SPAM/SAINT - Open Data Extraction Requests

Hello All i am getting an warning during implementing patches for netweaver 701 sp3 and sp4.
" Phase CHECK_REQUIREMENTS: Explanation of Errors
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in the SAP Notes 1081287,
1083709 and 328181.
Call the Customizing Cockpit data extraction transaction and process all "
i checked listed note and implemented the same but still its showing me something in LBWE. i deleted all setup data for all the application data using tcode LBWG but its still showing in LBWE tcode.
this is the error i am getting after runing program 'RMCEXCHK'
Struct. appl. 04 cannot be changed due to setup table -> Long text
Message no. MCEX141
Diagnosis
Changing the extract structure for application 04 is not permitted, because the restructure table MC04P_0ARBSETUP for the extractor still contains data in 800.
You cannot change the structure in this status, because when you load an InfoPackage from BW, this leads to errors.
Procedure
Delete the entries for all restructure tables for application 04.
Any reply will be highly appreciated.
Mani

Hi Mani
I am also facing the same issue. Can you please tell me how you have resolved the issue.
Thanks & Regards
Venkat

Similar Messages

R/3 SP Import:Open data Extraction requests Error

We are getting the below error when Basis doing the upgrade support packeage in R/3 source system.
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in SAP Note 328181.
Call the Customizing Cockpit data extraction transaction and process all
open extraction requests.
Intially we have cleared the entries in LBWQ,RSA7 and SM13.But after clearing these entries also we are getting the same above error.
For support package upgrade in R/3 do we need to delete the SETUP table also in production environment?.
Is there any other way around without deleting the setup table to upgrade support package in R/3 system?
Please help us with your inputs urgently..
Thanks
Message was edited by:
Ganesh S

Thanks Siggi for the suggestion.
We have already cleared the v3 updates by running RMBWV* job manually.After clearing all the entries in LBWQ,RSA7 and SM13 still we have got the same above error.
When we imported In R/3 development system after deleting the setup table we didn't get the above error.But we are concerned about deleting the setup table in production system
though already deltas are running fine.
Is there any other way around? or deleting the setup table is the only option?
Please help...

Open data extraction orders - Applying Support Packs

Dear All,
I have done the IDES 4.6C SR2 installation.
While updating the support packs, i get the message saying
CHECK_REQUIREMENTS phase.
Open data extraction orders
There are still open data extraction orders in the system
process these before the start of the object import because changes to the ABAP Dictionary structures could lead to data extraction orders not being able to be read after the import and their processing terminating
For more details about this problem, see Note 328181.
Go to the Customizing cockpit for data extraction and start the processing of all open extraction orders.
I have checked the Note.
But this is something m facing for the first time.
Any suggestion!!!
Rgds,
NK

The exact message is :
Phase CHECK_REQUIREMENTS: Explanation of the Errors
Open Data Extraction Requests
The system has found a number of open data extraction requests. These
should be processed before starting the object import process, as
changes to DDIC structures could prevent data extraction requests from
being read after the import, thus causing them to terminate. You can
find more information about this problem in SAP Note 328181.
Call the Customizing Cockpit data extraction transaction and process all
open extraction requests.

Numerours open extract requests pending

Hi,
When the basis consultants installed a support package, it resulted in an error - 'Numerours open extract requests pending' and have requested ABAPers help.
CAn you please guide me how to process these extract requests. It will be good, if i get any pointers on this.
thanks,
Sridevi

Hello,
I was dealing with same situation on our system and searching for some safe solution. Today I found new (14 days) SAP Note 1083709 - Error when you import Support Packages, which includes a new report RMCEXCHK, which should help you diagnose the steps you need to carry out.
It is somehow similar to the report RMCSBWCC, but this report is LIS structure based (You cannot run it generically).
You already found report RMCEX_SETUP_ENTRIES, which checks for entries in MC*SETUP tables.
I am not a BW expert, as far as I know, business events triggers insertion of entries in LO queues MCEX, jobs defined in trans. LBWE (LIS-BW-VB_APPLICATION) periodically transfer data to BW delta queues and from there BW system then gets the data.
Regards, Matjaz

System.Data.SqlClient.SqlException: Cannot open database "MSCRM_CONFIG" requested by the login. The login failed. Login failed for user 'NT AUTHORITY\SYSTEM

Dear ALL
After successfully shifting the CRM from 2011 to 2013 i found a problem in Reporting section none of the report is working after some finding i conclude that MSCRM_FetchDataSource is not able to connect successfully
Through my report manager i tried to test the connection of MSCRM_FetchDataSource but i got the following error
System.Data.SqlClient.SqlException: Cannot open database "MSCRM_CONFIG" requested by the login. The login failed. Login failed for
user 'NT AUTHORITY\SYSTEM'.
I already add the NT Authority \ System as a db_owner under my database user of MSCRM_CONFIG
But still no success any one have any idea why it's happaning
Regards
RB

I found a solution I hope my post will help other
I gave the db_owner to 'NT AUTHORITY\SYSTEM' and 'NT AUTHORITY\NETWORK' and assigned with both CRM and Config database
It resolved my issue
RB

How to extract OPENING DATE information in /SAPAPO/RRP3 to BW?

Hi All,
I would like to extract OPENING DATE information in transaction code /SAPAPO/RRP3 to BW. Has anyone tried doing this before?
Thank you.
Regards,
Joy

Hi Joy
We are using /SAPAPO/EFPL_ORD_NET_GET this FM will give you the entire pegging relationship for any order in the live-cache. While extracting this information you get all the order details with all the required dates.
you need to paas the values to this FM as below.
I_SIMVERID = active version 000
I_SIMSESSID = simsession ID you can create using FM /sapapo/RRP_SIMSESSION_CREATE
I_ORDERS_TAB= in this table,you need to pass the CHAR22 GUID of any order like planned/sales order/pur.req..
Thanks
Amol

Maintenance License not recognized by SPAM/SAINT

Brand new installation. Generated keys. Imported using SLICENSE. I show a valid Maintenance License but when going into SPAM/SAINT I get an error saying it is not valid.
I go to SDCCN and try to create a "Maintenace Package" task and get "No action possible" message.
The hardware keys match.
SAP Note 1280664 says to make sure that SM_<SID>CLNT<CLIENT>_BACK is available and working. This RFC is not in the system at all.
GoTo > Settings > Task-specific brings up nothing at all.
Does this connection have to be set up manually? or am I missing a major step somewhere?

Hello Jeff,
Please make sure that the maintenance certificate has been installed via t code SLICENCE manually.
If this has been done, please follow the below steps.
Please review the note Number 763561
& follow the below steps:
5. Q: When trying to create a task in SDCCN an error message appears:
    ' No action possible '. Why can the task not be created?
    A: SDCCN has not yet been initialised correctly, and so the customizing for the tasks has not been filled yet.
    SDCCN can be initialised locally by following these steps:
o Ensure that the task processor job is deactivated, via SDCCN -> Goto -> Settings -> Task processor
o Then initialize the tool via SDCCN ->Utilities -> Activate.
o If the initialize was succesful you should get the following messages:
Local initialization of new Service Data Control Center
   Activation successful
   Destination to SAP created
   AUTO_SESSION_MANAGER descheduled
   Settings filled
   Service Data Control Manager tasks created
   Task processor scheduled
   Jobname                        /BDL/TASK_PROCESSOR
Please try to fix the problem by deactivating the task processor (deleting any still open jobs called /BDL/TASK_PROCESSOR) and then reactivating SDCCN via Utilities -> Activate. If that doesn't help, please open the system and supply user & password so that I may look at the problem in the systems.
If none of these fit you, please ensure that you have a maintenance certificate which should be installed via transaction slicense. Has this already been done? If not, please log a message for SAP on component SV-SMG-LIC and request for the maintenance certificate.
Hope this helps.
Thanks,
Mark

Problem faced while update to spam/saint version 39 basis realease 700

Hi
I am a SAP BASIS Administrator at fresher level.My spam/saint version was 22 when i applied SPAM/SAINT version 39 for SAP BASIS 700 , at first time it was not imported and struck at *Movenamespace with return code zero* phase and the import log showed error at IMPORT_PROPER phase,
But as described in the SAP note 822379 , i followed the instruction emptied the queue and imported the spam/saint version again
This time the import was completed and showed a green status. But next time when i wanted to apply SAP_BASIS 10 support pacake immediately it showed an runtime syntax error.
The error is as follows
Runtime Errors         SYNTAX_ERROR
Date and Time          02.03.2011 11:57:31
|Short text
|    Syntax error in program "CL_OCS_RT_ANALYSIS============CP ".
|What happened?
|    Error in the ABAP Application Program
|
|    The current ABAP program "SAPLSPAM" had to be terminated because it has
|    come across a statement that unfortunately cannot be executed.
|
|    The following syntax error occurred in program
|     "CL_OCS_RT_ANALYSIS============CP " in include
|     "CL_OCS_RT_ANALYSIS============CM002 " in
|    line 135:
|    "Die Transformation "RTA_TRAFO" hat keine aktive Version."
|    " "
|    " "
|    " "
|
|    The include has been created and last changed by:
|    Created by: "SAP "
|    Last changed by: "SAP "
|
|Error analysis
|    The following syntax error was found in the program
|     CL_OCS_RT_ANALYSIS============CP :
|    "Die Transformation "RTA_TRAFO" hat keine aktive Version."
|    " "
|    " "
|    " "
|Trigger Location of Runtime Error
|    Program                                 SAPLSPAM
|    Include                                 LSPAMU69
|    Row                                     364
|    Module type                             (FUNCTION)
|    Module Name                             SPAM_PROLOGUE
|Source Code Extract
|Line |SourceCde
334
| 335|*       and set default start options according to the new scenario
| 336|        CALL FUNCTION 'OCS_SET_DEFAULT_START_OPTIONS'
| 337|          EXPORTING
| 338|            iv_ocs_tool = lv_tcode
| 339|            iv_scenario = lv_scenario
| 340|            iv_save     = on
| 341|          EXCEPTIONS
| 342|            OTHERS      = 0.
343
| 344|*       inform the user about the scenario change
| 345|        MESSAGE i336(tn) WITH lv_inact_scenario lv_scenario
| 346|                         RAISING emergency_stop.
| 347|      ENDIF.   "sy-saprl(2) < '46'
| 348|    ENDIF.
| 349|*   activate all halt points for current transaction
| 350|    UPDATE patstop SET cont_step = off
| 351|                   WHERE ocs_tool = lv_tcode.
352
| 353|*   initialize the application specific checks
| 354|    UPDATE patcheck SET ret_code   = space
| 355|                        reason     = space
| 356|                        message    = space
| 357|                        ign_in_dia = off
| 358|                        ign_in_btc = off
| 359|                        queue_id   = lv_queue_id
| 360|                    WHERE ocs_tool = lv_tcode AND
| 361|                          active   = on.
362
| 363|*   collect some source data for the runtime analysis
|>>>>>|    CREATE OBJECT lr_rt_analysis
| 365|      EXPORTING
| 366|        iv_queue_id = lv_queue_id
| 367|      EXCEPTIONS
| 368|        others      = 99.
| 369|    IF sy-subrc = 0.
| 370|      CALL METHOD lr_rt_analysis->collect_conf_data
| 371|        EXPORTING
| 372|          iv_conf_group = 'ALL'
| 373|        EXCEPTIONS
| 374|          OTHERS        = 0.
| 375|      CALL METHOD lr_rt_analysis->save
| 376|        EXCEPTIONS
| 377|          OTHERS = 0.
| 378|    ENDIF.
| 379| ENDIF.                               "SY-SUBRC = 0
380
| 381|* (5) now start with the application:
| 382|* - set the OCS environment
| 383|* - read the settings
Can anyone please suggest a bolution on BASIS perspective

Hi all,
Not sure if this thread is still active at all, but just to be sure, and to close it once and for all
to solve this issue :
Icheck class CL_OCS_RT_ANALYSIS in TA SE24 and go to method GET_XML.
Search for RTA_TRAFO, jump to object via doubleclick and activate it.
Afterwards install the latest TP and R3trans tools from sapnet, and SPAM should be working again.
Best regards,
Menno van Rooij

SPAM/SAINT support packs.

Hello,
I am updating SPAM?SAINT from 700/0023 to 700/0030. I have found the Support Pack version in Service Market place and when I did click Download it does not show up in my Download manager.
Is it because all these can only be downloaded from Solution Manager?
How do I go find the Spam/Saint Update in Solution Manager? I could not find it. Like we have the additional components in service market place, do we also have some kind of a tab in SOlman ?
Thanks
Druva

Druva,
>When I open the .sim file for Maintenance Optimizer in step 5 it says" enter the Maintenance ERP >system Date and then press enter". What does it actually mean.
Sorry but when I have approved SP downloads with SOLMAN, I had no .sim file to deal with.
So, I don't have an answer....
I just put my SPs in my download basket, then I go in SOLMAN in solution_manager transaction where I choose whatever solution we have (there is no control, I can approve CRM SPs with an BI solution...). Then When I use Download manager, I see all the approved SPs.
Regards,
Olivier

Data extraction for BW/BI

Hi ,
I am new in BW.Can anyone send me material on DATA EXTRACTION IN BW? I mainly want the material for LO-extraction.If anyone could provide the material on extractors like LO-cockpit,Generic data source etc.I will be really thankful.Please send the material at "baljinder4u_gmail.com" .
Thanks in advance

Hi Rakesh
Step-by-step control flow for a successful data extraction with SAP BW:
   1. An InfoPackage is scheduled for execution at a specific point of time or for a certain system- or user-defined event.
   2. Once the defined point of time is reached, the SAP BW system starts a batch job that sends a request IDoc to the SAP source system.
   3. The request IDoc arrives in the source system and is processed by the IDoc dispatcher, which calls the BI Service API to process the request.
   4. The BI Service API checks the request for technical consistency. Possible error conditions include specification of DataSources unavailable in the source system and changes in the DataSource setup or the extraction process that have not yet been replicated to the SAP BW system.
   5. The BI Service API calls the extractor in initialization mode to allow for extractor-specific initializations before actually starting the extraction process. The generic extractor, for example, opens an SQL cursor based on the specified DataSource and selection criteria.
   6. The BI Service API calls the extractor in extraction mode. One data package per call is returned to the BI Service API, and customer exits are called for possible enhancements. The extractor takes care of splitting the complete result set into data packages according to the IDoc control parameters. The BI Service API continues to call the extractor until no more data can be fetched.
   7. The BI Service API finally sends a final status IDoc notifying the target system that request processing has finished (successfully or with errors specified in the status IDoc).
Note
Control parameters specify the frequency of intermediate status IDocs, the maximum size (either in kilobytes or number of lines) of each individual data package, the maximum number of parallel processes for data transfer, and the name of the application server to run the extraction process on.
*Here is LO Cockpit Step By Step*
LO EXTRACTION
- Go to Transaction LBWE (LO Customizing Cockpit)
1). Select Logistics Application
       SD Sales BW
            Extract Structures
2). Select the desired Extract Structure and deactivate it first.
3). Give the Transport Request number and continue
4). Click on `Maintenance' to maintain such Extract Structure
       Select the fields of your choice and continue
             Maintain DataSource if needed
5). Activate the extract structure
6). Give the Transport Request number and continue
- Next step is to Delete the setup tables
7). Go to T-Code SBIW
8). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Delete the content of Setup tables (T-Code LBWG)
vi. Select the application (01 u2013 Sales & Distribution) and Execute
- Now, Fill the Setup tables
9). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Filling the Setup tables
vi. Application-Specific Setup of statistical data
vii. SD Sales Orders u2013 Perform Setup (T-Code OLI7BW)
        Specify a Run Name and time and Date (put future date)
             Execute
- Check the data in Setup tables at RSA3
- Replicate the DataSource
Use of setup tables:
You should fill the setup table in the R/3 system and extract the data to BW - the setup tables is in SBIW - after that you can do delta extractions by initialize the extractor.
Full loads are always taken from the setup tables
please follow the link
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=dataEXTRACTIONIN+BW&cat=sdn_all
Regards
Tapashi
Edited by: Tapashi Saha on Aug 18, 2008 11:03 AM

Error in spam/saint update TP_CANNOT_CONNECT_SYSTEM TP_INTERFACE_FAILURE

Dear All,
while i am updating spam / saint in saint t code I am facing an error TP_INTERFACE_FAILURE and reason for the error is TP_CANNOT_CONNECT_SYSTEM
the error details are
The installation was stopped, since an error occurred during the phase
CHECK_REQUIREMENTS, which the Add-On Installation Tool is unable to
resolve without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
    -   Error in phase: CHECK_REQUIREMENTS
    -   Reason for error: TP_CANNOT_CONNECT_SYSTEM
    -   Return code:
    -   Error message: TP_INTERFACE_FAILURE
Notes on phase CHECK_REQUIREMENTS
n this phase the system checks the various requirements for the add
nstallation. The following are reasons why this phase may fail:
   TP_CANNOT_CONNECT_TO_SYSTEM: tp cannot log on to the system
   database.
   Check the action log (in the menu, choose Goto -> Action Log). Y
   may be able to use the detailed tp error message in this log to
   identify and remove the cause of the error.
   QUEUE_NOT_EMPTY: There are still OCS requests in the transport
   buffer which are not completed. You can show these requests with
   following tp command:
   tp SHOWBUFFER <SID> -DSOURCESYSTEMS= TAG=SPAM
   These requests have to be completed or deleted from the buffer
   before you can continue importing the queue.
o   CANNOT_DROPBUFFER: tp cannot delete old, incompletely processed
     Support Packages from the tp buffer.
     Check the action log (in the menu, choose Goto -> Action Log). You
     may be able to use the detailed tp error message in this log to
     identify and remove the cause of the error.
The Add-On Installation Tool requires that the Change and Transport
System (CTS) be configured correctly. For more detailed information,
read the online documentation available from Help -> SAP Library ->
mySAP Technology Components -> SAP Web Application Server -> BC Change
and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
please help me, its very important to complete this job i am in a critical position
Thanks
Senthil

Dear,
Please refer these links,
tp_cannot_connect_system
Problem loading a package in the SAINT transc. (TP_CANNOT_CONNECT_SYSTEM)
Regards,
R.Brahmankar

Error in Spam / saint update TP_STEP_FAILURE and DDIC_ACTIVATION

Dear All,
While updating spam/ saint update I am facing this error
Details of Error:
The installation was stopped, since an error occurred during the phase
DDIC_ACTIVATION, which the Add-On Installation Tool is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
    -   Error in phase: DDIC_ACTIVATION
    -   Reason for error: TP_STEP_FAILURE
    -   Return code: 0008
    -   Error message: tp step A, return code
        0008
Notes on phase DDIC_ACTIVATION
In this phase the system activates the imported Data Dictionary objects.
This phase may terminate for several reasons:
o   TP_INTERFACE_FAILURE: The system was unable to call the tp
     interface.
o   TP_FAILURE: The system was unable to execute the tp program. For
     more information, see the SLOG or ALOG log file.
o   TP_STEP_FAILURE: The system was unable to perform the tp step DDIC
    activation successfully. To see the cause of the problem in the
    activation log, choose Logs.
    If you import two or more OCS packages in one installation queue,
    and activate the Data Dictionary objects in the incorrect sequence,
    this can cause errors. In this case, the activation errors disappear
    if you repeat the activation run. To do this, choose Continue.
The Add-On Installation Tool requires that the Change and Transport
System (CTS) be configured correctly. For more detailed information,
read the online documentation available from Help -> SAP Library ->
mySAP Technology Components -> SAP Web Application Server -> BC Change
and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
Please help me
Thanks
Senthil

Hi,
i am having the same problem with SPAM
Error in phase: DDIC_ACTIVATION
Reason for error: TP_STEP_FAILURE
Return code: 0008
Error message: OCS Package SAPKA70012, tp step A, return code
0008
however i dont have the option to continue.. Please help
thanks

How to get useful data from request?

Hello.
I am looking for creating a management tool for a web site. All I want is that is there any ready to use API or package or open source project for retrieving user�s information? I just mean that is there any easy to use way in java to get useful data from a client (for example location, his or her system configuration and information �).
Thanks.

If you dump all the data from request (see the javadoc, and especially the "header methods" ) you'll see the data you can get are quite simple.
The only thing you can try to rely on are ;
- the IP address from the sender (when reversed to DNS, you can sometime use the tld to locate the country it comes from. Yet, you'll get many .com name, so it's not that significant. it may also give you the IAP used). Note that if the user is using a proxy, it's the proxy IP that you'll collect
- the User-Agent header : from this, you can guess the OS and the browser used
- the Referer header : usefull to get where your user comes from (where they found a link to your site)
- the Cookie header : if you're using a servlet container with session id stored in cookie, you should see the Cookie header appear on the second request to your site. That helps finding out wether your user accep cookie or not (from a server point).
Besides these, i don't think you can get any other useful data without asking your users on a form. Note that it's the client that decides to send Referer, User-Agent or Cookie headers. Those are not mandatory to the Http Protocole and some browser allow their user to fool their content (butmore than 90% of the widespread browsers don't)

Unable to open "view picking Request"...

Hi,
Unable to open "view picking Request" form in sales order, getting error
"Function not available on this responsibility change responsibility or contact your system administrator"
My requirement is finding the 'pick release date' after order shipped.
please suggest me to move forward.
Thanks
Suresh

Please post the details of the application release, database version and OS.
Please see these docs.
In Sales Order Form, Attempt to View Shipping Status and get Error: Function Not Available to This Responsibility [ID 377649.1]
Unable To View Sales Order Workflow Status [ID 304960.1]
Sales Order Details Not Available In Task Drilldown [ID 832811.1]
Cannot Activate Actions > View Only Adjustment Screen [ID 1351013.1]
Thanks,
Hussein

File path of open data storage

Hello all!
Now I'm using the blocks of open data storage, write data and close data storage for storing and extracting result data. For the file path issue, before I
set the data path by double clicking the "open data storage" block and inserting the file location in the indicated place, and that worked!
Now since I made a stand alone application of this program and shall use it in other computers, the file location I inserted in open data storage block isn't
valid any more in other PCs. So I modified my source code by connecting a "current vi path" to the open data storage block's file path node instead of
inserting it inside the block, and this doesn't work! During running there shows an error in the write data block saying that the storage refnum isn't valid!
I'm wondering why I couldn't specify the file path like this. Any way to allow me to specify the file path as the current vi path?
Thanks!
Chao
Solved!
Go to Solution.

You need to account for the path changes when built in to an application, have a look at this example.
https://decibel.ni.com/content/docs/DOC-4212
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

SPAM/SAINT - Open Data Extraction Requests

Similar Messages

Maybe you are looking for