SPAM : timeout error in DISASSEMBLE phase
I am getting a timeout error while i was updating ST-ICO component my solution manager 7.0 system to level 11 from ST-ICO 150_700 level 10. I have increased the value of parameter "rdisp/max_wprun_time" to 2000 but still the error occurs.
Current SPAM version 7.0/0029
BASIS and ABA on SP 15
Please provide inputs to help resolve this problem.
The error is as follows (ABAP DUMP)
Short text
Time limit exceeded.
What happened?
The program "SAPLOCS_CORE" has exceeded the maximum permitted runtime without
interruption and has therefore been terminated.
Error analysis
After a specific time, the program is terminated to make the work area
available to other users who may be waiting.
This is to prevent a work area being blocked unnecessarily long by, for
example:
- Endless loops (DO, WHILE, ...),
- Database accesses with a large result set
- Database accesses without a suitable index (full table scan)
The maximum runtime of a program is limited by the system profile
parameter "rdisp/max_wprun_time". The current setting is 2000 seconds. If this
time limit is
exceeded, the system attempts to cancel any running SQL statement or
signals the ABAP processor to stop the running program. Then the system
waits another 60 seconds maximum. If the program is then still active,
the work process is restarted.
The program "SAPLOCS_CORE" has exceeded the maximum permitted runtime without
interruption and has therefore been terminated.
Hi,
This is because the way in which memory is allocated to dialog work processes is different to the way it is allocated to non-dialog (background work processes) - and of course then it is restricted by max_wprun_time profile parameter.
As a rule of thumb please run anyhting that has a heavy footprint on the resources always on the background.
Hope this helps.
Thanks, Dibya
Similar Messages
-
Error in Import phase DISASSEMBLE when implementing KB70022
I'm trying to implement XI/PI netweaver 7.00 SAPKB70022 patch:
Always stays in the 'DISASSEMBLE' phase, the following log shows:
Saving the current Queue OCS (17.09.2010, 13: 34: 16)
001: SAPKB70022 - Support Package for SAP_BASIS Release 700
Import of the current Queue OCS (17.09.2010, 13: 34: 24)
The import is done with the standard scenario
The current OCS Queue consists of:
001: SAPKB70022
Import phase 'PROLOGUE' (17.09.2010, 13: 34: 26)
Import phase 'PROLOGUE' was successfully finished (17.09.2010, 13: 34: 26)
Import phase 'CHECK_REQUIREMENTS' (17.09.2010, 13: 34: 26)
Import phase 'CHECK_REQUIREMENTS' was successfully finished (17.09.2010, 13: 34: 28)
Import phase 'DISASSEMBLE' (17.09.2010, 13: 34: 28)
Ever happens here so if done in dialogue in bakcground.
In dialogue always appears in message bar 'tp user check1 and so remains indefinitely until I have to kill the process.
As background, BGD process runs on hold indefinitely...
I also tried to make 'Disassemble support Package' from the menu the SPAM Utilities also runs in the same State and must kill the process.
Decompressing support Package with single sapcar you extract the file:
CSR0120031469_0044188.PAT and never extracts the file .ATT
I several times what I downloaded SAP downloads site and never brings me the file. ATT.
I can not continue with the deployment of patches.
Thank you in advanced for your help.Hi Fernando,
What SPAM/SAINT version do you have installed ?
Ensure it is the latest one.
If you are moving the files, check which method you are using.
Usually the transfer of files should be done with binary mode.
If you do get the data file and then get errors:
Please run the following command to check the datafiles consistency:
R3trans -l <datafile>
If you receive any return code different than 0, the datafile is indeed
corrupted, as the error message suggests (check-sum error in datafile).
Regards,
Paul -
Support Pack upgrade error in Import Phase
Hello,
Currently I am upgrading SCM system with Support pack level 12 to 20 . When i am applying Basis 12 to 20. I got an error in Import_Proper phase.
Could you please help me on this? I tried and still searching solution for this..But no luck...
Os is : AIX and
Log File: /usr/sap/trans/log/SAPIB70013.xxx
Main import
Transport request : SAPKB70013
System : xxxx
tp path : tp
Version and release: 372.04.71 700
child process 934006 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_OBJECT_COLLECTION==========CT
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1212554 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_WDR_APPLICATION_WINDOW=====CT
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1171520 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_WDY_MD_EVENT_SOURCE========CI
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1331412 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_LOAD
tabname: ECSCR_DATA
len (char): 106
key: EC_TEST_DATA 00000000P10 IECATTDEFAULT
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
insert / update sequence failed due to an error in DBI.
maybe there's a concurrent process which inserted this table entry at the same time.
insert / update sequence failed due to an error in DBI.
maybe there's a concurrent process which inserted this table entry at the same time.
child process 1310922 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_END
tabname: WDY_APP_PROPERTY
len (char): 64
key: DEMO_UIEL_DROPDOWN_BY_IDX DEMO_VIEW
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
import portion 018446 - 999999 not imported because the child processes died for unknown reason
child process 1310924 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_report_interface
fcode: CLOSE_LINE_MODE
tabname: SOURCE
len (char): 40
key: CL_WDY_MD_OUTGOING_EVENT======CT
retcode: 1
SQL error -913 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -913, ER
child process 1286192 terminated -> setting rc=12 for this import portion
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_LOAD
tabname: ECSCR_DATA
len (char): 106
key: EC_TEST_DATA 00000000P10 IECATTDEFAULT
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
import portion 009158 - 018411 not imported because the child processes died for unknown reason
import portion 018412 - 018527 not imported because the child processes died for unknown reason
import portion 018528 - 999999 not imported because the child processes died for unknown reason
sap_dext called with msgnr 1:
db call info -
function: db_xrtab
fcode: RT_MI_LOAD
tabname: ECSCR_DATA
len (char): 106
key: EC_TEST_DATA 00000000P10 IECATTDEFAULT
retcode: 1
SQL error -904 accessing : [IBM][CLI Driver][DB2] DSNT408I SQLCODE = -904, ER
Main import
End date and time : 20100909034914
Ended with return code: ===> 12 <===
| ######################################
Thanks and Regards,
Sankar
SAP BASIS ConsultantHi,
Thanks for you reply. I restarted import but no luck still. I activated some object also not working. when i call SPAM it is not going to the SPAM pager. Showing dump...
Runtime Errors CALL_FUNCTION_NOT_FOUND
Except. CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time 10.09.2010 09:41:37
Short text
Function module "POSS_UIREQ_OPT_SUBMIT" not found.
What happened?
The function module "POSS_UIREQ_OPT_SUBMIT" is called,
but cannot be found in the library.
Error in the ABAP Application Program
The current ABAP program "SAPLSTXC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
not caught in
procedure "OPEN_FORM" "(FUNCTION)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program "SAPLSTXC" contains the CALL FUNCTION statement.
The name of the function module to be called is "POSS_UIREQ_OPT_SUBMIT".
No function module exists with the name "POSS_UIREQ_OPT_SUBMIT".
All function modules are listed in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Pay particular attenti
upper/lower case and underscores ("_").
or
b) Transport error
c) In the case of an enqueue/dequeue module,
the lock object may not have been activated
(ABAP/4 Dictionary).
When i tried to check function module it is not there..
Could you please help on this?
Regards,
Sankar Basis Consultant -
Webservice Connection Timeout Error in Sun Java System Application server
I have a java code to connect to Ebay Shopping Webservice that uses the client stub generated through Axis. The code works fine when I run it from the main method of a stand alone Java application. Which means there is no issue with the Proxy settings or any other network setting that could block the webservice from my system. However when I use the same code inside a JSF based Web Application, a connection timeout error comes up. The Web application is deployed on the Sun Java System Application server. The stacktrace of the exception is
java.net.ConnectException: Connection timed out: no further information
at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:527)
at com.sun.enterprise.server.ss.provider.ASClientSocketImpl.connect(ASClientSocketImpl.java:206)
at java.net.Socket.connect(Socket.java:520)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:153)
at org.apache.axis.components.net.DefaultSocketFactory.create(DefaultSocketFactory.java:125)
at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:191)
at org.apache.axis.transport.http.HTTPSender.writeToSocket(HTTPSender.java:404)
at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:138)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165)
at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
at org.apache.axis.client.Call.invoke(Call.java:2767)
at org.apache.axis.client.Call.invoke(Call.java:2443)
at org.apache.axis.client.Call.invoke(Call.java:2366)
at org.apache.axis.client.Call.invoke(Call.java:1812)
at com.ebay.api.soap.ShoppingBindingStub.findProducts(ShoppingBindingStub.java:1217)
at com.shopping.ebay.EbayServiceUtility.performEBaySearch(EbayServiceUtility.java:66)
at searchProduct.SearchProductBean.search(SearchProductBean.java:98)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.el.parser.AstValue.invoke(AstValue.java:151)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
at javax.faces.component.MethodBindingMethodExpressionAdapter.invoke(MethodBindingMethodExpressionAdapter.java:77)
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:96)
at javax.faces.component.UICommand.broadcast(UICommand.java:383)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:450)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:759)
at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:97)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:244)
at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:113)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:244)
at org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:397)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:278)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:240)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:179)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:239)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
The JDK version on my machine is 1.5.0_14. Can somebody point me as where I should be looking for errors?You need to delete all the files under the 'generated' directory to force the server to recompile them after the JDK upgrade. Also check in domain.xml and make sure the JVM parameter is pointing to the JDK that you have installed. It is also worthwhile to check asenv.conf to see which JDK that file is pointing to as well.
-
Timeout error when trying to create repository
Hello,
I'm instaling ovm 3.2.3 and when I try to crete the storage repository from ovm manager I get a timeout error and it stops the creation. I've tried several times, I've reinstalled ovm and manager, but the error is always the same.
I've look into the log but I didn't find anything related to this error. Can somebody help me please?
The content of log is this one:
Job Construction Phase
Job ID: 1370010128786
begin()
Appended operation 'File System Construct' to object '0004fb0000050000d62f8093d31671e2 (fs_repositorio1)'.
Appended operation 'Repository Construct' to object '0004fb00000300005e7bb4e2447294b9 (3600508b1001c5a240ed9f472dfdbb60a)'.
commit()
Completed Step: COMMIT
Objects and Operations
Object (CREATED): [Repository] 0004fb00000300005e7bb4e2447294b9 (repositorio1)
Operation: Repository Construct
Object (CREATED): [LocalFileSystem] 0004fb0000050000d62f8093d31671e2 (fs_repositorio1)
Operation: File System Construct
Object (IN_USE): [StorageElement] 0004fb00001800006d86283bfc68236e (3600508b1001c5a240ed9f472dfdbb60a)
Object (IN_USE): [LocalFileServer] 0004fb0000090000d9ecb1e8a6707a5b (Local FS ovm)
Job Running Phase at 2013-05-31 15:22:08,786
Job Participants: [33:31:39:34:34:32:5a:43:32:31:30:33:30:36:51:34 (ovm)]
Actioner
15:22:09,461: Starting operation 'Repository Construct' on object '0004fb00000300005e7bb4e2447294b9 (repositorio1)'
15:22:09,465: Completed operation 'Repository Construct' with direction ==> LATER
15:22:09,478: Starting operation 'File System Construct' on object '0004fb0000050000d62f8093d31671e2 (fs_repositorio1)'
Job: 1370010128785/1370010128786, aborted post-commit by user: admin
Write Methods Invoked
15:22:08,960 class="InternalJobDbImpl" vessel_id=2960 method=addTransactionIdentifier accessLevel=6 owningTx=1370010128959
15:22:08,992 class="LocalFileServerDbImpl" vessel_id=1364 method=createFileSystem accessLevel=6 owningTx=1370010128959
15:22:09,023 class="LocalFileSystemDbImpl" vessel_id=2969 method=setName accessLevel=6 owningTx=1370010128959
15:22:09,047 class="LocalFileSystemDbImpl" vessel_id=2969 method=setFoundryContext accessLevel=6 owningTx=1370010128959
15:22:09,047 class="LocalFileSystemDbImpl" vessel_id=2969 method=onPersistableCreate accessLevel=6 owningTx=1370010128959
15:22:09,047 class="LocalFileSystemDbImpl" vessel_id=2969 method=setLifecycleState accessLevel=6 owningTx=1370010128959
15:22:09,048 class="LocalFileSystemDbImpl" vessel_id=2969 method=setRollbackLifecycleState accessLevel=6 owningTx=1370010128959
15:22:09,087 class="LocalFileSystemDbImpl" vessel_id=2969 method=setRefreshed accessLevel=6 owningTx=1370010128959
15:22:09,090 class="LocalFileSystemDbImpl" vessel_id=2969 method=setBackingDevices accessLevel=6 owningTx=1370010128959
15:22:09,090 class="LocalFileSystemDbImpl" vessel_id=2969 method=setUuid accessLevel=6 owningTx=1370010128959
15:22:09,090 class="LocalFileSystemDbImpl" vessel_id=2969 method=setPath accessLevel=6 owningTx=1370010128959
15:22:09,090 class="LocalFileSystemDbImpl" vessel_id=2969 method=setSimpleName accessLevel=6 owningTx=1370010128959
15:22:09,091 class="LocalFileSystemDbImpl" vessel_id=2969 method=addFileServer accessLevel=6 owningTx=1370010128959
15:22:09,091 class="LocalFileSystemDbImpl" vessel_id=2969 method=setStorageDevice accessLevel=6 owningTx=1370010128959
15:22:09,092 class="StorageElementDbImpl" vessel_id=1383 method=addLayeredFileSystem accessLevel=6 owningTx=1370010128959
15:22:09,094 class="LocalFileSystemDbImpl" vessel_id=2969 method=setSimpleName accessLevel=6 owningTx=1370010128959
15:22:09,094 class="LocalFileSystemDbImpl" vessel_id=2969 method=addJobOperation accessLevel=6 owningTx=1370010128959
15:22:09,110 class="LocalFileSystemDbImpl" vessel_id=2969 method=createRepository accessLevel=6 owningTx=1370010128959
15:22:09,132 class="RepositoryDbImpl" vessel_id=2975 method=setName accessLevel=6 owningTx=1370010128959
15:22:09,170 class="RepositoryDbImpl" vessel_id=2975 method=setFoundryContext accessLevel=6 owningTx=1370010128959
15:22:09,171 class="RepositoryDbImpl" vessel_id=2975 method=onPersistableCreate accessLevel=6 owningTx=1370010128959
15:22:09,171 class="RepositoryDbImpl" vessel_id=2975 method=setLifecycleState accessLevel=6 owningTx=1370010128959
15:22:09,171 class="RepositoryDbImpl" vessel_id=2975 method=setRollbackLifecycleState accessLevel=6 owningTx=1370010128959
15:22:09,213 class="RepositoryDbImpl" vessel_id=2975 method=setRefreshed accessLevel=6 owningTx=1370010128959
15:22:09,213 class="RepositoryDbImpl" vessel_id=2975 method=setDom0Uuid accessLevel=6 owningTx=1370010128959
15:22:09,213 class="RepositoryDbImpl" vessel_id=2975 method=setSharePath accessLevel=6 owningTx=1370010128959
15:22:09,213 class="RepositoryDbImpl" vessel_id=2975 method=setSimpleName accessLevel=6 owningTx=1370010128959
15:22:09,214 class="RepositoryDbImpl" vessel_id=2975 method=setFileSystem accessLevel=6 owningTx=1370010128959
15:22:09,214 class="LocalFileSystemDbImpl" vessel_id=2969 method=addRepository accessLevel=6 owningTx=1370010128959
15:22:09,215 class="RepositoryDbImpl" vessel_id=2975 method=setManagerUuid accessLevel=6 owningTx=1370010128959
15:22:09,215 class="RepositoryDbImpl" vessel_id=2975 method=setVersion accessLevel=6 owningTx=1370010128959
15:22:09,216 class="RepositoryDbImpl" vessel_id=2975 method=addJobOperation accessLevel=6 owningTx=1370010128959
15:22:09,233 class="RepositoryDbImpl" vessel_id=2975 method=setSimpleName accessLevel=6 owningTx=1370010128959
15:22:09,234 class="RepositoryDbImpl" vessel_id=2975 method=setDescription accessLevel=6 owningTx=1370010128959
15:22:09,248 class="InternalJobDbImpl" vessel_id=2960 method=setCompletedStep accessLevel=6 owningTx=1370010128959
15:22:09,253 class="InternalJobDbImpl" vessel_id=2960 method=setAssociatedHandles accessLevel=6 owningTx=1370010128959
15:22:09,475 class="InternalJobDbImpl" vessel_id=2960 method=setTuringMachineFlag accessLevel=6 owningTx=1370010128959
Job Aborted (Operation)com.oracle.ovm.mgr.api.exception.JobAbortException: OVMAPI_5000E Job: 1,370,010,128,786/1370010128785/Create Repository repositorio1, was aborted [Fri May 31 15:37:11 WEST 2013]
at com.oracle.ovm.mgr.api.job.JobEngine.checkJobStatus(JobEngine.java:642)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:626)
at com.oracle.ovm.mgr.op.physical.storage.FileSystemConstruct.action(FileSystemConstruct.java:57)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAction(ManagedObjectDbImpl.java:1156)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:356)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:333)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:865)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:244)
at com.oracle.ovm.mgr.api.physical.storage.LocalFileSystemProxy.executeCurrentJobOperationAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:230)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:322)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1340)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:356)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:333)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:106)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:92)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:752)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:467)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:525)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
15:22:09,476 class="RepositoryDbImpl" vessel_id=2975 method=setCurrentOperationToLater accessLevel=6 owningTx=1370010128959
15:22:09,477 class="InternalJobDbImpl" vessel_id=2960 method=setTuringMachineFlag accessLevel=6 owningTx=1370010128959
FailedOperationCleanup
Starting failed operation 'File System Construct' cleanup on object 'fs_repositorio1'
Complete rollback operation 'File System Construct' cleanup on object 'fs_repositorio1'
Rollbacker
15:37:11,587: Starting rollbacker...
Executing rollback operation 'File System Construct' on object '0004fb0000050000d62f8093d31671e2 (fs_repositorio1)'
Complete rollback operation 'File System Construct' completed with direction=DONE
15:37:11,600: Rollbacker completed...
Objects To Be Rolled Back
Object (CREATED): [Repository] 0004fb00000300005e7bb4e2447294b9 (repositorio1)
Object (CREATED): [LocalFileSystem] 0004fb0000050000d62f8093d31671e2 (fs_repositorio1)
Object (IN_USE): [LocalFileServer] 0004fb0000090000d9ecb1e8a6707a5b (Local FS ovm)
Object (IN_USE): [StorageElement] 0004fb00001800006d86283bfc68236e (3600508b1001c5a240ed9f472dfdbb60a)
Write Methods Invoked
15:22:08,960 class="InternalJobDbImpl" vessel_id=2960 method=addTransactionIdentifier accessLevel=6 owningTx=1370010128959
15:22:08,992 class="LocalFileServerDbImpl" vessel_id=1364 method=createFileSystem accessLevel=6 owningTx=1370010128959
15:22:09,023 class="LocalFileSystemDbImpl" vessel_id=2969 method=setName accessLevel=6 owningTx=1370010128959
15:22:09,047 class="LocalFileSystemDbImpl" vessel_id=2969 method=setFoundryContext accessLevel=6 owningTx=1370010128959
15:22:09,047 class="LocalFileSystemDbImpl" vessel_id=2969 method=onPersistableCreate accessLevel=6 owningTx=1370010128959
15:22:09,047 class="LocalFileSystemDbImpl" vessel_id=2969 method=setLifecycleState accessLevel=6 owningTx=1370010128959
15:22:09,048 class="LocalFileSystemDbImpl" vessel_id=2969 method=setRollbackLifecycleState accessLevel=6 owningTx=1370010128959
15:22:09,087 class="LocalFileSystemDbImpl" vessel_id=2969 method=setRefreshed accessLevel=6 owningTx=1370010128959
15:22:09,090 class="LocalFileSystemDbImpl" vessel_id=2969 method=setBackingDevices accessLevel=6 owningTx=1370010128959
15:22:09,090 class="LocalFileSystemDbImpl" vessel_id=2969 method=setUuid accessLevel=6 owningTx=1370010128959
15:22:09,090 class="LocalFileSystemDbImpl" vessel_id=2969 method=setPath accessLevel=6 owningTx=1370010128959
15:22:09,090 class="LocalFileSystemDbImpl" vessel_id=2969 method=setSimpleName accessLevel=6 owningTx=1370010128959
15:22:09,091 class="LocalFileSystemDbImpl" vessel_id=2969 method=addFileServer accessLevel=6 owningTx=1370010128959
15:22:09,091 class="LocalFileSystemDbImpl" vessel_id=2969 method=setStorageDevice accessLevel=6 owningTx=1370010128959
15:22:09,092 class="StorageElementDbImpl" vessel_id=1383 method=addLayeredFileSystem accessLevel=6 owningTx=1370010128959
15:22:09,094 class="LocalFileSystemDbImpl" vessel_id=2969 method=setSimpleName accessLevel=6 owningTx=1370010128959
15:22:09,094 class="LocalFileSystemDbImpl" vessel_id=2969 method=addJobOperation accessLevel=6 owningTx=1370010128959
15:22:09,110 class="LocalFileSystemDbImpl" vessel_id=2969 method=createRepository accessLevel=6 owningTx=1370010128959
15:22:09,132 class="RepositoryDbImpl" vessel_id=2975 method=setName accessLevel=6 owningTx=1370010128959
15:22:09,170 class="RepositoryDbImpl" vessel_id=2975 method=setFoundryContext accessLevel=6 owningTx=1370010128959
15:22:09,171 class="RepositoryDbImpl" vessel_id=2975 method=onPersistableCreate accessLevel=6 owningTx=1370010128959
15:22:09,171 class="RepositoryDbImpl" vessel_id=2975 method=setLifecycleState accessLevel=6 owningTx=1370010128959
15:22:09,171 class="RepositoryDbImpl" vessel_id=2975 method=setRollbackLifecycleState accessLevel=6 owningTx=1370010128959
15:22:09,213 class="RepositoryDbImpl" vessel_id=2975 method=setRefreshed accessLevel=6 owningTx=1370010128959
15:22:09,213 class="RepositoryDbImpl" vessel_id=2975 method=setDom0Uuid accessLevel=6 owningTx=1370010128959
15:22:09,213 class="RepositoryDbImpl" vessel_id=2975 method=setSharePath accessLevel=6 owningTx=1370010128959
15:22:09,213 class="RepositoryDbImpl" vessel_id=2975 method=setSimpleName accessLevel=6 owningTx=1370010128959
15:22:09,214 class="RepositoryDbImpl" vessel_id=2975 method=setFileSystem accessLevel=6 owningTx=1370010128959
15:22:09,214 class="LocalFileSystemDbImpl" vessel_id=2969 method=addRepository accessLevel=6 owningTx=1370010128959
15:22:09,215 class="RepositoryDbImpl" vessel_id=2975 method=setManagerUuid accessLevel=6 owningTx=1370010128959
15:22:09,215 class="RepositoryDbImpl" vessel_id=2975 method=setVersion accessLevel=6 owningTx=1370010128959
15:22:09,216 class="RepositoryDbImpl" vessel_id=2975 method=addJobOperation accessLevel=6 owningTx=1370010128959
15:22:09,233 class="RepositoryDbImpl" vessel_id=2975 method=setSimpleName accessLevel=6 owningTx=1370010128959
15:22:09,234 class="RepositoryDbImpl" vessel_id=2975 method=setDescription accessLevel=6 owningTx=1370010128959
15:22:09,248 class="InternalJobDbImpl" vessel_id=2960 method=setCompletedStep accessLevel=6 owningTx=1370010128959
15:22:09,253 class="InternalJobDbImpl" vessel_id=2960 method=setAssociatedHandles accessLevel=6 owningTx=1370010128959
15:22:09,475 class="InternalJobDbImpl" vessel_id=2960 method=setTuringMachineFlag accessLevel=6 owningTx=1370010128959
15:22:09,476 class="RepositoryDbImpl" vessel_id=2975 method=setCurrentOperationToLater accessLevel=6 owningTx=1370010128959
15:22:09,477 class="InternalJobDbImpl" vessel_id=2960 method=setTuringMachineFlag accessLevel=6 owningTx=1370010128959
15:37:11,488 class="LocalFileSystemDbImpl" vessel_id=2969 method=nextJobOperation accessLevel=6 owningTx=1370010128959
15:37:11,488 class="InternalJobDbImpl" vessel_id=2960 method=setFailedOperation accessLevel=6 owningTx=1370010128959
15:37:11,590 class="RepositoryDbImpl" vessel_id=2975 method=nextJobOperation accessLevel=6 owningTx=1370010128959
15:37:11,591 class="LocalFileSystemDbImpl" vessel_id=2969 method=nextJobOperation accessLevel=6 owningTx=1370010128959
15:37:11,591 class="StorageElementDbImpl" vessel_id=1383 method=nextJobOperation accessLevel=6 owningTx=1370010128959
15:37:11,591 class="LocalFileServerDbImpl" vessel_id=1364 method=nextJobOperation accessLevel=6 owningTx=1370010128959
15:37:11,600 class="LocalFileSystemDbImpl" vessel_id=2969 method=nextJobOperation accessLevel=6 owningTx=1370010128959
Completed Step: ROLLBACK
Job Aborted due to OVMAPI_5000E Job: 1,370,010,128,786/1370010128785/Create Repository repositorio1, was aborted [Fri May 31 15:37:11 WEST 2013]
com.oracle.ovm.mgr.api.exception.JobAbortException: OVMAPI_5000E Job: 1,370,010,128,786/1370010128785/Create Repository repositorio1, was aborted [Fri May 31 15:37:11 WEST 2013]
at com.oracle.ovm.mgr.api.job.JobEngine.checkJobStatus(JobEngine.java:642)
at com.oracle.ovm.mgr.api.job.JobEngine.objectAsyncStart(JobEngine.java:626)
at com.oracle.ovm.mgr.op.physical.storage.FileSystemConstruct.action(FileSystemConstruct.java:57)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAction(ManagedObjectDbImpl.java:1156)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:356)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:333)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:865)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:244)
at com.oracle.ovm.mgr.api.physical.storage.LocalFileSystemProxy.executeCurrentJobOperationAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:230)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:322)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1340)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:356)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:333)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:106)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:92)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:752)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:467)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:525)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
End of JobHi,
To create a repository with Oracle VM Manager with NFS share, so the NFS share should have the write privilege.
if the repository with iSCSI so verify your configuration (give it all privilege).
after you verify your configuration and if this solved so good and if still the same error so
thinks to tell us the output of the files /var/log/ovs-agent.log and /var/log/messages
I hope this can help you
Best Regards -
Planning Data Pull process failed with timeout error
Hi Experts,
Version: Oracle apps 11.5.10.2
Issue: Planning Data Pull process failed with timeout error
message in the log file as follows,
The Request id : 90018907 has Phase : COMPLETE and Status: ERROR
Concurrent Message : Timeout error.
There is an Unknown error in the Worker.
Planning Data Pull process failed.
+-------------------------------------
Please advice what could be the problem. I submitted, standard data collection programs with 900 mins and 8 workers.
Refresh Collection Snapshot completed without any issuePlease see these docs.
Data Collection Fails Because Of Time Out Timeout error [ID 339968.1]
OPM-ASCP: Data Collection Timeout Error [ID 601539.1]
STD COLLECTION FAILING AT PLANNING DATA PULL WITH TIMEOUT ERROR [ID 978472.1]
Data Collections is Failing - All Errors - First Diagnostic Steps [ID 207644.1]
Troubleshooting Errors with ATP/Planning Data Collections [ID 1227255.1]
MSCPDC PLANNING ODS LOAD ERRORS WITH TIMEOUT ERROR - POOR PERFORMANCE [ID 417633.1]
Thanks,
Hussein -
TimeOut error while running a report on the report server
Hi,
One of my report is taking 30 minutes to generate the output. It works fine when I run it locally, but when I run it on report server I encounter the following error message. Its a timeout error. Any solution other than tuning the query, please.
500 Internal Server Error
org.omg.CORBA.OBJECT_NOT_EXIST: minor code: 0 completed: No
at java.lang.Class.newInstance0(Native Method)
at java.lang.Class.newInstance(Class.java:237)
at com.inprise.vbroker.orb.SE.read(SE.java:28)
at com.inprise.vbroker.orb.DelegateImpl.handleReply(DelegateImpl.java:711)
at com.inprise.vbroker.orb.DelegateImpl.invoke(DelegateImpl.java:606)
at org.omg.CORBA.portable.ObjectImpl._invoke(ObjectImpl.java:459)
at oracle.reports.server._ConnectionStub.getMainFile(_ConnectionStub.java:1283)
at oracle.reports.client.ReportRunner.getMainFile(ReportRunner.java:488)
at oracle.reports.rwclient.RWReportRunner.getMainFile(RWReportRunner.java:121)
at oracle.reports.rwclient.RWReportRunner.getMainFile(RWReportRunner.java:95)
at oracle.reports.rwclient.RWClient.runReport(RWClient.java:1322)
at oracle.reports.rwclient.RWClient.processRequest(RWClient.java:1139)
at oracle.reports.rwclient.RWClient.doPost(RWClient.java:328)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:283)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:523)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:269)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:735)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind[Oracle9iAS (9.0.2.0.0) Containers for J2EE].util.ThreadPoolThread.run(ThreadPoolThread.java:64)Hi Bhasker
Try setting idleTimeOut under connection element in server configuration file to a large value.
Regards
Sripathy -
Getting timeout error while updating a record from c#
Hi,
I have around 30k records in a tables. When I update that record inside the Transaction (Enterprise Data Library, c#) , it takes long time and throws timeout error.
But I am able to update the same record via Toad.
In the morning I tried same updating the record, it works without any change in the code or script.+
is it due table lock or db related issue? please adivse, how to resolve if occurs again.
anandCode:
private static void Save()
using (DBTransactionManager dbTransactionManager = new DBTransactionManager())
try
DataTableDAL.Instance.ExecuteDML("Update Voyage SET BallastBonus = 30000 WHERE ID = 'AE53B610BEA743EC8AFBAED0C8349BF8';");
//commit database
dbTransactionManager.Commit();
catch
dbTransactionManager.RollBack();
throw;
Table
Column Name ID Pk Null? Data Type Default Histogram Encryption Alg Salt
ID 1 1 N NVARCHAR2 (32) None
CALCNUMBER 2 N NUMBER (10) None
CURRENCYID 3 N NVARCHAR2 (32) Frequency
CALCTYPE 4 N NUMBER (5) Frequency
ESTIMATEDESCRIPTION 5 Y NVARCHAR2 (200) None
ESTIMATEGROUPDESCRIPTION 6 Y NVARCHAR2 (200) None
BALLASTBONUS 7 Y NUMBER (12,2) None
BALLASTBONUSCOMMPCT 8 Y NUMBER (6,3) None
ISESTIMATE 9 N NUMBER (1) None
ADDITIONALSTEAMVALUE 10 Y NUMBER (8,4) None
ISADDITIONALSTEAMPCT 11 Y NUMBER (1) None
ADDITIONALPORTVALUE 12 Y NUMBER (8,4) None
ISADDITIONALPORTPCT 13 Y NUMBER (1) None
CREATEDBY 14 N NVARCHAR2 (32) Frequency
CREATEDDATE 15 N DATE None
UPDATEDBY 16 Y NVARCHAR2 (32) None
UPDATEDDATE 17 Y DATE None
LUMPSUMCARGOCOST 18 Y NUMBER (1) None
BUNKERPRICEMETHOD 19 Y VARCHAR2 (30 Byte) None
INCCONTCALCRESULT 20 Y NUMBER (1) None
FINAL_EST 21 Y NUMBER None
SPOT_VOYAGE 22 Y NUMBER (1) None
ISRUNCOSTEDIT 23 Y NUMBER (1) None
Index
Table doesnt have any index, except primary key index.
Total Records
35,000
Hope this input might sufficient to help me. -
Hi All ,
We are facing error in preprocessing phase of upgrade to EHP 7 ,Let me know if anyone can help us in this critical situation
System details:Oracle 11gr2,Linux x86-64 ,
Below is the error :
During the phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/RFCDEST_CREATE_S2OX in
Pre-processing of the SUM we are facing below error.
1 ETQ233 Calling function module "FUNCTION_EXISTS" by RFC
2 ETQ373 parameter "FUNCNAME" = "RFC_DESTINATION_CREATE"
1 ETQ234 Call of function module "FUNCTION_EXISTS" by RFC succeeded
4 ETQ010 Date & Time: 20140912043336
1 ETQ359 RFC Login to: System="XXX", AsHost="sapXXXpas" Nr="12",
GwHost="sapa10pas", GwService="sapgwZZ"
2 ETQ232 RFC Login succeeded
4 ETQ010 Date & Time: 20140912043336
1 ETQ233 Calling function module "RFC_DESTINATION_CREATE" by RFC
2 ETQ373 parameter "DESTINATION_NAME" = "SAP_UPGRADE_ORIG_SYSTEM"
2 ETQ373 parameter "USER" = "DDIC"
2 ETQ373 parameter "HOST" = "sapXXXpas"
2 ETQ373 parameter "SYSTEMNR" = "11"
2 ETQ373 parameter "CHECK" = "X"
1EETQ235 Call of function module "RFC_DESTINATION_CREATE" by RFC failed
(error-status "3")
2EETQ360 RFC of "RFC_DESTINATION_CREATE" failed:
2EETQ361 code/exception : 3
2EETQ362 key : CALL_FUNCTION_NO_DEST
2EETQ399 RFC destination SAP_UPGRADE_ORIG_SYSTEM does not exist.
Regards
Bharat
Mob No: 91 9008804153Hi Reagan ,
The issue was taken to SAP development security team :::Below is the weird issue ::
Firstly ,for the authorizations to work correctly, all authorization tables must be in a consistent state as below :
ust04, ust10c, ust10s, ust12, usrbf2, usrbf3.
If we want to maintain authorizations, also usr04, usr10, usr12 are required.
But here , a mismatch of tables usrbf2 and usrbf3 in 2 instances are the reason for the stuck in the upgrade :::
SQL> select count(*) from sapsr3.USRBF2 where MANDT = '000' and BNAME =
'DDIC';
COUNT(*)
2997
SQL> select count(*) from sapsr3.USRBF3 where MANDT = '000' and BNAME =
'DDIC';
COUNT(*)
1
SQL>
SQL> select count(*) from sapsr3shd.USRBF2 where MANDT = '000' and
BNAME =
'DDIC';
COUNT(*)
673
SQL> select count(*) from sapsr3shd.USRBF3 where MANDT = '000' and
BNAME =
'DDIC';
COUNT(*)
1
This issue was resolved by SAP and then upgrade went fine ,This is not an issue with password of DDIC !!!!!
Regards
Ram -
Error during upgrade phase JOB_RSUPGCUA_SHD
Hi Everyone,
We are in the process of completing a combined ERP 6.0 Upgrade / Unicode Conversion. Our starting release is ECC 5.0 (ABAP only) and we are running Oracle 10.2.0.2 on AIX 5.3.
We are receiving the following error in phase JOB_RSUPGCUA_SHD:
1 ETQ201XEntering upgrade-phase "JOB_RSUPGCUA_SHD" ("20080812163717")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '56', GwService = 'sapgw56'
4 ETQ399 Environment variables:
4 ETQ399 dbs_ora_schema=SAPR3
4 ETQ399 auth_shadow_upgrade=1
4 ETQ260 Starting batchjob "RSUPGCUAGEN111"
4 ETQ010 Date & Time: 20080812163717
4 ETQ260 Starting batchjob "RSUPGCUAGEN111"
4 ETQ230 Starting RFC Login to: System = "ENP", GwHost = "aix12j1", GwService = "sapgw56"
4 ETQ359 RFC Login to: System="ENP", Nr="56", GwHost="aix12j1", GwService="sapgw56"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
2EETQ235 Call of function module "SUBST_START_BATCHJOB" by RFC failed (error-status "10")
2EETQ261 Start of batchjob "RSUPGCUAGEN111" failed
1EETQ203 Upgrade phase "JOB_RSUPGCUA_SHD" aborted with errors ("20080812163717")
We originally had some issues with the shadow system not starting in phase START_SHDI_FIRST. The source of the problem was the value of paramter ipc/shm_psize_40 in the instance profile of the shadow system. When we ran "sappfpar check" on the profile, the output indicated that the paramter was too small. We backed up the profile, increased the parameter to the value "sappfpar check" recommended and then stopped the shadow system via "SAPup stopshd." We then repeated the phase. The shadow instance was started successfully and the upgrade proceeded with subsequent phases.
We encountered the error above several phases later. The shadow instance is started and I am able to login with user DDIC. As detailed in the error message above, function module SUBST_START_BATCHJOB is aborting with error code 10. Based on what I can interpret from source code of the function module, this seems to indicate that there is a problem with the program values. The SM21 log indicates that "Program name RSUPGCUAGEN111 is invalid."
What do we need to do to get past this error?
Thanks in advance for any assistance,
Tommyefor our case it was that the shadow instance was not completely stsarted, some processes were down, cause the ipc pool 40 was too small, i found the error in the killed work processes.
Probleme resolved as susch. i hope it will help someone.
Regards -
Sometime I can write to the local shared variable through data socket. But sometime cannot. Even though, I still can read/write through shared variable monitor.
The error is in the open socket, said connect to peer timeout. I set timeout to 10s or left blank both not work.
I am using 8.2.1 on vista. The computer has 2 lan ports.
I met almost same case long time ago. I solved it by diable NETBIOS and one of the lan port.
This time, I disabled netbios already. But in vista, seems not able to disable the other lan port.
Any suggestion?hi turbot,
I had same problem of timeout error.just check if system Firewall is on or off if it is on then make it off and then run the program.i don't know how much this will help you,it helped me.
GAK
Gaurav k
CLD Certified !!!!!
Do not forget to Mark solution and to give Kudo if problem is solved. -
Why do i keep getting the "internet connection timeout" error message?
i have been upgrading a few standard itunes albums to itunes plus versions through my 3g mobile broadband connection, while not exactly a fast process, it was working fine until i started to get a backlog of 3 or 4 albums which were waiting in a queue to be downloaded, now every time i do the "check for downloads" option i get the "internet connection timed out" error message...this has been going on for 2 days! am i right in suspecting the backlog of albums is too much for my 3g mobile broadband connection? this is really doing my head in, if any of you techies could help me, it'd be much appreciated...?
yes i have recently updated to itunes 8.2.1, but i am starting to think its apple's servers (i tried to download at my brothers house...different computer and connection...same connection timeout error), because it will still let me download an album, but not necessarily all of the tracks. when i questioned itunes customer services about the seemingly hit and miss state of affairs with downloading, they told me to wait 3 weeks before trying to download the tracks that were giving me the grief (2 tracks from an arctic monkeys album)...which kinda indicates they know there is a problem and are trying to fix it, why else would they say wait 3 wks??? they gave me 5 free music tracks too, which is handy.
-
Frame timeout error using Configure Trigger3.vi
Hi all,
I'm triggering the frame capture of an .avi with an RTSI connection. However, I keep getting a frame timeout error when I use the IMAQ Configure Trigger3.vi. I don't get any timeout errors when I just use the IMAQ Generate Pulse3.vi but I am trying to sync the frame capture to an optical switch. If I just use IMAQ Generate Pulse3.vi, I get a .avi but the frames are completely out of sync with the switch, but if I use both IMAQ Generate Pulse3.vi and Configure Trigger3.vi I get nicely separated images but it takes an age and ends up in a timeout error.
I want to capture e.g. 500 frames, over the course of 2 s - so I've set my frame timeout to be 2000. At my current acquisition rate (31680 Hz per line (1024 pixels)) 500 frames corresponds to a total of 1.578 s (images are 100 pxls in height). This is much less than the total scanning time. Where am I going wrong?
Thanks in advance for your help.
Miika
Attachments:
screen.png 32 KBHey Miika
What are the hardware you are using. These vi's only work with specific hardware and this may be why they are not functioning correctly. For example the Configure trigger3 vi only works with the following PCIe-1427, PCIe-1429, PCe-1430, PCIe-1433.
Matthew Trott
Applications Engineer
National Instruments UK
www.ni.com/ask -
Timeout error while running Report
Hi
All,
Windows 2000
Oracle Report builder 10g
Oracle developer suite 10g
when I had OLD computer i was able to run report more than 10 minutes. Now, I got NEW computer and i am getting TIMEOUT error while running report more than 10 minutes.
Any clue?
Thanks,
VishalAs Fs says it depends on how you're running the report.
If you're running via a server then you need to make the change on that server or amend the URL you are using to run the report to add the enginereponsetimeout parameter.
You can amend this parameter on the server either by using the Application Server Control as I described in my last post or by directly editing the config file. This file will be called <reportservername>.conf and can be found in the oracle_home/reports/conf directory.
In this file look for the engine tag and see if the engineResponseTimeOut property is set.
E.g:
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="20" callbackTimeOut="90000" engineResponseTimeOut="5">
</engine>
This value is in minutes so increase to a time larger than that it takes to run the report.
If instead you're running the report via Report Builder on your own PC then look for a file called rwbuilder.conf in the same location on your PC and make the same change as described above.
If this property isn't in the file then the engine isn't supposed to time out at all so the problem may well be something different. But to discount it try setting to a large value like 30. -
Crystal report server2008 (XI R2): CMC session timeout error
HI
Crystal report server2008 (XI R2): CMC session timeout error
Accessing folders, scheduling reporting or running reports are working fine with Central Management Console (CMC) within the Crystal report server or accessing CMC within VPN machine. But when CMC is accessed through browser from client desktop i.e through proxy URL, users are not able to access folder or personal folders to view any reports even admin user is not able to access folders. When users try to access folder or personal folders it gives session-timeout errors. Within less than a 1 or 2 minutes it is showing session timeout error. Appreciates any one help on this quickly.
Regards,
Patrick RathsPlease post your query to the [Business Objects Enterprise Administration|BI Platform; forum. This forum is dedicated to development and deployment of .Net applications that connect and interact with BusinessObjects Enterprise, BusinessObjects Edge, or Crystal Reports Server. This includes the development of applications using the BusinessObjects Enterprise, Report Application Server, Report Engine, and Web Services SDKs.
BTW., if thi is an important issue, I'd recommend creating a phone case.
Ludek
Edited by: Ludek Uher on Aug 11, 2010 1:58 PM
Maybe you are looking for
-
Workflow Upgrade 4.6C to ECC6 - manual settings during Cutover
Hello Guys, We are upgrading to ECC 6 from 4.6C and we are on release 701 & support pack SAPKB70106. I would like to know which are the "Manual activities" that needs to done during cutover and WHEN should these should be done (eg. before ECC6 upgad
-
13 inch Air screen vs. 13 inch Pro screen
Hello. I'm looking at getting either the 13 inch new Air or the 13 inch Pro. I'm wondering what the practical or observed difference between the screens is given that the air's resolution is better. Has anyone observed the difference or have any opi
-
Analog-Formac-DV? help!
Can anyone help with this? I'm trying to import analog video into Final Cut Pro 3 or imovie HD and getting error messages like "Camera not detected" and "No firewire found". I've disconnected and reconnected all cables several times, but have had no
-
Hi All, I have done a transfer posting against a PO by MB1B Tcode with 541 movement type. Now I want to see all the transter posting against that PO. Is it possible, If yes Please suggest. Thanks a lot Pankaj Garg
-
Management Pack Templates - Unix/Linux Service template error
Hello, When I try to run this template I get the following error. The Page [Microsoft.SystemCenter.CrossPlatform.UI.Authoring.ServiceTemplate.ServiceStateProbePage] in the assembly [Microsoft.SystemCenter.CrossPlatform.UI.Authoring] could not be load