SpamCannibal blocking valid domains.... How do I disable it?

Hello all,
I have been running fine for a few months, and I recently started getting bounce problems stemming from SpamCannibal. I found that when I send email to my mail server from an external account, i get a bounce message on my external account that states that SpamCannibal is blocking this email because my external accounts mail server is a spam server. It isn't, but that's neither here nor there.
After doing some research I have found that many many people have stopped using SpamCannibal due to their higher standards, and I found a few documents on how to disable it in a standard Linux install of SpamAssassin. However, the info isn't valid with regards to a standard Leopard Server install of SpamAssassin as the file exim.conf that is referred to in the other documents does not appear to exist in a Leopard Server environment.
Any suggestions?

the IP and domain are accurate. I talked to the host, and of course they are blaming my servers. I am on a T1, so I don't think that there is another server trying to block email.
Alex, I trust you enough to know that if you say SpamCannibal isn't installed, then SpamCannibal isn't installed.
The message looks like my server is kicking it back, but I wonder if it is something that the host is using to keep their users from using their servers as spam servers. But I am watching my firewall when I test this, and I am not seeing the message come through. Anyways, here is the bounce that I am recieving for what it is worth
When trying to deliver your message, the mail server at
gwa4.webcontrolcenter.xx encountered
problems with the following addresses:
For , Site (southsoundchristian.xx/70.102.95.26) said: 554 5.7.1 Service
unavailable; Client host [63.134.207.20] blocked using bl.spamcannibal.org;
blocked, See:
http://www.spamcannibal.org/cannibal.cgi?page=lookup&lookup=63.134.207.20
For a more detailed explanation see
http://netwinsite.com/surgemail/deliver_failed.htm

Similar Messages

I am trying to block an incoming phone number on my 4g. My provider blocks the calls but I need to disable icloud to try and block text. How do you disable icloud on a 4g

I am trying to block an incoming phone number on my 4s. My provider blocks the voice calls but I need to disable icloud to try and block text. How do you disable icloud on a 4s

i have seen this option..problem being...i dont have access to WIFI i live in the middle of ten buck too! We cant even get internet out here i have to go a friend house to get internet. I was going to try that once i did get to town but was looking for other options here at home frist.

How do I disable a previous apple ID where the email is no longer valid and it has my incorrect birthday?

How do I disable my old apple ID where I have 1) forgotten the password, 2) the email is no longer valid (so they can't send me my password) and 3) it has my incorrect birthday (so I can't answer the security question to have them send me a new password)?
Also, I set up a new apple ID on my iphone, but it won't accept my itunes card. It says I need to complete all the information highlighted in red. However, there is no information highlighted in red. It seems to want me to put in a credit card. Is there any way around this?

You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

Using Photoshop CC, brush tool, pop-up window blocks my workspace. How do I disable?

Using Photoshop CC, brush tool, pop-up window blocks my workspace. How do I disable?

Which operating system are you using?
Are you talking about the floating window that comes up if you right click?

How do I disable those pesky "hover-over" pop ups? I tried the method of right clicking on them and opting out, but it doesn't work. If you guys could add some kind of blocker to your browser, it would be a huge plus!

# Question
How do I disable those pesky "hover-over" pop ups? I tried the method of right clicking on them and opting out, but it doesn't work. If you guys could add some kind of blocker to your browser, it would be a huge plus!

Chris CA wrote:
Did you createa smart playlist? It's purple with a gear icon.
And you set the criteria to
Match rule:
Date added is in the last two weeks?
I tried it, but couldn't get it to work. I think I had trouble with the Rule. I put a Rule in as follows: Data added in the last five hours? I added music (data) but nothing appeared in my Smart Playlist. Oh yes - I named the playlist: Recently Added.
What did I do wrong? Is it necessary to have a question mark at the end of the Rule? I couldn't find anything on how to create a Smart Playlist in Help. There is stuff in there, but it does not go into much detail, i.e., nothing on the proper wording of the Rule.

How can i disable pop up blocker in Safari?

how can I disable pop up blocker in Safari?

Upper left corner (next to the Apple menu).
Click on the word Safari.

How do I disable the pop-up blocker for Android

How do I disable the pop-up blocker for Android

Hi kingkash :-)
if you wish to disable Pop-ups, you can follow these instructions:
Type about:config in the address bar
Search dom.disable_open_during_load and set it to false
To re-enable the Pop-up blocker, set dom.disable_open_during_load to true
I hope you find this information useful.
Cheers

How can I disable my popup blocker on mt iPad?

How can I disable my popup blockers on my ipad2?

go to setting
tap safari
then scroll down
theres a tab under javascript and slide it to off

How can I disable the output of the domain name after a getent request?

I use an iPlanet DS 4.13 to resolve the hostnames to IP-adresses in my company network. I have several scipts in use which use the getent command to resolve name to IP, but if I do a 'getent hosts hostname' I get an output like this:
123.123.123.123 hostname.domainname
How can I disable the output of the domainname? I just want to get back the IP-adress and the hostname?!
Help, please?!

The enrty in Ur DS for name to ip resolution might
have been given in the format "hostname.domainname" for the hostname.so if U remove the domainname it would resolve to the host name only.Check the attribute field in Ur directory server where U've entered the hostname.

How do I disable responding to an 'X-Confirm-Reading-To" header in incoming email?

I am receiving emails with 'X-Confirm-Reading-To:' and 'Notice-Requested-Upon-Delivery-To:' headers. I consider the automatic response to these headers a privacy violation. How can I disable all such "return receipt request" functions?

ok the attached base64text file, which by the way is the message, your provider or your SPAM tool flagged it as spam. With the following report
''X-Ham-Report: Spam detection software, running on the system "harvey.tchmachines.com", has
identified this incoming email as possible spam. The original message
has been attached to this so you can view it (if it isn't spam) or label
similar future email. If you have any questions, see
root\@localhost for details.''
The original html, which incidentally simply says "Whats Up" contains a link to this image http://mxsvr.net/we6xgr4zsjbf/signature.gif. The we6xgr4zsjbf is probably a bas64 representation of your email address, or some other value that he has linked to your email address.
Interestingly when I tried to go to that internet address, my anti virus blocked the attempt with the following message.
'''ESET NOD32 Antivirus - Alert
Access denied !
Details:
Web page:
http://mxsvr.net/we6xgr4zsjbf/signature.gif
Description:
Access to the web page was blocked by ESET NOD32 Antivirus.
The web page is on the list of websites with potentially dangerous content.
Further information at [https://www.virustotal.com/en/domain/mxsvr.net/information/ VirusTotal ]

The windows of the Windows bar are already a form of tabs, so I don't need them in Firefox. How can I disable them completely from Firefox 23?

RE: TABS ARE WINDOWS!
The Windows bar already functions as a tab bar. Those tabs are called "windows." So, I find Firefox tab windows superfluous. How can I disable them completely from Firefox 23? I don't need what is essentially TWO windows bars covering up the entire width of my widescreen monitor's image! I already have a Windows bar at the bottom of my screen and, if I really wanted to, I could change ITS position to the top of the screen, so that it would LOOK like the Firefox tab windows bar. Firefox TABS are, essentially, a superfluous SECOND WINDOWS BAR.
Here are my reasons for why I'd rather use Mozilla's Firefox, than Microsoft's Internet Explorer or Google's Chrome. I love and admire Firefox for Mozilla's intent on good security, for Firefox's Personas add-on, and for Firefox's free use of the Ad-Block add-on which, as you know, has the distinct virtue of reducing screen clutter--the last of which is my motive for wanting to get rid of the SUPERFLUOUS Firefox tabs "windows" bar. I am dreadfully sick of companies forcing miscellaneous bars (mostly representing marketing campaigns trying to sell me something) into my browser (and down my throat) every time I download something. (In case you haven't guessed, I am deliberately referring to your Firefox tabs bar as a "Firefox tabs 'windows' bar," because TABS are WINDOWS!)

Let me clarify even more. The Firefox add-on you mention does not remove "tabs" windows. It only HIDES the "tabs" bar when there is only one "tab" in that window. It DOES NOT end "tabs." It does not turn "tabs" off.
I know this, because, even with the add-on you recommend, the "tabs" bar often re-appears when I open a link, which--for some unknown reason--Firefox defaults to opening in a second "tab" within the same window, rather than putting it in a new Windows bar window. This, of course, disregards what I want to happen.
I want to use my Windows bar to control my windows. I do not want my Firefox browser controlling my windows--which it calls "tabs." Can you tell me how to shut off "tabs?"

How can i disable '+' icon in the toolbar

Hi,
I have one requirement i.e i want to disable '+' button[File-->New] in the toolbar.This button creates a record when i click on this.
My block(Updatable block) should allows updations and insertions so i can't make insert_allowed and update_allowed property to "NO".I tried with
APP_SPECIAL2.ENABLE('FILE.NEW',PROPERTY_OFF); but the + icon is still enabled when i write above code.
How can i disable '+' icon in the toolbar
Thanks in advance,

This is eBusiness-related, maybe ask your question in the EBusiness-forum, maybe here OA Framework

How can I disable window snapping/docking?

Ever since CS4 came out I feel like I've been less productive in Photoshop due to annoying window dock/snapping. Windows are constantly sticking and resizing themselves in ways that blocks the work I am trying to do. Also the main image itself automatically resizes to feet the work space and I find this also an annoyance. This is my main question: How can I disable "sticky" windows?
In fact if there a way to get the old classic skin back that would be great, also...because all the programs in CS4 are missing a handle bar at the top of the window, making it difficult to find a place to click to drag the window around...which also wastes time. Sometimes the classic skin is visible underneath buttons in graphic glitches..
Finally, is there a way to disable hardware acceleration completely? My processor is fast enough that it can complete tasks faster than the latency of accessing the GPU, so hardware acceleration actually slows things down. Also the hardware code has bugs in it that prevents me from opening massive images (eg, 21600 x 21600 image crashes).

Edit, preferences. Everything is there to play with

How do I disable zip folders in Windows 7?

I like to use a third-party archive application, so I really don't like how by default Windows makes zip files expand automatically in Windows Explorer and show up in the folder view.
So... How do I disable zip folders in Windows 7?
In XP and Vista, I was able to find solutions to remove this "feature"
In XP, I simply did...
regsvr32 /u zipfldr.dll
In Vista, I had to remove a couple registry entries:
Windows Registry Editor Version 5.00
; Disable ZIP support in Windows Vista
; restart Windows after applying this patch
[-HKEY_CLASSES_ROOT\CLSID\{E88DCCE0-B7B3-11d1-A9F0-00AA0060FA31}]
[-HKEY_CLASSES_ROOT\CLSID\{0CD7A5C0-9F37-11CE-AE65-08002B2E1262}]
I don't want to guess and delete the wrong registry entries if someone else knows which ones I need to remove.

EDIT - I HAVE FOUND A SOLUTION
After considerable browsing (thank you, Google), I have a solution that works. It is based on fixes for Vista, but works 100% for my Windows 7 64-bit install.
You will need to edit your registry (delete 2 different keys), so I highly recommend you back up your registry or better yet, make an image of your OS drive (probably C:\). I use Norton Ghost 2003 (only from a NG 2003 boot floppy) and have never had a single problem. Norton Ghost does not have to be installed on your system for this to work (in fact, it will stall due to compatibility issues).
First a note regarding the various reg tweaks that are available for download (e.g., "vistaunzip.reg"). These will NOT work - undoubtedly due to ownership/permissions issues.
The following two (2) keys need to be deleted fromthe registry:
For zip files delete the regkey
HKEY_CLASSES_ROOT\CLSID\{E88DCCE0-B7B3-11d1-A9F0-00AA0060FA31}
For cab files delete
HKEY_CLASSES_ROOT\CLSID\{0CD7A5C0-9F37-11CE-AE65-08002B2E1262}
When you try to delete them, you will almost certainly get an "access denied" or "failed" type of message. Before you can delete them, you need to change the permissions/ownership of these two keys. Here is how to do it:
01 - open regedit from the RUN console
02 - navigate to the first key that needs to be deleted (HKEY_CLASSES_ROOT\CLSID\{E88DCCE0- B7B3-11d1-A9F0-00AA0060FA31})
03 - right click on the key and select "Permissions"
04 - click on "Advanced"
05 - click on the "Ownership" tab
06 - in the "change owner to" section, highlight your username
07 - check the box for "replace owner on subcontainers and objects"
08 - click on "Apply"
09 - Click "OK"
10 - Under "Security" tab, highlight your username and check the box for "Allow Full Control" (located mid-menu in the "Permissions For Administrators" section)
11 - click "Apply" and "OK"
12 - you can now delete the registry key. MAKE SURE YOU ARE ON THE CORRECT KEY!
13 - repeat the process for the 2nd key.
14 - reboot (changes will NOT take effect until you reboot
15 - VOILA! NO MORE ZIP FOLDERS! woohoo!
16 - thanks to the original solvers of this problem, whomever they may be.
I would like the same help that deedvd is seeking. How do I DISABLE the
zip folder function? I do NOT want my zip files to appear as "folders".
Why anyone in Redmond thought this was a brilliant idea is beyond me.
It adds to clutter and makes file browsing a lot less enjoyable. I
simply want my zip files to appear as files - with the ".zip"
extension. Just like every other file. The responses to deepdvd were
probably as frustrating to him as they are to me. Changing the default
program for zip files is IRRELEVANT. It only changes whether Windows or
some third party app (7Zip, Izarc, etc) OPENS the files. They continue
to show up as folders. I tried the unregister script (earlier thread)
"Running regsvr32 /u %windir%\system32\zipfldr.dll should be enough to disable zip functionality. Then just run your 3rd party archite application and let it re-register archive files." and it did not work. I got the same error that deeddvd got "The module "C:\Windows\system32\zipfldr.dll" was loaded but the entry-point DllUnregisterServer was not found.
Make sure that "C:\Windows\system32\zipfldr.dll" is a valid DLL or OCX file and then try again."
I would love to find a resolution to this problem. If anyone out there knows how to DISABLE the zipfolder function, please post the solution. I am thanking you in advance.

How can I disable the advancedAntiAliasing with fontswf in sdk

Hi,
in asc2.0 we need 'fontswf' script to embed fonts instead of use .as file directly.
but here is a problem
I cannt disable the advancedAntiAliasing with fontswf ?
because I have found an issue when I set advancedAntiAliasing is true, then the textfield (which font is embeded) antiAliasType doesn't work even type is advanced. I need set advancedAntiAliasing is false (in asc1.0 you can set it by .as file)
now i just set the sharpness and thickness to workaround in used asc2.0
but i think that is not great.
so how can I disable the advancedAntiAliasing with fontswf or any other solution?
thanks
hbb

Hello -
That setting is not fully supported. You can explicitly call it like this:
./compc -include-sources ../samples/test/Main.as -output ../samples/test/Main.swf -advanced-anti-aliasing=true/false
So, that is the compiler option that you want to use in order to disable it. The example I show you here uses the command line tool but it is a valid switch via Flash Builder as well

SpamCannibal blocking valid domains.... How do I disable it?

Similar Messages

Maybe you are looking for