SPAM Quarantine and Local Quarantine

Hi All,
In my C670 I have enabled Enable Anti-Spam Scanning.
For positively - Identified Spam Setting: I have choosen Action as SPAM QUARANTINE
FOr Suspected SPAM Scanning: Spam Quarantine
Now even though the above is done, I could see the email still goes to the Content Filter checks where in I have enabled the Local Quarantine.
Does the emails are getting stored at both SPAM and LOCAL quarantine. This is done because I could see that Ceratin text has been added by the Iron port in the subject line while it identifies the spam and suspected spam and in the content filter we have a filetr monitoring the subject line.
My question is why does an email which has been span quarantine still have to go for content filter check, unless an administrator defines so.
Thanks

please help. is it possible that if an email is already quarantined by spam engine then it wont go for filter check

Similar Messages

Size of C350 Local Quarantine Folder

Dear All,
I'm running 2x C350 as HA. And I have some questions regarding the size of C350 local quarantine folder.
For example, my 1st appliance has total space of 3G, excludes IronPort Spam Quarantine (default 15G). Where my 2nd applicance can only create local folders up to total 2.8G, excludes IronPort Spam Quarantine (default 15G).
My questions:
1) Why there is a difference of space allocated for creating local folders?
2) What is the default space allocated for creating local folders?
Any feedback is very much appreciated. :D
Thanks,
ezekiel

Can you type this on the command line of your appliances:
server> quarantineconfig
Currently configured quarantines:
# Quarantine Name Size (MB) % full Messages Retention Action
1 Outbreak 1,024 empty 0 1d Release
2 Policy 512 0.0 2 10d Delete
3 Virus 512 empty 0 30d Delete
0 MB available for quarantine allocation.
Let me know what you see.
Dear All,
I'm running 2x C350 as HA. And I have some questions regarding the size of C350 local quarantine folder.
For example, my 1st appliance has total space of 3G, excludes IronPort Spam Quarantine (default 15G). Where my 2nd applicance can only create local folders up to total 2.8G, excludes IronPort Spam Quarantine (default 15G).
My questions:
1) Why there is a difference of space allocated for creating local folders?
2) What is the default space allocated for creating local folders?
Any feedback is very much appreciated. :D
Thanks,
ezekiel

BT Net Protect Plus Problem: Quarantined and Trust...

Hi,
             Can anyone help with following questions ?
The Navigation TAB in BT NetProtect Plus provides access to:-
Quarantined and Trusted Items
"Lets you review and handle items that either you or McAfee has quarantine or trusted"
Clicking on this tab takes user to
Quarantined Items, Quarantined Potentially Unwanted Items and Trusted Items
The McAffee virus checker is not infallible and can erroveously quarantine software and thus make this unusable to user unless following actions are carried out
1. RESTORE and remove/ deactivate virus checking software (little value if system requrus checker!!!)
2. Send to McAfee (BT Tech support cannot telll me when I will get answer)     (Problem logged)
3.   User moves items into Trusted items area.
       BT Tech support could not explain how to move items into Trusted Items location.
         More annoyingly BT Tech support refused to understand the phrase shown in software :-
       "you chose to trust them during a scan"
       Atdditionally "BT Tech support" did not accept that there was a BUG in software when they also could not demonstrate moving "apparently offending software" into Trusted Items location using remote access
            A screenshot is shown below:-
ducky

Sounds like another McAfee problem which will probably right itself in due course. But why persist with an antivirus program that's an unreliable resource hog, now so poor that even its originator John McAfee has disowned it? There are several superior, free choices out there, eg Microsoft Security Essentials, Avira, AVG.
If you opt for an alternative make sure to uninstall McAfee fully, including the removal tool.
You can click the white star next to this message if you think it was helpful.

Remote and local interface on same ejb 3.0 bean instance

Hi,
Is it posible to get remote and local interface on same ejb 3.0 bean instance.
For example get local interface of a bean and than pass it as remote to client.
Both interfaces must operate on same bean instance.
Thanks
Zlaja

yes. You can implement multiple interfaces on a single class, so you can add a local and a remote interface. One trick to avoid duplicate code is to simply make the remote interface extend the local interface; then you only have to add the @Remote annotation and you're done.
For example get local interface of a bean and than pass it as remote to client.You don't pass an instances to a client, a client looks up a remote instance of the bean through JNDI.

Remote and local databases

let say that i access a oracle form through the web and that form access data from two distributed databases, then will there be a remote database and local database for the user or all the databases will be remote databases to the user

In my opinion.
using local databases -- access tables without DB_link
using Remote databases -- access tables through DB_link

Remote and Local Site Sync Problems

I have a customer who is using Dreamweaver CS4 on Mac OS X. Dreamweaver is setup to have a local site as our development server(win 2k3) and the remote site as our live web server(win 2k3). The folder structure on both the development and live web server is the same. When you view the path in the manage site window of dreamweaver it shows both remote and local site listed as /Volumes/www/Data. When dreamweaver connects to both of these to sync the files nothing happens since it sees them as the same place.
I have looked in the /Volumes folder on the customers computer and two listings appear for the servers www and www-1. This is not what dreamweaver shows and if you repoint the link to the www-1 folder it just changes back to www.
I have tried to create alias' and symbolic links to distinguish one folder from the other however nothing I seem to change has any effect.
If you use finder on the machine it can distinguish between the two folders I just need to figure out how to make dreamweaver do the same.
Any assistance on this would be greatly appreciated.

Unfortunately no I do not have a solution. I was not able to find out at the time and the problem went away with the migration to a content management system for our web server. Also the Develpment team changed hands and the new people all use windows machines.
Good Luck trying to find a solution.

Performance with globle variable and local var.

hi anyone
i just have one performance question about the globle var and local. is having a globle var that is initialized with 'new' at one place better than having local var that is initialzed with 'new' in several places? for example, i have a access var that is initialzed with DB connection. should i have it as a globle var? or put it in the functions where it is needed, and initialize it with DB connection? in both cases, i need to use new operator.
thanks in advance.

First , don't use the term "global variable". It is misleading and not an official part of the Java nomenclature. I think the term used should be ( and correct me if I'm wrong ) instance variable. In C and C++ globale variables really are global - they can be accessed by any and all classes which include the header file.
OK, having got that out of my system, back to the question. The value is gotten from a database, right? Whether you make it an instance variable or not depends on you design and whether the value in the database is likely to change during the lifetime of the instance.
For example, if this class is a superclass of another, and the cild needs to know the value of the variable, it is often convenient to make it an instance variable so the subclass can access it directly.
But if the value is likely to change, then you may want to have a getter method which returns the current value in the database.
The latter will clearly have more overhead associated with it since you would need to get the value each time, but it is probably safer than having an instance variable.

How to change value of instance variable and local variable at run time?

As we can change value at run time using debug mode of Eclipse. I want to do this by using a standalone prgram from where I can change the value of a variable at runtime.
Suppose I have a class, say employee like -
class employee {
public String name;
employee(String name){
this.name = name;
public int showSalary(){
int salary = 10000;
return salary;
public String showName()
return name;
i want to change the value of instance variable "name" and local variable "salary" from a stand alone program?
My standalone program will not use employee class; i mean not creating any instance or extending it. This is being used by any other calss in project.
Can someone tell me how to change these value?
Please help
Regards,
Sujeet Sharma

This is the tutorial You should interest in. According to 'name' field of the class, it's value can be change with reflection. I'm not sure if local variable ('salary') can be changed - rather not.

Transparent Tunneling and Local Lan Access via VPN Client

Remote users using Cisco VPN 4.2 connect successfully to a Cisco Pix 515 (ver. 6.3). The client is configured to allow Transparent Tunneling and Local Lan access, but once connected to the Pix, these two options are disabled. What configuration changes are required on the Pix to enable these options? Any assistance will be greatly appreciated.
Mike Bowyer

Hi Mike,
"Transparent Tunneling" and "Local Lan Access" are two different things. "Transparent Tunneling" is dealing with establishing an IPSec Tunnel even if a NAT device is between your client and the VPN-Headend-Device. "Local LAN Access" is dealing with access to devices in the LAN your VPN-Client-Device is connected to.
What do you mean exactly with "disabled once the connection is made" ?
You can check the local LAN Access by having a look at the Route-Table of the VPN-Client:
Right Click the yellow VPN-lock Icon in System-Tray while the VPN-Connection is active and select "Statistics ...". Have a look at the second register page "route details".
Are any local LAN routes displayed when your are connected ?
And - always remember two important restrictions the Online Help of the VPN-Client is mentioning:
1: This feature works only on one NIC card, the same NIC card as the tunnel.
2: While connected, you cannot print or browse the local LAN by name; when disconnected, you can print and browse by name.
Carsten
PS: Removing Split Tunnel won't enable local LAN access as all traffic would be sent into the IPSec tunnel.

"The file [name of file] may have been changed by another user since you last saved it." Issue affects both network and local files.

When a certain user saves a file in Excel 2010, she gets a message: "The file <name of file> may have been changed by another user since you last saved it." She can choose to save as another file or overwrite with her changes.
This just started happening a week or so ago. She was concerned that someone else was accessing her files, but we did several tests that opened, made a change and saved in a matter of seconds, and she still gets the message. It happens on
most files, but not all – both network and local.
We already tried the QFE_Saskatchewan registry fix. I also checked the file server for Services for Macintosh.

You may be confused by the error in Excel saying “another user”. Actually Excel cannot tell who (the real human) is editing the file. Based on my research the No.1 possibility of the error is KB2626998.
2626998 Connection to a network document is lost in the 2007 Office system or in Office 2010 after the computer resumes from standby
http://support.microsoft.com/kb/2626998
For Excel 2010, follow these steps:
a. Click Start , click Run , type regedit in the Open box, and then click OK .
b. Locate and then select the following registry subkey: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Excel\Options
c. On the Edit menu, point to New , and then click Dword Value .
d. Type NetworkAvailableTimeInSeconds , and then press Enter.
e. Right-click NetworkAvailableTimeInSeconds , and then click Modify .
f. In the Value data box, click Decimal , type a number value, and then click OK .
Note This registry subkey sets the time, in seconds, that Excel waits for the network to resume. For example, if you type 15 for the number value, Excel waits 15 seconds for the network to resume. You might have to do some tests in your own environment to
determine an appropriate value. You may have to try multiple numbers.
g. Locate and then select the following registry subkey.
HKEY_CURRENT_USER\Software\Microsoft\office\14.0\common\Internet
h. Repeat step 2C through step 2F again. Reuse the same value that you used previously.
i. Exit Registry Editor.
Feel free to post back. Thanks.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

How to show both SC and Local Currency in PLD at Amount place?

Hi sir,
I want to show both System Currency and Local Currency in PLD at the Amount Place.
And amount in Words also.
When i preview my PLD Report than it show the both SC and LC in Words.
So,plz help me sir.!

Hello jyotasna ,
Docuement total always in one currency depend on selected Customer or Vendor and if you want to in two currency then you should make UDF(User Define Field) for other currency.
also make FMS for calculation in this UDF .
If you want to amount in word in PLD then you should use ,select option Amount in words
for this configuration you should need workaroud.
Thanks
Manvendra Singh Niranjan

Can external users change their language, time zone, and locale settings?

Hi,
We’re migrating our hosts from WebEx cloud to our on-prem solution right now (CWMS 1.5.1.323.A).
We’ve learned that CWMS 1.5 does not provide an online address book where hosts could customize language, time zone, and locale settings for their external attendees.
Do external users have any chance at all to change their language, time zone and locale settings individually?
Thank you,
Helge

Hi Dejan,
"external users" are those participants, who do not have an LDAP account in our deployment, since they are not intendet to act as hosts: our stakeholders, partners, customers, clients.
It looks, as if these people would stick to the systems' default language / time zone / locale.
We are wondering if there might be a CWMS-component like this:
https://artcom.webex.com/cmp0307l/webcomponents/widget/preference.do?serviceType=MC&siteurl=artcom&target=Page&backUrl=%2Fmw0307l%2Fmywebex%2Fdefault.do%3Fsiteurl%3Dartcom%26service%3D1
to allow those "extenal" participants to make their adjustments.
Thank you,
Helge

BOXI3.0: Universe and Local Data Source Selection

Hi all. I am Alias.
I have one question. For the full XI3.0 installation, one of the products is Web Intelligence Rich Client.
In Web Intelligence Rich Client, we can have Data Source Selection which is Universe and Local Data Source. But for Web Intelligence/InfoView, we can only select universe, or maybe canu2026 I need to explore more but still could not find it.
Hope you guys can help me on this matter.
Best regards,
Alias

Hi Jacques.
Thanks for the link.
WRC we need to install for every user desktop right? But for Webi/inforview we only install at server.
In term of licensing, how it works?
Regards,
Alias

Globle and local Inventory

Hi:
I know there are global inventory and local inventory. the global inventory is pointed by oraInst.loc. Where is local inventory? THX

Please see these MOS docs, it should answer your question.
Global and Local Inventory explained [ID 360079.1]
How to find the location of GLOBAL Inventory and LOCAL inventory on R12.x ? Need Clarifications Oracle Inventory [ID 878717.1]
How to create, update or rebuild the Central Inventory for Applications R12 [ID 742477.1]
Thanks,
Hussein

SEM -BCS Trasaction currency and Local Currency

SAPGURUS
I have one issue , When the users are doing Half yearly BCS they see that for one company code for one item period values Local currency is diifeernt from
Transaction currency .
My question is why this Transaction currency is different from local currecny.
How to rectify this .
Are they missing any exchnage rate conversion .
Thanks in Advance .
are they missing any exchnage rate conversion .

Hi Dan Sullivan
Thanks for the quick reply .
One more question .
I see in the BCS T Curency as Euro and Local currency as Euro .
but the period values localy currency is different from Transaction currency .
I think the values should be the same if both T Currecny and Local Currency is same .
I also observed that this particular difference is happening only for 2 particular set of accounts . Those accounts are related to Intercompany related G L Accounts values .
I also observed that in the Break down category for these G L Accounts The break down structure category has defined as defaulted .
I would like to know what would be the cause for the above .
Thanks in Advance .
Ravindrareddy.P.

SPAM Quarantine and Local Quarantine

Similar Messages

Maybe you are looking for