Spam has become unmanageable

Hi,
My spam has become somewhat unmanageable.
Although I have spamguard on, I seem to get as much spam in my spam folder as my inbox. I know it's a losing batle, but I've kept adding spam addresses to my blocked addresses list, but it's now approaching it's 500 address limit.
Is my only option to get a new email address, and re-sign up for everything (newsletters etc.)? Any other solutions I could try?
Thanks in advance.
David

davidncohen wrote:
Hi,
My spam has become somewhat unmanageable.
Although I have spamguard on, I seem to get as much spam in my spam folder as my inbox. I know it's a losing batle, but I've kept adding spam addresses to my blocked addresses list, but it's now approaching it's 500 address limit.
Is my only option to get a new email address, and re-sign up for everything (newsletters etc.)? Any other solutions I could try?
Thanks in advance.
David
Hi.
A block address list is frankly pointless as spammers hardly ever use the same email address as the "From" address each time. It is usually random, or forging existing ones.
I find the anti-spam system very good, and although I have the setting to receive all the emails, including spam set - I hardly get any.
Are these emails general rubbish, or are they of a typical nature ?
I personally have my own domains, and for each company I deal with, I set up a unique email address for them. If I receive spam on any of them, I can delete that email address and know that the company has been "bad".
As already mentioned, the disposable addresses can be used, set up via webmail under Options/Mail Options/Disposable. Typically you won't normally use these to send emails.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Similar Messages

Premiere Pro CS4.2.1 preview window has become jerky (more details)

I am using a PC, Quadcore (Athlon II X4) 64 bit Windows 7, 4 internal Hard drives (all single partitions, NTFS), 8GB RAM. I am using Production Premium CS4. My graphics card is an ATI Radeon 4850 running the latest Catalyst drivers (or at least the ones from 3 days ago). I am using 2 TFT monitors, both running at a resolution of 1280x1024.
The hard drives are arranged as:
80GB windows drive (where CS4 is installed): 14GB free
500GB: Cache files stored here: 270GB free
2TB: raw footage for a new project: 844GB free
1.5TB: scratch files and all other project files stored on here: 204GB free
I put in a new Internal 2TB harddrive & installed a black magic plugin for some high def footage (the decklink software from www.blackmagic-design.com)
All preview playback in Premiere Pro has become jerky and unmanageable: only a few frames per second. Before installing the blackmagic plugin playback was smooth with all video sizes, now I can only achieve smooth playback with a tiny (~10% size) preview video.
I tried uninstalling the black magic plugin and changing catalyst control centre settings (regarding playback) neither of which worked. I tried to do a system restore on the windows drive, but this failed. I also tried disabling hard disk indexing for windows search in case this was having an effect, but it seems to have made no difference.
I have tried everything could find on message boards; old DV footage that was fine previously will no longer play smoothly it seems likely to me that this is a software configuration issue.
I have an ATI Radeon 5670 card which I'm going to try today. Other people have mentioned switching to nVidia cards, but I don't want to shell out for a new graphics card unless it is guaranteed to solve the problem once and for all.
Any help would be greatly appreciated, if any more details would be useful then let me know and I'll post more information.

I've just removed a large number of temporary files, uninstalled a few unnecessary programs (e.g. nero) and have moved the swap space away from the OS drive to being spread over the other drives. I've disabled disk indexing, removed unnecessary windows services and run CCleaner. I also followed (most of) your guide on setting a system up for optimum performance.
I should note that Windows Media Player doesn't have a problem with playing large files, and so it appears the problem is localised to Adobe software.
The time taken to render DV footage has increased dramatically almost tenfold. This is something of a guess, but could Adobe be using the CPU to render video instead of the GPU?
This might not be relevant, but the timeline bar flickers when I'm previewing a video.
Disk space is now:
80GB:    43GB free
500GB:   255GB free
2TB:       696GB free
1.5TB:    349GB free
I tried creating a project that didn't use the 1.5TB disk, but it exhibited the same problem.

I Fear My Mac Has Become A Zombie

I recently came into the 21st century and took the DSL plunge, but I fear that my machine has become a zombie; I'm getting a ton of email (on Mail) that looks like responses from spam filters that are rejecting messages that were never sent by me. (The subject lines are almost all "Returned Mail" or some variant thereof or the messages are from "Mail Delivery Subsystem.)
Does this sound like a zombie or just garden variety spam of a particularly homogenous sort? And if I get the latest version of Norton for OS X will it give the zombie(s) a well-deserved shotgun blast to the head?

That's what I'm trying to figure out: Is my machine
infected with some sort of malware that is causing it
to function as stealth spam generator. If it is, how
do I stop it? If it's not, what the heck is going on?
The most likely explanation is that you're the victim of a "Joe Job". Especially if your ISP is a big, well known one and your username is kind of common.
Otherwise, have you downloaded and installed any software recently from sites you aren't sure about? I don't know of any email zombie programs for the Mac, but that doesn't mean there aren't any.
Also, do you have a router/firewall? Or is your Mac connected directly to the DSL router? A router should protect you from most attacks, especially if you haven't fiddled around with its setup. If you don't have a router, do you have a good password on your computer? Preferably something with numbers and letters, and not in any dictionary.
Finally, you can use the "Activity Monitor" application from your "Utilities" folder to watch the network activity. There will always be some small amount of activity periodically, but if you see a steady amount of more than a few KB once in a while, then maybe you do have something going on.
charlie

As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version. How can change it back to the laptop version?

As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version. How can change it back to the laptop version 5.7?
Thanks for any help you can provide.

LR on your laptop is still a desktop version. It is just now able to upload to the cloud to replicate photos to either http://lightroom.adobe.com/ or an iPad that has LR Mobile installed.
I think you probably just want to change the LR 5 identity plate back so it doesn’t mention LR Mobile all the time. Hover over the identity-plate area, and click on the little triangle that appears, then choose Change Identity Plate.

"Remote" App Has Become Sluggish, Slow to Respond

I've searched this and other forums and have yet to see the issue I'm having addressed. After successfully installing and using the iPhone "Remote" app to control my Apple TV, its performance has become erratic. While selecting and/or swiping actions were instantaneous, they're now delayed, sometimes by four or five seconds. My Apple IR remote still works perfectly. Also, the Remote app on my iPhone works fine on the TV set up in various Apple Stores I've visited. A clue that may be relevant is that my RF Dish receiver remote is a bit slow now, too, although not as bad as the WiFi-driven iPhone Remote app. It seems that something in the room is creating these problems (there are no fluorescent lights) and all worked fine months ago. Anyone have any ideas on what might be causing this? (I didn't post this on the Apple TV forum since that device and its dedicated remote are functioning normally.)

Encountered this too and only recently. In my case appears to coincide with downloading most recent version of iTunes.

IPhone "Remote" App for Apple TV Has Become Sluggish, Slow to Respond

(Earlier today I posted this question on the "iPhone" section of this thread but perhaps it's more appropriate here.)
I've searched this and other forums and have yet to see the issue I'm having addressed. After successfully installing and using the iPhone "Remote" app to control my Apple TV, its performance has become erratic. While selecting and/or swiping actions were instantaneous, they're now delayed, sometimes by four or five seconds. My Apple IR remote still works perfectly. Also, the Remote app on my iPhone works fine on the TV set up in various Apple Stores I've visited. A clue that may be relevant is that my RF Dish receiver remote is a bit slow now, too, although not as bad as the WiFi-driven iPhone Remote app. It seems that something in the room is creating these problems (there are no fluorescent lights) and all worked fine months ago. Anyone have any ideas on what might be causing this?

ok well it seems unlikely that your issue is with the appletv itself.
could well be wifi interference.
any cordless phones or cordless doorbells, or any new cars turned up close by with remote car alarms, or a new microwave (or old one starting to fail) ? all this sort of stuff can kill wifi.

I was trying to move iphoto library to my external hardrive, realised it was incompatible with Mac. The iphoto will not open now, message is "Iphoto library is either in use by another application or has become unreadable". I have read other posts.

Hi,
I was trying to save a copy of my iphoto library by copying images to my external harddrive. I wasn't sure how to do it, realised the hard drive is not compatible. Now the iphoto library wont open and reads "iphoto library is either in use by another application or has become unreadable".
I have tried to use options command and click on iphoto then rebuild yet nothing happens and same error message occurs.
I have gone to my personal drive, desktop, iphoto library, and found file Albumdata.xml and when i click on it, there is a lot of text in it, i am assuming these are all my photos.
I have tried clicking and dragging this file to iphoto app and it doesn't work, as the same error comes up in iphoto being in use or unreadable....
What am I meant to do with albumdata.xml file and how do I reopen Iphoto from here on in?
Please help as I am not technically minded and still trying to understand how to use the Macbook at all as I am used to Microsoft.
Thank you very much,
KS

Rule Number One - NEVER go directly uinto the iPhoto library - there are no user servicable parts in it and making any change no matter how small can corrupt your library and cause data or photo loss
Exactly how were you trying to save a copy of your iPhoto library?
Albumdata.xml does not contain your photos - and again NEVER make any changes to the content of the iPhoto library - no dragging - no changes - never go into the library
We need to know exactly what you did
And probalby the easiest solution is to load your backup from before you messed things up
For reference after you get things working
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

My Macbook Pro has become slow

10.6.7
Model Name:          MacBook Pro
Model Identifier:          MacBookPro4,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          800 MHz
Recently my Macbook Pro has become sort of lagging. The lagging is sort of intermittent, but is possibly becoming more frequent. Sometimes when I type, it takes a while to catch up and gives me the rainbow wheel mouse while this happens. I have been getting the rainbow wheel thing a lot lately due to lagging in typing or clicking a link and it takes (seemingly) forever to load (based on how fast it used to be). Sometimes when I scroll using the trackpad (my main method of scrolling), it takes a while to actually scroll. When I open a new tab, what should be my top sites sometimes is a distorted/pixelated picture of black or black and white or whatever was on the screen previously. I am also having a lot of flash problems: I'll be using the internet and then randomly the flash will just close and I'll get an apple pop-up saying that my flash program unexpectedly closed and I should send a report to apple. I refresh the page and the flash is working fine, but the closing will still randomly happen. I use my macbook pro mainly for internet use and microsoft office use since I am a student. This only started recently and I haven't used any microsoft office products since before this started so I have really just been using Safari (it's been a while since I've used firefox also). Therefore, I don't believe an application is causing this. As I am typing this, I ran a software update and found that 10.6.8 is available. I think I will hold off until I get a few responses on this discussion. This computer is JUST over three years (my extended warranty just ran out... of course).
Thank you for reading my post. I greatly appreciate any help I can receive.
Sam

Run ALL of the free OnyX maintainence and cleaning aspects and reboot.
Run OnyX > Verify > Preferences and write down any corrupt ones, move them to your trash and reboot
http://www.titanium.free.fr/
Check the status of your browser plug-ins here and update.
https://www.mozilla.com/en-US/plugincheck/
Use Firefox, it's faster and more secure browser with tons of great add-ons.
Use the free LibreOffice, it will read all your OfficeMac files, is better written than Microsoft's buggy stuff, more secure too.

Pages on my iPad3 has become very slow to open documents after upgrading to ios7. I've clicked on a folder 5 minutes ago and am still waiting. The work-around seems to be to force-close it, but I've needed to do this many times in the last few days.

Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
Thanks
Mark

Pages on my iPad3 has become very slow to open documents after upgrading to ios7.
I posted on here about this a few weeks back and someone suggested force-closing Pages -- and that does indeed enable me to open things -- but I have had to force-close many times in the last 24 hours, which is worrying. Are there any other suggestions?
I am sometimes also finding that, when I have been writing something and then click on "documents" the screen goes blank, there is a wait of around a minute and then the same document is re-displayed, before clicking "documents" again lets me look at other documents -- which is a pain if I am trying to move between documents repeatedly. Again, words of wisdom on this would be great.
Pages under iOS6 opened quickly, and there was an immediate loss of performance when I upgraded. I am finding this very frustrating because I don't feel that the new Pages has added to the facilities I was using, but a slowness to open documents is frustrating.
Thanks
Mark

All my photo's are missing from iPhoto and I'm getting a message "your photo library is either in use by another application or has become unreadable"

Yesterday when I opened iPhoto all of my photo's were missing. After many hours of frustrating time looking how to resolve, I decided to try again this morning. When I tried to open iphoto, I got the message I referenced above regarding the library is either in use or has become unreadable.
My photos are not in iPhoto anymore. There's nothing there. iphoto acts like its never even been set up. I have iPhoto '11 version 9.4.3. I have OS X Lion version 10.7.5. However, when I go to "All My Files" and then under "images", there are over 10,000 images. I see my photos (I guess it's all of them - i have no idea how many there were) and other "images" also. When i go to "pictures" I only see the 15 or so items I have scanned. In "iPhoto Library", there is 1 picture of what looks like a deck of playing cards with flowers on them - I don't know where that came from. But also in "iPhoto Library" under the heading "desktop", it shows a size of over 27GB and under "kind" it says "package". Still under desktop and "Photo Booth Library" it shows 53GB and under "kind" it says "Photo Booth Library". Before I opened iPhoto to view my photo's, I went to "empty trash" yesterday (not in iPhoto) and it showed over 65,000 items to delete. There were no more than 200 that I could actually see. So, I don't understand. I let it delete a couple of thousand before I stopped it because I didn't know what it was doing. I know - not too smart. I don't know if that has anything to do with iPhoto or not; I'm just throwing that out there. Today I went to "empty trash" and it now shows the 200 items that I can see in there. Don't know what happened.
I do have a time capsule but not sure if I’m using it correctly. If you were to tell me to restore to a certain point, I’d have to be walked thru the process.
I downloaded “iPhoto Library Manager”, not exactly sure how to use it, but got a message basically saying the library nor the database could be loaded and that album data file for the library “iPhoto Library” could not be read.
I’ve spent hours and hours and hours searching the web for answers but I’m scared to do much of anything thinking I could end up losing all my photos if I haven’t already.
Please help!
Thank you!
James

Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

How do I re-open and get back into my iPhoto if this message appears: "Your photo library is either in use by another application or has become unreadable"? What do I do?

How do I re-open and get back into my iPhoto if this message appears: "Your photo library is either in use by another application or has become unreadable"? What do I do?

Rebuild your iPhoto Library:
iPhoto 6 and later: Rebuilding the iPhoto library

How do I restore my iPhoto. When I open i get a window dialog "Your iphoto library is either in use by another application or has become unreadable shut down and restart your computer. If problem persists, try rebuilding your iphoto library. To do th

When I try to open iPhoto I get a window dialog that says...
Your photo library is either in use by another application or has become unreadable
Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.
I have tried the reopen it while keeping the Option and Command keyes pressed.
No change.
I dee nothing but a blank page,
Any help would be appreciated.
Also hace back ups of all images on cd's. dvds and jump drives.
Any advice is appreciated.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

My 2011 Macbook has become exceedingly slow after upgrading to Mountain Lion.

I have a 2011 Macbook which has become really slow after I upgraded to Mountain Lion in March. At first it wasn't that bad, but it's getting worse and my computer has begun to overheat even if I'm only using Google Chrome. I used to be able to keep multiple applications open at once and never closed many of them, but now if I want to get anything done I have to use the absolute minimum. My CPU has reached 86 degrees Celsius and temperatures slightly below this seem to be the average, even if I've only been on for ten minutes. It heats up VERY quickly. The fan has been operating at 2919 rpm, but it has said that for days and I don't know if this number should be changing? (I know that normal is about 2000 rpm, so I know it shouldn't be that high anyway.)
I'm currently working on cleaning out my harddrive of duplicate and unnecessary files and I plan on restoring to the default settings and backing everything up on an external harddrive... but are there other things I should be doing to speed my computer back up, like good programs to clean out my computer's temporary memory on a regular basis? The problem seems to have come on pretty fast though, so I don't know if there could be something else wrong with it and if I should take it into an Apple-approved repair place.
Also, I'm not one to illegally download/pirate things from sketchy websites, so I highly doubt a virus is the cause, especially given that Macs rarely get viruses.
Any suggestions of what to do and what programs/apps to install would be greatly appreciated! Thank you!

I have a 2011 Macbook which has become really slow after I upgraded to Mountain Lion in March. At first it wasn't that bad, but it's getting worse and my computer has begun to overheat even if I'm only using Google Chrome. I used to be able to keep multiple applications open at once and never closed many of them, but now if I want to get anything done I have to use the absolute minimum. My CPU has reached 86 degrees Celsius and temperatures slightly below this seem to be the average, even if I've only been on for ten minutes. It heats up VERY quickly. The fan has been operating at 2919 rpm, but it has said that for days and I don't know if this number should be changing? (I know that normal is about 2000 rpm, so I know it shouldn't be that high anyway.)
I'm currently working on cleaning out my harddrive of duplicate and unnecessary files and I plan on restoring to the default settings and backing everything up on an external harddrive... but are there other things I should be doing to speed my computer back up, like good programs to clean out my computer's temporary memory on a regular basis? The problem seems to have come on pretty fast though, so I don't know if there could be something else wrong with it and if I should take it into an Apple-approved repair place.
Also, I'm not one to illegally download/pirate things from sketchy websites, so I highly doubt a virus is the cause, especially given that Macs rarely get viruses.
Any suggestions of what to do and what programs/apps to install would be greatly appreciated! Thank you!

How do I import folders from one library to another? My original library has become to large and I want to split it. There is not enough memory to select all the folders I want to move to create a new library.

I also created a new library and tried file-import but cannot see / access any files in the original aperture library with that command.

If you use the Command to Export Project as New Library, then such a Library can be imported into another Library with the command to Import Library/Project. The first such export as New Library can be the"seed' Library for starting the process.
But the most important point is there is no performance gain from small Libraries where you think one has become too large, if the new Library is to be on the same disk drive as the original. My primary library is 1 TB in size, and works as well as tiny test libraries.
Ernie

Hello, i have updated my iphone 5 black 16 gb to ios 7 ios 7.0.2 (11a501) and my battery has become worse it gives 9 hours of usage with out doing anything, i have done everything i tried, not using my iphone as well but still no change at all!

hello, i have updated my iphone 5 black 16 gb to ios 7.0.2 (11a501) and my battery life of my iphone has become worse it gives 9 hours of usage with out doing anything, i have done everything every tip that is available online i had 3gs and 4s so i know how to save battry life,i even tried not using my iphone as well but still no change at all!. i have upadted to ios 7.0.3 then downgraded it , i thought battery may be an issue ,so i put brand new battery still no change , so what should i do ? , update to the latest version which is ios 7.0.4 or wait for the ios 7.1 , i was using iphone 4s running on ios 6.1 it gave me 3 days of battery timing , iphone 5 seemed to be very bad for me ,help ! ?
its facory unlocked btw

Try to do a reset, if it doesn't work try remove recently added apps this may solve your problem ( like google app because it has happened with me)
Take a look at apps using your location service in privacy, it can cause battery draining.

Spam has become unmanageable

Similar Messages

Maybe you are looking for