/SP830Series.plugin
    | 11:54:21 PM | Info | Permissions corrected on ./Library/Printers/EPSON/InkjetPrinter/SP830Series.plugin
    | 11:54:21 PM | Info | User differs on ./Library/Printers/EPSON/InkjetPrinter, should be 0, owner is 99
    | 11:54:21 PM | Info | Group differs on ./Library/Printers/EPSON/InkjetPrinter, should be 80, group is 99
    | 11:54:21 PM | Info | Permissions differ on ./Library/Printers/EPSON/InkjetPrinter, should be drwxrwxr-x , they are drwxr-xr-x
    | 11:54:21 PM | Info | Owner and group corrected on ./Library/Printers/EPSON/InkjetPrinter
    | 11:54:21 PM | Info | Permissions corrected on ./Library/Printers/EPSON/InkjetPrinter
    | 11:54:21 PM | Info | Symbolic link ./Library/Printers/EPSON/LaserPrinter/Common/PageLibraries/PPBuryInfo.framework /PPBuryInfo->Versions/Current/PPBuryInfo repaired
    | 11:54:21 PM | Info | Symbolic link ./Library/Printers/EPSON/LaserPrinter/Common/PageLibraries/PPBuryInfo.framework /Resources->Versions/Current/Resources repaired
    | 11:54:21 PM | Info | User differs on ./Library/Printers/EPSON/LaserPrinter, should be 0, owner is 99
    | 11:54:21 PM | Info | Group differs on ./Library/Printers/EPSON/LaserPrinter, should be 80, group is 99
    | 11:54:21 PM | Info | Permissions differ on ./Library/Printers/EPSON/LaserPrinter, should be drwxrwxr-x , they are drwxr-xr-x
    | 11:54:21 PM | Info | Owner and group corrected on ./Library/Printers/EPSON/LaserPrinter
    | 11:54:21 PM | Info | Permissions corrected on ./Library/Printers/EPSON/LaserPrinter
    | 11:54:21 PM | Info | User differs on ./Library/Printers/EPSON/Libraries, should be 0, owner is 99
    | 11:54:21 PM | Info | Group differs on ./Library/Printers/EPSON/Libraries, should be 80, group is 99
    | 11:54:21 PM | Info | Permissions differ on ./Library/Printers/EPSON/Libraries, should be drwxrwxr-x , they are drwxr-xr-x
    | 11:54:21 PM | Info | Owner and group corrected on ./Library/Printers/EPSON/Libraries
    | 11:54:21 PM | Info | Permissions corrected on ./Library/Printers/EPSON/Libraries
    | 11:54:21 PM | Info | User differs on ./Library/Printers/EPSON/PAP.plugin, should be 0, owner is 99
    | 11:54:21 PM | Info | Group differs on ./Library/Printers/EPSON/PAP.plugin, should be 80, group is 99
    | 11:54:21 PM | Info | Permissions differ on ./Library/Printers/EPSON/PAP.plugin, should be drwxrwxr-x , they are drwxr-xr-x
    | 11:54:21 PM | Info | Owner and group corrected on ./Library/Printers/EPSON/PAP.plugin
    | 11:54:21 PM | Info | Permissions corrected on ./Library/Printers/EPSON/PAP.plugin
    | 11:54:21 PM | Info | User differs on ./Library/Printers/EPSON/TCPIP.plugin, should be 0, owner is 99
    | 11:54:21 PM | Info | Group differs on ./Library/Printers/EPSON/TCPIP.plugin, should be 80, group is 99
    | 11:54:21 PM | Info | Permissions differ on ./Library/Printers/EPSON/TCPIP.plugin, should be drwxrwxr-x , they are drwxr-xr-x
    | 11:54:21 PM | Info | Owner and group corrected on ./Library/Printers/EPSON/TCPIP.plugin
    | 11:54:21 PM | Info | Permissions corrected on ./Library/Printers/EPSON/TCPIP.plugin
    | 11:54:21 PM | Info | User differs on ./Library/Printers/EPSON/USB.plugin, should be 0, owner is 99
    | 11:54:21 PM | Info | Group differs on ./Library/Printers/EPSON/USB.plugin, should be 80, group is 99
    | 11:54:21 PM | Info | Permissions differ on ./Library/Printers/EPSON/USB.plugin, should be drwxrwxr-x , they are drwxr-xr-x
    | 11:54:21 PM | Info | Owner and group corrected on ./Library/Printers/EPSON/USB.plugin
    | 11:54:21 PM | Info | Permissions corrected on ./Library/Printers/EPSON/USB.plugin
    | 11:54:21 PM | Info | User differs on ./System/Library/CoreServices/SKPlugins, should be 0, owner is 99
    | 11:54:21 PM | Info | Group differs on ./System/Library/CoreServices/SKPlugins, should be 0, group is 99
    | 11:54:21 PM | Info | Owner and group corrected on ./System/Library/CoreServices/SKPlugins
    | 11:54:21 PM | Info | Permissions corrected on ./System/Library/CoreServices/SKPlugins
    | 11:54:21 PM | Info | Permissions differ on ./private/var/log/secure.log, should be -rw------- , they are -rw-r-----
    | 11:54:21 PM | Info | Owner and group corrected on ./private/var/log/secure.log
    | 11:54:21 PM | Info | Permissions corrected on ./private/var/log/secure.log
    | 11:54:21 PM | Info | The privileges have been verified or repaired on the selected volume
    | 11:54:21 PM | Info | Verify/repair finished permissions on disk disk2s2 Macintosh HD
    | 11:54:21 PM | Info | ...ACTION: Erasing Macintosh HD
    | 11:54:21 PM | Info | ......COMMAND => Preserving Macintosh HD UUID
    | 11:54:22 PM | Info | 11FFCEFABA43DE77
    | 11:54:22 PM | Info | ......COMMAND => Preserving spotlight indexing state
    | 11:54:22 PM | Info | ......COMMAND => Erasing Macintosh HD
    | 11:54:29 PM | Info | ......COMMAND => Restoring Macintosh HD UUID (11FFCEFABA43DE77)
    | 11:54:30 PM | Info | 11FFCEFABA43DE77
    | 11:54:30 PM | Info | ......COMMAND => Restoring Spotlight search indexing state on Macintosh HD
    | 11:54:30 PM | Info | /Volumes/Macintosh HD 1:
    | 11:54:30 PM | Info | Indexing enabled for volume.
    | 11:54:30 PM | Info | Indexing enabled on Macintosh HD
    | 11:54:30 PM | Info | ...ACTION: Preparing Macintosh HD
    | 11:54:30 PM | Info | ......COMMAND => Enabling permissions on Macintosh HD
    | 11:54:30 PM | Info | Refreshing Disk Arbitration ...
    | 11:54:30 PM | Info | ......COMMAND => Verifying that permissions are enabled for Macintosh HD
    | 11:54:30 PM | Info | Permissions on '/Volumes/Macintosh HD 1' are enabled.
    | 11:54:30 PM | Info | ......COMMAND => Verifying that Macintosh HD ACL support matches Macintosh HD
    | 11:54:30 PM | Info | ...ACTION: Preserving Spotlight state on Macintosh HD
    | 11:54:30 PM | Info | ......COMMAND => Disabling Spotlight search indexing on Macintosh HD
    | 11:54:30 PM | Info | PHASE: 2. Copy Files
    | 11:54:30 PM | Info | ...ACTION: Copying files from Macintosh HD to Macintosh HD
    | 11:54:30 PM | Info | ......COMMAND => Cloning Macintosh HD to Macintosh HD
    | 11:54:30 PM | Info | Copying copy files using script: /Users/PaulLau/Library/Application Support/SuperDuper!/Copy Scripts/Standard Scripts/Backup - all files.dset
    | 11:54:31 PM | Info | Loading 22 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude system temporary files.dset
    | 11:54:31 PM | Info | Loading 6 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude system cache files.dset
    | 11:54:31 PM | Info | Loading 1 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude Norton FileSaver files.dset
    | 11:54:31 PM | Info | Loading 1 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude Google Desktop Index files.dset
    | 11:54:31 PM | Info | Loading 1 commands from copy script /Applications/SuperDuper!.app/Contents/Resources/Copy Scripts/Exclude iTunes Temporary files.dset
    | 11:54:31 PM | Info | Loading 0 commands from copy script /Users/PaulLau/Library/Application Support/SuperDuper!/Copy Scripts/Standard Scripts/Backup - all files.dset
    | 11:54:31 PM | Info | /
    | 11:54:34 PM | Info | /cores
    | 11:54:34 PM | Info | /.HFS+ Private Directory Data
    | 11:54:34 PM | Info | Ignoring /.hotfiles.btree
    | 11:54:34 PM | Info | /automount
    | 11:54:34 PM | Info | /Users
    | 01:15:50 AM | Info | Ignoring /Users/PaulLau/Music/iTunes/Temp File.tmp
    | 01:29:23 AM | Info | /usr
    | 01:37:30 AM | Error | ***FAILED***: result=256 errno=22 (Unknown error: 0)
    Carbon Copy:
    (CCC.log)
    Operating System: Version 10.4.11 (Build 8S2167)
    Hardware:
    hw.machine: i386
    hw.model: MacBookPro2,2
    hw.logicalcpu: 2
    hw.physmem: 2147483648
    vm.loadavg: 0.23 0.10 0.15
    Task: Disk-to-disk clone
    Source: Macintosh HD (/dev/disk2s2, 54DEB44B-185A-3372-AA7F-5D7B3AC8ED8D)
    Mount point: /
    Filesystem: hfs
    Capacity: 111.47 GB
    Used: 93.99 GB
    Available: 17.48 GB
    Mac OS X version: 10.4.11
    Target: Macintosh HD (/Volumes/Macintosh HD 1/ [/dev/disk0s2, 29D1F59F-2B8F-3AF5-8684-948A10EB6524])
    Mount point: /Volumes/Macintosh HD 1
    Filesystem: hfs
    Capacity: 465.44 GB
    Used: 108.80 MB
    Available: 465.34 GB
    Mac OS X version: Mac OS not installed
    Bootability: This volume will be bootable.
    Cloning method: Backup everything
    Delete items on target that aren't on the source: No
    02:00:11 The target volume has ownership enabled.
    02:00:11 The target volume has Access Control Lists enabled.
    02:00:11 Authenticating...
    02:00:13 Initiating synchronization engine...
    02:00:15 Cloning...
    02:53:46 rsync: readlink_stat("/Library/Printers/Canon/BJPrinter/Frameworks/BJVersionControl.fr amework/Versions/Current") failed: Invalid argument (22) (51)
    02:54:13 rsync: readlink_stat("/Library/Printers/EPSON/InkjetPrinter/Halftone/HalftoneIIMo.fram ework/Versions/Current") failed: Invalid argument (22) (51)
    04:22:37 rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5/main.c(104 7) [sender=3.0.5] (51)
    04:22:37 rsync: Some errors were encountered during the backup., Error code: 51
    04:22:38 Sync Engine warnings: (
    "rsync: readlink_stat(\"/Library/Printers/Canon/BJPrinter/Frameworks/BJVersionControl.f ramework/Versions/Current\") failed: Invalid argument (22)",
    "rsync: readlink_stat(\"/Library/Printers/EPSON/InkjetPrinter/Halftone/HalftoneIIMo.fra mework/Versions/Current\") failed: Invalid argument (22)",
    "rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5/main.c(104 7) [sender=3.0.5]"
    (console.log)
    Disk Utility started.
    Preparing to erase : “Macintosh HD”
    Creating Partition Map
    Formatting Disk
    Erase complete.
    crontab: no crontab for PaulLau
    2009-05-14 08:03:47.562 SuperDuper![3102] .scriptSuite warning for attribute 'boundsAsQDRect' of class 'NSWindow' in suite 'NSCoreSuite': 'NSData<QDRect>' is not a valid type name.
    2009-05-14 08:03:47.563 SuperDuper![3102] .scriptSuite warning for type 'NSTextStorage' attribute 'name' of class 'NSApplication' in suite 'NSCoreSuite': AppleScript name references may not work for this property because its type is not NSString-derived.
    2009-05-14 08:03:47.563 SuperDuper![3102] .scriptSuite warning for type 'NSTextStorage' attribute 'lastComponentOfFileName' of class 'NSDocument' in suite 'NSCoreSuite': AppleScript name references may not work for this property because its type is not NSString-derived.
    2009-05-14 08:03:47.563 SuperDuper![3102] .scriptSuite warning for type 'NSTextStorage' attribute 'title' of class 'NSWindow' in suite 'NSCoreSuite': AppleScript name references may not work for this property because its type is not NSString-derived.
    2009-05-14 08:03:47.563 SuperDuper![3102] .scriptSuite warning for attribute 'boundsAsQDRect' of class 'NSWindow' in suite 'NSCoreSuite': 'NSData<QDRect>' is not a valid type name.
    2009-05-14 08:03:47.563 SuperDuper![3102] .scriptSuite warning for superclass of class 'NSAttachmentTextStorage' in suite 'NSTextSuite': 'NSString' is not a valid class name.
    firefox-bin(3107,0xa000d000) malloc: * Deallocation of a pointer not malloced: 0x1; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug
    Message was edited by: beat4dasoul

    Complete what Kurt has told you first. Then - if you use CCC - check the details in
    B4 U post...
    noting especially the two links to details for preparation of a target drive and the "Proof of pudding" test.
    Then make use of this section of CCC Help.
    BTW, having both source and target with the same name is an invitation to a mistake. Rename one or both of them. Use meaningful names to make life easier (and safer) for yourself. Select a volume's icon in the Finder, hit <return>, type the new name, hit <return> again. The OS will notice the new name(s) immediately. Use only simple alphanumeric characters, preferably with no spaces. Even something boring like "myCloneVolume" would be better than what you currently have.
    Andreas

  • What exactly is a Carbon Copy Cloner and does it work on iMac Intel?

    A friend of mine recommended to me that carbon copy cloner is the best way to back up data including applications and that it is a freeware downloadable via their website. Can anyone explain to me (using layman's language) what exactly it is and give me a step by step procedure on what I have to do to make it work? Also, does it work on iMac Intel and if so, would I have to set anything differently??
    FYI, I do have a La Cie firewire drive.

    Did you check out their website? It really has a lot of info, but here it is in a nutshell.
    CCC is a cloning software tool. It will make an exact - and bootable - copy of every last bit and byte on your internal drive. You can then use that FireWire drive to boot up your Mac, or restore the data from it in case of an emergency, drive replacement or failure.
    It is not universal yet, but it does run through Rosetta.
    Download the program and there is a PDF file with all the step by step instructions, but it is really easy to use.
    BTW, LaCie has a program that is very similar called SilverKeeper.

  • Exchange 2010 - the SMTP RCPT TO and the header does not match (Carbon Copy disappears)

    Dear All I have to investigate on a weird message which is carbon copied to many people who did not receive it.
    As a matter of fact the SmtpReceives log recorded ONLY one person, directly addressed. I mean one SMTP RCPT TO. And the "Message Traking Results" is wholly consistent with it (with only one STOREDRIV). [Server version 14.3 (Build 123.4)]
    Unfortunately Outlook 2010 shows a rather different header; in fact three CC are reported.
    Any idea how to debug it? In my opinion it just a sender fault; one rcpt to settles things once and for all!
    <,MAIL From:<[email protected]> SIZE=9455 BODY=8BITMIME,
    >,250 2.1.0 Sender OK,
    <,RCPT To:<[email protected]>,
    <,DATA,
    >,354 Start mail input; end with <CRLF>.<CRLF>,
    >,250 2.6.0 <[email protected]> [InternalId=556164] Queued mail for delivery,
    <,QUIT,
    Thanks in advance.
    Here's the Outlook 2010 message property:
    Received: from deliver.hol.gr (62.38.3.39) by myMailer.myDomain.it (172.20.1.46) with Microsoft SMTP Server (TLS) id 14.3.210.2; Thu, 13 Nov 2014 10:37:54 +0100
    Received: from auth-smtp.hol.gr (takeit01.mail.dc.hol.net [192.168.20.71]) by deliver.hol.gr (8.12.11/8.11.6) with ESMTP id sAD9bo8a027674  (using TLSv1/SSLv3 with cipher DHE-RSA-AES256-SHA (256 bits) verified FAIL) for [email protected]>; Thu, 13 Nov
    2014 11:37:50 +0200
    Received: from INTERNETPC-7.technomar.gr ([194.30.250.147]) (authenticated bits=0) by auth-smtp.hol.gr (8.13.1/8.13.1) with ESMTP id sAD9bmK9009834 for <[email protected]>; Thu, 13 Nov 2014 11:37:49 +0200
    From: <[email protected]>
    To: <[email protected]>
    Date: Thu, 13 Nov 2014 11:37:48 +0200
    Subject: Fw: Re: myTitle
    CC: <[email protected]>, <[email protected]>,
    Message-ID: <[email protected]>
    MIME-Version: 1.0
    Content-Type: text/plain; charset="iso-8859-7"
    Content-Transfer-Encoding: 7bit
    X-Mailer: Softway Communicator Mailer, SOFTWAY LTD. Piraeus GREECE
    X-Virus-Scanned: ClamAV version 0.94.2, clamav-milter version 0.94.2 on takeit01.mail.dc.hol.net
    X-Virus-Status: Clean
    Return-Path: [email protected]
    X-MS-Exchange-Organization-AuthAs: Anonymous
    X-MS-Exchange-Organization-PRD: technomar.gr
    X-MS-Exchange-Organization-SenderIdResult: None
    Received-SPF: None (myMailer.myDomain.local: [email protected] does not designate permitted sender hosts)
    X-MS-Exchange-Organization-Antispam-Report: ContentFilterConfigBypassedSender
    X-MS-Exchange-Organization-SCL: -1

    I'm not sure what the question is here, so I'll see if I can go through your command sequences to figure it out.  You have a user with outlook who sent a message to a single recipient with two in the CC line.  In your SMTP sequence, that is the
    RCPT to: [email protected] line.  You have no other recipients on the To: line, so any other recipients will be in the DATA section of the message.  I don't see any info in your
    SMTP sequence that shows what the subject and CC lines were set to, so I'm going to assume those are not included in this information.
    Now, since the To: line is covered in the RCPT To: line, and you agree that there was one recipient on that line, what question are we working on?  If it's where the Cc: line recipients are, as I said, they should be in the DATA section which wasn't
    included.  Does that help?

  • Mountain Lion is missing, after installing an external hard drive and Carbon Copy Clone.

    I have a mid-2007 desktop iMac Model MA877LL, 2.4 ghz/1gb/320gb, with 4 GB memory, upgraded to Mountain Lion 9/7/2012 at an Apple store (now 10.8.5).  I just installed a new external hard drive Fantom Drive 1T G-Force Mega Disk Firewire 800, then installed Carbon Copy Clone successfully.  However, I could not get the clone to boot from the backup volume.  Mountain Lion showed in both Macintosh HD and External Hard Drive at that point.  After working through many steps with CCC, trying to get it to boot, the final suggestion was to try installing Mountain Lion onto the backup disk via the Mac App Store Installer.   As my Mountain Lion was installed at an Apple store, there's no record of it on line and I can't find an installer, although I've been doing updates as they're issued.  Per article, "OS X:  Installing OS X on an external volume", I erased and reformatted the storage device.  Now, checking my Macintosh HD, Mountain Lion is gone.  How do I get it back?

    Woodswalker wrote:
    ...Per article, "OS X:  Installing OS X on an external volume", I erased and reformatted the storage device.  Now, checking my Macintosh HD, Mountain Lion is gone.  How do I get it back?
    Are you saying that your internal HD doesn't have an operating system on it either, meaning you can't boot your iMac at all? Or that the external was also named "Macintosh HD" in which case, having been erased and reformatted (hopefully with a GUID partition table), you'll need to clone your internal to it once again.

Maybe you are looking for

  • HT204406 Adding my library to iTunes Match

    I just purchased a subscription to iTunes Match and during step 3 of the 'add this computer' portion I get an error and iTunes needs to close.  This aborts the uploading of my library.  The end result is I have purchased Match, but cannot use it.

  • Rawmaterial

    Hi I have procured some material as ROH, but it has not been used for a long time so quality is reduced. I want to sell this material instead of sending back to vender or put into scrap. Is it possible to sell a raw material to some other customer. i

  • Submit button image dosen't work...

    Hi! I have a html page with a form (start a servlet) in and it works without problems when I use an <imput type=submit.... if I change this with an image button.... I have an "Internal Server Error" .... Why? whats the difference? Thanks, Calin

  • Error updating CS6

    I receive the following message when I try updating my CS6: There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49.  How can I update my software?

  • Cannot Install or Update the iTunes software- Nothing is working

    I purchased a ipod Touch and plugged it into my Dell laptop. It knows it's attached but the software that I need refuses to update or recognize the new ipod. When I tried to follow the steps laid out in a prev. post it did nothing to solve the proble