SPAM-Patch (SAPKB70014) is hanging in phase Import_Proper
Hi experts!
I have problems to patch the SAP-Basis component (SAPKB70014) for SAP ERP 2005.
The problem is that the patch is hanging in the phase Import_Proper.
I read suitable SAP Note 822379 and changed the kernel to Patch 133 or 146, but it does not help.
The system is installed via heterogeneous system copy.
I have also other problems, e.g. Dump u201CITAB_DUPLICATE_KEYu201D by accessing into the tcodes DB13, DBACOCKPIT.
Enclosed the last lines of the log file ULOG08_2
Any helpful information is very appreciated and will be awarded with points.
APServiceVHT 20080526133153 RFC: tp IMPORT all VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dmainimp_proc=1 -Ddictimp_proc=1 -Dbatch_proc=1 -Dstopimmediately=1 -Dactivatemerged=yes -Dcheckmasterlang=no tag=spam -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526133221 RFC: tp COUNT AUS pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526133221 RFC: tp COUNT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526133224 RFC: tp COUNT AUS pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526133224 RFC: tp COUNT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526133246 RFC: tp COUNT AUS pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526133246 RFC: tp COUNT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526133248 RFC: tp COUNT AUS pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526133248 RFC: tp COUNT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526151612 RFC: tp SHOWPARAMS VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526151612 RFC: tp CONNECT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526151614 RFC: tp IMPORT all VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dmainimp_proc=1 -Ddictimp_proc=1 -Dbatch_proc=1 -Dstopimmediately=1 -Dactivatemerged=yes -Dcheckmasterlang=no tag=spam -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526151807 RFC: tp COUNT AUS pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526151807 RFC: tp COUNT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526161807 RFC: tp SHOWPARAMS VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526161807 RFC: tp CONNECT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526161810 RFC: tp IMPORT all VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dmainimp_proc=1 -Ddictimp_proc=1 -Dbatch_proc=1 -Dstopimmediately=1 -Dactivatemerged=yes -Dcheckmasterlang=no tag=spam -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526165518 RFC: tp SHOWPARAMS VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526165518 RFC: tp CONNECT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526165520 RFC: tp IMPORT all VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dmainimp_proc=1 -Ddictimp_proc=1 -Dbatch_proc=1 -Dstopimmediately=1 -Dactivatemerged=yes -Dcheckmasterlang=no tag=spam -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526165743 RFC: tp SHOWPARAMS VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526165743 RFC: tp CONNECT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526165744 RFC: tp SHOWPARAMS VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526165744 RFC: tp CONNECT VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dtransdir=
vzhl9000\sapmnt\trans
APServiceVHT 20080526165744 RFC: tp IMPORT all VHT pf=
vzhl9000\sapmnt\trans\bin\TP_DOMAIN_VHT.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dmainimp_proc=1 -Ddictimp_proc=1 -Dbatch_proc=1 -Dstopimmediately=1 -Dactivatemerged=yes -Dcheckmasterlang=no tag=spam -Dtransdir=
vzhl9000\sapmnt\trans
Regards
Thom
Hi,
I have similiar problem with patching SPS from 9 to 14 level on NetWeaver2004s.
One background process is working second day, but it has status - STOP.
When I'm logging into system a have "Status 0020 of the user interface SAPMSYST missing" message.
Thom did you resolve your problem?
Regards
Michal Sarna
Similar Messages
-
Spam is hanging in phase IMPORT_PROPER
Hi!
I am facing with hanging SPAM error in phase IMPORT_PROPER (patch of SAPKB70013 - SAPKB70016).
The SPAM patch terminates after a few sec. in DDIC activation action.
I have looked into log file and founded folllowing:
The job RDDEXECL terminated with error.
The reason seems to be sysntax error in program "CL_PROXY_SERVICE=======CP".
Futhermore I could detect that table SI_WD_FIRST_MAIN_SCREEN cannot be activated.
Can some one help me to solve this problem?
Of great interest was the following:
rescedule possibilities of job RDDEEXECL in order to contibue patch
start of SPAM or tp-commando by ignoring this error
Thank you very much!
ThomMoved to NW Admin...
-
Patch in phase IMPORT_PROPER is hanging
Hi!
I am facing with the following errors after the system copy of SAP ERP 2005 on Windows migrated from MS SQL to SAP DB.
The SAP_BASIS-Patch (SAPKB70014) in the phase u201CIMPORT_PROPERu201D (Step: DD Activation)
is hanging.
I have checked the RFC-connections like TMSADM(at)VHT.DOMAIN_VHT
and have detected (via u201Cconnection testu201D) that
the responsible time of data transport is very long.
Could it be the reason for the problem above?
If Yes, how can this be solved?
Thank you very much
regards
ThomHI there,
Regarding support pack, please check import logs for any errors and return codes >4. Also, check the action log to see if all phases have completed successfully so far.
And regarding RFC, the connection test is successfull, right?
regards, Sean. -
SPAM is hangs XPRA_EXECUTION Phase
Hi Gurus,
I have stucked in XPRA_EXECUTION phase. The TP
ended with return code 0008 while implementing the sapkb70012 patch for SAP_BASIS in ECC system.
SPAM is hangs XPRA_EXECUTION Phase.I see in status of Support Package :The import was stopped, since an error occurred.
Error in phase - XPRA_EXECUTION
Reason for error - TP_STEP_FAILURE
Return code - 0008
Error message - OCS package SAPKB70012, tp step R, return code 0008.
Could please Advise the Solution for the issue.
Appretiate you help.
Thanks
AnilsHi
See below is the log for error code 0008 in SAPRB70012.
3 EPU182 Post-processing for &2"ACGR" &3"SAP_XI_BPE_ADMINISTRATOR_ABAP" was already performed successfully earlier&1"R3TR"
3 EPU182 Post-processing for &2"ACGR" &3"SAP_XI_BPE_CONFIGURATOR_ABAP" was already performed successfully earlier&1"R3TR"
3 EPU182 Post-processing for &2"ACGR" &3"SAP_XI_BPE_MONITOR_ABAP" was already performed successfully earlier&1"R3TR"
3 EPU182 Post-processing for &2"ACGR" &3"SAP_XI_BPE_SERV_USER" was already performed successfully earlier&1"R3TR"
3 EPU182 Post-processing for &2"ACGR" &3"SAP_XI_BPE_SERV_USER_MAIN" was already performed successfully earlier&1"R3TR"
3 EPU123 Post-import method "PRGN_AFTER_IMP_ACTGROUP_ACGR" completed for "ACGR" "L", date and time: "20080206084243"
2 EPU122XPost-import method "RH_ACTIVATE_PDOBJECT_AFTER_IMP" started for "PDST_BASE" "T", date and time: "20080206084243"
3 EPU182 Post-processing for &2"TDAT" &3"PDST_BASE" was already performed successfully earlier&1"R3TR"
3 EPU123 Post-import method "RH_ACTIVATE_PDOBJECT_AFTER_IMP" completed for "PDST_BASE" "T", date and time: "20080206084243"
2 EPU122XPost-import method "SRT_REG_AFTER_IMPORT" started for "SRTD" "L", date and time: "20080206084243"
3 EPU182 Post-processing for &2"SRTD" &3"8A0A000A416FA34EBD449DF66C50649B" was already performed successfully earlier&1"R3TR"
3 EPU123 Post-import method "SRT_REG_AFTER_IMPORT" completed for "SRTD" "L", date and time: "20080206084243"
2 EPU122XPost-import method "SUSR_AFTER_IMP_PROFILE" started for "SUSPR" "T", date and time: "20080206084244"
3 EPU182 Post-processing for &2"TDAT" &3"SUSPR" was already performed successfully earlier&1"R3TR"
3 EPU123 Post-import method "SUSR_AFTER_IMP_PROFILE" completed for "SUSPR" "T", date and time: "20080206084244"
2 EPU127 Post-import methods of change/transport request "SAPKB70012" completed
2 EPU128 Start of subsequent processing ... "20080206084214"
2 EPU129 End of subsequent processing... "20080206084244"
2 EPU110XExecute reports for change/transport request: "SAPKB70012"
4 EPU111 on the application server: "DRIECCDEV"
3 ETP000
3 ETP000 **************************************************
3 ETP000
2 EPU117 Reports for change/transport request "SAPKB70012" have been executed
2 EPU118 Start of................ "20080206084244"
2 EPU119 End of.................. "20080206084244"
1 ETP162 EXECUTION OF REPORTS AFTER PUT
1 ETP110 end date and time : "20080206084244"
1 ETP111 exit code : "8"
1 ETP199 ######################################
Regards
Anilsai -
Error occurred during the phase IMPORT_PROPER
Hi All,
We are currently installing Add-on ST-PI Rel.2008_1_620 SAPKITLRBA, and the corresponding 3 support packages SAPKITLRB1 to SAPKITLRB3, in one of the quality systems. However, an error is encountered during the installation which is as follows:
The installation was stopped, since an error occurred during the phase
IMPORT_PROPER, which the Add-On Installation Tool is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
- Error in phase: IMPORT_PROPER
- Reason for error: TP_BUFFER_INCONSISTENCY
- Return code: 0008
- Error message: Pkgs. in queue don"t exist in the tp buffer (e.g.
SAPKITLRBA)
Also, below is the SLOG of the system:
ERROR SAPKITLRBA ST6 I 0016 20110602203832 STPIUSER INUP
cpafisr5 20110602203531
STOP MAIN IMPORT ST6 I 20110602203833 INUP
cpafisr5 20110602203531
ERROR: stopping on error 16 during MAIN IMPORT
STOP imp all ST6 0016 20110602203833 INUP
cpafisr5 20110602203531
START MAIN IMPORT ST6 I 20110602203943 INUP
cpafisr5 20110602203943
START TRANSMIT BUFFER ENTR ST6 g 20110602204020 INUP
cpafist0
STOP TRANSMIT BUFFER ENTR ST6 g 0000 20110602204020 INUP
cpafist0
START COMMIT BUFFER ENTRIE ST6 g 20110602204020 INUP
cpafisk0
HALT 20110602204020
ERROR: tpsettainfo: Cofile /usr/sap/trans/cofiles/KMARK.SYN does not
exist!
ERROR: EXIT(16) -> process ID is: 10932
WARNING: TA SAPKITLRB1 not found via index, reading whole buffer
The same add-on and support packages we successfully installed in its respective developement system and in other systems as well. However, request you all to kindly assist in resolving the error.
Thanks in advance.
Regards,
Indraneel UpponiERROR: tpsettainfo: Cofile /usr/sap/trans/cofiles/KMARK.SYN does not exist!
Does this file exist on this location ? It seems buffer insoncistency from the error message.
Regards,
Subhash -
Long time for phase IMPORT_PROPER - install. BI_CONT
Hello,
I try to install Add-on BI_CONT Rel.703. But in transaction saint,
BI_CONT is locked for three days on phase IMPORT_PROPER.
Is it normal that takes a long time ?
What can I do ?
Thanks
Best regards,
Message was edited by:
Aurélien HENRYHello,
I have this log :
WARNING: Background job RDDIMPDP could not be started or terminated abnormally.
Please check that the R/3 system is running.
Please check the system. Use transactions SM21, SM37, SM50.
WARNING: (This warning is harmless if no further warnings follow.)
Thanks for help
Best regards, -
Hello All
I want to know what is my current SPAM patch level
can any one tell me the path to see the current SAPM patch level in system
my sap ECC6.0,SQL2005,win2003 server
thanks in advanceHi,
You can check patch levels from system ---> status
it will open another window in that you can find PATCH level...
OR
You can execute a transaction SPAM and then look for applied patches...
For new patches you need to visit service.sap.com or transaction code OSS1.
Thanks,
Nitesh Jain -
ATUALIZATION SPAM IN PHASE IMPORT_PROPER LONG RUNNING
Hi,
Help me
Atualization of SPAM (SAPKD0023) : Long running in phase main import.(IMPORT_PROPER)
Just warnings (4).
Windows Server 2003 enterprise Edition 4GB Ram Oracle 10.2.0.2Hi ,
The problem was solved running the statistics of Oracle. -
Error in phase IMPORT_PROPER TP_BUFFER_INCONSISTENCY return code 8
Hi,
When applying add on programs ST-PI version 2008-1-700 (SAPKITLRDA) with transaction SAINT the TP_BUFFER_INCONSISTENCY error occured during the IMPORT_PROPER phase.
Error message: Pkgs. in queue don"t exist in the tp buffer (e.g. SAPKITLRDA)
It is not possible anymore to reverse the job as the data has already been loaded into the database. I checked the various messages in OSS and internet but could not find a solution for this problem. I only found an indication which could help solve the problem but I see that as a rigorous one.
That one is:
In our case it was due to probelm in transport buffer.I manually resetthe buffer using the following steps,
In Se37,Use the function module OCS_RESET_QUEUE -> Single Test
with the parameters
IV_TOOL&H3DSAINT, IV_FORCE&H3DX
Deleted all the files from \usr\sap\trans\tmp.Please make sure thatthere is no TP process
or R3trans process running in the system at Operating system level.
If any process exist, Please kill the process.
Scheduled the program RDDIMPDP using Report RDDNEWPP in se38.
Then restarted the import again and the problem was solved.
Before I want to do to carry out above action I would like to get guidance and advice if this problem would help solve my problem.
My release information is:
SAP ECC 6.0 - MSSQL Windows XP
Kernel 700 patch level 114
I am using the latest version of the SPAM/SAINT tool (version 34).
Thanks
ToonI contacted SAP marketplace at the same moment I created this message and that really worked.
Thanks to the diligent SAP support I was able to complete the import of the support package.
This also means and that was confirmed by SAP that the usage of function module: OCS_RESET_QUEUE was not the solution of the problem. Basically it means that you need to contact SAP for help in those kind of situations.
Thanks Uday for your response! -
Error in the phase IMPORT_PROPER while applying support packages
Dear All,
I am on ECC 6.0(ABAP+JAVA) SR2, SUSE Linux 10 SP1, DB2.
I have successfully applied the kernel patch and started applying the support packages, i have successfully completed applying the ABAP, Basis, BW, HR and other related patches, but i am not sure why i am stuck at the import_proper phase when applying the SAP_APPL patches (SAPKH60008 and SAPKH60009 both in the same queue) and my tp log is as follows
========================================================================================================
START imp all SCD 20081229080538 DDIC sealcpro 20081229080537
INFO: event SAP_IMPORT_START triggered successfully
INFO TBATG CONVERSION OF SCD N not needed DDIC sealcpro 20081229080537
START tp_getprots SCD P 20081229080539 DDIC sealcpro 20081229080537
2EETP000 sap_dext called with msgnr "1":
2EETP000 db call info
2EETP000 function: db_setget
2EETP000 fcode: RT_SETB (65535)
2EETP000 tabname: TRBAT
2EETP000 len (char): 0
2EETP000 key:
2EETP000 retcode: 1
1AETP000 exit in function texitnow
ERROR: EXIT(16) -> process ID is: 5319
STOP imp all SCD 0016 20081229080602 DDIC sealcpro 20081229080537
=========================================================================================================
And also when i look at the Support package import logs they show that
TEST IMPORT
Import ABAP Dictionary Objects and
ABAP Dictionary Activation phases ended with return code 4
But i dont think this can give any problem.
I have tried to import from the phase where it stopped, but all of a sudden i get disconnected from SAP and get an error message saying that NO CONNECTION TO THE DATABASE, then when i check for the processes for dw and db2 there are process already running.
I had to start SAP and only then i was able to connect to the SERVER again.
Can you please help me on this..
For any more information plz let me know
Thanks and regards
HunkyDear Balaji,
Thank you very much for the reply...
I deleted the import request in the STMS and wi ran the RDDIMPDP and RDDMNTAB reports and restart the SPAM, but this time the SPAM immediately stopped, but i am still connected to the system and the error which i got earlier (database connection error ) is now not occuring.
But otherwise also i noticed that i get the following ABAP Dump while this error is triggering
===================================================================
DBIF_REPO_INTERNAL_ERROR
Internal error when accessing program "CX_SY_OPEN_SQL_DB=============CP ".
An unspecified internal error occurred in the SAP-internal
database interface.
For further analysis the SAP system log should be examined
(transaction SM21).
Check the entries in the developer trace of the relevant work process
(transaction ST11).
Attempted to access component "LOAD" of program
"CX_SY_OPEN_SQL_DB=============CP ".
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_REPO_INTERNAL_ERROR" " "
"SAPLSTPA" or " "
==========================================================================
Based on this error i searched few notes and got the below results 309583 and 132383 but these are not for my release.
So i request you to kindly help me on this as i am running out of time in delivering my server.
Waiting for all the valuble replies
Thank you in advance
Regards
Hunky -
Error while upgrading Patch SAPKB70014- Error R3trans received signal 11
Dear All
while updating my basis patch level to sapkb70014 I m facing the error at DDIC import phase related to R3trans recived signal 11.My tp version is accurate as required . Kernel versin is 238 Can you guys help me to solve the same
Regards
ShilpaHi
Please continue to run the SPAM again. Also check the Note 822379. If the problem didnt solve yet, post complete log.
Regards,
Rajan -
Dear All
I am in the process of installing Patch 3480000 (11.5.10.2) and now all workers displayed in "Running" status with command "adctrl" but Windows task manager doesn't display any activity running so now all patch is hanging
and the screen output for the patch is:
Writing dependencies of jobs to run to appldep.txt file...
There are now 95392 jobs remaining (current phase=A0):
0 running, 139 ready to run and 95253 waiting.
Reading completed jobs from restart file (if any).
There are now 49650 jobs remaining (current phase=A55):
0 running, 5686 ready to run and 43964 waiting.
FYI the job which should be run now is "adtasktim.sql"
Please advise how I can doThanks
After two shutdown ans start for application,database and Windows then patch running
BR
Tarek -
SPAM/SAINT Update stuck on Import phase Epilogue
Under status it shows that SPAM/SAINT update is being processed and SPAM status shows red light.
Import phase is EPILOGUE.
I got out of the SPAM and restarted it, it shows the updated SPAM version but status is still red light.
I am updating to version 6.20/30 from 29
Any idea or suggestionHello Bill
Do you see any processes running in SM50?
Try to come out from SPAM and go again in SPAM and check.
regards,
Payal -
Reg : SPAM patches updation
Dear Friends,
Warm Greetings,
Any precautions are there in SPAM and Components updations. Pls let us know details about patches updation.
My server is MS SQL Server 2005
windows 2003 server
ECC 6.00
Currently my server SP STACK level is 12
My server running some background jobs.
RSCOLLl00, RDDIMDP and some etc background jobs.
If we want stop the any background jobs.
Regards
kesavan. ADear Rohith,
No Need to cancel the background jobs, is it right rohit. Then any other precautions are there.
I saw below component patches staus in SPAM --> All support patches
Some component patches imports status is cancel .
FI-CA - SAPKA-60012INFICA - Cancel
some component patches import staus is not imported
FINBASIS - SAPK-60013INFINBASIS not imported
EA - PS - SAPKGPPD12 Not imported
EA - GLTRADE - SAPKGPGD13 Not imported
EA - FINSERV - SAPKGPFD13 Not Imported
EA - DFPS - SAPKGPDD12 Not imported
EA - APPL - SAPKGPAD13 Not imported
SEM - BW - SAPKGS6013 Not imported
IS - H Health care - SAPK-60011INISH Not imported
SAPK-60011INISH Not Imported
what can i do rohith
Regards
kesav -
Error in phase import_proper with error reason TP_STEP_FAILURE
Hi, I need to install Enhancement Package 3 for ECC 6 and it show me the problem as below:
Anyone has an idea of it? Thanks
"Invalid operation CNV for GLSP (object type:SQLT)"
*********SLOG************
INFO: event SAP_IMPORT_START triggered successfully
START DD IMPORT EC6 H 20080623133109 EC6ADM nbg-ws-ecc6 20080623133109
STOP DD IMPORT EC6 H 20080623133109 EC6ADM nbg-ws-ecc6 20080623133109
START TBATG CONVERSION OF EC6 N 20080623133110 EC6ADM nbg-ws-ecc6 20080623133109
START tp_getprots EC6 N 20080623133110 EC6ADM nbg-ws-ecc6 20080623133109
ERROR ALL EC6 N 0008 20080623133111 EC6ADM nbg-ws-ecc6 20080623133109
STOP tp_getprots EC6 N 20080623133113 EC6ADM nbg-ws-ecc6 20080623133109
STOP TBATG CONVERSION OF EC6 N 20080623133113 EC6ADM nbg-ws-ecc6 20080623133109
ERROR: stopping on error 8 during TBATG CONVERSION OF DD-OBJECTS
STOP imp all EC6 0008 20080623133113 EC6ADM nbg-ws-ecc6 20080623133109
***************NLOG**************
1 ETP166 CONVERSION OF DD OBJECTS (TBATG)
1 ETP101 transport order : "ALL"
1 ETP102 system : "EC6"
1 ETP108 tp path : "tp"
1 ETP109 version and release : "372.04.10" "700"
1 ETP198
1 ED0317XProgram start============================================================
1 ED0314
1 ED0314 DD: Execution of Database Operations
1 ED0314
1 ED0302 =========================================================================
1 ED0327 Process..................: "nbg-ws-ecc6_13"
1 ED0303 User.....................: "DDIC"
1 ED0305 Date, time...............: "23.06.2008", "13:31:11"
1 ED0307 Platform.................: "CUSTOMER"-"EC6"("700")/"ADABASD/WindowsNT/nbg-ws-ecc6"
1 ED0311 Tool.....................: "BATCH"/"RADBAT01"
1 ED0315 Log......................: "F", "
nbg-ws-ecc6\sapmnt\trans\tmp\N080623.EC6"
1 ED0314
1 ED0316 Program parameters:
1 ED0314 Process cat..............: parallel
1 ED0302 =========================================================================
1 ED0320XStart phase "001" **********************************************************
1 ED0306 "Preprocessing of TBATG"
1 ED0301 *************************************************************************
1 ED0301X*************************************************************************
1 ED0306 "Preprocessing of TBATG"
1 ED0322 End phase "001" ***********************************************************
1 ED0320XStart phase "002" **********************************************************
1 ED0306 "Partitioning"
1 ED0301 *************************************************************************
1 EGT014XNumber of objects: "2", partition: "2"
1 ED0301X*************************************************************************
1 ED0306 "Partitioning"
1 ED0322 End phase "002" ***********************************************************
1 ED0327XProcess..................: "nbg-ws-ecc6_13"
2 EGT054XRequest: Convert "SQL table GLSP (DDIC/23.06.08/13:31)"
2EEGT131 Invalid operation "CNV" for "GLSP" (object type:"SQLT")
1 ED0327XProcess..................: "nbg-ws-ecc6_13"
2 EGT054XRequest: Convert "SQL table GLTP (DDIC/23.06.08/13:31)"
2EEGT131 Invalid operation "CNV" for "GLTP" (object type:"SQLT")
1 ED0302X=========================================================================
1 ED0314 DD: Execution of Database Operations
1 ED0302 =========================================================================
1 ED0327 Process..................: "nbg-ws-ecc6_13"
1 ED0319 Return code..............: "0"
1 ED0314 Phase 001................: < 1 sec. (Preprocessing of TBATG)
1 ED0314 Phase 002................: < 1 sec. (Partitioning)
1 ED0309 Program runtime..........: "< 1 sec."
1 ED0305 Date, time...............: "23.06.2008", "13:31:11"
1 ED0318 Program end==============================================================
1 ETP166 CONVERSION OF DD OBJECTS (TBATG)
1 ETP110 end date and time : "20080623133111"
1 ETP111 exit code : "8"
1 ETP199 ######################################Refer to note 686357 and repair the table pools like mentioned in the solution there.
According to the import log the system decided that theses pool tables
GLSP, GLTP had to be converted because it found a difference between the table definition being imported and that that existed in the system.
Because conversion of tablesu2019 pools is not possible in general, these 2 tables were marked with status error in the control table TBATG. Any subsequent restart of the import now fails because there are TBATG entries in status error.
So when GLTP and GLSP are consistent after running RATPONTC (DDIC, NAMETAB and DB level)you can remove the entries for GLTP and GLSP from table TBATG and the import should proceed now.
Maybe you are looking for
-
Suddenly, after using ipod mini for a year, I'm getting the message 'songs on the ipod kennyz ipod cannot be updated because all of the playlists selected for updating no longer exist.' yet i swear to god I've done nothing out of the ordinary!!!
-
Need Color to generate XML linking to graded shots.
Hi I have a project which I left rendering overnight. Alas we had a powercut so the the project didn't finish. Although the first 120 shots were rendered ok, Color doesn't think they have been rendered so when I Send to FCP or export an XML, the resu
-
More questions about bitrate...
Sorry that this is posted twice. It occured to me that it would be better to post it as a separate question since the previous is now marked solved... Anyway: Hi there Jim. just wanted to say that your suggestons worked. Many thanks. However, I am st
-
ADF Taskflow : Progrmmatically finding TaskFlow ID
Hello Friends, Can we find, what is the Taskflow id programmatically .... what i am doing is : RichPanelGroupLayout pg = (RichPanelGroupLayout)button1.getParent(); List<UIComponent> children = pg.getChildren(); since i have now all children of the pa
-
Strange white rectangle on the desktop
Only just started doing this, but when Bridge is running, there's a white rectangle on the desktop, which goes away when Bridge (CS3) is quit. This happening to anyone else??