Spam error in xpra_execution phase

hello experts,
         I am applying SAP BASIS PATCH (SAPKB70011) , I got stuck in EPRA_EXECUTION phase.
         It is going on running for more then 10 hours.
         i had restarted the import but still it is showing the same status.
         it is not writing any logs, I checked in SM50 it shows ON HOLD reason RFC, report SAPLSTPA.
         when i checked in SM66 it says CPIC STOPPED.
        I had even tried importing the patch in FOREGROUND, but in status bar it shows "TP BUFFER PREPARED OK " and going on running.
        unable to resolve the issue.
any suggestions
thanks and regards
kavitha

Hi,
Best thing is to raise an oss messasge to SAP,while applying support packages you should not play around.
I think you are applying on a windows system on you would be on oracle 10g or higher version,some of my friend faced the same probelm SAP has suggested to change some memory parameters which i am not very sure.
Regards,
Vamshi.

Similar Messages

SPAM is hangs XPRA_EXECUTION Phase

Hi Gurus,
I have stucked in XPRA_EXECUTION phase. The TP
ended with return code 0008 while implementing the sapkb70012 patch for SAP_BASIS in ECC system.
SPAM is hangs XPRA_EXECUTION Phase.I see in status of Support Package :The import was stopped, since an error occurred.
Error in phase - XPRA_EXECUTION
Reason for error - TP_STEP_FAILURE
Return code - 0008
Error message - OCS package SAPKB70012, tp step R, return code 0008.
Could please Advise the Solution for the issue.
Appretiate you help.
Thanks
Anils

Hi
See below is the log for error code 0008 in SAPRB70012.
3 EPU182 Post-processing for &2"ACGR" &3"SAP_XI_BPE_ADMINISTRATOR_ABAP" was already performed successfully earlier&1"R3TR"
3 EPU182 Post-processing for &2"ACGR" &3"SAP_XI_BPE_CONFIGURATOR_ABAP" was already performed successfully earlier&1"R3TR"
3 EPU182 Post-processing for &2"ACGR" &3"SAP_XI_BPE_MONITOR_ABAP" was already performed successfully earlier&1"R3TR"
3 EPU182 Post-processing for &2"ACGR" &3"SAP_XI_BPE_SERV_USER" was already performed successfully earlier&1"R3TR"
3 EPU182 Post-processing for &2"ACGR" &3"SAP_XI_BPE_SERV_USER_MAIN" was already performed successfully earlier&1"R3TR"
3 EPU123 Post-import method "PRGN_AFTER_IMP_ACTGROUP_ACGR" completed for "ACGR" "L", date and time: "20080206084243"
2 EPU122XPost-import method "RH_ACTIVATE_PDOBJECT_AFTER_IMP" started for "PDST_BASE" "T", date and time: "20080206084243"
3 EPU182 Post-processing for &2"TDAT" &3"PDST_BASE" was already performed successfully earlier&1"R3TR"
3 EPU123 Post-import method "RH_ACTIVATE_PDOBJECT_AFTER_IMP" completed for "PDST_BASE" "T", date and time: "20080206084243"
2 EPU122XPost-import method "SRT_REG_AFTER_IMPORT" started for "SRTD" "L", date and time: "20080206084243"
3 EPU182 Post-processing for &2"SRTD" &3"8A0A000A416FA34EBD449DF66C50649B" was already performed successfully earlier&1"R3TR"
3 EPU123 Post-import method "SRT_REG_AFTER_IMPORT" completed for "SRTD" "L", date and time: "20080206084243"
2 EPU122XPost-import method "SUSR_AFTER_IMP_PROFILE" started for "SUSPR" "T", date and time: "20080206084244"
3 EPU182 Post-processing for &2"TDAT" &3"SUSPR" was already performed successfully earlier&1"R3TR"
3 EPU123 Post-import method "SUSR_AFTER_IMP_PROFILE" completed for "SUSPR" "T", date and time: "20080206084244"
2 EPU127 Post-import methods of change/transport request "SAPKB70012" completed
2 EPU128      Start of subsequent processing ... "20080206084214"
2 EPU129      End of subsequent processing... "20080206084244"
2 EPU110XExecute reports for change/transport request: "SAPKB70012"
4 EPU111    on the application server: "DRIECCDEV"
3 ETP000
3 ETP000 **************************************************
3 ETP000
2 EPU117 Reports for change/transport request "SAPKB70012" have been executed
2 EPU118      Start of................ "20080206084244"
2 EPU119      End of.................. "20080206084244"
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP110 end date and time   : "20080206084244"
1 ETP111 exit code           : "8"
1 ETP199 ######################################
Regards
Anilsai

Error in XPRA_EXECUTION phase in instalation BI_CONT 3.53

Hello,
After installing SAP Netweaver 04 as ABAP i am Installing Add-on
BI_CONT Rel.353 : Import of the queue -
via SAINT Tcode.
Now it is in error in XPRA_EXECUTION Phase of pkg
SAPKIBIFQ4 BI_CONT 353: patch 0014.
Error is in Method Execution step:
InfoObject 0GRC_CSEOWR, version D being deleted, (basic char. not
found)
Start of the after-import method for object type R3TR DTMP ( )
Errors occurred during post-handling RS_AFTER_IMPORT_D for DUPD L
RS_AFTER_IMPORT_D belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT_D completed for DUPD L, date and
time: 20080103122305
Pls help me ASAP to resolve this error.
Regards,
Ankita

Hi,
I solved this problem after implementing
Note 1083886 - Method IF_FDT_EXPRESSION~IS_GENERATING is not implemented.
is thsi dosent work try restarting the queue again.
Kind regards,
Vamsi

Error in XPRA_EXECUTION phase while upgrading patch in solman 7.0.

Hi all,
I was upgrading solman system( 7.0 ) from patch level 10 to patch level 13 , while upgrading it throwed error in XPRA_EXECUTION phase. Error is in SAPK-40003INCPRXRPM and SAPK-40004INCPRXRPM.
Error log is as given below :
Post-import method SWO_OBJTYPE_AFTER_IMPORT started for SOBJ L, date and time: 20090415070141
Object type 'BUS2178' generated successfully
Object type 'BUS2177' generated successfully
Object type 'BUS2176' generated successfully
Object type 'BUS2175' could not be generated
The type 'DPR_SCHEDULING' is unknown.
Object type 'BUS2174' could not be generated
The type 'DPR_SCHEDULING' is unknown.
Object type 'BUS2173' could not be generated
The type 'DPR_SCHEDULING' is unknown.
Object type 'BUS2172' could not be generated
Please help me out as i am stuck.

HI,
Did u check is there any dependencies of Solman support packages with other support pakckages.
Object type 'BUS2174' could not be generated it seems there is a issues with dependencies only.
Please check the stack guide once then u will come to know all the dependencies.
-Srini

Error in XPRA_EXECUTION PHASE on SAINT transacction installing BPC 7.5

Hi
I am installing Bussines Planning & Consolidation 7.5 on an Netweaver 7.01 with EHP1 (enhacement package 1) system but when I used SAINT transacction to install the ADDON for this ABAP component . First I received a message about some "conficts" between some ADDOns so I had to applied an CRT (confict resolution transport) support package to resolve the issue
But the saint transacction stopped on the XPRA_EXECUTION phase and the log message talk about some "BC-SRV-NUM" (number Range Managment) in some table values conteined invalid key number range object values
I found the 1467470 note to fix the issue , I tried to use SNOTE to implemented it but can not be implemented.
Can someone help give me some advices to this issue?
Thanks a lot for your time
Regards

Hi Salman
I understand your issue because the installation guide is not enough clear.
Look
1) Once you installed the ADD-ON CPMBPC on ABAP and follow the installation guide
You have to create on ABAP tier 3 communications data users (user,admin, sysadmin) like guide says and at the end of it , you have to run UJA3_WRITE_SYS_USERS program on se38 and write:
domain windows or local group windows\bpc_user --> for example GGBIDBPC\bpc_user
domain windows or local group windows\ bpc_admin --> GGBIDBPC\bpc_admin
domain windows or local group windows\bpc_sysadmin --> GGBIDBPC\bpc_sysadmin
you should use Domain windows to ensure security environment about users like password or expiration rules
2) On .NET tier when your are installing the BPC Server you have to entry at first time just one user (sysadmin) using the same format:
Domain or local group windows\bpc_sysadmin --> GGBIDBPC\bpc_sysadmin
later you will prompt on next screens enter the System Administrator, Administrator, and User (user IDs), together with their passwords that were created on step 1.
The reality is just sysadmin user is used to BPC configuration on ABAP and .NET tiers
I hope this information be useful
Regards
Luis Antonio Aguirre

SPAM error in PREPARE

Experts,
I am getting SPAM error in SPAM_CHK_INI phase..The message came to update the SPAM level to latest.I did for the latest one for SPAM in 4.7 620 version..but after running PREPARE phase throwing error...I am attaching the log..Please help..I have a fixed timeline and have to complete the upograde within 1 day..I will rewrad for your kind effort..Current SPAM is 6.20/0036..
>> 16:30:30 PREPARE: START OF PHASE SPAM_CHK_INI
ERROR: Calling function module 'spda_get_spam_version'
failed. Error code 3.
? continue
? cancel
Waiting for input since Jan 14, 2009 4:30:30 PM
SEVERE ERROR(S) OCCURRED IN SPAM_CHK_INI !!!
? exit
? retry
Regards,
Chinmaya..

Hi,
SPAM latest version available in SWDC in 32 only.
Just apply the SPAM patch and restart the PREPARE phase, it should get succeeded, I have done it many times.
Regards
KT

Support Pack upgrade error in Import Phase

Hello,
Currently I am upgrading SCM system with Support pack level 12 to 20 . When i am applying Basis 12 to 20. I got an error in Import_Proper phase.
Could you please help me on this? I tried and still searching solution for this..But no luck...
Os is : AIX and
Log File:                /usr/sap/trans/log/SAPIB70013.xxx
Main import
Transport request   : SAPKB70013
System              : xxxx
tp path             : tp
Version and release: 372.04.71 700
child process 934006 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_report_interface
fcode:      CLOSE_LINE_MODE
tabname:    SOURCE
len (char): 40
key:        CL_OBJECT_COLLECTION==========CT
retcode:    1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1212554 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_report_interface
fcode:      CLOSE_LINE_MODE
tabname:    SOURCE
len (char): 40
key:        CL_WDR_APPLICATION_WINDOW=====CT
retcode:    1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1171520 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_report_interface
fcode:      CLOSE_LINE_MODE
tabname:    SOURCE
len (char): 40
key:        CL_WDY_MD_EVENT_SOURCE========CI
retcode:    1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1331412 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_xrtab
fcode:      RT_MI_LOAD
tabname:    ECSCR_DATA
len (char): 106
key:        EC_TEST_DATA                  00000000P10                           IECATTDEFAULT
retcode:    1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
insert / update sequence failed due to an error in DBI.
maybe there's a concurrent process which inserted this table entry at the same time.
insert / update sequence failed due to an error in DBI.
maybe there's a concurrent process which inserted this table entry at the same time.
child process 1310922 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_xrtab
fcode:      RT_MI_END
tabname:    WDY_APP_PROPERTY
len (char): 64
key:        DEMO_UIEL_DROPDOWN_BY_IDX     DEMO_VIEW
retcode:    1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
import portion 018446 - 999999 not imported because the child processes died for unknown reason
child process 1310924 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_report_interface
fcode:      CLOSE_LINE_MODE
tabname:    SOURCE
len (char): 40
key:        CL_WDY_MD_OUTGOING_EVENT======CT
retcode:    1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1286192 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function:   db_xrtab
fcode:      RT_MI_LOAD
tabname:    ECSCR_DATA
len (char): 106
key:        EC_TEST_DATA                  00000000P10                           IECATTDEFAULT
retcode:    1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
import portion 009158 - 018411 not imported because the child processes died for unknown reason
import portion 018412 - 018527 not imported because the child processes died for unknown reason
import portion 018528 - 999999 not imported because the child processes died for unknown reason
sap_dext called with msgnr 1:
db call info -
function:   db_xrtab
fcode:      RT_MI_LOAD
tabname:    ECSCR_DATA
len (char): 106
key:        EC_TEST_DATA                  00000000P10                           IECATTDEFAULT
retcode:    1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
Main import
End date and time : 20100909034914
Ended with return code: ===> 12 <===
     |   ######################################
Thanks and Regards,
Sankar
SAP BASIS Consultant

Hi,
Thanks for you reply. I restarted import but no luck still. I activated some object also not working. when i call SPAM it is not going to the SPAM pager. Showing dump...
Runtime Errors         CALL_FUNCTION_NOT_FOUND
Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          10.09.2010 09:41:37
Short text
     Function module "POSS_UIREQ_OPT_SUBMIT" not found.
What happened?
     The function module "POSS_UIREQ_OPT_SUBMIT" is called,
     but cannot be found in the library.
     Error in the ABAP Application Program
     The current ABAP program "SAPLSTXC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
      not caught in
     procedure "OPEN_FORM" "(FUNCTION)", nor was it propagated by a RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     The program "SAPLSTXC" contains the CALL FUNCTION statement.
     The name of the function module to be called is "POSS_UIREQ_OPT_SUBMIT".
     No function module exists with the name "POSS_UIREQ_OPT_SUBMIT".
     All function modules are listed in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Pay particular attenti
    upper/lower case and underscores ("_").
    or
b) Transport error
c) In the case of an enqueue/dequeue module,
    the lock object may not have been activated
    (ABAP/4 Dictionary).
When i tried to check function module it is not there..
Could you please help on this?
Regards,
Sankar Basis Consultant

Spam is hanging in phase IMPORT_PROPER

Hi!
I am facing with hanging SPAM error in phase IMPORT_PROPER (patch of SAPKB70013 - SAPKB70016).
The SPAM patch terminates after a few sec. in DDIC activation action.
I have looked into log file and founded folllowing:
The job RDDEXECL terminated with error.
The reason seems to be sysntax error in program "CL_PROXY_SERVICE=======CP".
Futhermore I could detect that table SI_WD_FIRST_MAIN_SCREEN cannot be activated.
Can some one help me to solve this problem?
Of great interest was the following:
rescedule possibilities of job RDDEEXECL in order to contibue patch
start of SPAM or tp-commando by ignoring this error
Thank you very much!
Thom

Moved to NW Admin...

Error in preprocessing phase

Hi All ,
We are facing error in preprocessing phase of upgrade to EHP 7 ,Let me know if anyone can help us in this critical situation
System details:Oracle 11gr2,Linux x86-64 ,
Below is the error :
During the phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/RFCDEST_CREATE_S2OX in
Pre-processing of the SUM we are facing below error.
1 ETQ233 Calling function module "FUNCTION_EXISTS" by RFC
2 ETQ373 parameter "FUNCNAME" = "RFC_DESTINATION_CREATE"
1 ETQ234 Call of function module "FUNCTION_EXISTS" by RFC succeeded
4 ETQ010 Date & Time: 20140912043336
1 ETQ359 RFC Login to: System="XXX", AsHost="sapXXXpas" Nr="12",
GwHost="sapa10pas", GwService="sapgwZZ"
2 ETQ232 RFC Login succeeded
4 ETQ010 Date & Time: 20140912043336
1 ETQ233 Calling function module "RFC_DESTINATION_CREATE" by RFC
2 ETQ373 parameter "DESTINATION_NAME" = "SAP_UPGRADE_ORIG_SYSTEM"
2 ETQ373 parameter "USER" = "DDIC"
2 ETQ373 parameter "HOST" = "sapXXXpas"
2 ETQ373 parameter "SYSTEMNR" = "11"
2 ETQ373 parameter "CHECK" = "X"
1EETQ235 Call of function module "RFC_DESTINATION_CREATE" by RFC failed
(error-status "3")
2EETQ360 RFC of "RFC_DESTINATION_CREATE" failed:
2EETQ361 code/exception : 3
2EETQ362 key : CALL_FUNCTION_NO_DEST
2EETQ399 RFC destination SAP_UPGRADE_ORIG_SYSTEM does not exist.
Regards
Bharat
Mob No: 91 9008804153

Hi Reagan ,
The issue was taken to SAP development security team :::Below is the weird issue ::
Firstly ,for the authorizations to work correctly, all authorization tables must be in a consistent state as below :
ust04, ust10c, ust10s, ust12, usrbf2, usrbf3.
If we want to maintain authorizations, also usr04, usr10, usr12 are required.
But here , a mismatch of tables usrbf2 and usrbf3 in 2 instances are the reason for the stuck in the upgrade :::
SQL> select count(*) from sapsr3.USRBF2 where MANDT = '000' and BNAME =
'DDIC';
COUNT(*)
2997
SQL> select count(*) from sapsr3.USRBF3 where MANDT = '000' and BNAME =
'DDIC';
COUNT(*)
1
SQL>
SQL> select count(*) from sapsr3shd.USRBF2 where MANDT = '000' and
BNAME =
'DDIC';
COUNT(*)
673
SQL> select count(*) from sapsr3shd.USRBF3 where MANDT = '000' and
BNAME =
'DDIC';
COUNT(*)
1
This issue was resolved by SAP and then upgrade went fine ,This is not an issue with password of DDIC !!!!!
Regards
Ram

Error during upgrade phase JOB_RSUPGCUA_SHD

Hi Everyone,
We are in the process of completing a combined ERP 6.0 Upgrade / Unicode Conversion. Our starting release is ECC 5.0 (ABAP only) and we are running Oracle 10.2.0.2 on AIX 5.3.
We are receiving the following error in phase JOB_RSUPGCUA_SHD:
1 ETQ201XEntering upgrade-phase "JOB_RSUPGCUA_SHD" ("20080812163717")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '56', GwService = 'sapgw56'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=1
4 ETQ260 Starting batchjob "RSUPGCUAGEN111"
4 ETQ010 Date & Time: 20080812163717
4 ETQ260 Starting batchjob "RSUPGCUAGEN111"
4 ETQ230 Starting RFC Login to: System = "ENP", GwHost = "aix12j1", GwService = "sapgw56"
4 ETQ359 RFC Login to: System="ENP", Nr="56", GwHost="aix12j1", GwService="sapgw56"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
2EETQ235 Call of function module "SUBST_START_BATCHJOB" by RFC failed (error-status "10")
2EETQ261 Start of batchjob "RSUPGCUAGEN111" failed
1EETQ203 Upgrade phase "JOB_RSUPGCUA_SHD" aborted with errors ("20080812163717")
We originally had some issues with the shadow system not starting in phase START_SHDI_FIRST. The source of the problem was the value of paramter ipc/shm_psize_40 in the instance profile of the shadow system. When we ran "sappfpar check" on the profile, the output indicated that the paramter was too small. We backed up the profile, increased the parameter to the value "sappfpar check" recommended and then stopped the shadow system via "SAPup stopshd." We then repeated the phase. The shadow instance was started successfully and the upgrade proceeded with subsequent phases.
We encountered the error above several phases later. The shadow instance is started and I am able to login with user DDIC. As detailed in the error message above, function module SUBST_START_BATCHJOB is aborting with error code 10. Based on what I can interpret from source code of the function module, this seems to indicate that there is a problem with the program values. The SM21 log indicates that "Program name RSUPGCUAGEN111 is invalid."
What do we need to do to get past this error?
Thanks in advance for any assistance,
Tommye

for our case it was that the shadow instance was not completely stsarted, some processes were down, cause the ipc pool 40 was too small, i found the error in the killed work processes.
Probleme resolved as susch. i hope it will help someone.
Regards

PI 7.1 upgrade error in GETSYNC_PROFILES_CHANGED phase

Hello
Currently I am upgrading an XI 7.0 system to PI 7.1. The downtime phases have just started and I've hit an error in the phase 'GETSYNC_PROFILES_CHANGED'; the error is 'Not enough space for string replacement'. Based on the phase name, and the previous phases, it looks as if the error is something to do with the profiles. The relevant upgrade logs have no useful info in them except for the string space message.
I have done the usual SDN, SAP Marketplace and Google searches but could not find an answer to my problem. I have also opened a high priority call with SAP but they have not come up with an answer yet. Does anybody have any useful advice?
The system being upgraded is running on Windows 2003 Server R2 64bit, has an Oracle 10.2.0.4 DB, and the source system was XI/PI 7.0 SP15.
Thanks.

Hello Rohit
Freespace is more than sufficient:
C:\ = 5.2GB (O/S)
D:\ = 18.9GB (Oracle & SAP)
E:\ = 8.53GB (Oracle)
Andrew
Edited by: Andrew Turvey on May 28, 2009 3:48 PM

Error in ABAP_Import Phase

Dear Guru's,
We are facing some issue on ABAP Import phase, out of 29 Import Monior jobs 2 jobs gets failed.
Error in Import_ABAP Phase, 2 jobs failed
Loading of 'DD03L' import package: ERROR
Loading of 'SACONT01' import package: ERROR
could anyone suggest me, what could be done to resolve this issue.
regards,
Guna

Hi,
Thanks for your information.
We tried with retry option, still in same position.
We're doing solution manager 7.0 installation on AIX 5.
(DB) INFO: SACONT01 deleted/truncated #20100429153529
(DB6) Using LOAD API for table SACONT01
(RFF) ERROR: invalid checksum in data file "/hm/cdmedia/solman7.0/51033518_Expor
t2/EXP3/DATA/SACONT01.001"
current table was "SACONT01"
(DB) INFO: disconnected from DB
/usr/sap/SM1/SYS/exe/run/R3load: job finished with 1 error(s)
/usr/sap/SM1/SYS/exe/run/R3load: END OF LOG: 20100429153530
Suggestions appreciated.
regards,
Guna

Error in ACTIVATE_CURRENT_USAGES phase of portal upgrade (NW04 to NW04s)

hello gurus,
i am upgrading Netweaver 04 to netweaver 04s (Enterprise Portal)
oracle upgrade from 9.2.0.7 to 10.2.0.1 successfully
but i am getting error in 78 phase out 100 in java upgrade program management
ACTIVATE_CURRENT_USAGES
i am unable to track the cause.......
log file is shown below
kindly help......
its urgent
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[D:\usr\sap\jupgrade\log\ACTIVATE_CURRENT_USAGES_ACU_07.LOG]/>
<!PATTERN[ACTIVATE_CURRENT_USAGES_ACU_07.LOG]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[Cp1252]/>
<!LOGHEADER[END]/>
#1.5#C000AC1908C2000000000029014A8CD1000432D6B5DD7008#1181797662421#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:713)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:713)#Java###Phase has been started.#1#UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES#
#1.5#C000AC1908C200000000002A014A8CD1000432D6B5DDAE88#1181797662437#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:714)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.initialize(AbstractPhaseType.java:714)#Java###Phase type is .#1#com.sap.sdt.ucp.phases.PhaseTypeExecuteTask#
#1.5#C000AC1908C200000000002B014A8CD1000432D6B5DDAE88#1181797662437#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:338)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:338)#Java### Parameter =#2#inputFile#ExecuteTasks.xml#
#1.5#C000AC1908C200000000002C014A8CD1000432D6B5DDAE88#1181797662437#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:338)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.logParameters(AbstractPhaseType.java:338)#Java### Parameter =#2#taskName#ACTIVATE_CURRENT_USAGES#
#1.5#C000AC1908C200000000002D014A8CD1000432D6B5DDAE88#1181797662437#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.PhaseTypeExecuteTask.checkParameters(PhaseTypeExecuteTask.java:191)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.PhaseTypeExecuteTask.checkParameters(PhaseTypeExecuteTask.java:191)#Java###Phase parameters have been checked. All required phase parameters have been set.#1#2#
#1.5#C000AC1908C200000000002E014A8CD1000432D6B5F009C0#1181797663640#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.cfg.ConfigurationBuilder.buildConfiguration(ConfigurationBuilder.java:297)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.cfg.ConfigurationBuilder.buildConfiguration(ConfigurationBuilder.java:297)#Java###Configuration has been built from input file .#1#D:/usr/sap/jupgrade/config/ExecuteTasks.xml#
#1.5#C000AC1908C200000000002F014A8CD1000432D6B5F13A70#1181797663718#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.cfg.ConfigurationBuilder.buildConfiguration(ConfigurationBuilder.java:297)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.cfg.ConfigurationBuilder.buildConfiguration(ConfigurationBuilder.java:297)#Java###Configuration has been built from input file .#1#D:/usr/sap/jupgrade/config/ExecuteTasks_WIN.xml#
#1.5#C000AC1908C2000000000030014A8CD1000432D6B5F13A70#1181797663718#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.cfg.ConfigurationBuilder.buildGlobalConfiguration(ConfigurationBuilder.java:251)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.cfg.ConfigurationBuilder.buildGlobalConfiguration(ConfigurationBuilder.java:251)#Java###Global configuration has been built from input file .#1#D:/usr/sap/jupgrade/config/ExecuteTasks.xml#
#1.5#C000AC1908C2000000000031014A8CD1000432D6B5F13A70#1181797663718#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:41)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:41)#Java###Java process ID , name has been started.#2#2#com.sap.engine.offline.OfflineToolStart#
#1.5#C000AC1908C2000000000032014A8CD1000432D6B5F178F0#1181797663734#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:54)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:54)#Java###Command line: #2# #C:
j2sdk1.4.2_09
jre
bin
java.exe -cp d:/usr/sap/W60/SYS/global/sltools/sharedlib/launcher.jar;d:/usr/sap/W60/SYS/global/sltools/sharedlib; com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain d:/usr/sap/W60/SYS/global/sltools/sharedlib;D:/usr/sap/W60/SYS/global/security/lib/tools;D:/usr/sap/w60/jc00/exe/classes12.jar -activated -sid=W60 -dsn=jdbc/pool/W60 -ssprops=D:/usr/sap/W60/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/W60/SYS/global/security/data/SecStore.key -log=D:
usr
sap
jupgrade
log/ACTIVATE_USAGE_AS.LOG -prod_name=NetWeaver -usage_name=AS -usage_vendor=sap.com -action=true#
#1.5#C000AC1908C2000000000033014A8CD1000432D6B5F178F0#1181797663734#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:55)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:55)#Java###Standard out: #2# #D:
usr
sap
jupgrade
log
ACTIVATE_USAGE_AS_ACU_01.OUT#
#1.5#C000AC1908C2000000000034014A8CD1000432D6B5F178F0#1181797663734#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:120)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:120)#Java###Process ID has been started.#1#2#
#1.5#C000AC1908C2000000000035014A8CD1000432D6B5F1B770#1181797663750#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:176)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:176)#Java###Waiting for process ID , name to finish.#2#2#java.exe#
#1.5#C000AC1908C2000000000036014A8CD1000432D6B6B9BE78#1181797676859#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:209)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:209)#Java###Process ID , name has been finished, exit code .#3#2#java.exe#64#
#1.5#C000AC1908C2000000000037014A8CD1000432D6B6B9BE78#1181797676859#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:735)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:735)#Java###Exception has occurred during the execution of the phase.##
#1.5#C000AC1908C2000000000038014A8CD1000432D6B6B9FCF8#1181797676875#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.execute.AbstractExtProcessOperation.generateResultProcessingException(AbstractExtProcessOperation.java:579)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.tools.execute.AbstractExtProcessOperation.generateResultProcessingException(AbstractExtProcessOperation.java:579)#Java###Could not activate usage AS. Could not execute 'C:
j2sdk1.4.2_09
jre
bin
java.exe -cp d:/usr/sap/W60/SYS/global/sltools/sharedlib/launcher.jar;d:/usr/sap/W60/SYS/global/sltools/sharedlib; com.sap.engine.offline.OfflineToolStart com.sap.sl.ut.manager.UtlMain d:/usr/sap/W60/SYS/global/sltools/sharedlib;D:/usr/sap/W60/SYS/global/security/lib/tools;D:/usr/sap/w60/jc00/exe/classes12.jar -activated -sid=W60 -dsn=jdbc/pool/W60 -ssprops=D:/usr/sap/W60/SYS/global/security/data/SecStore.properties -ssk=D:/usr/sap/W60/SYS/global/security/data/SecStore.key -log=D:
usr
sap
jupgrade
log/ACTIVATE_USAGE_AS.LOG -prod_name=NetWeaver -usage_name=AS -usage_vendor=sap.com -action=true', return code '64'. You can check the file(s) 'D:
usr
sap
jupgrade
log/ACTIVATE_USAGE_AS_ACU.OUT', 'D:
usr
sap
jupgrade
log/ACTIVATE_USAGE_AS_ACU.ERR' to which the output of the process has been redirected.##
#1.5#C000AC1908C2000000000039014A8CD1000432D6B6B9FCF8#1181797676875#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.tools.execute.AbstractExtProcessOperation.execute(AbstractExtProcessOperation.java:176)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.tools.execute.AbstractExtProcessOperation.execute(AbstractExtProcessOperation.java:176)#Java###Error while processing the result.##
#1.5#C000AC1908C200000000003A014A8CD1000432D6B6BA3790#1181797676890#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.PhaseTypeExecuteTask.execute(PhaseTypeExecuteTask.java:173)#######Thread[main,5,main]##0#0#Error#1#com.sap.sdt.ucp.phases.PhaseTypeExecuteTask.execute(PhaseTypeExecuteTask.java:173)#Java###Error while executing PhaseTypeExecuteTask with input file ExecuteTasks.xml and task ACTIVATE_CURRENT_USAGES.##
#1.5#C000AC1908C200000000003B014A8CD1000432D6B6BA3790#1181797676890#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:779)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:779)#Java###Phase has been completed.#1#UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES#
#1.5#C000AC1908C200000000003C014A8CD1000432D6B6BA3790#1181797676890#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:780)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:780)#Java###Start time: .#1#2007/06/14 10:37:42#
#1.5#C000AC1908C200000000003D014A8CD1000432D6B6BA3790#1181797676890#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:781)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:781)#Java###End time: .#1#2007/06/14 10:37:56#
#1.5#C000AC1908C200000000003E014A8CD1000432D6B6BA3790#1181797676890#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:782)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:782)#Java###Duration: .#1#0:00:14.453#
#1.5#C000AC1908C200000000003F014A8CD1000432D6B6BA3790#1181797676890#/System/Server/Upgrade/Phases/UPGRADE/UPGRADE/ACTIVATE_CURRENT_USAGES##com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:783)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:783)#Java###Phase status is .#1#error#
waiting for solution
thankx in advance....
shoeb

Could you please share us the solution?

Error in DEPLOY_ONLINE_DEPL phase EHPI 7.01 SPS05 DualStack ABAP+JAVA

Hello experts,
I'm getting an error in DEPLOY_ONLINE_DEPL phase (Downtime Roadmap) under J2EE tab in enhancement package installation in our BW System (Netweaver 7.0 SP 17 to NW 7.01 SPS 05 DualStack ABAP+JAVA)
The system is running on High Availability server.
Restarting Q2B 00 instance failed.
Cannot find instance with instance number 0 on host mcho35au in the cluster.
I'm not sure, but maybe anything is wrong with my profiles...? I don't know....
All J2EE deployments has been successfully finished (JSPM).
I have restarted all instances DVEBMGS00 & SCS01 and Shadow Instance DVEBMGS02. SCS01 Instance is up and running as well.
Then I have stop EHPI Upgrade and start it again.
DEPLOY_ONLINE_DEPL_DDB_18.LOG:
==========================================
RequestController.java:178)[Thread[main,5,main]]: Deployment of queue sapjup-queue completedwith error Cannot check the state(running/stoped) of the CI.
Restarting Q2B 00 Instance failed
Connot find instance with instance number 0 on host mcho35au in the cluster
==========================================
An error has occurred during the execution of the DEPLOY_ONLINE_DEPL phase.
Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action. Could not execute deployment of stack file /usr/sap/trans/EPS/in/SMSDXML_CROSSSYS_20091109075202.238.xml. The deployment of the queue failed. Deployment of queue sapjup-queue completed with error Cannot check the state(running/stoped) of the CI. Restarting Q2B 00 instance failed. Cannot find instance with instance number 0 on host mcho35au in the cluster. JSPM version is 7.01.5.0.20. Current JSPM log directory is /usr/sap/Q2B/DVEBMGS00/j2ee/JSPM/log/log_2009_11_14_18_20_03.
You can find more information in the log file /usr/sap/swdc/EHPI/java/log/DEPLOY_ONLINE_DEPL_DDB_19.LOG.
==========================================
Any ideas ?
Please help me in this case.
I'm wating for any feedbacks.
Thanks a lot in advance !
Gerd
Edited by: Gerd Schuster on Nov 14, 2009 6:23 PM

Problem:
The DEPLOY_ONLINE_DEPL phase (Downtime Roadmap) under J2EE tab in enhancement package installation in BW System (Netweaver 7.0 SP 17 to NW 7.01 SPS 05 DualStack ABAP+JAVA, system is running on High Availability server) stopped with error:
RequestController.java:178)[Threadmain,5,main]: Deployment of queue sapjup-queue
completedwith error Cannot check the state(running/stoped) of the CI.
Restarting Q2B 00 Instance failed
Connot find instance with instance number 0 on host mcho35au in the cluster
An error has occurred during the execution of the DEPLOY_ONLINE_DEPL phase.
Error while executing DeploymentManager phase with action deploySlot. Check the log files for
the specified action. Could not execute deployment of stack
file /usr/sap/trans/EPS/in/SMSDXML_CROSSSYS_20091109075202.238.xml. The deployment
of the queue failed. Deployment of queue sapjup-queue completed with error Cannot check the
state(running/stoped) of the CI. Restarting Q2B 00 instance failed. Cannot find instance with instance
number 0 on host mcho35au in the cluster. JSPM version is 7.01.5.0.20. Current JSPM log directory
is /usr/sap/Q2B/DVEBMGS00/j2ee/JSPM/log/log_2009_11_14_18_20_03.
You can find more information in the log file /usr/sap/swdc/EHPI/java/log/DEPLOY_ONLINE_DEPL_DDB_19.LOG.
Solution:
stop all instances (shadow instance, SCSxx)
In a High Availability server you have to modify few parameters in DEFAULT profile temporarily (replace alias-servername with real hostname):
DEFAULT.PFL: SAPLOCALHOST = mcho35au
DEFAULT.PFL: SAPDBHOST = mcho35au
DEFAULT.PFL: rdisp/mshost = mcho35au
# DEFAULT.PFL: rdisp/vbname = mcho35au_Q2B_00 (<- maby it'snot relevant)
# DEFAULT.PFL: rdisp/enqname = mcho35au_Q2B_00 (<- maby it'snot relevant)
# DEFAULT.PFL: rdisp/btcname = mcho35au_Q2B_00 (<- maby it'snot relevant)
DEFAULT.PFL: rdisp/sna_gateway = mcho35au
in instance DVEBMGS00 switch profile icman = 0 to 1 (otherwise J2EE instance will not started)
startsap DVEBMGS00
Restart EHPI Upgrade (EHPI keep the old DEFAULT.PFL settings in shared memory!)
./EHPI/STARTUP jce_policy_zip=90000125.zip
Repeat phase DEPLOY_ONLINE_DEPL
Gerd
Edited by: Gerd Schuster on Nov 16, 2009 2:59 PM

Error in TP_ACTION_CP2STRIG phase ERP 6 EHP4

Hi all,
I have a error in TP_ACTION_CP2STRIG phase, please check the error..
SAPEBBQ701.GE3
3 ETW685Xstart copying of "R3TRTABUKSML" ...
4 ETW000 Mon Jul 26 09:36:14
2010 104301412 359.495280
4 ETW000 OCIStmtExecute() failed with
-1=OCI_ERROR 26 359.495306
4 ETW000 SQL error
942: 17 359.495323
***4 ETW000 **LOG BZA=>table KSML~ does not**
*exist on database *
4
ETW000
69 359.495392
2EETW000 sap_dext called with msgnr "2":
2EETW000 -
db call info -
2EETW000 function: db_xrtab
2EETW000 fcode: RT_INSERT
2EETW000 tabname: KSML~
2EETW000 len (char): 182
2EETW000 key: 00099999900000010000
99999493990000000000100 00000000 000
2EETW000 retcode: 2
2EETP200 Export with errors, request will not be imported
1 ETP150 MAIN EXPORT
1 ETP110 end date and time : "20100726093614"
1 ETP111 exit code : "12"
1 ETP199 ######################################
4 EPU202XEND OF SECTION BEING ANALYZED
Thank you
Rogério

Hi,
I used the latest version of R3trans but the problem not solved.
I used the SAPEHP Inst with the patch 32 but the problem not solved.
In outhers ERP system with EHP 4 the table KSML~ not exist.
The OSS with SAP opened.
Thank you.
Rogério

Spam error in xpra_execution phase

Similar Messages

Maybe you are looking for