Spam Control and a Personal Security protector

I still use my old dinasour, AOL, (don't ask me why), and the Desktop AOL is not compatible with Snow Leopard, so the AOL spam Controls won't work. I can do a workaround by going to the internet and getting into AOL Mail, and do it that way, BUT IT'S A PAIN!!
Does anyone have a favorite, reliable application I can buy or download that would prevent spam from getting into my email?? I am also looking for a personal security application...
Suggestions, please?
Paty

Hi Paty!
I'm still using AOL For Mac OSX Version 10.3.7; available from here AOL Downloads For Mac.
At the bottom of the All-in-One Software column there is a link to legacy software which will start the download immediately.
It has an excellent Spam filter and maybe will still be compatible with Snow Leopard.
ali b

Similar Messages

How to enable 802.11N extended network and WPA2 Personal Security?

Hello,
I have an aiport express 802.11N, using Radio Mode 802.11N (5Ghz only) and set to "allow this network to be extended". At the same time the wireless security is set to "WPA2 Personal" (and the key defined). This router is also hooked up to the internet as the main bridge.
On the other side, I have an airport extreme set exactly the same way from a security standpoint (WPA2 Personal) and for this one, the wireless is set to "extend a wireless network".
Both routers have their light green and my computer is wired to the airport extreme. The computer gets its IP address from the main dhcp server and I can FTP to any ftp site; I can ping any machines on my network;
Now the problem:I can not browse the internet nor ping any website. Http traffic is completely blocked.
If I reset the security to none on both routers, I can then access the internet without any problem.
Has anybody been succesful with this configuration and what am I doing wrong?

You need to download and install the AirPort Extreme 802.11n* Enabler for Mac. But it will cost you --- $1.99. Order it from the Apple Store:
802.11n Enabler
Message was edited by: John Strung

WDS and WPA2 Personal Security

I'm about to set up a WDS with an Airport Extreme, and an Airport Express.
When I set up my WDS with Airport Admin Utility, will my security settings and my 64 character PSK be transfered from the Extreme to the Express? Do I need to apply my security settings first, and then set up the two APs as a WDS?
I've looked for this info in the documentation and have had no luck.
Thanks in advance for any help.

The Extreme is existing, the Express will be here
next week.
Ensure that the Extreme is configured to use WPA2 and that this works okay.
Use the Setup Assistant to configure the Express to extend an existing wireless network.
The Assistant will then configure both the Extreme and the Express for WDS. It will configure the Extreme as the main base station and the Express as nodes.
Will I need to reset the Extreme as well?
No
Or will its
settings be moved onto the Express?
The assistant copies the settings.
Will AirTunes work reasonably well in WDS mode with
WPA2?
Yes.
However do you NEED to extend your network, or are you quite happy to use the Express units for AirTunes only?
For example, say your Extreme is in the basement, you put the Express in the living room, but you need to extend the network into the next floor bedroom then use WDS.
If all you need is AirTunes then don't use WDS.
WDS effectively halves the available bandwidth, which can sometimes mean music dropouts.
Only use WDS if you need to extend your wireless network, otherwise configure the Airport Express units to JOIN your existing wireless network (known as client mode).
iFelix

WRT300N and wpa2 personal security

I believe this is the best security option for me. My router works perfectly, I have a handful of notebooks and desktops connected. I am set up 'mixed' as I have some 'g' and 'n''s on the network and am 'ppoe'. My ip addresses are dynamic and working well. Everytime I try to activate wpa2 security i choose 'aes' and enter a 13 key password and click save changes. I then cannot get signed on to the router - ip address not acquired is the message. I check my ip address, ipconfig/all and sure enough there is no ip address. If you can help I would greatly appreciate it. I checked as best as possible other posts but could not find this issue. Thanks in advance!!
Also, as of now, is there any prodcut out there that successfully extends this routers range?
Cheers,

on the computers where the wireless cards are installed there should be software that you can access to enter the:
security
WPA Algorithms
Shared Key
There could be an icon on your desktop or go to the start menu then all programs
Good Luck,
Ttech

Hi , i have an iphone 4 that is locked and the person i bought it off cannot remember the password security number ?

hi , i have an iphone 4 that is locked and the person i bought it off cannot remember the password security number ?

Unfortunately, you must restore it in iTunes on your computer. There is no way to retrieve a forgotten pass lock code.
You will need to Restore your device from the same computer that you most recently synced to. See - http://support.apple.com/kb/HT1414.

TS2446 My Personal security code was entered incorrectly too many times by my child and now it says I need to connect to itunes to resorer and unlock IPad

My Personal security code was entered incorrectly too many times by my child and now it says I need to connect to itunes to resorer and unlock IPad. Not sure what to do.

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iOS- Forgotten passcode or device disabled after entering wrong passcode
3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
4. iOS- Understanding passcodes
5. What to Do If You've Forgotten Your iPhone's Passcode
6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
7. Restoring iPod touch after forgotten passcode
8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
If this method does not work, then you will need to fully Restore your
device as New

Mavericks Mail; difference in delete folder and trash folder? I don't know which folder to use clearing out old messages, spam, junk and other detrious I might want to recover in the future and which folder for highly sensitive or personal informa

I don't know which folder to use clearing out old messages, spam, junk and other detrious I might want to recover in the future and which folder for highly sensitive or personal in formation I want to keep confidential.

More to my question regarding standard Mail folders, how do Trash and Delete differ in function?

All websites I visit everyday are blocked by a virus that appears to be from Mozilla (but isn't) and wants personal info to unblock the parent control. My viru

I tried to go to websites I visit everyday and they are all blocked by a virus that appears to be from Mozilla (but isn't) and shows mozilla logo and said my website was blocked by Mozilla parent control and you have to sign up for it. It asks for all the personal info that you NEVER give online so I knew it was a virus. I am writing this in safe mode. My Vipre will not pick up this virus and Malware bites won't either. I deleated Mozilla and reinstalled it but it didn't work.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Cisco Phone Control and Presence 8.6.1.1185 with IBM Lotus Notes 8.5.2 (Integrated Sametime Client 8.0.2) - No presence status visible

Hi community,
I am trying to integrate Cisco Unified Presence 8.6.1.10000-34 with IBM Lotus Notes 8.5.2 with the integrated Sametime Client version 8.0.2 via the Cisco Plugins 8.6.1.1185.
Phone control is working fine, whereas the presence status is not shown (= no handset symbol next to the Sametime user). When I look in the preferences of the plugin, I can see that the plugin has connected successfully to the CUCM (8.6.2.20000-2),whereas the connection to the CUPS has not been established.
The user id as well as the password are all the same on all systems. Here is a description of what I have configured via the ciscocfg.exe tool:
Feature Control:
- Enable Phone Status -> checked
- Enable Dial Using Cisco IP Communicator -> unchecked (not required)
- Enable Control Desk Phone -> checked
- Default Mode -> Control Desk Phone
Control Desk Phone Settings:
- Voicemail Pilot Number -> left blank (no voicemail)
- Cisco Unified Communications Manager
     - Servers -> IP address of CUCM
     - Read Only -> unchecked
     - Use as Default CUCM -> checked
     - Synchronize Credentials -> checked
          - Use Sametime Credentials -> checked
Use Secure Connection: -> not required
LDAP Phone Attributes: -> not required
Phone Status Settings:
- Cisco Unified Presence Servers -> IP address of CUPS
- Read Only -> unchecked
- Synchronize Credentials -> checked
     - Use Sametime Credentials -> checked
- Sametime User ID Mapping
     - Use Business Card Attribute -> MailAddress
     - Remove Domain -> checked
- Display Off-Hook Status Only -> unchecked
At the moment I don't see an error in the configuration, but maybe I am wrong. Could anyone please tell me what the error could be?
Thanks a lot in advance!
Kind regards,
Igor

Hi all,
here are some additions to my above post:
Servers and clients used:
1x CUCM 8.6.2.20000-2
1x CUPS 8.6.1.10000-34
1x IBM Lotus Domino Messaging Express Server 8.5.2
1x Sametime Entry Server 8.5.2 (on top of the Domino server)
2x IBM Lotus Notes 8.5.2 with integrated Sametime 8.0.2
2x Cisco Phone Control and Presence with Lotus Sametime (PCAP) 8.6.1.1185
2x Cisco Unified Personal Communicator 8.5.5.19839
Setup:
- CUCM, CUPS and CUPC are working fine, i.e. Desk Phone control via CUPC, as well as availability and presence status are working without issues
- IBM Lotus Domino server is the LDAP Directory, the Sametime Entry Server is installed on top of the Domino server and uses the Domino Directory
- User ID and password on CUCM/CUPS match the ShortName field and password in Domino
- The PCAP plug-in has been manually deployed to both Notes clients with the following configuration:
     - Enable Phone Status -> active
     - Desk Phone Control -> active
     - no credential synchronization for CUCM and CUPS, i.e. every user must fill the user details himself
     - Sametime User ID Mapping is implemented via the LDAP Attribute uid (which is equal to the user id in CUCM)
     - LDAP configuration filled in with details of the Domino server
Phone Control is working fine, also the connection to the LDAP server (Domino) is fine. However, when I type in the credentials for the CUPS server login, I can see (in Troubleshooting pane) that the user (pparker) is connected to the CUPS server for a short period of time and then gets disconnected. After that no connection is possible to the CUPS server, i.e. status is always disconnected.
I have collected the Tomcat (EPASSoap00010.log and security00010.log) logs via RTMT and compared them to the logs from the PCAP plugin. The relevant time period is from 15:14 to 15:17. In the Tomcat logs I can see that the authentication is successful (see attached files), however in the log of PCAP plugin I can see the following messages:
2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.1 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG Credential is rejected. Nothing to retry ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.answerChallenge() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
2012/02/03 15:14:35.281 WARNUNG #### Connection rejected presence server ::class.method=com.cisco.sametime.phonestatus.cup.CUPPresenceWatcher.onPresenceServerConnectionRejected() ::thread=CT_CALLBACK.2 ::loggername=com.cisco.sametime.phonestatus.cup
I don't understand why the connection is rejected although the Sametime Internal ID and CUPS User ID match. Does anyone know what the issue could be?
All posts are very much appreciated!
Thanks a lot in advance!
Kind regards,
Igor

I have been getting messages from Safari when I am on commercial sites where I am sure that I have typed in the address correctly. Messages say that the website was signed by an unknown certifying authority and my personal information may be at risk. Th

Am getting daily messages from Safari warning me that I am on a website with an unknow certifying authority and my personal information may be at risk.
Happens when in Cox webmail and when I am visitying a legitimate site, and I have typed in address correctly such as Citibank rewards site.
Have 3 choices, "Show Certficate" "Cancel" or "Continue". Screen is frozen and cannot exit Safari without acknowledging the message or clicking escape. I had been clicking continue, but after a month or more of many such messages decided to ask Cox. They say it is a virus. Was I careless in clicking continue? What do many messages like this mean? they can't all be unknown certifying authorities can they?

Take each of the following steps that you haven't already tried. Stop when the problem is resolved.
1. Are the current date (including the year) and time shown on your system clock? If not, correct them and test.
2. Check that the following files exist:
/System/Library/Keychains/SystemCACertificates.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
If they don't, restore them from a backup or reinstall OS X after backing up all data.
3. Disable any third-party firewall, "security" software, or network filter. Test.
4. In some versions of OS X, Parental Controls has a bug that prevents loading of secure websites. Turn it off.
5. The process by which OS X checks the validity of root SSL certificates doesn't work behind the authenticating SOCKS proxies used on some enterprise networks. If applicable, contact your network administrator. The proxy server may need to have its settings changed.
6. Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select All Processes from the menu in the toolbar of the Activity Monitor window, if not already selected. Enter "ocspd" (without the quotes) in the "Filter" text field. Is a process with that name listed?
If not, back up all data, then select
Go ▹ Go to Folder
from the Finder menu bar. Into the text box that opens, copy the following line of text:
/var/db/crls
From the folder that opens, move these two files to the Trash:
crlcache.db
ocspcache.db
You’ll be prompted for your administrator password. Reboot, empty the Trash, and test.

HT201272 i just got an iPod 5 and the person that had it before has it link to there apple id and they didn't give it to me and now i can't by pass it i even did a hard factory reset and still nothing how do i get rid of this problem so i can start using

i just got an ipod 5 and the person that had it before has it link to there apple id and didnt give me a password i did a hard reset and nothing happen it still asking me for a password how do i bypass that cause i want to start useing it

Funds cannot be transferred from one Apple ID account to another.
Try here > Rescue email address and how to reset Apple ID security questions
If that doesn't help, contact Apple for assistance with your security questions > Contacting Apple for support and service

How do i reset my mac completely? I have parental controls and cant seem to get to time machine cause i bought the computer with parental controls on it and they did not have the password. How do i completely reset my macbook pro?

how do i reset my mac completely? I have parental controls and cant seem to get to time machine cause i bought the computer with parental controls on it and they did not have the password. How do i completely reset my macbook pro?

If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps on this page will give you a reset link on your account : http://support.apple.com/kb/HT6170
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps on this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5620
Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570

Flash CS4 not working with Windows 7 64bit and Kaspersky Internet Security

I have a new i5 core computer running Windows 7 64bit retail. With Kaspersky Internet Security 2010 installed Flash CS4 becomes so unresponsive that it is completely unusable. Uninstall KIS and it works absolutely fine. I've already read on another forum that someone else is experiencing the same issue with the same combination of products. Is anyone else having this problem amd if so how did you solve it? I've posted on the Kaspersky forum with no solution thus far.
Does Norton work OK with Windows 7(64) and CS4?

*** PROBLEM SOLVED ***
Taxxem you are a star. Ideed turning off 'disable external service control' and disabling 'self defense' under 'settings -options' does indeed bring Flash back to life. Disabling self-defense had the most impact (and causes Kaspersky to grumble somewhat) but disabling external service control also had an impact, albeit much smaller. I'll post this solution against my Kaspersky forum post and hopefully they will do something about it.

Spam Control doesn't seem to work for 520-336-5675 "Mortgage" Spam Text

I made a call to Verizon and they can't seem to stop this number from Tuson either. I got the third round of calls in the last few days to three different Family Lines a few minutes ago. Twenty cents doesn't seem like much, but an extra one or two dollars a month mounts up. The message says that they are responding to a request from me, but I don't have a mortgage to re-do!

Good evening.
Did you add this number under Spam Control or Call and Message Block? If you add the Call and Message Block, you will be able to add up to five 10-digit numbers to the block. This will prevent a number from being able to call or text your phone. Below I have provided you with the steps to add this block, as well as unwanted numbers.
Sign in to "My Verizon" using your [Account Owner] number and do the following:
Select [Safe Guards] tab
Select [Call & Message Blocking] tab
Add/ remove numbers
[Save Changes]
If you need additional assistance, please send me a Private Message with your 10-digit mobile number. I will be happy to help you.
I hope this information is helpful.
Thank you,
VanessaC_vzwsupport
Follow us on Twitter www.twitter.com/vzwsupport

QM Digital Signature SAP System's Personal Security Environments (PSEs)

Hi All,
We want to introduce the Digital Signatures for Quality Management Result Recording and Usage Decision. (Transaction Codes :QE01,QE02,QA11,QA12).
We have made some studies.Still we need some suggessions to achieve the final goal.
==============================================================
1.
SSF settings for system signature
Check and if necessary maintain the standard settings. To do this, execute the following activities in the IMG under SAP Web Application Server -> System Administration -> Digital Signature:
Define application-dependent parameters for SSF functions
Define security settings for the system
The above IMG Structure
SAP Web Application Server -> System Administration -> Digital Signature:
Is not appearing in ECC6.0. Where we can find the above structure in ECC6.0?
2. SAP Netweaver
--> Application Server
--> System Administration
-> Maintain the Public Key information for the system
--> Maintaining the system security information.
This IMG Actvity "Maintaining the System Security information"
Environment.
We have to create new SAP System's Personal Security Environments (PSEs) ?
What is the procedure to create SAP System's Personal Security Environments (PSEs) ?
We are unable to proceed.
Plz. help.
With Best Regards,
Raghu Sharma.

Dear All,
Basis involment is very much required.
Hence we are closing this issue.
With Best Regards,
Raghu Sharma

Spam Control and a Personal Security protector

Similar Messages

Maybe you are looking for