SPAM support packages error
Hi,
I've tried to upgrade CRM 5.0 SR 1 to SR 2, during the operation I had error during the phase TP_IMPORT, the error was an buffer inconsistency. It was impossible to reset the queue during this phase. So I deleted entries in the database table PAT01-PAT02-PAT03, now queue is empty but I've internal error of spam check when I try to reload this package.
In the background, I've the job still running RDDGENOL (triggered RAISE_EXECPTION, and timeout) created by ddic during the SP, who lock tables for SP, I can't stop it.
Furthermore, a dialogue process running with a BDG process waiting for RFC, which is also impossible to cancel.
Any help will be thankful.
hi people,
we have checked for the status of support package in Transaction SPAM traffic signal is still red and in the Phase RUN_SPAU_? it is stuck and even after restarting import it shows clean-up phase is left and it ends with same error mention above
the support package name is SAPKB70014 size is 116266 MB now after restarting the Import the following error message comes
The import was stopped, since an error occurred during the phase
RUN_SPAU_?, which the Support Package Manager is unable to resolve
without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: RUN_SPAU_?
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code: 0255
- Error message: Could not connect to semaphore server
we run all the phase in background, and even after entering the support package number in transaction SPAU there it is showing
"No objects within selected filter parameteres"
Q.1 Any idea what went wrong and how to fix that?
Q.2 Is there any problem if we run the all four phases of support package in background or it should be run in dialog ?
latest tp & R3trans updated
Similar Messages
-
Hi Experts,
Currently i am installing suppport package for PI 7.10.
SP : SAP_BASIS.
Just newly installed the sap system -> after kernel upgrade, i applied latest SPAM verion - 27.
NowBusiness package SAP -basis is in the process. I started the package three hours back. still is in the process. i chcked the log files /usr/sap/trans/tmp/SAPIB71006.<SID>
==================================================================== ).
4 ETW000 1 entry for SOTR_TEXT rejected - language not installed (00127991401D
1DEBBA864FE336A2EB85J*
4 ETW690 COMMIT "0" "1008778130"
4 ETW000 0 entries for SOTR_TEXT imported (00127991401D1DEBBA864FE336A2EB85E*)
4 ETW690 COMMIT "0" "1008778130"
4 ETW000 0 entries for SOTR_TEXT imported (00127991401D1DEBBA864FE336A2EB85D*)
4 ETW690 COMMIT "0" "1008778130"
4 ETW690 COMMIT "0" "1008778130"
4 ETW000 0 entries for SOTR_HEAD imported (00127991401D1DEBB0E8673749278B85*).
4 ETW690 COMMIT "0" "1008778130"
4 ETW000 0 entries for SOTR_TEXT imported (00127991401D1DEBB0E8673749278B85J*
4 ETW000 1 entry for SOTR_TEXT rejected - language not installed (00127991401D
1DEBB0E8673749278B85J*
4 ETW690 COMMIT "0" "1008778130"
=====================================================================
Observed that error says `entry for SOTR_TEXT rejected - language not installed`
I have not installed the language import till now. I am wondering that that could be an issue.
My logs are keep updating. symptom tells than till import is in the progress.
Could someone reply, Does the Language import must for Support package installation ?.
Now Spam screen says that `Main import ` on the screen.
Thanks
ThirumalHi Vani,
Thank you very much,
SAP_Basis package has been successfully completed. As u said language import not required to update support packages.
It took me around 7 hours to complete the update.Now i have started the Rest of the Business package.
It seems its totally killing my time. I think it shouldnot take this much time to complete a single package I need to install other packages like .
SAP_ABA, PI_Basis,SAP_BW and ST_PI.
Hi Vamshi,
Thank you. Finally package completed.
Thanks and Regards
Thirumal -
Importing Support Packages - Error during XPRA_EXECUTION
Hello,
Database: Oracle 10.2.0.4
Operation System: Windows Server 2008 X64
I´m facing with an error during an importing of support packages in our Solution Manager Ehp1 system (SPS 20 to SPS 25).
I checked the import logs of the queue and I see in there the following error:
Program terminated (job: RDDEXECL, no.: 02083200)
See job log
Execution of programs after import (XPRA)
End date and time : 20110126020847
Ended with return code: ===> 12 <===
When I checked the job log I see in there this:
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server SAPSM were synchronized
Internal session terminated with a runtime error (see ST22)
Job cancelled
I went to ST22 and I see in there that specific short dump which show:
Short text
XSLT: No valid XML source
What happened?
The transformation is not possible since the XML source document cannot
be parsed.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator.
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_XSLT_RUNTIME_ERROR', was not
caught in
procedure "TRANSFORM_FROM_XML" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Either the source document contains invalid XML or it is handled
incorrectly in the ABAP program that called the transformation.
How to correct the error
The most common cause of this error is a conflict between the encoding
specified in the declaration <?xml version="1.0" encoding="..."?> in the
document and the actual encoding of the data.
If the document is held in an ABAP string, the actual encoding is the
system code page. If this does not match the declaration, a parsing
error may occur.
These conflicts are a particular issue when XML documents are produced
in one system and then imported into a system with a different code page
(as strings).
For this reason, XML documents should be held as binary data (X strings)
, if they are extracted from the system or accessed from outside.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"XSLT_BAD_SOURCE_CONTEXT" "CX_XSLT_RUNTIME_ERROR"
"CL_SM_BFR_CONTENT_TRANSPORT===CP" or "CL_SM_BFR_CONTENT_TRANSPORT===CM00E"
"TRANSFORM_FROM_XML"
The exception must either be prevented, caught within proedure
"TRANSFORM_FROM_XML" "(METHOD)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
To prevent the exception, note the following:
Can you help how to correct this situation for I can continue the update of support packages!
Best regards,
João Dimas - PortugalHello William,
Which import logs do you refer?
I pasted in my first message the log of import... that is the unique error that it appeared.
I checked the SLOG:
STOP MOVE NAMETABS SSM 6 20110125215838 SAP_BASIS SAPSM 20110125214839404
START MAIN IMPORT SSM I 20110125215838 SAP_BASIS SAPSM 20110125214839404
STOP MAIN IMPORT SSM I 20110125235752 SAP_BASIS SAPSM 20110125214839404
START TBATG CREATION OF EN SSM n 20110125235752 SAP_BASIS SAPSM 20110125214839404
START tp_getprots SSM Y 20110125235753 SAP_BASIS SAPSM 20110125214839404
WARNING: '\SAPSMsapmnt rans mpN110126.SSM' : cant open
(tpfsnam.c:504)
WARNING: '' : cant open
(tpfsnam.c:584)
WARNING: '\SAPSMsapmnt rans mpN110126.SSM' : cant open
(tpfsnam.c:504)
WARNING: '' : cant open
(tpfsnam.c:584)
STOP tp_getprots SSM Y 20110126000148 SAP_BASIS SAPSM 20110125214839404
STOP TBATG CREATION OF EN SSM n 20110126000148 SAP_BASIS SAPSM 20110125214839404
INFO EXECUTION OF STANDAR SSM 9 not needed SAP_BASIS SAPSM 20110125214839404
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all SSM 0004 20110126000149 SAP_BASIS SAPSM 20110125214839404
I also checked the ULOG which has the following records:
APServiceSSM 20110126013719 RFC: tp XPA ALL SSM pf=\SAPSMsapmnt rans inTP_DOMAIN_SSM.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dbatch_proc=1 tag=spam -Dtransdir=\SAPSMsapmnt rans (pid=5276)
APServiceSSM 20110126020829 RFC: tp SHOWPARAMS SSM pf=\SAPSMsapmnt rans inTP_DOMAIN_SSM.PFL -Dtransdir=\SAPSMsapmnt rans (pid=5196)
APServiceSSM 20110126020830 RFC: tp CONNECT SSM pf=\SAPSMsapmnt rans inTP_DOMAIN_SSM.PFL -Dtransdir=\SAPSMsapmnt rans (pid=5196)
APServiceSSM 20110126020831 RFC: tp XPA ALL SSM pf=\SAPSMsapmnt rans inTP_DOMAIN_SSM.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dbatch_proc=1 tag=spam -
Any idea what´s happen?!
Kind regards,
João Dimas - Portugal -
Can't Find SAPKD70021 - SPAM Update Tool Support Package
Hi, All:
We now need patch SPAM support package 21 - SAPKD70021. But now from http://service.sap.com/swdc , we can only find patch 22 - 24. There's no patch 21, but our currently patch level is 20.
Do we the only one meet the problem?
Anyone can help? Thanks!
B.R.
H.DHi,
you can directly update the latest one..ie., 24
Regards
Umesh K -
Support Package Manager: SPAM/SAINT Update
Hi,
I downloaded the SPAM/SAINT Update and executed it with SAPCAR in the directory of the Application Server Folder. The original file KD74053.sar (6767 kb) is still in the folder, but a new file 'signature.smf' (5 kb) appeared.
What is that one for?
Next, I think that I should be able to take a next step with transaction SPAM (Support Package --> Load Packages --> From Application Server), but it's 'blanked out' and not accessible.
What are the next steps and how do I really get the SPAM/SAINT update working, so I can proceed to my actual goal, the Support Package Update.
Thanks!Hi,
To reset DDIC password you could go with
SQL> select bname from usr02 where mandt='000' and bname='SAP*'
If the user SAP* exists then delete the user with below command
SQL> delete from usr02 where mandt='000' and bname='SAP*'
Run the below command to verify whether user deletion was successful.
SQL> select bname from usr02 where mandt='000' and bname='SAP*'
SQL> commit;
After that login to client 000 with SAP* and password as pass
reset the password for user DDIC with SAP* user.
Thanks,
Gaurav -
Upload support package " help"
Hi Expert!! how are you....
i need you help, I will apply support package resouce human, but before making the upload in sap requires decompress in cmd with the command "SAPCAR -xvf Filename extract" since the directory usr/sap/trans/eps/in, but when I write I said "'SAPCAR' is not recognized as an internal or external command,operable program or batch file." It will be something that I am jumping? Some point an area not? I will have to call some command before?
thankHola Luis,
el directorio sapmnt es usualment un share creado para compartir la carpeta \usr\sap asi que si esta apuntando a \sapmnt\eps\in debe haber un path \usr\sap\eps\in.... chequea que el paquete este en esa carpeta...
de lo contrario si es un solo paquete el que vas a cargar en el systema ve a SPAM-> Support package ->Load -> From frontend y apunta a la direccion del SAR file... sap lo descomprimira automaticamente.
Saludos
Juan -
Dear all,
I am currently update my system.
The current version is ECC6 EHP7 based on NW7.4
SAP_BASIS 740 0002
SAP_ABA 740 0002
I would like to upgrade to SPS level 5
We use DB2 LUW 10.5
In the update phase, we encountered an error message:
SQL-error "-203-SQL0203N A reference to column "TABNAME" is ambiguou
2EETP345 s. SQLSTATE=42702" in DDL statement for "V_DSH_TF_DETAIL
As I can see in the log file, error messages are as below
===========================
3 ETP399 "SHPOSITION", DD30L."AUTOSUGGEST" AS "AUTOSUGGEST" FROM "DD31S"
3 ETP399 INNER JOIN "DD30L" ON "SHLPNAME" = "SUBSHLP" WHERE "AS4LOCAL" =
3 ETP399 'A' AND "AS4LOCAL" = 'A' AND "HIDEFLAG" = ' ' AND "AUTOSUGGEST" = 'X'
3 ETP399
2WETP000 06:42:38: Retcode 1: error in DDL statement for "V_DSH_ASSIGNED " - repeat
2EETP345 06:42:50: Retcode 1: SQL-error "-203-SQL0203N A reference to column "SHLPNAME" is ambiguo
2EETP345 us. SQLSTATE=42702" in DDL statement for "V_DSH_ASSIGNED "
2 ETP399 --------------- DB-ROLLBACK() ---------------
2EETP334 06:42:50: error in DDL, nametab for "V_DSH_ASSIGNED" not activated
3 ETP379X06:42:50: activating Nametab "V_DSH_TF_DETAIL":
3 ETP355Xstatements:
3 ETP399 CREATE VIEW "V_DSH_TF_DETAIL" AS SELECT DD02L."TABNAME" AS
3 ETP399 "TABNAME", DD03L."FIELDNAME" AS "FIELDNAME", DD02L."TABCLASS" AS
3 ETP399 "TABCLASS", DD03L."SHLPORIGIN" AS "SHLPORIGIN" FROM "DD02L" INNER
3 ETP399 JOIN "DD03L" ON "TABNAME" = "TABNAME" WHERE "AS4LOCAL" = 'A' AND
3 ETP399 "AS4LOCAL" = 'A'
3 ETP399
2WETP000 06:42:50: Retcode 1: error in DDL statement for "V_DSH_TF_DETAIL " - repeat
2EETP345 06:43:02: Retcode 1: SQL-error "-203-SQL0203N A reference to column "TABNAME" is ambiguou
2EETP345 s. SQLSTATE=42702" in DDL statement for "V_DSH_TF_DETAIL "
2 ETP399 --------------- DB-ROLLBACK() ---------------
2EETP334 06:43:02: error in DDL, nametab for "V_DSH_TF_DETAIL" not activated
2 ETP301 ----------------------------------------------------------------------
3 ETP361 "0" Shadow-Nametabs activated, DDL executed
2 ETP362 "2" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2014/03/19 06:42:38")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2014/03/19 06:43:02")
2 ETP301 ----------------------------------------------------------------------
2 ETP301 ----------------------------------------------------------------------
2 ETP364 Begin: Act. of Shadow-Nametabs ("2014/03/19 06:43:02")
2 ETP301 ----------------------------------------------------------------------
2 ETP301 ----------------------------------------------------------------------
2 ETP338XTouch Load of nametabs
===========================
I have checked another system which is also ehp7 based on NW740 0005, the view "V_DSH_TF_DETAIL" totally doesn't exist, but that is oracle database, here in my case is DB2 database, I have searched for SAP OSS but seems no sap notes for it.
Do you have any idea how to solve this problem? Big thanks!
Best regards,
Fresh manHi Ashutosh,
Many thanks for your reply, yes this definitely solve my problem.
But I feel quite confused what's the real reason.
Several weeks ago, I update a system (EHP7+Oracle) from 74002 to 74005, with SUM, no such problem, however this time, its EHP7+DB2 10.5, from 74002 to 74004, with SPAM, met this kind of problem...
The support packages are totally the same...
is it because I should upgrade from 02 to 05 directly? 04 has problem?
or I should update with SUM instead of SPAM?
or it is because of DB2??
or I should involve other packages like something like ST into the update queue?
Best regards,
Fresh -
Import Basis Support Package 7.00 error
Hi All,
I wanted to apply Basis support package 9 for release 7.00 for our solution manager 4.0 system.
When i started, it gave an error in the phase ADDON_CONFLICT? stage.. The message is as below:
Phase ADDON_CONFLICTS_?: Explanation of Errors
Conflicts were found between the Support Packages that you want to
import and the Add-Ons installed in the system. To guarantee the
consistency of your system, the import is interrupted until all Conflict
Resolution Transports (CRTs) for the listed Support Packages are
included in the queue.
To include the CRTs in the queue, proceed as follows:
- Write down the Support Packages and Add-Ons that have conflicts.
- Leave this screen by choosing 'Cancel' (F12).
- Load the CRTs for the Support Packages with conflicts from the SAP
Service Marketplace or request them from your Add-On supplier.
- Define the extended queue again in the Support Package Manager.
- Import the queue. The Support Package Manager executes all steps from
the beginning.
If the problem involves an SAP Add-On, see SAP Note 53902, which tells
you which CRTs resolve the conflicts. Otherwise contact the supplier of
your Add-On for details on how to proceed.
The following contains a table of Support Packages for each Add-On for
which conflicts were detected. The column 'Information on the Conflict
Resolution' specifies how you can resolve a conflict. For more
information, select the corresponding 'Information for the Conflict
Resolution'.
Conflicts Between Add-On ST 400 and Support Packages
Software Component Release Support Package Information on
Conflict Resolution
SAP_BASIS 700 SAPKB70009 Include CRT
Can anyone guide me how to proceed.
Thanks,
Sailesh KHi Shailesh,
You are employing one or more Add-Ons in your system, apply patches regularly and want to know how the consistency of your Add-Ons is guaranteed. The list of Add-Ons installed in your system is stored in table AVERS.
During patch application the SAP Patch Manager (SPAM) checks for conflicts between patches in the queue and the installed Add-Ons. A conflict occurs if an object delivered in a patch is also delivered in an Add-On. If conflicts are detected, SPAM stops processing at step ADDON_CONFLICTS_? and asks the user to load the corresponding CRTs into his system. The attributes of such CRTs match the Add-On id, Add-On release and patch predecessor (i.e. the patch in conflict).
The patch application can only resume if all CRTs are selected in the patch queue. To resolve a conflict SPAM does not check if the conflicting object is contained in a CRT. It suffices that the corresponding CRT has been selected in the patch queue. All conflicts raised by its patch predecessor(s) are then resolved in one go.
CRTs were introduced to protect the consistency of Add-Ons during the application of patches, such as Hot Packages and Legal Change Patches (LCP). There are two types of CRTs:
1. Conflict Resolution Transports (CRT)
A CRT resolves conflicts between one patch and one version of an Add-On including all previous versions. Example:
Consider a system where Add-On IS-X is installed. During the application of patches P1 and P2 SPAM detected conflicts between the patches and the Add-On.
To resolve these conflicts two separate CRTs are required, CRT1 and CRT2. A consistent patch queue looks like this:
P1
CRT1
P2
CRT2
SPAM will only let you resume the patch application if you redefine the patch queue containing all four patches. You can see the name of the patch for which a CRT resolves a conflict in the "Predecessor" field in the patch queue dialog.
2. Collective Conflict Resolution Transports (CCRT) are similar to CRTs but resolve conflicts between several patches and an Add-On. Example:
Consider the previous example but this time the conflicts between patches P1, P2 and Add-On IS-X are resolved not by two CRTs but by one Collective CRT (CCRT) CCRT1. A consistent patch queue looks like this:
P1
P2
CCRT1
SPAM will only let you resume the patch application if you redefine the patch queue containing all three patches. The CCRT is added at the end of its highest predecessor, here P2. You can see the highest predecessor for a CCRT in field "Valid to patch#" when you scroll the patch queue dialog to the right.
Keep in mind that a CCRT describes a range of patches for which conflicts are resolved, with the lower limit being the predecessor and higher limit the highest predecessor.
Cheers,
Shyam -
Error in the phase IMPORT_PROPER while applying support packages
Dear All,
I am on ECC 6.0(ABAP+JAVA) SR2, SUSE Linux 10 SP1, DB2.
I have successfully applied the kernel patch and started applying the support packages, i have successfully completed applying the ABAP, Basis, BW, HR and other related patches, but i am not sure why i am stuck at the import_proper phase when applying the SAP_APPL patches (SAPKH60008 and SAPKH60009 both in the same queue) and my tp log is as follows
========================================================================================================
START imp all SCD 20081229080538 DDIC sealcpro 20081229080537
INFO: event SAP_IMPORT_START triggered successfully
INFO TBATG CONVERSION OF SCD N not needed DDIC sealcpro 20081229080537
START tp_getprots SCD P 20081229080539 DDIC sealcpro 20081229080537
2EETP000 sap_dext called with msgnr "1":
2EETP000 db call info
2EETP000 function: db_setget
2EETP000 fcode: RT_SETB (65535)
2EETP000 tabname: TRBAT
2EETP000 len (char): 0
2EETP000 key:
2EETP000 retcode: 1
1AETP000 exit in function texitnow
ERROR: EXIT(16) -> process ID is: 5319
STOP imp all SCD 0016 20081229080602 DDIC sealcpro 20081229080537
=========================================================================================================
And also when i look at the Support package import logs they show that
TEST IMPORT
Import ABAP Dictionary Objects and
ABAP Dictionary Activation phases ended with return code 4
But i dont think this can give any problem.
I have tried to import from the phase where it stopped, but all of a sudden i get disconnected from SAP and get an error message saying that NO CONNECTION TO THE DATABASE, then when i check for the processes for dw and db2 there are process already running.
I had to start SAP and only then i was able to connect to the SERVER again.
Can you please help me on this..
For any more information plz let me know
Thanks and regards
HunkyDear Balaji,
Thank you very much for the reply...
I deleted the import request in the STMS and wi ran the RDDIMPDP and RDDMNTAB reports and restart the SPAM, but this time the SPAM immediately stopped, but i am still connected to the system and the error which i got earlier (database connection error ) is now not occuring.
But otherwise also i noticed that i get the following ABAP Dump while this error is triggering
===================================================================
DBIF_REPO_INTERNAL_ERROR
Internal error when accessing program "CX_SY_OPEN_SQL_DB=============CP ".
An unspecified internal error occurred in the SAP-internal
database interface.
For further analysis the SAP system log should be examined
(transaction SM21).
Check the entries in the developer trace of the relevant work process
(transaction ST11).
Attempted to access component "LOAD" of program
"CX_SY_OPEN_SQL_DB=============CP ".
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_REPO_INTERNAL_ERROR" " "
"SAPLSTPA" or " "
==========================================================================
Based on this error i searched few notes and got the below results 309583 and 132383 but these are not for my release.
So i request you to kindly help me on this as i am running out of time in delivering my server.
Waiting for all the valuble replies
Thank you in advance
Regards
Hunky -
Error while applying support packages
Hi,
I was applying support packges for NW 7.0 EHP2 for the components SAP BASIS/ABAP/PI BASIS & BW, the support package level was 02, I have downloaded 03,04,05,06 for all the above four components. While updating spam/saint update I got the above error, displayed below. But even while applying support packages I got a list of errrors.
1.
Category: Abap programming error
Runtime error: call_function_parm_unknown
CX_SY_DYN_CALL_PARAM_NOT_FOUND
abap program: RSSPAM07
Function parameter "IV_IMP_SCENARIO" in unknown
this first error displayed after applying SPAM/SAINT update.
2. The import was stopped, since an error occured during the phase IMPORT_PROPER, which the support package Manager is unable to resolve without your input
The following details help you to analyse the problem:
Error in phase : IMPROT_PROPER
Reason for error:
Return code:
Error Message:
Please provide any solution as soon as possible....The details of SLOG
START CMDIMPORT NG1 L 20120227162812 SHABZ BasisTrn3 20120227162811973
STOP CMDIMPORT NG1 L 20120227162813 SHABZ BasisTrn3 20120227162811973
START imp all NG1 20120227162821 SHABZ BasisTrn3 20120227162821661
INFO: event SAP_IMPORT_START triggered successfully
START DD IMPORT NG1 H 20120227162822 SHABZ BasisTrn3 20120227162821661
STOP DD IMPORT NG1 H 20120227162839 SHABZ BasisTrn3 20120227162821661
START DD ACTIVATION NG1 A 20120227162839 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 J 20120227162839 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 J 20120227162925 SHABZ BasisTrn3 20120227162821661
STOP DD ACTIVATION NG1 A 20120227162925 SHABZ BasisTrn3 20120227162821661
START DISTRIBUTION OF DD-O NG1 S 20120227162925 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 S 20120227162925 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 S 20120227162929 SHABZ BasisTrn3 20120227162821661
STOP DISTRIBUTION OF DD-O NG1 S 20120227162929 SHABZ BasisTrn3 20120227162821661
INFO TBATG CONVERSION OF NG1 N not needed SHABZ BasisTrn3 20120227162821661
START MOVE NAMETABS NG1 6 20120227162929 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 P 20120227162929 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 P 20120227162935 SHABZ BasisTrn3 20120227162821661
STOP MOVE NAMETABS NG1 6 20120227162936 SHABZ BasisTrn3 20120227162821661
START MAIN IMPORT NG1 I 20120227162936 SHABZ BasisTrn3 20120227162821661
STOP MAIN IMPORT NG1 I 20120227163023 SHABZ BasisTrn3 20120227162821661
START TBATG CREATION OF EN NG1 n 20120227163024 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 Y 20120227163024 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 Y 20120227163034 SHABZ BasisTrn3 20120227162821661
STOP TBATG CREATION OF EN NG1 n 20120227163034 SHABZ BasisTrn3 20120227162821661
START EXECUTION OF REPORTS NG1 R 20120227163035 SHABZ BasisTrn3 20120227162821661
START tp_getprots NG1 R 20120227163035 SHABZ BasisTrn3 20120227162821661
STOP tp_getprots NG1 R 20120227163202 SHABZ BasisTrn3 20120227162821661
STOP EXECUTION OF REPORTS NG1 R 20120227163202 SHABZ BasisTrn3 20120227162821661
INFO EXECUTION OF STANDAR NG1 9 not needed SHABZ BasisTrn3 20120227162821661
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all NG1 0004 20120227163203 SHABZ BasisTrn3 20120227162821661
START CMDIMPORT NG1 L 20120227164418 SHABZ BasisTrn3 20120227164416991
STOP CMDIMPORT NG1 L 20120227164454 SHABZ BasisTrn3 20120227164416991
START DD IMPORT NG1 H 20120227165608 SHABZ BasisTrn3 20120227165607479
STOP DD IMPORT NG1 H 20120227170309 SHABZ BasisTrn3 20120227165607479
START DD ACTIVATION NG1 A 20120227170313 SHABZ BasisTrn3
START tp_getprots NG1 J 20120227170313 SHABZ BasisTrn3
STOP tp_getprots NG1 J 20120227171206 SHABZ BasisTrn3
STOP DD ACTIVATION NG1 A 20120227171206 SHABZ BasisTrn3
START imp all NG1 20120227171208 SHABZ BasisTrn3 20120227171207614
INFO: event SAP_IMPORT_START triggered successfully
START DISTRIBUTION OF DD-O NG1 S 20120227171208 SHABZ BasisTrn3 20120227171207614
START tp_getprots NG1 S 20120227171208 SHABZ BasisTrn3 20120227171207614
STOP tp_getprots NG1 S 20120227171303 SHABZ BasisTrn3 20120227171207614
STOP DISTRIBUTION OF DD-O NG1 S 20120227171304 SHABZ BasisTrn3 20120227171207614
START TBATG CONVERSION OF NG1 N 20120227171304 SHABZ BasisTrn3 20120227171207614
START tp_getprots NG1 N 20120227171304 SHABZ BasisTrn3 20120227171207614
STOP tp_getprots NG1 N 20120227171307 SHABZ BasisTrn3 20120227171207614
STOP TBATG CONVERSION OF NG1 N 20120227171307 SHABZ BasisTrn3 20120227171207614
START MOVE NAMETABS NG1 6 20120227171307 SHABZ BasisTrn3 20120227171207614
START tp_getprots NG1 P 20120227171308 SHABZ BasisTrn3 20120227171207614
STOP tp_getprots NG1 P 20120227171755 SHABZ BasisTrn3 20120227171207614
STOP MOVE NAMETABS NG1 6 20120227171755 SHABZ BasisTrn3 20120227171207614
START MAIN IMPORT NG1 I 20120227171756 SHABZ BasisTrn3 20120227171207614
ERROR: RFC function TRINT_PROGRESS_INDICATOR error: SYSTEM_FAILURE
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
STOP MAIN IMPORT NG1 I 20120227195335 SHABZ BasisTrn3 20120227171207614
START TBATG CREATION OF EN NG1 n 20120227195335 SHABZ BasisTrn3 20120227171207614
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
START tp_getprots NG1 Y 20120227195335 SHABZ BasisTrn3 20120227171207614
ERROR: RFC function TRINT_PROGRESS_INDICATOR returned 18
STOP tp_getprots NG1 Y 20120227195521 SHABZ BasisTrn3 20120227171207614
STOP TBATG CREATION OF EN NG1 n 20120227195521 SHABZ BasisTrn3 20120227171207614
INFO EXECUTION OF STANDAR NG1 9 not needed SHABZ BasisTrn3 20120227171207614
INFO: event SAP_IMPORT_STOP triggered successfully
STOP imp all NG1 0903 20120227195522 SHABZ BasisTrn3 20120227171207614 -
DDIC_ACTIVATION ERROR WHILE APPLYING SUPPORT PACKAGE SAPKW35020 IN ECC5.0
Hi Gurus,
I am getting error DDIC_ACTIVATION while applying support package(BW) SAPKW35020 in ECC5.0 with MSSQL database in Windows server.
I am not able to reset the queue, when i tried to reset the queue the system prompting that " cannot reset queue while DDIC_ACTIVATION" phase".
Can you please help to reset the queue and implementing this support package.
Thank you,
Regards,
GaneshPaste the SPAM log here.
Regards,
Nick Loy -
Error in xpras when importing support packages in solution manager
Hello,
We are importing support packages in our solution manager and we begun
the process more than two weeks ago and the process is still running.
I have stopped the system and restarted the import again, but it seems
to be the same. The SP queue is:
SAPK-1507EINSTPL
SAPK-1507FINSTPL
SAPK-1507GINSTPL
SAPK-1507HINSTPL
SAPK-1507IINSTPL
SAPK-1507JINSTPL
SAPKB70015
SAPKA70015
SAPKITL426
SAPKIPYJ7F
SAPKW70017
SAPKU50012
SAPKB70016
SAPKA70016
SAPKITL427
SAPKIBIIP9
SAPK-40012INCPRXRPM
SAPK-40013INCPRXRPM
SAPK-40014INCPRXRPM
SAPKNA7012
SAPKNA7013
and there is an error (rc=12) at the method execution step in package SAPKU50012 or in SAPKB70016.
Now, there is an rc 12, but the queue is running, the import queue hasn't cancelled, but it seems to do nothing. The RDDEXECL job log is:
Job started
Step 001 started (program RDDEXECL, variant , user ID DDIC)
All DB buffers of application server crosol203 were synchronized
Error Building the ENH TreeObject Type:XHObject Name:EH_FJ_FUBA_PARA_VERS
the job was running for 149.332 seconds and at that moment I stopped the sap system. After restating the system I imported the queue again and now, the process has been running for more than 13500 seconds.
We have checked note number 1142410 and all the modifications were already implemented in the system.
Thanks and best regards,
Ana.Hello Sunny,
The problem is still happening. I have read and apply all the threads you suggested, nut they didn't resolve the problem:
I have updated the kernel
I have checked table DRSEG and it has no problems.
I don't have any syntax errors so I haven't run the SGEN as I think it doesn't apply.
After changing the kernel I have started the sap system and the job rddexecl has started itself before running again the SPAM and reimporting the queue.
I already have 6 support packages without running the method execution step and I don't know how much time it will consume.
Regards,
Ana -
Problem with Support Package SAP_BASIS (Error Stop) IMPORT_PROPER
Hi Everyone,
i want to apply Support Pack for SAP_BASIS. Now Its Level is 0009 (ECC 6.0).
i did import the SPs SAPKB70010 and SAPKB70011. We only want until Stack 11.
The test scenario was without an error. But during the Standard scenario there occurred a problem:
SPAM Status: Error Stop
Import Phase: IMPORT_PROPER
I guess there are different reasons:
1) We didn´t make a SPAM update before! it´s still version 7.00/0021.
2) I have no idea if the guy before me made a kernel update.
And now i wanted to update SPAM to version 27. but first i should "repair" this problem because the SAP_BASIS is still in the queue.
Is there a possibility to delete the queue, update SPAM and the Kernel and then try it again with this support package?
We cannot go further than Stack 11!
please help me!Hi,
This is not because of SPAM version nor the upgrade of kernal.If that was a SPAM problem then it will
not allow you to define the queue.
There are some know problems with this basis patches please read the note .Just run the import again this error would not occur.
If this error occurs then post the import logs for further analysis.
Regards,
Vamshi. -
Error in Applying Java support packages through JSPM
Hi All,
While Applying support packages, Package CAF 7.00 SP 13 is through an error
help required.
For detailed information see the log file of the Deploy Service.
07/12/05 21:55:26 - ***********************************************************
Dec 5, 2007 9:55:26 PM Info: End of log messages of the target system.
Dec 5, 2007 9:55:26 PM Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Dec 5, 2007 9:55:26 PM Error: Aborted: development component 'caf/UI/ptn/common'/'sap.com'/'MAIN_APL70VAL_C'/'1497914'/'0', grouped by software component 'CAF'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070809092315''/'0':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/cafUIptn~common..
Reason: Clusterwide exception: Failed to deploy application sap.com/cafUIptn~common. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application sap.com/cafUIptn~common. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Dec 5, 2007 9:55:26 PM Info: Starting to save the repository
Dec 5, 2007 9:55:28 PM Info: Finished saving the repository
Dec 5, 2007 9:55:28 PM Info: Starting: Update: Selected software component 'CAF'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070809092315''/'0' updates currently deployed software component 'CAF'/'sap.com'/'MAIN_APL70P06_C'/'1000.7.00.6.0.20060221161956''/'0'.
Dec 5, 2007 9:55:28 PM Error: Aborted: software component 'CAF'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070809092315''/'0':
Failed deployment of SDAs:
development component 'caf/UI/ptn/common'/'sap.com'/'MAIN_APL70VAL_C'/'1497914'/'0' : aborted
Please, look at error logs above for more information!
Dec 5, 2007 9:55:28 PM Info: Starting to save the repository
Dec 5, 2007 9:55:30 PM Info: Finished saving the repository
Dec 5, 2007 9:55:30 PM Info: Starting: Update: Selected software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070906104634''/'0' updates currently deployed software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70P06_C'/'1000.7.00.6.1.20060302145618''/'0'.
Dec 5, 2007 9:55:30 PM Error: Aborted: software component 'LM-TOOLS'/'sap.com'/'MAIN_APL70VAL_C'/'1000.7.00.13.0.20070906104634''/'0':
No further description found.
Dec 5, 2007 9:55:30 PM Info: Starting to save the repository
Dec 5, 2007 9:55:32 PM Info: Finished saving the repository
Dec 5, 2007 9:55:32 PM Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
Dec 5, 2007 9:55:32 PM Error: -
At least one of the Deployments failed -
Regards,
Prashant.Hello Prashant.
Check this supporting SAP note 1010640. It will solve your problem.
This is typical problem when you upgrade from < SP8 to higher version.
You need to Undeploy the CAF components from the system using SDM first and then reply the patches from JSPM.
It should go with out errors.
Let us know if this worked.
*Reward points for helpful answer.
Regards,
Prashant P. -
Syntax Error while applying support package stack 8
I get the following short dump while I was applying support package stack 8. I'm at the latest saint version 34
Runtime Errors SYNTAX_ERROR
Date and Time 23.07.2009 14:09:27
Short text
Syntax error in program "CL_DYNPRO_PROPERTY_BAG========CP ".
What happened?
Error in the ABAP application program.
The current ABAP program "SAPLSCR2" had to be interrupted because it con
a statement that cannot be executed.
In the include "CL_DYNPRO_PROPERTY_BAG========CM009 " in the line 176 of
program "CL_DYNPRO_PROPERTY_BAG========CP " the following syntax
errors occur:
"The field "SPROP_C_TAG_CUSTOMPROPERTY" is unknown, but there is a fiel"
"d with the similar name "SPROP_C_TAG_TOOLTIPTEXT". "SPROP_C_TAG_TOOLTI"
"PTEXT"."
Author and last person to change the include are:
Author "SAP "
Last changer "SAP "
Error analysis
The following syntax error was found in the program
CL_DYNPRO_PROPERTY_BAG========CP :
"The field "SPROP_C_TAG_CUSTOMPROPERTY" is unknown, but there is a fiel"
"d with the similar name "SPROP_C_TAG_TOOLTIPTEXT". "SPROP_C_TAG_TOOLTI"
"PTEXT"."
Trigger Location of Runtime Error
Program SAPLSCR2
Include LSCR2U47
Row 31
Module type (FUNCTION)
Module Name RS_SCRP_PROP_ADD_TO_PROP_LIST
1 FUNCTION RS_SCRP_PROP_ADD_TO_PROP_LIST.
2 *"----
3 ""Lokale Schnittstelle:
4 *" IMPORTING
5 *" REFERENCE(P_TEXTFIELD) TYPE D021S-FNAM OPTIONAL
6 *" REFERENCE(P_TOOLTIPTEXT_TEXTELEM) TYPE CHAR3 OPTIONAL
7 *" REFERENCE(P_TOOLTIPTEXT_VARIABLE) TYPE D021S-FNAM OPTIONAL
8 *" REFERENCE(P_KEEPTAB) TYPE SEU_BOOL OPTIONAL
9 *" REFERENCE(P_DISABLEIMPLICITLABELS) TYPE SEU_BOOL OPTIONAL
10 *" REFERENCE(P_BARCODEINPUT) TYPE SEU_BOOL OPTIONAL
11 *" CHANGING
12 *" REFERENCE(P_PROP_LIST) TYPE PROP_LIST
13 *"----
14
15 data: l_prop type prop_line,
16 l_prop_list type prop_list,
17 l_string type prop_str.
18
19 * Property TextField
20 * -
21
22 if p_textfield is supplied.
23 clear l_prop_list.
24 clear l_prop.
25 l_prop-name = sprop_c_tag_textfield_name.
26 l_prop-syntax = sprop_c_syntax_content .
27 l_prop-value = p_textfield.
28 append l_prop to l_prop_list.
29 * Zusammensetzen eines Strings der Form
30 * <Name>value_1</Name> ... <Name>value_n</Name>
>> call method cl_dynpro_property_bag=>fill_prop_list_into_properties
32 exporting
33 prop_list = l_prop_list
34 importing
35 properties = l_string.
36 * Property-Eintrag zusammensetzen
37 clear l_prop.
38 l_prop-name = sprop_c_tag_textfield.
39 l_prop-type = sprop_c_type_string.
40 l_prop-syntax = sprop_c_syntax_content .
41 l_prop-value = l_string.
42 * Property-Eintrag in PROP_LIST aufnehmen/ersetzen
43 read table p_prop_list transporting no fields
44 with key name = l_prop-name.
45 if sy-subrc = 0.
46 modify p_prop_list index sy-tabix
47 from l_prop.
48 else.
49 append l_prop to p_prop_list.
50 endif.
Can anyone help me? I now get the same error with executing other transactions as well.Hi,
Please let us know the component which you are trying to apply. Is it BASIS or ABAP or BW and also let us know the version?
I hope you are applying the BW patch 8, as per SAP's recommendation we need to apply both 8 an 9 patch of BW at the same time. If not we need to apply some notes which you could find in the service market place. Once you apply the notes, you can proceed with the SP application.
Regards,
Varadhu
Maybe you are looking for
-
How do I get rid of duplicate "in" and "sent" mail boxes?
I have installed a new version of Thunderbird on a new machine and used Easy Transfer to move my mail boxes etc from my old machine. The problem is that I now have duplicate "in" and "sent" mail boxes. New in and sent mail only appears in one of them
-
Af:treeTable navigator drop down
Hi I am using an af:treeTable control to display some data; this control comes with a navigation control that renders - a "Previous" Link - a Drop Down selector - a "Next" Link the thing is, the dropdown shows the options: 1 - 1 of 3 2 - 2 of 3 3 - 3
-
Maximum Number of tcodes in a role
I would like to know whether there is any SAP reccomendation on the maximum number of tcodes in roles. I have Security consultants colleagues who suggests that the maximum number of SAP transactions in a role must be around 40, though I have not fou
-
SQL 2005 Enterprise Even if I logon as Administrator and try to backup any of my databases to local partitions, I get this error below. I have been operating fine up until this point and doing backups all the time. As far as I know, and after checki
-
Gmail "send mail as" setting not working from iPhone
I added a second gmail account to Mail. This gmail account has the "send mail as" setting set to show a different "from" address than the actual gmail account, and works fine when I send mail from my desktop. When I send mail from that account throug