Spam blocker in Outlook 2010 is not working.

I go into the program and add to the list of domains I want to block. It just does not work.
I am blocking them by going into Junk via opposite mouse button and then options and the Block Senders tab and then I click on add.
I add a domain as @donotwant.com  click apply and then OK.   I see it in the list even after I close Outlook and go back in.
Yet the emails are still ending up in my junk folder from that sender!!!  I have seen this problem mentioned by others on the web.
If this is a bug in 2010 then it should be fixed!!  if I am doing something incorrectly, please inform me.   Is  there a possible space being added to the end of the string by Microsoft that I can not see but is causing the problem?  
(I can not believe that the programmer who wrote this stuff would not use a trim string command to avoid the issue)
(My gosh from a programming standpoint this should be easy for Outlook.  Compare the list of blocked addresses to the incoming new emails and block the ones that match it on the list.  I think a Junior High School programmer can handle it.  
The kid would certainly Use an INString command to pull the domains that are blocked.) 
Not blocking these is really annoying.  I would appreciate any help offered.
Thank you

Hi,
This is the default behavior for emails sent from blocked senders in case some users want to check the email in the Junk Email folder.
If you want to permanently delete emails from a domain senders, we can set an Outlook rule to do this. Please follow the steps below:
1. Click on Home tab > Rules >
Manage Rules & Alert
2. Click New Rule…
3. Select “Apply rule on message I send”, click Next button.
4. Tick the check box before “with specific words in the sender’s address” in the
Select condition(s) box. Click
specific words and type @domain.com (you need type @donotwant.com) in the box and click
Add button. Click OK.
5. Click Next.
6. Select the action “permanently delete it”. Click Next. Click Next.
7. Make sure the option “Turn on this rule” is selected. Click Finish.
Now, all emails from @domain.com will be permanently deleted.
In addition, we can consider to set block list on the server side to prevent the emails sending to your mailbox.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Similar Messages

  • Blocked Senders feature in Outlook 2010 does not work

    I have a specific blocked sender
    [email protected] listed in my Blocked Senders list, but emails from that email
    address still go to my Inbox instead of the Junk E-mail folder. 
    We use Exchange for email, and Outlook 2010 as the client.
    Note: this sender is blocked for a specific sender that he configured through Junk E-mail Options in Outlook 2010, and this sender is not blocked at the server level.
    I only have one account set up in Outlook. 
    What do I need to do to get Blocked Senders / Junk E-mail working in Outlook?
    Thanks,
    Elizabeth

    Hi,
    From your description, I suggest you try to check the total size of blocked sender list. As total size of all lists combined cannot exceed 512K. Once the 512K limit
    is reached, Outlook alerts you and additional addresses aren't saved until you remove some from the list.
    If your issue is caused by the limited size, you can add a new registry key value to the following registry key:
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MSExchangeIS\ParametersSystem\
    Add a new DWORD value of Type Max Extended Rule Size and edit the Value Data, entering the maximum size (in bytes) you want to allow.
    If your issue is not related to limited size, try to keep your junk e-mail filter updated. Each version of Microsoft Outlook that contains a junk e-mail filter receives updates to the data
    file (outlfltr.dat) as part of the Microsoft-wide monthly update released on the second Tuesday of each month. The updated outlfltr.dat is the result of the evaluation of hundreds of thousands of spam messages and constantly increases the filter “catch”
    rate for incoming junk email.
    The recommended way to obtain updates to the Outlook Junk E-mail filter is by turning on the Automatic Updates option in the Windows Security Center.
    If you have done all above but it still not work, try to create a new outlook profile to test this issue.
     Go to Start > Control Panel, click Mail. The title bar of the Mail Setup dialog box contains the name of the current profile. To select a different
    existing profile, click Show Profiles, select the profile name, and then click Properties.
     Click Show Profiles. Choose Prompt for a profile to be used.
     Click Add.
     Type a name for the profile, and then click OK.
     Start Outlook, and choose this new profile.
    Sincerely,
    Harry 

  • Outlook 2010 Search Not Working

    Hi All,
    After resequencing office a number of times and following the AppV recipie at http://support.microsoft.com/kb/983462 I still can't get Outlook 2010 to play nicely.
    My sequencing and operating environment is Windows 7 32-bit.
    I have configured the proxies according to the AppV recipie and run the client installer but I still cannot get it to work.
    msiexec /i C:\offvirt.msi ADDDEFAULT="Click2runOneNoteProxy,Click2runOutlookProxies,Click2runWDSProxy,Click2runOWSSuppProxies" PACKAGEGUID="{782EF558-1977-466C-B5A8-0975B2996E67}" PACKAGEVERSION=14.0.4755.1000 OUTLOOKNAME="Microsoft Outlook 2010" ONENOTENAME="Microsoft
    OneNote 2010" MAPISERVER="Microsoft Virtual Office Simple Mapi Proxy Server" VIRTUALSEARCHHOST="Search MAPI Protocol Handler Host" MLCFG32CPL="Windows Control Panel" OWSSUPPServer="Microsoft SharePoint Client Support Manager"
    Is what I use to install the deployment kit and all the values in the arguments are 100% correct.
    However the actual registry keys do not reflect what I have entered into the Arguments.
    When looking at "HKLM\Software\Microsoft\Office\14.0\CVH\" keys they all have strange values.
    "Click2runOutlookProxies\MapiProxyServer" for example is set to "C:\Program Files\Microsoft Application Virtualization Client\sfttray.exe" "Simple MAPI Proxy Server "
    This is obviously wrong as it's not what I specified. I corrected these manually to:
    "C:\Program Files\Microsoft Application Virtualization Client\sfttray.exe" "Microsoft Virtual Office Simple Mapi Proxy Server 14.0.4755.1000"
    In an attempt to get it to work and the AppV client succeeded in starting the "Search MAPI Protocol Handler".
    Despite this no matter what I search for and where I search for it I get "No matches".
    It does appear to index the items but doesn't appear to be able to contact desktop search to even try to get a response.
    Any help would be much appreciated!

    Try creating a CVH.reg file and populate the keys with your package GUID and versions:
    x86
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\14.0\CVH]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\14.0\CVH\Click2RunFilterPack]
    @=""
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\14.0\CVH\Click2runOneNoteProxy]
    @="{83287C5A-4D30-4708-8C97-C65CE31FA8D0}"
    "OneNote"="\"C:\\Program Files\\Microsoft Application Virtualization Client\\sfttray.exe\" \"Microsoft OneNote 2010 092210A\""
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\14.0\CVH\Click2runOutlookProxies]
    @="{83287C5A-4D30-4708-8C97-C65CE31FA8D0}"
    "MapiProxyServer"="\"C:\\Program Files\\Microsoft Application Virtualization Client\\sfttray.exe\" \"Microsoft Virtual Office Simple Mapi Proxy
    Server 092210A\""
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\14.0\CVH\Click2runOWSSuppProxies]
    @="{83287C5A-4D30-4708-8C97-C65CE31FA8D0}"
    "ProxyServer"="\"C:\\Program Files\\Microsoft Application Virtualization Client\\sfttray.exe\" \"Microsoft SharePoint Client Support Manager
    092210A\""
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office\14.0\CVH\Click2runWDSProxy]
    @="{83287C5A-4D30-4708-8C97-C65CE31FA8D0}"
    "WDSProxyServer"="\"C:\\Program Files\\Microsoft Application Virtualization Client\\sfttray.exe\" \"Search MAPI Protocol Handler Host 092210A\""
    x64
    [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Office\14.0\CVH]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Office\14.0\CVH\Click2RunFilterPack]
    @=""
    [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Office\14.0\CVH\Click2runOneNoteProxy]
    @="{83287C5A-4D30-4708-8C97-C65CE31FA8D0}"
    "OneNote"="\"C:\\Program Files (x86)\\Microsoft Application Virtualization Client\\sfttray.exe\" \"Microsoft OneNote 2010 092210A\""
    [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Office\14.0\CVH\Click2runOutlookProxies]
    @="{83287C5A-4D30-4708-8C97-C65CE31FA8D0}"
    "MapiProxyServer"="\"C:\\Program Files (x86)\\Microsoft Application Virtualization Client\\sfttray.exe\" \"Microsoft Virtual Office Simple Mapi Proxy
    Server 092210A\""
    [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Office\14.0\CVH\Click2runOWSSuppProxies]
    @="{83287C5A-4D30-4708-8C97-C65CE31FA8D0}"
    "ProxyServer"="\"C:\\Program Files (x86)\\Microsoft Application Virtualization Client\\sfttray.exe\" \"Microsoft SharePoint Client Support Manager
    092210A\""
    [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Office\14.0\CVH\Click2runWDSProxy]
    @="{83287C5A-4D30-4708-8C97-C65CE31FA8D0}"
    "WDSProxyServer"="\"C:\\Program Files (x86)\\Microsoft Application Virtualization Client\\sfttray.exe\" \"Search MAPI Protocol
    Handler Host 092210A\""

  • Sync with Outlook 2010 does not work

    While it seems to work, showing the normal progess bar in iTunes - taking some time and feels like normal, no data is transferred from or to outlook.
    No difference with Outlook x32 and x64, iTunes is 10.2.2 x64.
    Reinstalled office and iTunes several times, making empty outlook.pst etc. but still i can't get data from the phone to outlook.
    Any ideas would be aprreciated.

    RIM has formally announced that support for Outlook 2010 will be available this month.  I've heard rumors of August 10th but that's not official.  Regardless, a new Desktop Manager will be released very shortly to add support for Outlook 2010 and some other great features.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Default account setting in Outlook 2010 does not work when composing new messages?

    Hello,
    I am currently using Outlook 2010 (not beta). I have two accounts, a google imap account and a pop3 account.  I have designated my IMAP account as my default account.  As I understand it, this means that when I create a new email,
    it should default to being sent from my IMAP account.  However, whenever I create a new email, it defaults to the account which I am currently viewing in Outlook.  In other words, if I am currently viewing the pop3 inbox, when I compose an email,
    it will default send from that account.  Conversely, when I compose an email while viewing the IMAP inbox, it will default send from that account. 
    Any ideas as to what is going on?  This is rather frustrating because I only rarely send with my pop3 account--only when replying/forwarding email received with that account or other unique situations.  Is there a way to make Outlook be true to
    sending from the default account, without doing something drastic like disabling the secondary account?
    Thanks in advance.
    Rom

    Of course it's a bug.
    Computing Dictionary
    bug definition
    programming 
     An unwanted and unintended property of a program or piece ofhardware, especially one that causes it to malfunction.
    The behaviour itself may be considered a feature by Microsoft, though I disagree, but the fact that one thinks one is specifying a "default" account that is not then used as the default in all cases is clearly a bug.
    It is astonishing to me that in the plethora of options, advanced options and advanced advanced options there is not a checkbox to enable this new behaviour with the default being unchecked.
    Microsoft does it again.

  • Outlook 2010 Hyperlink not working

    Windows 7 machine with Office 2010. I just had to rework my computer because my HHD had a melt down. After buying a new HHD and reinstalling all of my software i am having issues with my Outlook Emails. When i open an email with a link, when i click it i
    get an orange bars scrolling across the email box. It's like it's actively blocking the link from opening. I have tried to disable my anti virus and spyware and that doesn't help. I am also using firefox instead of IE. I know there is a working setting because
    it worked just fine before my re-install. Please don't post any solutions that require me to use IE because I refuse to use it.
    Thanks
    I just went into my Defaults and opened the Set program access. I have a custom configuration active and in it under default browser the "use my current web browser" is checked and both IE and FF are Enabled. I have tried to change the selections
    just to see what would happen and they go back to use current when i reopen the set program access window. It's not saving my changes.
    In my default programs / File associations the .htm and .html are associated with Firefox.
    I was just looking back at a few changes i made recently that might have caused this. On another forum i read about fixing an Outlook error i was getting. I ran a fixit posted there and i believe this current problem started after that "FIX". Here
    is a link.
    http://support.microsoft.com/kb/813745

    that orange bar is there to tell you that your email isn't completely loaded yet. If you look at an old email, it will no longer be there. Just on the newest ones because
    it's supposedly still downloading. No way to get rid of it.
    regards,
    csaba

  • Outlook autodiscover is not working for some users in coexistence

    Hi
    We are doing exchnage 2013/2010 coexistence
    Most everything is ok BUT outlook autodiscover is not working for some exchange 2010 users now that 2013 is in the front!!!.  We end up creating the profiles manually.  It has affected some but not all the users.
    I followed the instructions here but it didn't help.
    http://blogs.technet.com/b/tips_from_the_inside/archive/2012/01/11/autodiscover-fails-for-one-or-more-users.aspx
    Using outlook 2010, 2013, patches, .... didn't make a difference
    Would you please help?
    Thank you

    Hi 
    If it is affecting only few handful of users i could suspect a mailbox corruption and would recommend to move mailbox and see the results.
    Also you can try below
    You need to set the values MaxFieldLength, MaxRequestBytes & MaxTokenSize to below on Exchange 2010 CAS servers as well as Exchange 2013 CAS servers
    Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
    Name: MaxFieldLength
    Type: DWORD
    Value: 65534
    Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
    Name: MaxRequestBytes
    Type: DWORD
    Value: 16777216
    Path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters
    Name: MaxTokenSize
    Type: REG_DWORD
    Value: 48000 
    Just reboot the servers once its done and you will be good to go.
     References
    https://social.technet.microsoft.com/Forums/en-US/cc2929ac-4d36-4e84-a567-ce9b3bec1398/http-400-bad-request-on-iis-8-exchange-2013-cu2-on-windows-server-2012-autodiscovery-is-not?forum=exchangesvrgeneral
    http://blogs.technet.com/b/kristinw/archive/2013/03/28/recommended-changes-and-enhancements-to-support-exchange-in-an-enterprise-environment-whew.aspx
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
    (MVP)

  • I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010.  It worked fine before with iCloud 2.1.2.  Any solutions?  I'm on Windows 7, Outlook 2010.

    I recently upgraded to iCloud 3.0 on home computer and now i get error messages when I open Outlook 2010.  It worked fine before with iCloud 2.1.2.  Any solutions?  I'm on Windows 7, Outlook 2010.

    HOW FRUSTRATING! NOW WHAT IS HAPPENING? WHEN I GO TO ANY WEBSITE THE PAGE FREEZES. TOP OF PAGE READS, MOZILLA FIREFOX NOT RESPONDING, THINK I"LL GO BACK TO IE, WAY TOO MANY ERRORS AND NO TECH SUPPORT ANSWERS

  • Access to Outlook Anywhere does not work

    Good evening,
    I recently installed an Exchange Server 2013 CAS / MB.
    Until now, the server presented a few errors (mainly in the
    event log) that does not seem to significantly influence functionality.
    This week I published the server on the Internet and verified various malfunctions
    related to the access from outside.
    In particular from outside:
    1 - OWA does not work with Windows integrated authentication, it works with the Forms based authentication;
    2 - Outlook Anywhere does not work from internet.
    I've done a lot of research and testing without success.
    With regard to the first issue (which is not a priority but can relate to second one)
    add that in Firefox I get a first authentication request. If
    I enter credentials it ask again for identical authentication (repeatly), if I cancel it shows a second one that instead allows me access (are slightly different).
    I assume that the first is the integrated Windows application and the second is basic authentication.
    Internet Explorer shows me only the first authentication request and if I cancel shows blank page.
    The problem is
    priority 2:
    Outlook connects without problems on LAN network, the Internet
    seems to download the correct information
    (autodiscover), but then does not connect
    to the server (connection to Microsoft Exchange is unavailable).
    If you manually edit the settings,
    auto-configuration server returns as
    a [email protected]. If I change
    manually the server (and proxy settings
    http), the result does not change.
    - Setting information -
    The server is installed
    in the LAN network and is exposed on the Internet through
    a firewall (Pat on port 443, et al. not 80)
    on a public address.
    The public and private DNS have been configured with a
    host record (A) and two
    CNAME (webmail and autodiscover).
    The internal Outlook clients connect
    with autodiscover and HTTPS /
    NTLM / SSL (Outlook connectivity
    status).
    IMAP, SMTP, POP, ActiveSync function.
    Exchange remote connectivity analizer retrieves Autodiscover information but doesn't pass test for RPC/HTTP access (it discard accesson
    port 443 and try port 80, SPF isn't configured).
    The navigation to the url
    https://proxyexternalURL/rpc/rpcproxy.dll  has the same behaviour like problem 1.
    Test-OutlookConnectivity returns unmanaged error ('WARNING: An unexpected error has occurred and a Watson dump is being generated: Failed to find the probe result for invoke now request id -- and probe workdefinition id --').
    Errors in eventviewer: 5011 - WAS (one time), 139 - MSExchange OWA (some not ripetitive), 3028 - MSExchangeApplicationLogic (every 6 hours), 106 - MSExchange common (many during working hour), 65535 - application (some at nighttime 00.00 - 03.00 a.m.), 1006
    - MSExchangeDiagnostic (every 30 min), 6002 - MSExchange Mid-Tier Storage (about every 5 minutes), 5 - MSExcahnge Workload Management (one time).
    Ask for further information.
    - Cmdlet and Autodiscover output -
    Get-OutlookAnywhere | fl name,*auth*,*ssl*,*host*
    Name                               : Rpc (Default Web site)
    ExternalClientAuthenticationMethod : Basic
    InternalClientAuthenticationMethod : Ntlm
    IISAuthenticationMethods           : {Basic, Ntlm, Negotiate}
    SSLOffloading                      : True
    ExternalClientsRequireSsl          : True
    InternalClientsRequireSsl          : True
    ExternalHostname                   : webmail.name_domain.test
    InternalHostname                   : webmail.name_domain.test
    Get-OutlookProvider | ft -autosize
    Name     Server CertPrincipalName                      TTL
    EXCH            msstd:webmail.name_domain.test         1  
    EXPR             msstd:webmail.name_domain.test         1  
    WEB                                              
         1  
    Get-AutodiscoverVirtualDirectory | fl name,*auth*,*url*
    Name                          : Autodiscover (Default Web site)
    InternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
    ExternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
    LiveIdNegotiateAuthentication : False
    WSSecu.testyAuthentication      : True
    LiveIdBasicAuthentication     : False
    BasicAuthentication           : True
    DigestAuthentication          : False
    WindowsAuthentication         : False
    OAuthAuthentication           : True
    AdfsAuthentication            : False
    InternalUrl                   :
    ExternalUrl                   :
    Get-MapiVirtualDirectory | fl name,*auth*,*url*
    Name                          : mapi (Default Web site)
    IISAuthenticationMethods      : {Basic, Ntlm, Negotiate}
    InternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
    ExternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
    InternalUrl                   : https://webmail.name_domain.test/mapi
    ExternalUrl                   : https://webmail.name_domain.test/mapi
    Autodiscover.xml
    <?xml version="1.0" encoding="utf-8"?>
    <Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
      <Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
        <User>
          <DisplayName>user</DisplayName>
          <LegacyDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=e4c0c18c8f214afbb5152bb08823179d-user</LegacyDN>
          <AutoDiscoverSMTPAddress>user@name_domain.test</AutoDiscoverSMTPAddress>
          <DeploymentId>d60c71c9-3740-404c-a38c-aa24e6105432</DeploymentId>
        </User>
        <Account>
          <AccountType>email</AccountType>
          <Action>settings</Action>
          <MicrosoftOnline>False</MicrosoftOnline>
          <Protocol>
            <Type>EXCH</Type>
            <Server>72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</Server>
            <ServerDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</ServerDN>
            <ServerVersion>73C082C8</ServerVersion>
            <MdbDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test/cn=Microsoft Private MDB</MdbDN>
            <PublicFolderServer>webmail.name_domain.test</PublicFolderServer>
            <AD>DC2.name_domain.test</AD>
            <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>off</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
          </Protocol>
          <Protocol>
            <Type>EXPR</Type>
            <Server>webmail.name_domain.test</Server>
            <SSL>On</SSL>
            <AuthPackage>Basic</AuthPackage>
            <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>on</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
            <EwsPartnerUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsPartnerUrl>
            <GroupingInformation>LAN</GroupingInformation>
          </Protocol>
          <Protocol>
            <Type>WEB</Type>
            <Internal>
              <OWAUrl AuthenticationMethod="Basic, Fba">https://webmail.name_domain.test/</OWAUrl>
              <Protocol>
                <Type>EXCH</Type>
                <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
              </Protocol>
            </Internal>
            <External>
              <OWAUrl AuthenticationMethod="Basic">https://webmail.name_domain.test/</OWAUrl>
              <Protocol>
                <Type>EXPR</Type>
                <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
              </Protocol>
            </External>
          </Protocol>
          <Protocol>
            <Type>EXHTTP</Type>
            <Server>webmail.name_domain.test</Server>
            <SSL>On</SSL>
            <AuthPackage>Ntlm</AuthPackage>
            <ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>On</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
          </Protocol>
          <Protocol>
            <Type>EXHTTP</Type>
            <Server>webmail.name_domain.test</Server>
            <SSL>On</SSL>
            <AuthPackage>Basic</AuthPackage>
            <ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
            <EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
            <EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
            <EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
            <EcpUrl-um>?rfr=olk&amp;p=customize/voicemail.aspx&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-um>
            <EcpUrl-aggr>?rfr=olk&amp;p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-aggr>
            <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&amp;exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;&amp;realm=name_domain.test</EcpUrl-mt>
            <EcpUrl-ret>?rfr=olk&amp;p=organize/retentionpolicytags.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-ret>
            <EcpUrl-sms>?rfr=olk&amp;p=sms/textmessaging.slab&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-sms>
            <EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&amp;exsvurl=1&amp;FldID=&lt;FldID&gt;&amp;realm=name_domain.test</EcpUrl-publish>
            <EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&amp;chgPhoto=1&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-photo>
            <EcpUrl-tm>?rfr=olk&amp;ftr=TeamMailbox&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tm>
            <EcpUrl-tmCreating>?rfr=olk&amp;ftr=TeamMailboxCreating&amp;SPUrl=&lt;SPUrl&gt;&amp;.testle=&lt;.testle&gt;&amp;SPTMAppUrl=&lt;SPTMAppUrl&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmCreating>
            <EcpUrl-tmE.testing>?rfr=olk&amp;ftr=TeamMailboxE.testing&amp;Id=&lt;Id&gt;&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-tmE.testing>
            <EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&amp;exsvurl=1&amp;realm=name_domain.test</EcpUrl-extinstall>
            <OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
            <UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
            <OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
            <ServerExclusiveConnect>On</ServerExclusiveConnect>
            <CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
          </Protocol>
        </Account>
      </Response>
    </Autodiscover>
    Get-OwaVirtualDirectory | fl name,*auth*,*url*
    Name                          : owa (Default Web Site)
    ClientAuthCleanupLevel        : High
    InternalAuthenticationMethods : {Basic, Fba}
    BasicAuthentication           : True
    WindowsAuthentication         : False
    DigestAuthentication          : False
    FormsAuthentication           : True
    LiveIdAuthentication          : False
    AdfsAuthentication            : False
    OAuthAuthentication           : False
    ExternalAuthenticationMethods : {Basic}
    Url                           : {}
    SetPhotoURL                   :
    Exchange2003Url               :
    FailbackUrl                   :
    InternalUrl                   : https://webmail.name_domain.test/
    ExternalUrl                   : https://webmail.name_domain.test/

    Follow the results of the test
    Outlook Anywhere (RPC over HTTP).
    Has been used an account for which
    outlook anywhere works. The account
    for which the outlook anywhere does not work is
    an administrative account and therefore
    can not be used in the test.
    Autodiscovery returns the
    same result for both mailbox.
    I'm testing RPC/HTTP connectivity.
    Testing RPC over HTTP has not been exceeded.
    Test steps
    Microsoft connectivity Analyzer is attempting to test the Autodiscover service for user_test@domain_name.test.
    Test the Autodiscover service has not been exceeded.
    Test steps
    I'm trying to contact the Autodiscover service with each method available.
    I was not able to contact the Autodiscover service with no method.
    Test steps
    I'm trying to test the possible URL for the Autodiscover service https://domain_name.test/AutoDiscover/AutoDiscover.xml
    The test of this potential URL for the Autodiscover service has not been exceeded.
    Test steps
    I'm trying to resolve the host name domain_name. DNS test.
    I was able to resolve the host name.
    IP addresses are returned: xxx.yyy.zzz.www
    I'm testing the TCP port 443 on the host domain_name. tests to check that is open and listening.
    The door has been opened properly.
    I'm testing the validity of your SSL certificate.
    The SSL certificate has not exceeded one or more validation controls.
    Test steps
    Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server domain_name. test on port 443.
    Microsoft connectivity Analyzer got the remote SSL certificate.
    Remote certificate subject: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test issuer: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name,
    L = city, S = state, C = test.
    I am validating the certificate name.
    I could not validate the certificate name.
    More info about this issue and how to resove it
    The host name domain_name. testing does not match any name found on the certificate and server = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test.
    I'm trying to test the possible URL for the Autodiscover service https://autodiscover.domain_name.test/AutoDiscover/AutoDiscover.xml
    The test of this potential URL for the Autodiscover service has not been exceeded.
    Test steps
    I'm trying to resolve the host name autodiscover. domain_name. DNS test.
    I was able to resolve the host name.
    IP addresses are returned: xxx.yyy.zzz.kkk
    I'm testing the TCP port 443 on the host autodiscover. domain_name. tests to check that is open and listening.
    The door has been opened properly.
    I'm testing the validity of your SSL certificate.
    The SSL certificate has not exceeded one or more validation controls.
    Test steps
    Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server autodiscover. domain_name. test on port 443.
    Microsoft connectivity Analyzer got the remote SSL certificate.
    Other details
    Remote certificate subject: CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test issuer: CN = domain_name-DC1-CA, DC = domain_name, DC = test.
    I am validating the certificate name.
    I validated the certificate name.
    Other details
    I found the host name autodiscover. domain_name. test in the voice of the alternative name of the certificate object.
    Elapsed time: 1 ms.
    I am validating the reliability of certificates.
    I was not able to validate the reliability of the certificate.
    Test steps
    Microsoft connectivity Analyzer is attempting to generate certificate chains to a certificate CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test.
    I failed to build a certificate chain for the certificate.
    Other details
    Failed to generate the certificate chain.
    May be missing the required intermediate certificates.
    I'm trying to contact the Autodiscover service using the HTTP redirect method.
    I was not able to contact the Autodiscover service using the HTTP redirect method.
    Test steps
    I'm trying to resolve the host name autodiscover. domain_name. DNS test.
    I was able to resolve the host name.
    IP addresses are returned: xxx.yyy.zzz.kkk
    I'm testing the TCP port 80 on the host autodiscover. domain_name. tests to check that is open and listening.
    The specified port is blocked, is not listening or doesn't produce the expected response.
    More info about this issue and how to resove it
    I encountered a network error while communicating with the remote host.
    I'm trying to
    find the
    SRV DNS record _audiscover._tcp.domain_name.test.
    I failed to find
    the SRV record of the
    Autodiscover service
    in DNS.
    Some clarifications:
    1 - xxx.yyy.zzz.www and xxx.yyy.zzz.kkk
    are two static public addresses
    of which only the latter exposes Exchange services;
    2 - The certificate
    *. Domain_name.test is not related
    to Exchange services;
    3 -I imported the certificate
    of the issuing CA on the standalone test PC to validate the certificate.
    3- The port 80 is not open and are not published SRV records.
    Best regards.

  • Outlook 2010 will not open with icloud installed

    Outlook 2010 and iCloud were working great together on my pc until about a two weeks ago.  Then I could not open outlook 2010.  Established new profile in Outlook without email address and Outlook opened.  Downloaded iCloud and checked the boxes.  When completed tried to open Outlook 2010 and it stopped at processing.  Would not open.  Removed iCloud from pc and Outlook opened.  Is there now a conflict between iCloud and Outlook 2010.  Still works great on my mac, ipad and iphone.  PC, windows 7, office 2010

    Hi tclarke2014,
    Welcome to the Support Communities!  The articles below will help you troubleshoot the issue you are having with iCloud and Outlook.  In the links below, see the sections for Microsoft Windows (Microsoft Outlook):
    iCloud: Troubleshooting iCloud Calendar
    support.apple.com/kb/TS3999
    iCloud: Troubleshooting iCloud Contacts
    support.apple.com/kb/TS3998
    I hope this information helps ....
    - Judy

  • Outlook 2010 does not receive rss messages

    Hi,I have recently uninstalled a freeware VPN.
    After that outlook 2010 does not receive messages (bizarrely firefox works fine, but internet explorer does not)!
    I keep receiving error code: 0x800c0008
    I made sure that it is properly uninstalled.
    Thank you for your help!

    Hi,
    Have you subscribed any RSS Feeds before? Please go to File > Info > Account settings > "RSS Feeds" Tab and check if all the feeds are healthy (connection successful?). Remove them to check
    whether you would still receive the error code anymore.
    More information:  http://office.microsoft.com/en-001/outlook-help/unsubscribe-from-an-rss-feed-HA010024271.aspx
    The following KB could help you solve your issue.
    Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express
    http://support.microsoft.com/kb/813514
    In addition, I would like to suggest you ask this in the Outlook Forums:
    http://social.technet.microsoft.com/Forums/en/outlook/threads
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1.  Win 7 64bit.  2 Other users in our office with iPhone 4 and iPhone 4s aren't having this issue.  They didn't upgrade to 6.0.1.

    Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1.  Win 7 64bit.  2 other users in our office with iPhone 4 and iPhone 4s aren't having this issue.  They didn't upgrade to 6.0.1 though.  Mail that is deleted or read on the iPhone 4 is deleted or marked read in Outlook 2010.  So it's a one-way problem.

    Exchange SBS2003: Email that is deleted in Outlook 2010 is not deleted on iPhone 4, or marked read after upgrading to 6.0.1.  Win 7 64bit.  2 other users in our office with iPhone 4 and iPhone 4s aren't having this issue.  They didn't upgrade to 6.0.1 though.  Mail that is deleted or read on the iPhone 4 is deleted or marked read in Outlook 2010.  So it's a one-way problem.

  • Exporting from PDF to Word 2010 is not working in Acrobat 8

    Exporting from PDF to Word 2010 is not working in Acrobat 8.  I'm getting the following errors/messages.  Any suggestions?
    The instruction at “0x29034c05” referenced memory at “0x0000030”. The memory could not be “written”.
    Click OK to terminate the program 
    Click onCANCEL to debug the program
    Runtime Error!
    Program: C:\Program Files\Adobe\Acrobat 8.0\Acrobat\Acrobat.exe
    R6025
    -pure virtual function call

    Not supported by Acrobat 8. Supported by Acrobat X.
    Be well...

  • HT1296 My Outlook 2010 is not picking up calendar entries from my 4S, and the phone is not picking up calendar entries from Outlook 2010. Help, please!

    My Outlook 2010 is not picking up calendar entries from my 4S, and the phone is not picking up calendar entries from Outlook 2010. Help, please!

    Only the carrier it is locked to can authorize unlocking it. Contact them.

  • Outlook Delay Delivery not work in Outlook 2010

    Outlook Delay delivery is not working even after installing SP1
    Please update me
    10

    Hi King,
    Please make sure you have sat right for the Delay Delivery time.
    After you send the delay deliver email, please don’t open it in your Outbox.
    If you have open the email in your outbox, it will not deliver at the time you have sat.
    Delay or schedule sending email messages
    http://office.microsoft.com/en-us/outlook-help/delay-or-schedule-sending-email-messages-HP010355051.aspx
    Thanks,
    Evan

Maybe you are looking for

  • Regular button not working on iPad or Android.

    Hi, Been reading for forums for a few months on and off and really am stick with this one. I have JS put on a regular button that works fine on a PC or laptop and send the email with the subject of a field completely fine, my issue is when we go of s

  • Ripping Files From a Non Commercial DVD

    Is there an alternative to MPEG Streamclip for doing this? I love the little app but just wondered if there was anything else out there that does an equally or better job? Regards, Kenny.

  • Tabstrip control in Module pool program

    Hi All I am creating a Tab strip control in SE51 ( M - Type program ). In my screen i have 3 tabs . I want the second tab to be default tab in my screen . How to to work on this scenario.   If i get a sample program it will be easy for me.

  • File not found error when Downloading Crystal Reports 2008

    Hi, I am trying to download a trial version of Crystal Reports 2008. I get the error "file not found" both times when I downloaded the zip file and opened it first from the Free trial link and next from the Diamond community page link.  Can anyone he

  • How do you remove the forward arrow?

    Hi, I'm using thunderbird on Mac OS X Mountain Lion. Whenever an email is forwarded, an arrow appears on the original email. How do I remove this? I don't want to remove it for every single email that has been forwarded, just some of them.