SPAM/SAINT update problem
Hi all,
I was trying to perform a delta upgrade on my system for PI_BASIS_620 from version 2002_1 to 2002_2. I made sure that the system meets the necessary pre-requisites, but when I tried to apply the upgrade patch. I got the following error message:
Phase CHECK_REQUIREMENTS: Explanation of Errors
Some open conversion requests still exist in the ABAP Data Dictionary
for the following ABAP Dictionary objects. To avoid inconsistencies and
loss of data, you must process these conversions first.
Proceed as follows:
- Open a new session.
- Start the Database Utility (transaction SE14).
- Correct the inconsistencies for the specified objects.
- Repeat the import phase. If no more inconsistencies are found, the
import continues.
Phase CHECK_REQUIREMENTS: Open ABAP Dictionary Conversions
Object Type Object Name
Table Index ACAC_OBJECTS ~ 1
ACE_SOP_REFKEY ~ REF
CACS00_DOCSE ~ STM
CCIHT_ERQT ~ 002
CCIHT_WAH ~ 002
CMX_DA_REG ~ I02
EHSWAT_BPID ~ A
LPLTM ~ TSK
LRITK ~ TSK
LRQNT ~ RQS
LRQSI ~ RQI
LTKPL ~ GRP
LTKPL ~ HU
LTKPL ~ SEL
LTKRT ~ RTY
T7EHS00_MAPPERNR ~ 010
T7EHS00_PERHEAL ~ 001
T7EHS00_PERHEAL ~ 010
T7EHS00_PERPROSC ~ 001
T7EHS00_SERVICE ~ 001
T7EHS00_SERVICE ~ 010
VIRADOCITEM ~ 004
I would be really grateful if somebody could help me figure out this problem and if possible suggest a solution to this.
Vaibhav Rao.
Hi,
It shows that the selected tables are not consistent for upgradation.
Go to tcode se14
Enter the table name ie ACE_SOP_REFKEY
Press enter
In the next screen execute Checking
See what it shows.
Adjust and activate database
or In the initial screen press F8
Select the under mentioned object such as "ACE_SOP_REFKEY "
check for the extn like "REF "in the id column.
After selecting the rewuired objects Shedule the selections and proceed accordingly.
On completion it will adjust and activate the selected objs.
Then try the update.
Hope this helps.
If resolved appreciate with a few points
Regards
Similar Messages
-
Error in Spam / saint update TP_STEP_FAILURE and DDIC_ACTIVATION
Dear All,
While updating spam/ saint update I am facing this error
Details of Error:
The installation was stopped, since an error occurred during the phase
DDIC_ACTIVATION, which the Add-On Installation Tool is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
- Error in phase: DDIC_ACTIVATION
- Reason for error: TP_STEP_FAILURE
- Return code: 0008
- Error message: tp step A, return code
0008
Notes on phase DDIC_ACTIVATION
In this phase the system activates the imported Data Dictionary objects.
This phase may terminate for several reasons:
o TP_INTERFACE_FAILURE: The system was unable to call the tp
interface.
o TP_FAILURE: The system was unable to execute the tp program. For
more information, see the SLOG or ALOG log file.
o TP_STEP_FAILURE: The system was unable to perform the tp step DDIC
activation successfully. To see the cause of the problem in the
activation log, choose Logs.
If you import two or more OCS packages in one installation queue,
and activate the Data Dictionary objects in the incorrect sequence,
this can cause errors. In this case, the activation errors disappear
if you repeat the activation run. To do this, choose Continue.
The Add-On Installation Tool requires that the Change and Transport
System (CTS) be configured correctly. For more detailed information,
read the online documentation available from Help -> SAP Library ->
mySAP Technology Components -> SAP Web Application Server -> BC Change
and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
Please help me
Thanks
SenthilHi,
i am having the same problem with SPAM
Error in phase: DDIC_ACTIVATION
Reason for error: TP_STEP_FAILURE
Return code: 0008
Error message: OCS Package SAPKA70012, tp step A, return code
0008
however i dont have the option to continue.. Please help
thanks -
Hello,
My current SPAM/SAINT version is 20.
I tried updating it to version 38.
But while updaing m facing a runtime error which is generating a short dump.
Short Text of dump is as follows:
Syntax error in program "CL_OCS_RT_ANALYSIS============CP
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSPAM" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_OCS_RT_ANALYSIS============CP " in include
"CL_OCS_RT_ANALYSIS============CM002 " in
line 135:
"Die Transformation "RTA_TRAFO" hat keine aktive Version."
The include has been created and last changed by:
*Created by: "SAP " Last changed by: "SAP "*
Below is the status of Import phase
SPAM/SAINT update is being processed
SPAM status: (Red)
Import phase: PROLOGUE
Please help.
Thanks DeepakI have similar problem, i have the following runtime error:
The following syntax error occurred in program
"CL_OCS_RT_ANALYSIS============CP " in include
"CL_OCS_RT_ANALYSIS============CM002 " in
line 13:
"Type "OCSRT_TOOL" is unknown"
I have create OSS-message and SAP reply;s:
Regarding your issue, please transport the class CL_OCS_RT_ANALYSIS
from other system in the landscape which is on the same release and
support package level and with the SPAM\SAINT update version as the
PRD system to the PRD system to resolve the syntax error.
Once the syntax error is resolved in the PRD the SPAM\SAINT update can
be continued in the SPAM to import the SPAM\SAINT update in the system.
For more information please refer the link specified below for
including the objects manually in the transport request.
http://help.sap.com/saphelp_nw70/helpdata/en/57/38e2864eb711d182bf0000e829fbfe/content.htm
I looked to the url, but still not understanding how to add it...can someone explain me how to export it?
Thanks,
Cheung -
Support Package Manager: SPAM/SAINT Update
Hi,
I downloaded the SPAM/SAINT Update and executed it with SAPCAR in the directory of the Application Server Folder. The original file KD74053.sar (6767 kb) is still in the folder, but a new file 'signature.smf' (5 kb) appeared.
What is that one for?
Next, I think that I should be able to take a next step with transaction SPAM (Support Package --> Load Packages --> From Application Server), but it's 'blanked out' and not accessible.
What are the next steps and how do I really get the SPAM/SAINT update working, so I can proceed to my actual goal, the Support Package Update.
Thanks!Hi,
To reset DDIC password you could go with
SQL> select bname from usr02 where mandt='000' and bname='SAP*'
If the user SAP* exists then delete the user with below command
SQL> delete from usr02 where mandt='000' and bname='SAP*'
Run the below command to verify whether user deletion was successful.
SQL> select bname from usr02 where mandt='000' and bname='SAP*'
SQL> commit;
After that login to client 000 with SAP* and password as pass
reset the password for user DDIC with SAP* user.
Thanks,
Gaurav -
OCS queue stuck on aborted spam/saint update
I have a spam saint update stuck in a queue. I have tried resetting the queue, and I have no option to delete the object in the queue.
Please advise.
Thanks1) try the following.
Call SE37 -> Utilities pull down menu -> Repair Function group -> Function Group = SPAM
2) Please make sure you are using the latest version of tp and R3trans
If Point 1 doesnt help please unpack the package again by command
sapcar -xvf SAPKD00xxx
Please remove the entries related to the spam from the following tables: tepsin, pat01 & pat03, further disassemble the spam file,
upload again and try to apply.
Please do the following on console with <sid>adm user:
Run a 'tp delfrombuffer SAPKD00xxx <SID>
then add the patch to the buffer with
'tp addtobuffer SAPKD00xxx u1 pf=<PATH_PROFILE>'
and finally import the patch with >
'tp import SAPKD00xxx <SID> u26 pf=<PATH_PROFILE>'
Thanks
Prince Jose -
Importing a SPAM/SAINT Update
Hello,
I am trying to update SPAM/SAINT.
In Transaction SPAM, when I import SPAM/SAINT Update the package SAPKD70139 is proposed for the queue.
I need to import this one SAPKD70042, that already decompressed in EPS/in.
(Both are displaying in OCS overview)
Could anybody help me to find the way deleting a Not imported Package (SAPKD70139) in OCS Packages / SPAM ?
Many Thanks in advance
LatifIssue is solved.
Regards -
SPAM/ SAINT update still running
Dear All,
I have installed SAP Web Neweaver 04s as ABAP on MSSQL database windows OS and upgraded kernel.
But now when i go to import SPAM /SAINT from level 17 to 23 ie. SAPKD64023 then its running in IMPORT_PROPER Phase since last 5-6 hrs.
PLEASE SUGGEST how to speed up my process??
Log is as below:
Log Overview for SAPKD64023
SAPKD64023 SPAM/SAINT Update - Version 640/0023
BPW System BPW
Generate Transport Information File 02.01.2008 13:41:45 (0) Successfully Completed
Test Import 02.01.2008 13:41:46 (0) Successfully Completed
Import Request Piece List 02.01.2008 13:41:47 (4) Ended with Warning
Import ABAP Dictionary Objects 02.01.2008 13:41:52 (4) Ended with Warning
02.01.2008 10:54:46 (4) Ended with Warning
02.01.2008 13:41:52 (4) Ended with Warning
ABAP Dictionary Activation 02.01.2008 14:13:28 (4) Ended with Warning
Import steps not specific to transport request
ABAP Dictionary Distribution 02.01.2008 14:23:31 (4) Ended with Warning
Regards & Thanks,
Ankita.Dear Marqus,
Happy New Year!!
And Thanks for ur reply n when i check SLOG* it says:
Please check the system. Use transactions SM21, SM37, SM50.
WARNING: (This warning is harmless if no further warnings follow.)
WARNING: System BPW. Warning. 20080102161830 :
WARNING: Background job RDDIMPDP could not be started or terminated abnormally.
Please check that the R/3 system is running.
Please check the system. Use transactions SM21, SM37, SM50.
WARNING: (This warning is harmless if no further warnings follow.)
Now wat shd i do to resolve it??
Regards,
Ankita. -
Spam/saint update and support package
Hi,
our solution manger server is crashed long back.Now i installed the solution manager in seperate server.
solution manager iam getting SPAM/SIANT version as 7.00/0.20 and in development/production SPAM/SAINT version in 7.00/0.23.
as per check in service market place under SPAM/SAINT update 700 iam getting SPAM/SAINT update version 700 iam got the message as to import Support Packages SAPKH60008 and SAPKGPAD08. Please advice.
*in solution manager support package is
SAPKB70008
SAPKA70008
SAPKIPYJ78
SAPKITLQI2
SAPKW70008
SAPKNA7005
SAPKU50005
SAPK-40005INCPRXRPM
SAPKITL416
SAPK-15074INSTPL
SAPKITLOG3*
*in dev/produ system support package is
SAPKB70011
SAPKA70011
SAPKIPYJ7B
SAPKITLQI3
SAPKW70012
SAPKNA7008
SAPKE60015
SAPKH60008
SAPKGPID08
SAPKGPGD08
SAPKGPRD08
SAPK-60008INFINBASIS
SAPKGPPD08
SAPKGPFD08
SAPKGPHD15
SAPKGPDD08*
please advice me in service.marketplace>downloads>support packages and from where i will get packages as in dev/production system.
Regards,
AsifHi Asif,
How to get particular support package from service market place .
EX:SAPKB70011
If you want to download the patch SAPKB70011:
Service Market Please --> Downloads --> SAP Support Packages --> Search for Support Package and Patches.
At the search field, enter SAPKB7001* it will give you all the support package from SAPKB70010 to SAPKB70019 if available.
You can add the required patch to your download manager.
Thanks & Regards,
Nagendra. -
Hi,
Can we update spam/saint to level 40 without use of solution manager?
What are the requirements needed to download the spam/saint update?
Thanks in AdvanceHi,
Refer to help.sap.com for understanding the functionality of SPAM and SAINT.
http://help.sap.com/saphelp_46c/helpdata/en/d7/56e89a884b11d2b422006094b9ea64/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/d7/56e89a884b11d2b422006094b9ea64/content.htm
Can we update spam/saint to level 40 without use of solution manager?
Specify the SAP release.
You must use solution manager to download SPAM / SAINT update.
Because you need to approve the download request from MOPZ.
What are the requirements needed to download the spam/saint update?
The basic requirement would be to import latest SPAM/SAINT package before you update your Support pack levels for ABAP system.
[Link|http://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CDIQFjAB&url=http%3A%2F%2Fhelp.sap.com%2Fprintdocu%2Fcore%2Fprint46c%2Fen%2Fdata%2Fpdf%2FBCUPGOCSSPAM%2FBCUPGOCSSPAM.pdf&ei=4_BBT4DXI4jm2QWXwZynCA&usg=AFQjCNFWOUEaYbDCXw_1fR_gTBm-yeOXWw]
Br,
Venky -
SPAM/SAINT Update stuck on Import phase Epilogue
Under status it shows that SPAM/SAINT update is being processed and SPAM status shows red light.
Import phase is EPILOGUE.
I got out of the SPAM and restarted it, it shows the updated SPAM version but status is still red light.
I am updating to version 6.20/30 from 29
Any idea or suggestionHello Bill
Do you see any processes running in SM50?
Try to come out from SPAM and go again in SPAM and check.
regards,
Payal -
I was importing a Support Package update (SPAM/SAINT-Update Version 7.00/0026) by SPAM transaction but it displays me a message saying that there's a previous update at queue which has to be imported first, this update is SPAM/SAINT-Update Version 7.00/0022 but it has error status, I applied note 684564 and reset its status from 'Imported' to 'New', but I didn't backup the file ($DIR_EPS_ROOT/in ) in the server, I tried to dowload it again from the SAP marketplace but isn't available anymore, the name of the object is SAPKD70022.
Is there a different place to download this object or a way to delete it from SPAM queue?In Se37,Use the function module OCS_RESET_QUEUE --- >execute --->IV_TOOL=SPAM, IV_FORCE=X
Deleted all the files from \usr\sap\trans\tmp..
Please make sure thatthere is no TP process
or R3trans process running in the system at Operating system level.
If any process exist, Please kill the process.
Upload the spam/saint package again
Scheduled the program RDDIMPDP using Report RDDNEWPP in se38.
Edited by: Venkatramani Hariharan on Jun 6, 2008 2:15 PM -
Dear All,
while i am updating spam / saint in saint t code I am facing an error TP_INTERFACE_FAILURE and reason for the error is TP_CANNOT_CONNECT_SYSTEM
the error details are
The installation was stopped, since an error occurred during the phase
CHECK_REQUIREMENTS, which the Add-On Installation Tool is unable to
resolve without your input.
After you have corrected the cause of the error, continue with the
import by choosing Continue in the queue display.
The following details help you to analyze the problem:
- Error in phase: CHECK_REQUIREMENTS
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code:
- Error message: TP_INTERFACE_FAILURE
Notes on phase CHECK_REQUIREMENTS
n this phase the system checks the various requirements for the add
nstallation. The following are reasons why this phase may fail:
TP_CANNOT_CONNECT_TO_SYSTEM: tp cannot log on to the system
database.
Check the action log (in the menu, choose Goto -> Action Log). Y
may be able to use the detailed tp error message in this log to
identify and remove the cause of the error.
QUEUE_NOT_EMPTY: There are still OCS requests in the transport
buffer which are not completed. You can show these requests with
following tp command:
tp SHOWBUFFER <SID> -DSOURCESYSTEMS= TAG=SPAM
These requests have to be completed or deleted from the buffer
before you can continue importing the queue.
o CANNOT_DROPBUFFER: tp cannot delete old, incompletely processed
Support Packages from the tp buffer.
Check the action log (in the menu, choose Goto -> Action Log). You
may be able to use the detailed tp error message in this log to
identify and remove the cause of the error.
The Add-On Installation Tool requires that the Change and Transport
System (CTS) be configured correctly. For more detailed information,
read the online documentation available from Help -> SAP Library ->
mySAP Technology Components -> SAP Web Application Server -> BC Change
and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
please help me, its very important to complete this job i am in a critical position
Thanks
SenthilDear,
Please refer these links,
tp_cannot_connect_system
Problem loading a package in the SAINT transc. (TP_CANNOT_CONNECT_SYSTEM)
Regards,
R.Brahmankar -
How to Get Out of A SPAM/SAINT Update
I am applying SPAM?SAINT Update No. SAPKD62020 to SAPKD62023. No. 20 is showing cancelled when I display all the Support packages loaded but will not let me go forward without getting rid of this cancelled one. How do I remove it so I can go forward with this. This is very frustrating. I tried to reset it but not succesful.
Please helpThank all of you guys. Believe me I did all of these things mentioned above. I read so many threads about this particular problem and it finally becomes confusing.
What I did:
- Reset the SPAM/UPDATES and still did not work
- Used tcode SEPS which I read from SAP site and remove everything and then I got a green status - Re-applied that first patch again - Same thing it got stuck by saying again Error on: CHECK_REQUIREMENTS and QUEUE_NOT_EMPTY
- Checked Disk space and it's ok
- Checked Security for the log folder - ok
- Checked RFC connection test - ok
- Used tp connect <SID> command line - ok
- Used tp SHOWBUFFER -D SOURCESYSTEMS= TAG=SPAM - This one never works - I always get the following below
C:\Documents and Settings\rjoseph>tp showbuffer -dsourcesystem= tag=spam
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 340.16.31 (release 640)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)<b></b>
Dont't know what to do anymore. Spent whole night researching this.
As a matter of fact. My QAS system which is basically the same as DEV I am done with all 80 patches in less than 8 hours. Why is it DEV which is a very important system is causing me grieves.
Anyway I opened a ticket with SAP and hope they will get back with me today.
Once again thank you all of. If you can thing of anything else, I would really appreciate it. -
SPAM/SAINT update error patch 23 - 640
Hi:
I´m recieving the following dump when updating SPAM/SAINT patch 23 under 640:
Syntax error in program "SAPLOCS_UI "
Error in ABAP application program.
The current ABAP program "SAPLSPAM" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLOCS_UI ", the following syntax error occurred
in the Include "LOCS_UIU15 " in line 1:
"Function "OCS_DISPLAY_WITH_USER_BUTTON" not found in Function Library."
In program "SAPLOCS_UI ", the following syntax error occurred:
"Function "OCS_DISPLAY_WITH_USER_BUTTON" not found in Function Library."
Thanks a lot,
ArmentaHii read modification adjustments in this document u will get a clear idea.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCUPGOCSSPAM/BCUPGOCSSPAM.pdf
Award points if useful -
To reset SPAM/SAINT update
Hi!
I have started to update SPAM/SAINT (from 26 to 30).
The update is stopping in phase IMPORT_PROPER.
How can I sdelete this patch in tcode SPAM?
I would like to install new kernel patch firstly (from 133 to 159).
Thank you very much!
regards
Thomas G.D'oh!
Maybe you are looking for
-
Uncontrolled Memory usage in webcenter application.
I have a webcenter application which I use as Consumer Application. This application contains 30 Portlets registered using portlet producers. All these portlets are again webcenter applications portletized using the Portlet Faces Bridge. I deploy thi
-
BOM function module to find sub components
Hi all , I got a requirement . I have to find out the components required for a given product .Like if A is made up of X,Y and Z . If i have A , a final product , then how could i know its sub components X,Y and Z . Is there any Function module . R
-
Hello Friends, Im using alv with checkbox and im getting selected checkbox values in my internal table but now i want to pass this internal table to another transaction and want to display the same in table control in screen painter. also when the us
-
How to rename oracle9i database in windows 2000
Hi All, I am trying to rename an oracle database on windows 2000. I am having some issues...can anyone help me how to fix it. Trace file is created from existing database (ORCLDB) using alter database backup controlfile to trace and the following ste
-
Hi Can anyone tell me if PR5 can make photo frame as PR 2 you could easily make a photo frame by going into video effects and in the Transform folder you could chose Clip apply it to your photo or video on the time line then adjust how thick you want