SPAM IMPORT_PROPER Phase delay

Hi all,
I have SOLMAN 7 EHP1 SP 24. in a windows host, with Oracle database.
I just update my spam to latest version 7.01/0041
then i need to updatethe component "ST-ICO 150_700" my actual SP is 24, i need get updated to patch 0025.
I add to the queue only this ST-ICO component.
In sm37 I see the job running without errors.
Job Spool Job Doc Job CreatedB Status Start date Start time Duration(sec.) Delay (sec.)
OCS_QUEUE_IMPORT 71360900 Active 19.01.2011 16:21:02 55.578 0
In spam in action log see that all previous phases was successfully finished, for example the latest phase was Import phase 'DDIC_ACTIVATION' .
but in IMPORT_PROPER Phase is taking more than 16 hours right now.
If is just a ST-iCO component why this take so long? Is normal this behaviour?
Where can i see detailed log of actions, or how can i ensure me that all is running ok?
Thanks a lot
update: in tp system log i see so many lines with this:
WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17060), I'm waiting 2 sec (20110120064823). My nam
WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17070), I'm waiting 2 sec (20110120064853). My nam
WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17080), I'm waiting 4 sec (20110120064921). My nam
WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17090), I'm waiting 2 sec (20110120064952). My nam
WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17100), I'm waiting 1 sec (20110120065010). My nam
WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17110), I'm waiting 3 sec (20110120065038). My nam
WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17120), I'm waiting 5 sec (20110120065117). My nam
WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17130), I'm waiting 1 sec (20110120065153). My nam
WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17140), I'm waiting 4 sec (20110120065222). My nam
WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17150), I'm waiting 1 sec (20110120065259). My nam
WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17160), I'm waiting 2 sec (20110120065332). My nam
WARNING: \\solman\sapmnt\trans\tmp\SAPKK-1507PINSTPL.SSM is already in use (17170), I'm waiting 3 sec (20110120065404). My nam
I wiil try restart the import .
Edited by: Manfred Kaufmann on Jan 20, 2011 1:55 PM

Thanks for the tip. This seemed to resolve my issue.

Similar Messages

SPAM version 36 is struck in import_proper phase of Prologue for crm rel700

Hi Gurus,
While updating the spam version to 36 in crm 700, its throughing the below message. I checked tp tool, consistency check, everything seems fine.
any idea what may casue this problem, as my spam is struck in import_proper phase of Prologue
The installation was stopped, since an error occurred during the phase
IMPORT_PROPER, which the Add-On Installation Tool is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
      -   Error in phase: IMPORT_PROPER
      -   Reason for error: TP_STEP_FAILURE
     -   Return code: 0008
   -   Error message: OCS Package ALL, tp step "6", return code 0008
Notes on phase IMPORT_PROPER
   to be continued

In this phase the system imports the Repository objects and the table
   entries. The following are reasons why this phase may fail:
   o   TP_INTERFACE_FAILURE: The tp interface could not be called.
   o   TP_FAILURE: The tp program could not be executed. For more
       information on this, see the SLOG or ALOG log file.
   o   TP_STEP_FAILURE: A tp step could not be executed. To find the cause
       of the error, see the appropriate log, such as the import log.
       If a tp step 6, N, or S is specified in the termination message, it
       is a step that is independent of the transport request. You can vie
       these logs in the log overview by choosing Import Steps Not Specifi
       to Transport Request.
   Alternatively, see the logs in the following files in the log
   subdirectory of your transport directory (usually /usr/sap/trans/log):
        -   tp step 6: P<YY><MM><DD>.<SID>
        -   tp step N: N<YY><MM><DD>.<SID>
        -   tp step S: DS<YY><MM><DD>.<SID>
    To display these files, use the report RSPUTPRT or transaction AL11.
The Add-On Installation Tool requires that the Change and Transport
    System (CTS) be configured correctly. For more detailed information,
    read the online documentation available from Help -> SAP Library ->
    mySAP Technology Components -> SAP Web Application Server -> BC Change
    and Transport System .
    A list of the most important SAP Notes for Online Correction Support
    (OCS) is available in SAP Note 97620, which is updated regularly.
Regards - Munish

SPAM update in IMPORT_PROPER phase

Dear All,
I have installed SAP Web Neweaver 04s as ABAP on MSSQL database windows
OS and upgraded kernel 640 patch 175.
But now when i go to import SPAM /SAINT from level 17 to 23 ie.
SAPKD64023 then its running in IMPORT_PROPER Phase since last 5-6 hrs.
PLEASE SUGGEST how to speed up my process??
Log is as below:
Log Overview for SAPKD64023
SAPKD64023 SPAM/SAINT Update - Version 640/0023
BPW System BPW
Generate Transport Information File 02.01.2008 13:41:45 (0)
Successfully Completed
Test Import 02.01.2008 13:41:46 (0) Successfully Completed
Import Request Piece List 02.01.2008 13:41:47 (4) Ended with Warning
Import ABAP Dictionary Objects 02.01.2008 13:41:52 (4) Ended with
Warning
02.01.2008 10:54:46 (4) Ended with Warning
02.01.2008 13:41:52 (4) Ended with Warning
ABAP Dictionary Activation 02.01.2008 14:13:28 (4) Ended with Warning
Import steps not specific to transport request
ABAP Dictionary Distribution 02.01.2008 14:23:31 (4) Ended with Warning
pls help me ASAP.
Regards & Thanks,
Ankita.

Hi Ankita,
I advice you to leave it for the moment and wait until it finishe that particular stage and check for the workporcess overview which report its executing at the back.Dont stop the process forcefully as it might cause inconsistency.
Regards,
Iqbal

Error in IMPORT_PROPER phase

Hi guys,
I am trying to apply SP on my system 09-15
and I get and import_proper phase error below:
The import was stopped, since an error occurred during the phase
IMPORT_PROPER, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
     -   Error in phase: IMPORT_PROPER
     -   Reason for error: TP_BUFFER_INCONSISTENCY
     -   Return code: 0008
     -   Error message: Pkgs. in queue don"t exist in the tp buffer (e.g.
         SAPKB64010)
Tried the following:
Generated a new TP Parameter through STMS
Clear the log files
Tried to clear the buffer manually with S37 OCS_RESET_QUEUE getting an object locked message.
Updated the Kernel and SPAM/SAINT
Please Help
Thanks,
Damien

Hi All!
I have a similar problem on my Netweaver'04 BW Productive Instance, STMS is on Stuck and no more transport are possible!!!
VERY BAD!!!
I have the SAME error and i checked all the possible but finding nothing interesting
Following a print screen from varous commands such as "TP SHOWPARAMS" "TP ADDTOBUFFER" etc..
Could you check again for me?
Thanks in advance...
G.R.
*0000
*0000
I
BSVK900675          |                    | |0000 |      |      |0000 |      |
*0000
*0000
I
BSVK900677          |                    | |0000 |      |      |0000 |      |
*0000
*0000
I
BSVK900678          |                    | |0000 |      |      |0000 |      |
*0000
*0004
I
BSVK900657          |                    | |0000 |      |      |0000 |      |
*0000
*0000
I
BSVK900659          |                    | |0000 |      |      |0000 |      |
*0000
*0000
I
BSVK900655          |                    | |0000 |      |      |0000 |      |
*0000
*0000
I
BSVK900661          |                    | |0000 |      |      |0000 |      |
*0000
*0004
I
BSVK900663          |                    | |0000 |      |      |0000 |      |
*0000
*0004
I
BSVK900665          |                    | |0000 |      |      |0000 |      |
*0000
*0000
I
BSVK900680          |                    | |0000 |      |      |0000 |      |
*0000
*0000
I
BSVK900681          |                    | |0000 |      |      |0000 |      |
*0000
*0000
I
BSVK900685          |                    | |0000 |      |      |0000 |      |
*0000
*0000
I
BSVK900687          |                    | |0000 |      |      |0000 |      |
*0000
*0000
I
BSVK900688          |                    | |0000 |      |      |0000 |      |
*0000
*0000
I
BSVK900690          |                    | |0000 |      |      |0000 |      |
*0000
*0000
I
BSVK900691          |                    | |0000 |      |      |0000 |      |
*0000
*0000
I
BSVK900692          |                    | |0000 |      |      |0000 |      |
*0000
*0000
I
BSVK900695          |                    | |0000 |      |      |0000 |      |
*0000
*0000
I
that makes 174 transports to be imported.
tp finished with return code: 0
meaning:
Everything OK
C:\Documents and Settings\bpradm>tp addtobuffer bsvk901395 bpr pf=d:\usr\sap\tra
ns\bin\tp_domain_bsv.pfl -Dtransdir=d:\usr\sap\trans
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 340.16.09 (release 640)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBNAME is no longer used.
Addtobuffer failed for BSVK901395.
Neither datafile nor cofile exist (cofile may also be corrupted).
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0247
tp finished with return code: 247
meaning:
addtobuffer has problems with data- and/or cofile
C:\Documents and Settings\bpradm>tp addtobuffer bsvk901395 bpr pf=d:\usr\sap\tra
ns\bin\tp_domain_bsv.pfl -Dtransdir=d:\usr\sap\trans
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 340.16.09 (release 640)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBNAME is no longer used.
Addtobuffer failed for BSVK901395.
Neither datafile nor cofile exist (cofile may also be corrupted).
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0247
tp finished with return code: 247
meaning:
addtobuffer has problems with data- and/or cofile
C:\Documents and Settings\bpradm>tp addtobuffer bsvk901396 bpr pf=d:\usr\sap\tra
ns\bin\tp_domain_bsv.pfl -Dtransdir=d:\usr\sap\trans
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 340.16.09 (release 640)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBNAME is no longer used.
Addtobuffer failed for BSVK901396.
Neither datafile nor cofile exist (cofile may also be corrupted).
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0247
tp finished with return code: 247
meaning:
addtobuffer has problems with data- and/or cofile
C:\Documents and Settings\bpradm>tp help
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 340.16.09 (release 640)
usage:   tp <command> [argument(s)] [option(s)], where <command> may be one of:
Exporting                   I Buffer Actions              I Disk Space
EXPORT       I EXPWBO       I ADDTOBUFFER I DELFROMBUFFERI CLEAROLD
R3E          I VERSE        I SETSYNCMARK I DELSYNCMARK I CHECK
SDE          I              I SETSTOPMARK I DELSTOPMARK I TESTOLD
TST          I              I MARK         I UNMARK       I
              I              I CLEANBUFFER I              I
Importing                   I Special Functions           I Information
PUT          I              I LOCKSYS      I UNLOCKSYS    I SHOWBUFFER
IMPORT       I CHNTABS      I LOCK_EU      I UNLOCK_EU    I COUNT
CMD          I R3I          I WRITELOG     I GETPROTS     I SHOWPARAMS
LIM          I MEA          I SAPSTART     I SAPSTOP      I GO
R3H          I MVREPOS      I GETTBATGENT I GETTRBATENT I CONNECT
ACT          I MVKERNEL     I GETDDXTTENT I GETDDXTFENT I CHECKIMPDP
TACOB        I SDI          I GETOPENCORR I CREATECOFILE I SHOWINFO
GENTB        I GENT1        I PREPAREBUFFERI CREATEINFO   I GETOBJLIST
GENT2        I GEN          I CONTP        I EXPCHK       I EXTRDOCU
DIST         I XPA          I SHOWSEMAPHOREI SHOWSEMACLIENI GETCONVENT
MVNTABS      I VERSI        I SETSEMAPHORE I DELSEMACLIENTI EXPLAINRC
IMPSYNC      I DELIVER      I DELSEMAPHORE I GETTPSTATENT I
For more details call tp with the desired command (and no other parameters)
C:\Documents and Settings\bpradm>tp showparams bsvk901396 bpr pf=d:\usr\sap\tra
ns\bin\tp_domain_bsv.pfl -Dtransdir=d:\usr\sap\trans
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 340.16.09 (release 640)
ERROR: : parameter -Dtransdir=d:\usr\sap\trans has wrong length
Usage of command SHOWPARAMS:
tp SHOWPARAMS <SAPSID> [options ...]
Reads the parameter file and displays the current setting.
Options:
     parname=<name>        display the value of the parameter <name> only
     pf=<TPPARAM>          specify a transport parameter file
     silent                redirect stdout to dev_tp in current directory
     -D"<entry>"           specify a parameter for tp
     -t<k>                 specify a trace level for tp
     tf=<filename>         specify the name of a trace file for tp
     shdwtadir=<tabname>   specify the name of a shadow TADIR
Description of arguments:
     <TPPARAM>   (complete) path of a transport parameter file
     <entry>     a parameter description as in a tp parameter file
     <SAPSID>    R/3 system's name, (target or source whatever is appropriate)
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0206
tp finished with return code: 206
meaning:
parameter %s has wrong length
C:\Documents and Settings\bpradm>tp showparams bpr pf=d:\usr\sap\trans\bin\tp_do
main_bsv.pfl -Dtransdir=d:\usr\sap\trans
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 340.16.09 (release 640)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBNAME is no longer used.
Parameters having their default value are displayed with a '>' as separator.
Global settings:
TRANSDIR : d:\usr\sap\trans\
ALLLOG : ALOG0605.BPR              STOPONERROR >        9 SYSLOG : SLOG0605.BPR            REPEATONERROR>         9
ABAPNTFMODE > t
TP_VERSION :        266
STOPIMMEDIATELY > 1 =TRUE
NEW_SAPNAMES >    1 =TRUE    SQL_TRACE >          0 =FALSE
DUMMY >          0 =FALSE
CTC >          0 =FALSE       NBUFFORM :          1 =TRUE
BUFFERFORMAT >
SSFKEYS >
SSFSIGNER >
SSFLIB >
SSFPAB >
ALLOW_RC4 >    1 =TRUE   SID_LOG_FILES >          0 =FALSE
IMPMON_MODE > NORMAL      IMPSMON_MODE > OFF
TRACE2SERVER >          0 =FALSE
DB-connection:
        CONNECT_MODE > USE_ENV
             MOD_ENV >
              DBTYPE : ora
MSSQL_USEINTEGRATEDS >
        MSSQL_SCHEMA >
      DROPSTATISTICS >          1 =TRUE
    DBS_DB2_PLANNAME >
   RSDB_DB2PSLIBRARY >
Distribution of transports:
       SYSTEM'S NAME : BPR                       VERS_AT_IMP > NEVER
   SEPARATE_DELIVERY >          0 =FALSE
         TESTSYSTEMS :
     DELIVERYSYSTEMS :
       SOURCESYSTEMS :
       TARGETSYSTEMS :
    SAPNAMES_LOGGING : ALL
         VERS_AT_EXP >          1 =TRUE
      CREATE_REPLIST >          0 =FALSE
R3trans:
         R3TRANSPATH > R3trans.exe
         R3TRANSSTAT >
        LOCALR3TRANS >          0 =FALSE
       CLIENTCASCADE >          0 =FALSE
           RECCLIENT >
            LANGUAGE >
                 LSM > NONE
                 SLI >         -1
     CHECKMASTERLANG >          0 =FALSE
        RESTRICTLANG >
        IMPORTSHADOW >          0 =FALSE
      R3TRANSOPTIONS >
           FILESPLIT >          0
          ACC_IMPORT >          0 =FALSE
            DDACTIVE >          0 =FALSE
               SMODI >          1 =TRUE
     PRESERVEMODINFO >          0 =FALSE
      CHEATCLIENT000 >          0 =FALSE
       LANGDELETIONS >          1 =TRUE
Transport daemon:
           BATCHHOST >
           SYSTEM_NR >
           SYSTEM_PF >
          SAPEVTPATH > sapevt.exe
Import in general:
                                                MAINIMP_PROC >          1
                     >          0 =FALSE       LOGICALIMPORT >    0 =FALSE
SETUNICODEFLAG >   0 =FALSE   DDINACTIVE >          0 =FALSE
MAB >          1 =TRUE
R3UP >          0 =FALSELOCK_CHECK_WAIT_TIME >          0
EXP_CHECK_WAIT_TIME >          0                   W_IMPORT >          1 =TRUE
             W_NEVER >          0 =FALSE
            K_IMPORT >          1 =TRUE              K_NEVER >          0 =FALSE
            T_IMPORT >          1 =TRUE              T_NEVER >          0 =FALSE
            C_IMPORT >          1 =TRUE              C_NEVER >          0 =FALSE
      BUFFERSNAPSHOT >          0 =FALSE
PUT:
            PUTSTEPS > *=<Lw(H3A)dG
            STARTSAP >
             STOPSAP >
           BUFFRESET >          1 =TRUE           BUFREFTIME >        180
             LOCK_EU >          1 =TRUE          MC_ENQ_STEP >          1 =TRUE
          GENERATION >          1 =TRUE     RESET_TIMESTAMPS >          0 =FALSE
      TATAF_TOLERANT >          0 =FALSE         RESET_DBPOS >          0 =FALSE
       NTACT_TIMECMP >          0 =FALSE
MVNTAB_LIST_FAILED >          1 =TRUE
Kernelmove:
          KERNELMOVE >          0 =FALSE            CLEANIPC >          0 =FALSE
             EXELIST >
             FROMDIR >
               TODIR >
      KERNELMOVEPATH >
        CLEANIPCPATH >
Clearold:
        DATALIFETIME >        200            OLDDATALIFETIME >        365
      COFILELIFETIME >        365                LOGLIFETIME >        200
Properties:
     SemaServer.Host : NULL
     SemaServer.Port : NULL
       tp.Semaphores : FILE
   tp.ConnectTimeout : 10000
tp finished with return code: 0
meaning:
Everything OK

SAP_APPL(SAPKH60012)-eroor during Import_Proper phase

Hello All,
I has an ECC 6.0 sytem and was applying SAPKH60012-SAPKH60013 together.
During the TEST-IMPORT i got the following error for both the support package
"R3TRMSAGME was repaired in this system".
I had ignored the error during TEST_IMPORT.
But now i am stuck with this in my IMPORT_PROPER phase.
Please suggest, I did not find any SAP Notes for this error.
Also the main error
Error in phase :IMPORT_PROPER
Reason of the ERROR:TP_STEP_FAILUER
Return Code: 0008
Error Message :OCS Package SAPKH60012 , tp step "I",return Code 0008
Also i found in the log this error
Start import LIMUDOCUNAME818
R3TRMSAGME was repaired in this system
LIMUDOCUNAME818
Regards
Anthony
Edited by: Anthony D'souza on Mar 6, 2009 11:11 PM

Hi,
For this error "R3TRMSAGME was repaired in this system". You need to reset the repair fag by using tcode se03.
Also this error "TP_STEP_FAILUER" says that tp failed. If you have upgraded kernel level before sp upgrade then check current tp's version. If you have not upgraed tp.exe then download latest tp.exe & put it in your kernel path & restart the sp upgrade.
Please check ksap note for known problem in Support packs for your SAP release
Also check below threads. It will help you
Re: spam error in IMPORT_PORPER
tp
Thanks,
Sushil

Error Patch IMPORT_PROPER phase

Dear support,
We were applying patches on Netweaver 2004s Oracle 10.2.0.2 Windows platform server. Basis patch 12 and it was successfull in Test mode , but during standard mode suddenly machine got restarted because of power problem.
Now database and SAP is up and running , but i am unable to proceed with any of transactions ( like SPAM ) as i get <b>syntax_error</b>. Patch is in IMPORT_PROPER phase so i cannot reset until i do some database work.
What i am just aware i need to check entries in PAT01 , PAT02 , PAT03 and TRBAT tables and delete entries from PAT01 there to reset the queue and run patch again.
I can login to database with user SAPSR3 and there are entries for Basis patch 12 in table PAT01.Can anyone tell me further actions and querry which need to be executed to delete entry in detail , as i am having one week old backup which is not usefull for me.Please let me know safest way out of this issue.
Please help me at earliest.
Best Regards,
AjitR

praveen ,
I havent deleted any entry from tables , please find below
SQL> select PATCH,STEPCOND,RET_CODE,MESSAGE from PAT01;
PATCH                                                        STE RET_CODE
MESSAGE
SAPKB70012                                                   ?
SQL> SELECT * FROM PAT02;
no rows selected
SQL> SELECT COUNT(*) FROM PAT03;
COUNT(*)
        33
SQL> SELECT COUNT(*) FROM PAT10;
COUNT(*)
         1
SQL> SELECT PATCH,STATUS,IMPL_MANDT from PAT10;
PATCH                                                        STA IMPL_MAND
SAPKB70012                                                   R   000
SQL> SELECT RETCODE,CLIENT,ARGUMENT FROM TRBAT;
RETCODE      CLIENT    ARGUMENT
F
logs are as below
Transport request ; SAPKB70012
SQL error 1089 accessing : ORA-01089 immediate shutdown in progress - no ope
Main import
Ended with Return code 12
could you throw some light on the same.

Support Pack General Question:- IMPORT_PROPER phase

Hi All,
Is there any command at OS level to complete IMPORT_PROPER phase of SPAM transaction (support pack import)?

Hi ,
Is there any command at OS level to complete IMPORT_PROPER phase of SPAM transaction (support pack import) in My QAS system............. ?
I tried the following command in my DEV & QAS System.but not solved.
C:\>tp cleanbuffer qas pf=myprofile.pfl
This is tp version 320.56.89 (release 620)
E-myprofile.pfl could not be opened.
EXIT
Error in myprofile.pfl: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)

Support Packages Installation Stops at IMPORT_PROPER Phase

Hi Sap stars,
                            I have started Installation of support packages for PI 7.1 Cluster Server , It got stuck at phase Import_Proper
                            and do not do anything , Then I executed the TP R3I .....COMMAND Which executed successfully
                            Then I executed the Command
                            tp showbuffer SID tag=spam pf=G:\usr\sap\trans
\bin\TP_DOMAIN_SID.PFL
This is tp version 375.33.68 (release 710, unicode enabled)
SID buffer:
SAPKB71007          |                    | |has already been imported completely
that makes 0 transports to be imported.
tp finished with return code: 0
meaning:
Everything OK
But still in SPAM it is showing the IMPORT_PROPER status in RED
Could anyone tell me how can this status get changed and Import other Support Packages
Thanks In Advance
Anil Kumar

Hi Raghu,
I have used the tp r3i command when I got stuck in Import_proper Phase It ended with TP retun code 008
2EETW109 TABLE "SQL_TOOL_GROUPT" does not exist in Nametab
When I try to run any Transaction Code it is throwing an Dump
OS-Windows, Database_Sqlserver 2005 Application-PI 7.1
Can u pls suggest me what can I do to sort this issue
Thanks In Advance
Anil

Support Package still running in Import_proper phase ( KB70017)

Dear all,
When i appling Basis Support Package ( KB70017) , still its running the import_proper phase and its running around 12 hours .
kindly suggest me to resolve the issue
Regards

Dear all ,
i applied Basis Patch it took long time and still its not complete so i restart the server .
now i cant able to login SAP its giving Syntax error kindly advise me
i found these are the logs in this directory usr\sap\trans\tmp logs
1 , UMODPROT.SID log
ETN080X*************************************************************************
1 E0U531 "Report RSUMODSP (modified objects)"
1 ETN252     Start date: "15.01.2010"
1 ETN253     Start time: "11:40:03"
1 ETN080 *************************************************************************
3 E0U531 "Analysis for OCS Package Queue:"
3 E0U531 "SAPKB70017"
3 E0U531X"Special handling of SORTTABS tables..."
3 E0U532X"Check objects of request" "SAPKB70017"
3 E0U531X"Update modification information..."
3 E0U531X"Summary:"
3 E0U531 "No modified SAP objects found"
1 ETN080X*************************************************************************
1 E0U531 "Report RSUMODSP (modified objects)"
1 ETN252     Start date: "15.01.2010"
1 ETN253     Start time: "11:53:07"
1 ETN080 *************************************************************************
3 E0U531 "Analysis for OCS Package Queue:"
3 E0U531 "SAPKB70017"
3 E0U531X"Special handling of SORTTABS tables..."
3 E0U532X"Check objects of request" "SAPKB70017"
3 E0U531X"Update modification information..."
3 E0U531X"Summary:"
3 E0U531 "No modified SAP objects found"
AMODPROT.SID log
1 E0U532 "Report RSUMOD10_SP" "(Classification of Modified Objects)"
1 ETN252     Start date: "15.01.2010"
1 ETN253     Start time: "11:54:57"
1 ETN080 *************************************************************************
3 E0U533X"Fetch objects to be adjusted" "(SPDD)" "from UMODOBJ..."
4 E0U533 "Fetch objects from request" "SAPKB70017" "..."
3 E0U532 "0" "objects to be adjusted were fetched"
CMODACT.SID log
ETN085X"OCS Package Queue Import:" "15.01.2010" "10:23:11" " "
1 ETN085 "(De)activate customer exits:" " " " " " "
1 ETN085X"OCS Package Queue Import:" "15.01.2010" "11:23:22" " "
1 ETN085 "(De)activate customer exits:" " " " " " "
IMODPROT.SID log
1 E0U532 "Report RSUMOD20_SP" "(Special Handling of IS Tables)"
1 ETN252     Start date: "15.01.2010"
1 ETN253     Start time: "09:45:14"
1 ETN080 *************************************************************************
Regards
1 ETN080X*************************************************************************
1 E0U532 "Report RSUMOD20_SP" "(Special Handling of IS Tables)"
1 ETN252     Start date: "15.01.2010"
1 ETN253     Start time: "11:08:39"
1 ETN080 *************************************************************************
1 ETN080X*************************************************************************
1 E0U532 "Report RSUMOD20_SP" "(Special Handling of IS Tables)"
1 ETN252     Start date: "15.01.2010"
1 ETN253     Start time: "11:54:58"
1 ETN080 *************************************************************************

How can i avoid phase delay in annalog input data acquisition of multi channels

    I am using a PCI-6251 M Series board and wish to acquire two analog signals and output one analog signal simultaneously. I have a question about multi-function -synch ai-ao.vi .With this Vi I work out annalog input of one channel and   data output of one channel synchronously.I take some change in the vi which I make the sampling rate and sampling number of input and output channel be equal. But when i increase the input channel from one to two,a problem come that is the data acquired always shift towards one direct which depends on the sampling rate(for example data shift turn left when 250kS/s,right when 200kS/s). Does the phenomena mean phase delay or lag during accquring data? or mean data loss? how it happen ?
   I wonder if the acquisition on both channels is perfectly simultaneous.I hope the start of data acquisition each time be the same all time.
          I would appriciate it if any comment and suggestion.
            Attachments: modified VI from the Multi-Function -synch ai-ao.vi
            I delete some part about data processing in while cycle.vi in additonal file

The specifications for the PCI-6251 state that it is not a simultaneous sampling board. This means that the board has one A/D converter which is multiplexed between channels. How much time delay is between channels is determined by how the board timing works, but it cannot be less than the reciprocal of the maximum sampling rate. For that board this is 1/1.25 MS/s or 800 ns. The delay could be as much as the reciprocal of your actual sampling rate. You need to look at the detailed specification for the device to determine the intersample delay. Some boards require addditional delay when switching channels to allow the multiplexer and amplifier to settle.
Perhaps you can sample at a rate that is high enough that the delays produce acceptably small phase shifts. If your signals a deterministic enough, you may be able to calculate the shift and compensate.
If you need true simultaneous sampling, you will need to check the specifications to be sure that the device you select offers that capability. I took a quick look at NI's web site DAQ search page and that is not a top level search option, but as you start to specify channels and sampling rates it becomse available.
Lynn

Phase Delay

hello board,
I am using USB 6212 for measurements,which effectively has a phase delay of 12.5us. Now I have checked the phase response for an analog voltage fed diretcly into two input channels, and what I am seeing is nearly zero phase differences (< 0.1mrad). I did not make any change to convert rate etc.
1) Now if the phase delay is 12.5 us, then wont the phase angle difference between the two channels increase with increasing signal frequency?
For example, at a signal of 1 kHz, the phase delay would be (12.5us *2*3.14*1000) = 0.078 rad.
I am not seeing these large delays.
Sampling rate is 2 kHz, and tone information for both input signals are extracted using single tone subVI.
(this is ideally what i want, the inter-channel delays do no manifest in me results, but theoretically the delay is 12.5us...)

First: try to capture more cycles, with higher samplerate for the tone detection (it works FFT based and is quite good with more than 10 periodes. there is a presentation about how good it is somewhere at NI.com).
Alternative is a linear MSE fit to Asin(wt)+Bcos(wt)+C search for SAM Sinus approximation method (it's not there as a vi, but not to hard to program)
A good test is to swap the input channels.
With only one signal source to both signals you can check the channel delay ... a 20kHz sine sampled @1M gave me an uncertaincy below 1nS (using tone detection.vi) , cross checked via Monte Carlo..(OK using a 5922 )
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

ATUALIZATION SPAM IN PHASE IMPORT_PROPER LONG RUNNING

Hi,
Help me
Atualization of SPAM (SAPKD0023) : Long running in phase main import.(IMPORT_PROPER)
Just warnings (4).
Windows Server 2003 enterprise Edition 4GB Ram Oracle 10.2.0.2

Hi ,
The problem was solved running the statistics of Oracle.

SPAM update struck in IMPORT_PROPER phase

Hello gurus,
we are importing SAPKB70030, SAPKB70030 and SAPKA70030 into our LEH. LEH is a HCM developer system running on zLinux with database DB2 on zOS.
The update is stuck at the "move nametab" on the table TTONFTVZZBEPP. This table is a lock, which can currently not be resolved.
Because it is an empty table, we would like to skip this action. There is a possibility?
Thank you for your efforts.
Regards
Hartmut Wagner

Matt,
After we unlock the tables, we were able to continue the SPAM. Thank you for the tip.
Regards,
Hartmut

Import support package SAPKB70015. Is stuck in IMPORT_PROPER phase

Dear Expert,
I have some problem when import support package SAPKB70015 at PI System.
IT had shown as below.
Main import
Transport request   : SAPKB70015
System              : CXI
tp path             : tp
Version and release: 372.04.08 700
sap_dext called with msgnr 4:
      db call info
function:   db_report_interface
fcode:      UPDATE_REPORT
tabname:    TEXT
len (char): 40
key:        /OSP/CL_CJS_CONTEXT===========CP
retcode:    4
Main import
End date and time : 20081120021353
Ended with return code: ===> 12 <===
And I checked the transport log,It shown as below.
4 ETW690 COMMIT "360444" "53156878"
3 ETW674Xstart import of "LIMUCLSD/OSP/CL_CJS_CONTEXT" ...
4 ETW000   1 entry for TADIR updated (R3TRCLAS/OSP/CL_CJS_CONTEXT                     ).
4 ETW000 REPOS /OSP/CL_CJS_CONTEXT===========CP         A replaced.
4 ETW000 [dev trc     ,00000] Thu Nov 20 02:13:53 2008                         39924798 39.924798
4 ETW000 [dbsloci.    ,00000] *** ERROR => Cannot update a LOB column for more than one row piecewise
4 ETW000                                                                              85 39.924883
4 ETW000 [dev trc     ,00000] sc_p=0x110f57d68,no=55,idc_p=0x110f70638,con=0,act=1,slen=125,smax=256,#vars=5,stmt=0x111e1f700,tabl
e=REPOTEXT
4 ETW000                                                                              66 39.924949
4 ETW000 [dev trc     ,00000] prep=0,lit=0,nsql=0,lobret=1,#exec=1,dbcnt=2,upsh_p=(nil),ocistmth_p=0x111e20098
4 ETW000                                                                              53 39.925002
4 ETW000 [dev trc     ,00000] IN : cols=4,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=1,upto=4294967295,rsize=84,vmax=32,bound=1,iobuf_p=0x111
0a4220,vda_p=0x111e21a60
4 ETW000                                                                              58 39.925060
4 ETW000 [dev trc     ,00000]       lobs=1,lmax=4,lpcnt=0,larr=0x111e22180,lcurr_p=(nil),rret=0
4 ETW000                                                                              48 39.925108
4 ETW000 [dev trc     ,00000] OUT: cols=1,rmax=0,xcnt=0,rpc=0,rowi=0,rtot=0,upto=0,rsize=0,vmax=32,bound=0,iobuf_p=(nil),vda_p=0x1
11e222c0
4 ETW000                                                                              55 39.925163
4 ETW000 [dev trc     ,00000]       lobs=1,lmax=4,lpcnt=0,larr=0x111e22220,lcurr_p=(nil),rret=2
4 ETW000                                                                              47 39.925210
4 ETW000 [dev trc     ,00000] UPDATE "REPOTEXT" SET "DATA" = :A0 WHERE "PROGNAME" = :A1 AND "R3STATE" = :A2 AND "LANGUAGE" = :A3
4 ETW000                                                                              51 39.925261
4 ETW000 [dev trc     ,00000] RETURNING "DATA" INTO :A4;                            29 39.925290
4 ETW000 [dbrepolo    ,00735] ***LOG BZY=>unexpected return code 2          calling            [dbrepolo#? @ 735]
4 ETW000                                                                              75 39.925365
2EETW000 sap_dext called with msgnr "4":
2EETW000 -
db call info -
2EETW000 function:   db_report_interface
2EETW000 fcode:      UPDATE_REPORT
2EETW000 tabname:    TEXT
2EETW000 len (char): 40
2EETW000 key:        /OSP/CL_CJS_CONTEXT===========CP
2EETW000 retcode:    4
1 ETP154 MAIN IMPORT
1 ETP110 end date and time   : "20081120021353"
1 ETP111 exit code           : "12"
1 ETP199 ######################################
System information
SAP = NW2004s SR3
Database          = Oracle 10.2.0.2
OS versions      = AIX 5.3
Tp version = 700 Unicode 179
R3trans version = 700 Unicode 183
PS.I checked tp connect return code 0 and R3trans u2013s return code 0
Could you please suggest how to fix this problem?
Thank you very much
Jaturong

Hello Karthik
I know the list is long. Unfortunately I have never had such a long list of inactive objects in the system during an update or upgrade. But I believe you can make use of the mass activation program RADMASG0 to have them activated. The other option I can think of is to use the function module RS_INACTIVE_OBJECTS_LIST to list all the inactive objects and see whether they can be mass activated from there. I believe it is possible to activate all from there after selecting a block. (Never tried so I cannot guarantee).
Regards
RB

Error in phase IMPORT_PROPER TP_BUFFER_INCONSISTENCY return code 8

Hi,
When applying add on programs ST-PI version 2008-1-700 (SAPKITLRDA) with transaction SAINT the TP_BUFFER_INCONSISTENCY error occured during the IMPORT_PROPER phase.
Error message: Pkgs. in queue don"t exist in the tp buffer (e.g. SAPKITLRDA)
It is not possible anymore to reverse the job as the data has already been loaded into the database. I checked the various messages in OSS and internet but could not find a solution for this problem. I only found an indication which could help solve the problem but I see that as a rigorous one.
That one is:
In our case it was due to probelm in transport buffer.I manually resetthe buffer using the following steps,
In Se37,Use the function module OCS_RESET_QUEUE -> Single Test
with the parameters
IV_TOOL&H3DSAINT, IV_FORCE&H3DX
Deleted all the files from \usr\sap\trans\tmp.Please make sure thatthere is no TP process
or R3trans process running in the system at Operating system level.
If any process exist, Please kill the process.
Scheduled the program RDDIMPDP using Report RDDNEWPP in se38.
Then restarted the import again and the problem was solved.
Before I want to do to carry out above action I would like to get guidance and advice if this problem would help solve my problem.
My release information is:
SAP ECC 6.0 - MSSQL Windows XP
Kernel 700 patch level 114
I am using the latest version of the SPAM/SAINT tool (version 34).
Thanks
Toon

I contacted SAP marketplace at the same moment I created this message and that really worked.
Thanks to the diligent SAP support I was able to complete the import of the support package.
This also means and that was confirmed by SAP that the usage of function module: OCS_RESET_QUEUE was not the solution of the problem. Basically it means that you need to contact SAP for help in those kind of situations.
Thanks Uday for your response!

SPAM IMPORT_PROPER Phase delay

Similar Messages

Maybe you are looking for