SPAM/SAINT update for 640/35 getting stucked.

Dear all,
when i am trying to apply ptach for basis relase 640 sapm/saint patch 35 ,
it is getting hanged during processing & returns the following log.
Phase CHECK_REQUIREMENTS: Explanation of Errors
Some open conversion requests still exist in the ABAP Data Dictionary
for the following ABAP Dictionary objects. To avoid inconsistencies and
loss of data, you must process these conversions first.
Proceed as follows:
- Open a new session.
- Start the Database Utility (transaction SE14).
- Correct the inconsistencies for the specified objects.
- Repeat the import phase. If no more inconsistencies are found, the
import continues.
Phase CHECK_REQUIREMENTS: Open ABAP Dictionary Conversions
Object Type       Object Name
Pools/Clusters    M_ZAUF
                  M_ZEKP
                  M_ZMA2
                  M_ZMAR
                  M_ZMAT
                  M_ZMEK
                  M_ZMVA
                  M_ZOM1
                  M_ZPLN
I have tried correcting the inconsistensies but no luck.. please advice if there is any sap note or function module to overcopme this errors.
regards,
rahul

Dear all,, did dome research,,,
when we go se14
DBrequests --- >craeted with import..
there i can see all 9 objectss..
there i have option of selecting 9 objects & deleting them..
so did that & it is resolved.. thanks a lot.
regds,
rahul

Similar Messages

SPAM/ SAINT update still running

Dear All,
I have installed SAP Web Neweaver 04s as ABAP on MSSQL database windows OS and upgraded kernel.
But now when i go to import SPAM /SAINT from level 17 to 23 ie. SAPKD64023 then its running in IMPORT_PROPER Phase since last 5-6 hrs.
PLEASE SUGGEST how to speed up my process??
Log is as below:
Log Overview for SAPKD64023
      SAPKD64023              SPAM/SAINT Update - Version 640/0023
        BPW        System BPW
                   Generate Transport Information File      02.01.2008 13:41:45    (0) Successfully Completed
                   Test Import                              02.01.2008 13:41:46    (0) Successfully Completed
                   Import Request Piece List                02.01.2008 13:41:47    (4) Ended with Warning
                   Import ABAP Dictionary Objects           02.01.2008 13:41:52    (4) Ended with Warning
                   02.01.2008 10:54:46    (4) Ended with Warning
                   02.01.2008 13:41:52    (4) Ended with Warning
                   ABAP Dictionary Activation               02.01.2008 14:13:28    (4) Ended with Warning
            Import steps not specific to transport request
                   ABAP Dictionary Distribution             02.01.2008 14:23:31    (4) Ended with Warning
Regards & Thanks,
Ankita.

Dear Marqus,
Happy New Year!!
And Thanks for ur reply n when i check SLOG* it says:
Please check the system. Use transactions SM21, SM37, SM50.
WARNING:       (This warning is harmless if no further warnings follow.)
WARNING: System BPW. Warning.        20080102161830 :
WARNING:       Background job RDDIMPDP could not be started or terminated abnormally.
      Please check that the R/3 system is running.
      Please check the system. Use transactions SM21, SM37, SM50.
WARNING:       (This warning is harmless if no further warnings follow.)
Now wat shd i do to resolve it??
Regards,
Ankita.

Update SPAM/SAINT package for release 7.00 terminated

Hi All,
We have installed solman 4.0 on windows environment. when i tried to import spam/saint update, it got terminated in the phase IMPORT_PROPER.
Also, in SM50 it is showing on workprocess running for long and gets terminated. I also have run SGEN once my installation was over.
0 DIA 4028 Running Yes 649 SAPMS38L 000 DDIC Delete D010INC
can anyone suggest what the problems would be..
Thanks and Regards,
sailesh K

Hi
I have tried three times. In fact I also restarted SAP System by changing rdisp/max_wp_runtime to 0 as there were lot of short dumps with timeouts.
I notice that currently job RDDGEN0L is running at present.
Also,
1) Dialogue work process running Report SAPMS38L with action Delete on Table D0101NC (User DDIC).
2) BGD Work process Status On Hold Reasn RFC with report SAPLSDDD (User DDIC).
SPAM Status is "MOVE NAMETABS FINISHED WITH RETURN CODE 0". Import logs finished with error code 4.
Regards
Chandu
P.S : FYI I am opening another thread with the same message.

When I try to update to iOS5, iTunes gets stuck on "Backing Up" its been there for hours and it barely moves

When I try to update to iOS5, iTunes gets stuck on "Backing Up" its been there for hours and it barely moves. It finished backing up one then it went to a "Extracting Software" on the iTunes status bar up top and then it gave me an error saying something along the lines of "There was an error with the server" and back to square 1. Ive been trying since the morning and same problem. Always stuck on the backup, help?

You may have lost your connection to the apple server or connection with your itunes library.
1) You will need to shutdown Itunes and disconnect your iphone from the USB cable.
2) Reconnect your Iphone to the usb cable, wait for the device to be recognised and or drivers to be installed.
3) once all ok, your itunes should automatically open up/connect (if you have this setting set on), otherwise double click your itunes icon on your desktop.
4) once all sychronised and connected. go to Summary tab and UPDATE your iphone again.
Hope this works for you, as this happend to me and tried the above steps and wala!!! all good.
If the above still fails, restart your pc/apple and turn off/on your modem and then try again.
this normally happens if your connection from your device to the itunes hangs or looses its connection, or have a bad connection to the internet / apple server.
in windows the RPC Locator is normally the cause of this, in apple i have no idea (as im not an apply user).
Give it a shot!
if this helps you and works ...why not rep/like my response up!

OCS queue stuck on aborted spam/saint update

I have a spam saint update stuck in a queue. I have tried resetting the queue, and I have no option to delete the object in the queue.
Please advise.
Thanks

1) try the following.
Call SE37 -> Utilities pull down menu -> Repair Function group -> Function Group = SPAM
2) Please make sure you are using the latest version of tp and R3trans
If Point 1 doesnt help please unpack the package again by command
sapcar -xvf SAPKD00xxx
Please remove the entries related to the spam from the following tables: tepsin, pat01 & pat03, further disassemble the spam file,
upload again and try to apply.
Please do the following on console with <sid>adm user:
Run a 'tp delfrombuffer SAPKD00xxx <SID>
then add the patch to the buffer with
'tp addtobuffer SAPKD00xxx u1 pf=<PATH_PROFILE>'
and finally import the patch with >
'tp import SAPKD00xxx <SID> u26 pf=<PATH_PROFILE>'
Thanks
Prince Jose

Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help :(

Well my ipod 4th gen was updated it shut off and now when i try to turn it on it stays on the apple logo for abit then gets stuck on a white screen od blue or mixed colores i really need help fixing this plzz help

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

SPAM/SAINT Update stuck on Import phase Epilogue

Under status it shows that SPAM/SAINT update is being processed and SPAM status shows red light.
Import phase is EPILOGUE.
I got out of the SPAM and restarted it, it shows the updated SPAM version but status is still red light.
I am updating to version 6.20/30 from 29
Any idea or suggestion

Hello Bill
Do you see any processes running in SM50?
Try to come out from SPAM and go again in SPAM and check.
regards,
Payal

Support Package Manager: SPAM/SAINT Update

Hi,
I downloaded the SPAM/SAINT Update and executed it with SAPCAR in the directory of the Application Server Folder. The original file KD74053.sar (6767 kb) is still in the folder, but a new file 'signature.smf' (5 kb) appeared.
What is that one for?
Next, I think that I should be able to take a next step with transaction SPAM (Support Package --> Load Packages --> From Application Server), but it's 'blanked out' and not accessible.
What are the next steps and how do I really get the SPAM/SAINT update working, so I can proceed to my actual goal, the Support Package Update.
Thanks!

Hi,
To reset DDIC password you could go with
SQL> select bname from usr02 where mandt='000' and bname='SAP*'
If the user SAP* exists then delete the user with below command
SQL> delete from usr02 where mandt='000' and bname='SAP*'
Run the below command to verify whether user deletion was successful.
SQL> select bname from usr02 where mandt='000' and bname='SAP*'
SQL> commit;
After that login to client 000 with SAP* and password as pass
reset the password for user DDIC with SAP* user.
Thanks,
Gaurav

Spam/saint update and support package

Hi,
our solution manger server is crashed long back.Now i installed the solution manager in seperate server.
solution manager iam getting SPAM/SIANT version as 7.00/0.20 and in development/production SPAM/SAINT version in 7.00/0.23.
as per check in service market place under SPAM/SAINT update 700 iam getting SPAM/SAINT update version 700 iam got the message as to import Support Packages SAPKH60008 and SAPKGPAD08. Please advice.
*in solution manager support package is
SAPKB70008
SAPKA70008
SAPKIPYJ78
SAPKITLQI2
SAPKW70008
SAPKNA7005
SAPKU50005
SAPK-40005INCPRXRPM
SAPKITL416
SAPK-15074INSTPL
SAPKITLOG3*
*in dev/produ system support package is
SAPKB70011
SAPKA70011
SAPKIPYJ7B
SAPKITLQI3
SAPKW70012
SAPKNA7008
SAPKE60015
SAPKH60008
SAPKGPID08
SAPKGPGD08
SAPKGPRD08
SAPK-60008INFINBASIS
SAPKGPPD08
SAPKGPFD08
SAPKGPHD15
SAPKGPDD08*
please advice me in service.marketplace>downloads>support packages and from where i will get packages as in dev/production system.
Regards,
Asif

Hi Asif,
How to get particular support package from service market place .
EX:SAPKB70011
If you want to download the patch SAPKB70011:
Service Market Please --> Downloads --> SAP Support Packages --> Search for Support Package and Patches.
At the search field, enter SAPKB7001* it will give you all the support package from SAPKB70010 to SAPKB70019 if available.
You can add the required patch to your download manager.
Thanks & Regards,
Nagendra.

Error in Spam / saint update TP_STEP_FAILURE and DDIC_ACTIVATION

Dear All,
While updating spam/ saint update I am facing this error
Details of Error:
The installation was stopped, since an error occurred during the phase
DDIC_ACTIVATION, which the Add-On Installation Tool is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
    -   Error in phase: DDIC_ACTIVATION
    -   Reason for error: TP_STEP_FAILURE
    -   Return code: 0008
    -   Error message: tp step A, return code
        0008
Notes on phase DDIC_ACTIVATION
In this phase the system activates the imported Data Dictionary objects.
This phase may terminate for several reasons:
o   TP_INTERFACE_FAILURE: The system was unable to call the tp
     interface.
o   TP_FAILURE: The system was unable to execute the tp program. For
     more information, see the SLOG or ALOG log file.
o   TP_STEP_FAILURE: The system was unable to perform the tp step DDIC
    activation successfully. To see the cause of the problem in the
    activation log, choose Logs.
    If you import two or more OCS packages in one installation queue,
    and activate the Data Dictionary objects in the incorrect sequence,
    this can cause errors. In this case, the activation errors disappear
    if you repeat the activation run. To do this, choose Continue.
The Add-On Installation Tool requires that the Change and Transport
System (CTS) be configured correctly. For more detailed information,
read the online documentation available from Help -> SAP Library ->
mySAP Technology Components -> SAP Web Application Server -> BC Change
and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
Please help me
Thanks
Senthil

Hi,
i am having the same problem with SPAM
Error in phase: DDIC_ACTIVATION
Reason for error: TP_STEP_FAILURE
Return code: 0008
Error message: OCS Package SAPKA70012, tp step A, return code
0008
however i dont have the option to continue.. Please help
thanks

Update to 7.8 gets stuck

hi i'm trying to uodate my windows phone (nokia lumia 800) but it gets stuck at step six... it says it is going to restart and my phone actually restarts but than zune won't progress to step 7.
i've try'd to cancel the update and restart the update program but it gets stuck at the same point again...
what can i do?
Solved!
Go to Solution.

It happened to me today. Update to WP7.8 went through smoothly. It got stuck on Nokia update for Windows Phone. I don't know what to do next.
Attachments:
Nokia 800.jpg ‏90 KB

Importing a SPAM/SAINT Update

Hello,
I am trying to update SPAM/SAINT.
In Transaction SPAM, when I import SPAM/SAINT Update the package SAPKD70139 is proposed for the queue.
I need to import this one SAPKD70042, that already decompressed in EPS/in.
(Both are displaying in OCS overview)
Could anybody help me to find the way deleting a Not imported Package (SAPKD70139) in OCS Packages / SPAM ?
Many Thanks in advance
Latif

Issue is solved.
Regards

Spam/Saint update failed

Hello,
My current SPAM/SAINT version is 20.
I tried updating it to version 38.
But while updaing m facing a runtime error which is generating a short dump.
Short Text of dump is as follows:
Syntax error in program "CL_OCS_RT_ANALYSIS============CP
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSPAM" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program
     "CL_OCS_RT_ANALYSIS============CP " in include
     "CL_OCS_RT_ANALYSIS============CM002 " in
    line 135:
    "Die Transformation "RTA_TRAFO" hat keine aktive Version."
    The include has been created and last changed by:
    *Created by: "SAP "    Last changed by: "SAP "*
Below is the status of Import phase
SPAM/SAINT update is being processed
SPAM status: (Red)
Import phase:     PROLOGUE
Please help.
Thanks Deepak

I have similar problem, i have the following runtime error:
The following syntax error occurred in program
"CL_OCS_RT_ANALYSIS============CP " in include
"CL_OCS_RT_ANALYSIS============CM002 " in
line 13:
"Type "OCSRT_TOOL" is unknown"
I have create OSS-message and SAP reply;s:
Regarding your issue, please transport the class CL_OCS_RT_ANALYSIS
from other system in the landscape which is on the same release and
support package level and with the SPAM\SAINT update version as the
PRD system to the PRD system to resolve the syntax error.
Once the syntax error is resolved in the PRD the SPAM\SAINT update can
be continued in the SPAM to import the SPAM\SAINT update in the system.
For more information please refer the link specified below for
including the objects manually in the transport request.
http://help.sap.com/saphelp_nw70/helpdata/en/57/38e2864eb711d182bf0000e829fbfe/content.htm
I looked to the url, but still not understanding how to add it...can someone explain me how to export it?
Thanks,
Cheung

Spam/saint update to 40

Hi,
Can we update spam/saint to level 40 without use of solution manager?
What are the requirements needed to download the spam/saint update?
Thanks in Advance

Hi,
Refer to help.sap.com for understanding the functionality of SPAM and SAINT.
http://help.sap.com/saphelp_46c/helpdata/en/d7/56e89a884b11d2b422006094b9ea64/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/d7/56e89a884b11d2b422006094b9ea64/content.htm
Can we update spam/saint to level 40 without use of solution manager?
Specify the SAP release.
You must use solution manager to download SPAM / SAINT update.
Because you need to approve the download request from MOPZ.
What are the requirements needed to download the spam/saint update?
The basic requirement would be to import latest SPAM/SAINT package before you update your Support pack levels for ABAP system.
[Link|http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CDIQFjAB&url=http%3A%2F%2Fhelp.sap.com%2Fprintdocu%2Fcore%2Fprint46c%2Fen%2Fdata%2Fpdf%2FBCUPGOCSSPAM%2FBCUPGOCSSPAM.pdf&ei=4_BBT4DXI4jm2QWXwZynCA&usg=AFQjCNFWOUEaYbDCXw_1fR_gTBm-yeOXWw]
Br,
Venky

Hi I bought a jailbroken 3gs phone. ios 4.1. I restored it. got it factory unlocked. now if I update it will it get stuck or crash?

hi I bought a jailbroken 3gs phone. ios 4.1. I restored it. got it factory unlocked. now if I update it will it get stuck or crash?

The 2G iPod can only go as high as iOS 4.2.1
To help find compatible apps
Old Apps
VintApps 3.1.3 for iPhone, iPod touch, and iPad on the iTunes App Store
apps for ios 4.2.1: Apple Support Communities
Finding iOS 4.2.1 Apps Compatible with Older Devices - Apple Club
HT4972 Touch Game 4.2.1 Apps: Apple Support Communities
apps for 4.2.1 (also works for 3.1.3)
Tip - Finding 4.2.1 apps that work on an...: Apple Support Communities
4.2.1 iPod 2nd generation unable to use any...: Apple Support Communities

SPAM/SAINT update for 640/35 getting stucked.

Similar Messages

Maybe you are looking for