SPAM--How to cleanup new support packages list

Hi,
When i run SAPM T-code and click on "New Support Packages" ,it diaply
too many packages with status "not imported"..
i need to remove all of them make this empty.
How would i remove them from the list?
Thanks
Ram

Good afternoon, Ram - While in SPAM, you can go to "Environment --> Electronic Parcel Service --> Goto --> Inbox". Then you can put a check mark next to the support packages that you want to delete. This removes the support package from the queue, so if you want it back in you would have to reload the data file and cofile and then in tcode SPAM go to "Support Packages --> Load packages" and either load them again from your desktop or ftp the files to the "/usr/sap/trans" directory and use SAPCAR to unpack them again.
I hope this helps!
Regards,
Blair Towe

Similar Messages

  • How to import all Support Packages simulteneily support Package Manager EBP

    Can any body tel me how to apply all support package sumultanesoly by using support Package Manager EBP/CRM option in SPAM.
    I could not able to select all pactche at a time.It selecting one patch at a time only
    Regards
    G Sasikanth Reddy

    I solved my self by selecting highest level of patch so that its dependencies can also add to the queue.
    Regards
    Sasikanth Reddy

  • How to apply java support packages.

    hi all,
    i applied support packages for 4.7EE but i dont know how to apply java support packages.
    can anyone explain about how to apply  java support package for netweaver s??
    from scratch anyone can explain.
    regards
    vijay

    Hello Vijay ,
    Java Support packs can be installed without using SDM also if you are on NW2004.
    Process:
    Eg SP18
    Download the following DVDs
    1. WebAS 6.40 SP18(Part 1/4): SAP Installer
    2. WebAS 6.40 SP18(Part 2/4): SAPInst Control File for Oracl
    3. WebAS 6.40 SP18(Part 3/4): OS Depend. parts of Java RuntiA
    4. WebAS 6.40 SP18(Part 4/4): OS Indep. Parts of Java Runtime
    Uncar each of them in the sequence
    1,4,3,2
    Once u uncr then u will get some more uncarred files
    eg D:\sapinst\J2EE-RUNT-CD\SCS\NT\I386\SCS.SAR uncar it into run directory : DIR_CT_RUN ( D:\usr\sap\SRX\SYS\exe\runU)
    Note: The value of DIR_CT_RUN can be found In Profile SRX_SCS01_B3BPH1W)
    Run SAPINST
    Note:Give RFC user as 000 DDIC
    Java Support packs can be installed using JSPM  if you are on NW2004s
    1)Download SP Stack or SP
    2)Copy the SCA files to /usr/sap/trans/EPS/in
    3)Execute the JSPM go.bat from \sapmnt\SID\DVEBMGSXX\j2ee\JSPM
    4) Provide SDM Password
    5 ) Select the Traget SP level .
    6 ) Deploy.
    Also, you can find the current SP Level in http://localhost:5<instance numeber>00 and then system information.
    Regards ,
    Santosh Karadkar <a href="https://forums.sdn.sap.com/click.jspa?searchID=-1&messageID=3819594">Click here for further info</a>

  • How to find and apply new Support Packages?

    Hi to everyone.
    The system is SAP R/3 Enterprise (may 4.7 ext2?)
    The spam version is 6.20/0020
    i have to update the support packages, so i went on https://websmp107.sap-ag.de/swdc, but i dont know what SP i have to download.
    the situation is (so i have to update all of them?):
    SAP_BASIS     620     0059     SAPKB62059
    SAP_ABA     620     0058     SAPKA62058     
    SAP_APPL     470     0018     SAPKH47018     
    SAP_HR     470     0058     SAPKE47058     
    EA-IPPE     200     0004     SAPKGPIB04     .
    PI     2003_1_470     0002     SAPKIPZH52     
    PI_BASIS     2003_1_620     0002     SAPKIPYH52     
    ST-PI     2005_1_620     0002     SAPKITLQG2     
    EA-HR     200     0015     SAPKGPHB15     
    LSO     200     0018     SAPK-200PIINLSO

    For eg. for 4.6C you have upto 52 in BASIS ,ABAP,and cross application components.
    you download 43..44..52 and using SPAM you can upload from front end or you can uncar them on the App.server.
    However, during the course of implementing patches, during the SPDD and SPAU phase system gives the option to retain the changes that are  made to standard programs / objects / tables etc or to reset the objects to SAP standard objects. It is during these changes only that the functional consultant has to study the program/changes which are done and the impact of the changes.So when you come through this SPDD or SPAU phase you have to make sure from your ABAPers and functional consultants regarding whether to reset all to original or retain the changes.This is crucial otherwise you will impair your business unknowingly.
    Click on the info button beside the support pack name and see the dependencies.
    The order of applying patches will be BASIS,ABAP,Cross application components,HR etc...
    And finally it's not the case that we should go for applying a support pack because it's available at SAP market place.

  • How to make new scop of list and selection parameter in ME2L or ME2M

    Hi,
      As there are many reports avaliable ,  in ME2L and ME2M  there is scope of list and selection parameter on the selection screen,  i want to know how we can create new scope of list and new selection parameter.
    regards,
    zafar

    IMG ---> Material Management ---> Purchasing ---> Reporting ---> Maintain Purchasing Lists ---> Scope of List ---> Define Scope of List

  • How can I get Support Packages for SAP NSP 2004s?

    Hi together,
    I have installed the SAP NetWeaver 04s Sneak Preview.
    How can I get the support package stacks (SP 6 and SP 7)?
    I have only a small OSS-User for 'Freie Berater' (Free  Consultants). With that OSS-User it is not possibel to download the the support package stacks SAP Support Portal.
    Kind regards, Eva

    Hi Daniel,
    the sp-level is 5. You can find it via system/status/ in the section 'SAP System data' (klick at the detail-icon).
    Web Dynpro for ABAP works with that version. But I would like to have the newest sp-level. Our Web Dynpro teacher gave us some example sources and said that some of them might need sp 6. But I didn't test it.
    I have another question: Have you worked in the MARK project a few years ago? There was a collegue named Daniel Kotte.
    Kind regards, Eva

  • How to cleanup the "custom" genre list

    The genre custom list is very large and has many in there that I don't use or want. Is there a way to remove some of these?
    Thanks!

    I'm afraid you are misinterpreting the list. Custom is at the top and when you click on it it allows you to type in a genre of your own making. Unless you have made some custom genres all of the genres on the list you are seeing are the default ones. I have read few methods for removing entries from the list but they all involve editing preference files which I wouldn't recommend unless you are very sure of what you are doing.

  • Install new support package

    Hi
    I installed new portal with sp9 .
    I want to install sp 15 for j2ee , portal and cm.
    Do i need to install sp 10,11,12,13,14 and then
    SP 15 or can i mmediately install sp 15 .
    Thank You
    Amit Zait

    Hi amit,
    You can check the SP Stack guide at http://service.sap.com
    /nw04 -> Maintanence -> SPS15 -> English help.
    You do not need to install all the SPs from 9 to 15, but
    there may be some SPs required. If so it will be described
    in the guide as "prerequisites"
    Regards
    Srikishan

  • Spam/saint update and support package

    Hi,
    our solution manger server is crashed long back.Now i installed the solution manager in seperate server.
    solution manager iam getting SPAM/SIANT version as 7.00/0.20 and in development/production SPAM/SAINT version in 7.00/0.23.
    as per check in service market place under SPAM/SAINT update 700 iam getting SPAM/SAINT update version 700 iam got the message as to import  Support Packages SAPKH60008 and SAPKGPAD08. Please advice.
    *in solution manager support package is
    SAPKB70008
    SAPKA70008
    SAPKIPYJ78
    SAPKITLQI2
    SAPKW70008
    SAPKNA7005
    SAPKU50005
    SAPK-40005INCPRXRPM
    SAPKITL416
    SAPK-15074INSTPL
    SAPKITLOG3*
    *in dev/produ system support package is
    SAPKB70011
    SAPKA70011
    SAPKIPYJ7B
    SAPKITLQI3
    SAPKW70012
    SAPKNA7008
    SAPKE60015
    SAPKH60008
    SAPKGPID08
    SAPKGPGD08
    SAPKGPRD08
    SAPK-60008INFINBASIS
    SAPKGPPD08
    SAPKGPFD08
    SAPKGPHD15
    SAPKGPDD08*
    please advice me in service.marketplace>downloads>support packages and from where i will get packages as in dev/production system.
    Regards,
    Asif

    Hi Asif,
    How to get particular support package from service market place .
    EX:SAPKB70011
    If you want to download the patch SAPKB70011:
    Service Market Please --> Downloads --> SAP Support Packages --> Search for Support Package and Patches.
    At the search field, enter SAPKB7001* it will give you all the support package from SAPKB70010 to SAPKB70019 if available.
    You can add the required patch to your download manager.
    Thanks & Regards,
    Nagendra.

  • Hi all - how can i see the history of support package

    hi have install new support package .
    and now i want to view the history of the sp ,  where can i see it ?
    eyal

    Hai,
           if you want to see the history of support package for JAVA (Web AS JAVA),
    Goto the URL : <b>http://<host name>:<http port of Java stack>/</b> --> select System Information --> Show all components --> it will display all Java SP's that you have deployed in your J2EE engine.
    regards,
    Gopinathan.

  • Import support package

    Hi,
    I need import package KH60014.SAR. How to import it? I performed unpack this package in /usr/sap/trans directory. After that, I use SPAM t-code. But I can't go to menu option Support Package->Load Packages->From Application Server. Menu "From Application Server" disabled. When I click "display/Change", it appear "OCS package Queue is empty" on status bar.
    Please help me!
    Thanks
    Duypm

    As suggested before: Create a new user in client 000 and log on with it before running SPAM/SAINT !
    The package KH60014 might have a prerequisite which is not in place.
    In transaction SPAM, Mark "New Support Packages" and press "Display".
    The new package should appear in the list and you can see if the package has any prerequisite sets.
    If you can not find the package iin this way,
    you can check if the parameters DIR_TRANS and DIR_EPS_ROOT are correct.
    Start transaction SE38, enter program RSPARAM and press F8 twice
    (once to run the program and once at the selection screen).
    Check the value for DIR_TRANS and DIR_EPS_ROOT.
    If you unpacked the package at /usr/sap/trans, then
    DIR_TRANS should have the value /usr/sap/trans and
    DIR_EPS_ROOT should have the value /usr/sap/trans/EPS.

  • PAT file not shown in Support package manager

    Hi All,
    We had to create a custom BAPI to achieve an functionality in our product.
    We are doing this for the first time.
    As a standard procedure we followed the AAK (Assembly Add On ) toolkit to create the deploy-able.
    Finally in the consolidation system we could see the following PAT file created in the out directory.
    QA70020777848_0000002.PAT
    I copied the file to the in directory of the production SAP server where this needs to be deployed.
    I ran the transaction SPAM on the server.
    Load packages from Application server
    QA70020777848_0000002.PAT    SAPK-170COINCOMPANY1    @EB\QUpload Already Occurred@    0004    OCS file already exists in inbox. Upload not required.
    IT decompresses the file properly.
    Now the problem occurs ahead.
    IF i click on the New Support package nothing is shown visible .
    Am i missing any steps here.
    Regards
    Manoj

    Got the solution in fact it's not a solution it's just an awareness on how the disks are available in fail-over cluster manager.
    1) All the available disks are shown in fail-over cluster manager "storage".
    2) While installation it asks us to add available disks for SQL Server then add accordingly. (Ex: E:drive for data files and L:drive for Log files) 
    3) Once the installation is done you see those disks in MSSQL (SQL Server) group.
    Means when you click on Active node it should show you MSSQL (SQL Server) group in which you can find network name, network ip, E: & L: Drives, SQL Server and Agent services.
    Note: MSDTC and Quorum are also clustered disks which can reside (Preferably Active Node) in any of the nodes but automatically fail-overs to active node in case of any passive node failures.
    Regards,
    Kalyan
    Grateful to your time and support. Regards, Shiva

  • How can upgrade the support pack?

    hi all
    I was download some file as *.SAR
    but I don;t know how can I upgrade it?
    and how can I check the version in my SAP and what impact info after upgrade the new support package? (e.g. in web..etc.)
    thanks very much
    Regards
    Kevin

    Hi Kevin,
    This will help.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCUPGOCSSPAM/BCUPGOCSSPAM.pdf
    http://help.sap.com/saphelp_nw04/helpdata/en/83/7a18ecde6e11d195460000e82de14a/frameset.htm
    http://www.saptechies.com/sap-patch-manager-spam-bcupgocs/
    Regards
    Ashok Dalai

  • Release BI 7.0 front-end add-on for SAP GUI 7.10, Support Package 700

    Hi guys,
    In SAP note 1238872 the release of new support package has been mentioned (Quote: "Download the BI 7.0 front-end add-on for SAP GUI 7.10, Support Package 700 from the SAP Service Marketplace.")
    So, can someone tell me, when this Support Package will be released?
    (At the moment the last version provided in download area is 6.02)
    Kind regards
    Markus

    Thanks, but my question was not how can I workaround, cause I was able to read that note. (Unfortunatly the workaround solves the problem for the query designer only and the error still persists when executing the query)
    However, can some one please tell me, when the Support Package 7.00 will be released?

  • Installing Addon Support package (ST-A/PI)

    Hello,
    Our Earlywatch report is shouting about needing to upgrade ST-A/PI.
    So I've used Maintenance Optimizer to download the package, placed it in EPS/in and un-carred the file.
    Then I've then gone to SPAM and tried "Support Package > Load Package > from Application Server"
    I've then gone to Display/Define and select component ST-A/PI with the following results:
    "No Support Package found for this selection"
    I have then tried to Upload from Front End instead of Application Server, with the same results.
    I've raised a call with SAP but as usual it's now been 4 days without so much as a change in status so I'm hoping someone on here may have an idea.
    Many thanks.

    Ok guys, thanks for the replies.  I haven't given you enough information.
    Let me try fill in some gaps.
    The result after I selected Load from App Server is to show me the .PAT file and tell me in the message text that:  "OCS file already exists in Inbox.  Upload not required"
    However, if I select "Display" when "New Support Packages" is selected in SPAM, I see nothing with a note at the bottom stating "No OCS Packages found for this selection"
    Maintenance Optimizer seemed to want me to select components I did not want to patch. I had a total of 110 files added to my download basket to download the one file I needed!
    That file was titled "Servicetools for other App./Netweaver 04s"
    I've already installed the ST-A/PI addon using SAINT.  This recommendation is to install Support Package SP02 for ST-A/PI.
    The recommendation also appears if I run RTCCTOOL in SA38 as well.
    I definitely have the correct permissions to run this and, for the record, I have both the .SAR file and the "uncarred version" sat in EPS/in.
    Thanks again.

Maybe you are looking for