Spamhaus PBL

I have determined that my Verizon IP address is on the Spamhaus PBL list.  Many of my outgoing emails (multiple accounts) are being blocked because they initiate from the "Verizon" listed IP address.  This is a Verizon IP issue.  I don't send SPAM or mass emails.  I have been on the phone with Verizon all day without any results.  No one at Verizon has a clue.  I talked to two outside consultants who were quick to pinpoint the problem but only Verizon can fix it by requesting the IP address be removed from list or give me a new IP address.  After 10 phone calls today, I was told that I would have to email my problem to the whitelist department but that this department could not be contacted by telephone by me or anyone else at Verizon and that it could take a week for them to respond.  No one did anything to help.  I work from home and this is a major problem.  Verizon technical support and customer service are non-existent.  I heard that I can log into my router and change the IP address myself.  Does anyone know how?  I'm sure the "community" knows more than Verizon!  And I'm sure cares more than Verizon! 

My issue is not just with Verizon email.  It is with all my email addresses (verizon and others).  Problem due to my Verizon internet service/IP address showing up on a Spamhaus PBL list.  I'm getting blocked by some mail servers/recipients.  Only Verizon can fix - get it removed with Spamhaus or give me a new IP address.  This is urgent!  It would be nice to "talk" to someone at Verizon who understood the problem and who knew how to fix it.  I am told there is no one to "talk to".  I have to send all my requests online.  I sent online requests and got an automated response which told me nothing.  Verizon needs to remember that the company's future, profitability and employee jobs have a direct correlation to the customer satisfaction & retention.  Verizon needs to empower their people and equip their people to RESOLVE issues.  I have never used a forum or blog before but I have no where else to turn! 

Similar Messages

  • Outgoing messages blocked by some recipients due to Spamhaus PBL

    I've read some related issues about this on the forums, but I haven't found any helpful solutions.
    I am a FiOS customer, but I already have email service set up with other providers, and have no interest in changing my e-mail address(s). In general this works fine.
    Recently however I have found that some receipients, who use spamhaus, are blocking my messages - apparantly because Verizon said that the only way their clients are allowed to send e-mail is through their servers.  The bounce looked something like this (personally identifying information, etc. edited):
    This message was created automatically by mail delivery software.
    A message that you sent could not be delivered to one or more of its recipients. The following addresses failed:
    <<edited>>
    SMTP error from remote server after transfer of mail text:
    host barracuda.acrocorp.com[edited]:
    554 Service unavailable; Client host [mout.perfora.net] blocked by zen.spamhaus.org; http://www.spamhaus.org/query/bl?ip=71.164.000.000 (edited)
    --- The header of the original message is following. ---
    Received: from xxxxxx (pool-71-164-xxx-xxx.sttlwa.fios.verizon.net [edited])
    by mrelay.perfora.net (node=mrus1) with ESMTP (Nemesis)
    id 0MCKl7-1NM9wO0jcv-0097h4; Tue, 24 Nov 2009 16:40:26 -0500
    Return-Path: xxxxxxx
    From: xxxx
    Sender: xxxxxx
    To: xxxxxx
    Date: Tue, 24 Nov 2009 13:40:24 -0800
    Message-ID: <!&!AAAAAAAAAAAYAAAAAAAAAJ9z9bwRctQRnWQA4Jh+J3DCgAAAEAAAANjFkzKkqiFOp/[email protected]>
    MIME-Version: 1.0
    Content-Type: multipart/alternative;
    boundary="----=_NextPart_000_0C0C_01CA6D0B.AE1E9C70"
    X-Mailer: Microsoft Office Outlook 12.0
    Content-Language: en-us
    Thread-Index: AcppU1OkA2KRPgLKRqWWeNYMDLOrpwD+U21Q
    X-Provags-ID: V01U2FsdGVkX1/SPBJQinHX94j0qtDaHOJUZB38JI5NNAAl4Ic
    ktk2YLeUKebUC6fKBM+YvSW1b2YSERJwkbKiD+2F1Nc5UyRs6v
    WMF/kvX2k5L3lbGwKP4miYzEaDQ9gYz
     When reading the information at Spamhaus, I said OK, sounds like I need to use a verizon.net server.  So I set my outgoing server to outgoing.verizon.net, with appropriate credentials (I do have a verizon.net e-mail address, I just don't use it).  This seemed to work, but today when sending to the same recipient, I got the following bounce:
    This report relates to a message you sent with the following header fields:
    Message-id:
    <!&!AAAAAAAAAAAYAAAAAAAAAJ9z9bwRctQRnWQA4Jh+J3DCgAAAEAAAABuM/[email protected]>
    Date: Mon, 30 Nov 2009 20:14:49 -0800
    From: xxxxx
    To: xxxxxx
    Subject: xxxxx
    Your message cannot be delivered to the following recipients:
    Recipient address: [email protected] Reason: SMTP transmission failure has occurred
    Diagnostic code: smtp;554 Service unavailable; Client host [vms173017pub.verizon.net] blocked by zen.spamhaus.org; http://www.spamhaus.org/query/bl?ip=71.164.0.0
    Remote system: dns;barracuda.acrocorp.com (TCP|206.46.173.17|42774|12.111.233.9|25) (barracuda.acrocorp.com ESMTP [26a1cc209bbca0bd7cbebfeeb226aade])
    Now first of all, I find it unacceptable that I need to use Verizon's outgoing mail servers rather than the provider of my choice.  This means that if I have someone over who wants to connect their laptop to our network to send e-mail, they have to reconfigure their e-mail, and I have to give them my credentials, or else create an account for them on verizon.net.  That's just bizzare!
    But now it seems that Verizon is also not even keeping its own data straight with spamhaus!
    Can anyone shed any light on this?  Is there anything I can do to resolve these problems?
    Thank you all!

    You don't need to change your INCOMING email address however you do need to change your outgoing email server address to be the Verizon server.  If you don't do this your email may be refused and treated as spam because it will appear that you are using "relaying" to send mail from fake accounts.
    You now appear to have hit the other problem that sometimes occurs.  It seems that at some point in the past the dhcp address you recived from verizon was blacklisted for something and spamhaus is now rejecting the email.  The simple answer to this is to reboot your verizon router to get a new address.  You could then report the blacklisted address to Verizon who might fight the adress issue with spamhaus or you could di it yourself.  Think I had this occur 3 times in the 5 years I had Verizon dsl on a pppoe connection which delivers dhcp address changes many more times than FiOS does.

  • Error message ATLAS 2503 saying that "spamhaus" has blocked this email. Can anyone help?

    I've been in contact with my provider 123 reg. And they have checked the webmail and I can send messages through that way.
    However, when I go back to thunderbird I get this error message every time I try to email.
    I've removed my email address account from thunderbird then entered all the info again, changed my password. But nothing.
    No idea what would help now and 123reg are saying it's fine now.

    When you follow the instructions in the error message this is what you see.
    '''Important: If you are using any normal email software (such as Outlook, Entourage, Thunderbird, Apple Mail, etc.) and you are being blocked by this Spamhaus PBL listing when you try to send email, the reason is simply that you need to turn on "SMTP Authentication" in your email program settings. For help with SMTP Authentication or ways to quickly fix this problem '''
    If this does not fix the issue your need to have the owners of the IP address get it fixed. The IP address comes back to Sky Broadband in GB.
    Here is the link to the Spamhaus page.
    http://www.spamhaus.org/pbl/query/PBL1550975

  • What is Undelivered mail returned to sender spamhaus?

    My emails, intermittently, whether being sent from my macbook or my iphone 5 are coming back saying connections not accepted from IP addresses on Spamhaus PBL
    I have gmail.  I don't know whether the problem is my apple products or my gmail.
    Thank you.

    This is 'some' of the language I receive in bounced back emails I've sent:
    <[email protected]>: host
       mx.abelmonteandson.com.cust.b.hostedemail.com[64.98.36.4] refused to talk
       to me: 554 5.7.1 Service unavailable; Client host [173.203.205.160] blocked
       using urbl.hostedemail.com;
       http://www.spamhaus.org/query/bl?ip=173.203.205.160
    Reporting-MTA: dns; mxout2.codelock.com
    X-Postfix-Relay-Hub-Queue-ID: 37A3E704AD
    X-Postfix-Relay-Hub-Sender: rfc822; [email protected]
    Arrival-Date: Tue, 22 Apr 2014 11:33:37 -0400 (EDT)
    Final-Recipient: rfc822; [email protected]
    Original-Recipient: rfc822;[email protected]
    Action: failed
    Status: 4.7.1
    Remote-MTA: dns; mx.abelmonteandson.com.cust.b.hostedemail.com
    Diagnostic-Code: smtp; 554 5.7.1 Service unavailable; Client host
       [173.203.205.160] blocked using urbl.hostedemail.com;
       http://www.spamhaus.org/query/bl?ip=173.203.205.160

  • SMTP-auth via mailx results in service unavailable

    Why do my attempts to use mailx with Gandi SMTP fail with 'Service unavailable'?
    I have the following ~/.mailrc file which is recognised by mailx:
    set smtp=smtps://mail.gandi.net:465
    set smtp-auth=login
    set smtp-auth-user=harry@XXXXXXX
    set smtp-auth-password=XXXXXXX
    set from=harry@XXXXXXX
    set ssl-verify=ignore
    set nss-config-dir=/Users/neville/Thunderbird
    The result is below.
    From MAILER-DAEMON  Thu Dec 20 15:41:47 2012
    Return-Path: <>
    X-Original-To: [email protected]
    Delivered-To: [email protected]
    Received: by G4-N-2.local (Postfix)
              id D4E2DA382D6; Thu, 20 Dec 2012 15:41:47 +0000 (GMT)
    Date: Thu, 20 Dec 2012 15:41:47 +0000 (GMT)
    From: [email protected] (Mail Delivery System)
    Subject: Undelivered Mail Returned to Sender
    To: [email protected]
    Auto-Submitted: auto-replied
    MIME-Version: 1.0
    Content-Type: multipart/report; report-type=delivery-status;
              boundary="78E73A382D4.1356018107/G4-N-2.local"
    Message-Id: <[email protected]>
    This is a MIME-encapsulated message.
    --78E73A382D4.1356018107/G4-N-2.local
    Content-Description: Notification
    Content-Type: text/plain; charset=us-ascii
    This is the mail system at host G4-N-2.local.
    I'm sorry to have to inform you that your message could not
    be delivered to one or more recipients. It's attached below.
    For further assistance, please send mail to postmaster.
    If you do so, please include this problem report. You can
    delete your own text from the attached returned message.
                       The mail system
    <neville@XXXXXXX>: host spool.mail.gandi.net[217.70.184.6] said: 554 5.7.1
        Service unavailable; Client host [XXXXXXX] blocked using
        pbl.spamhaus.org; http://www.spamhaus.org/query/bl?ip=XXXXXXX (in
        reply to RCPT TO command)
    --78E73A382D4.1356018107/G4-N-2.local
    Content-Description: Delivery report
    Content-Type: message/delivery-status
    Reporting-MTA: dns; G4-N-2.local
    X-Postfix-Queue-ID: 78E73A382D4
    X-Postfix-Sender: rfc822; [email protected]
    Arrival-Date: Thu, 20 Dec 2012 15:41:47 +0000 (GMT)
    Final-Recipient: rfc822; neville@XXXXXXX
    Action: failed
    Status: 5.7.1
    Remote-MTA: dns; spool.mail.gandi.net
    Diagnostic-Code: smtp; 554 5.7.1 Service unavailable; Client host
        [XXXXXXX] blocked using pbl.spamhaus.org;
        http://www.spamhaus.org/query/bl?ip=XXXXXXX
    --78E73A382D4.1356018107/G4-N-2.local
    Content-Description: Undelivered Message
    Content-Type: message/rfc822
    Received: by G4-N-2.local (Postfix, from userid 501)
              id 78E73A382D4; Thu, 20 Dec 2012 15:41:47 +0000 (GMT)
    To: neville@XXXXXXX
    Subject: test
    Message-Id: <[email protected]>
    Date: Thu, 20 Dec 2012 15:41:47 +0000 (GMT)
    From: [email protected] (Neville Hillyer)
    test email
    --78E73A382D4.1356018107/G4-N-2.local--

    http://www.spamhaus.org says:
    Mail servers only run spam filters such as Spamhaus PBL on port 25, so if you find you are being blocked by the PBL when you try to send mail to your mail server that means you are not communicating with the mail server on the 'authenticated' port 587 but you're still on port 25. This means your 'SMTP Authentication' is not working correctly.
    http://wiki.gandi.net/en/mail/standard-settings#smtp-account says:
    SMTP Account
    Name server : mail.gandi.net
    Port : 25, 465 (with SSL) or 587 (try one or the other)
    TLS or SSL: yes
    SMTP Authentication : yes, using the same settings as for the POP / IMAP account
    I was trying to use the same settings I have used for several years with Thunderbird and Apple Mail, ie SSL on port 465.
    Is there something wrong with my settings which could be preventing mailx from using port 465?
    A few debug tips would be appreciated.
    Your link causes me to ask:  Does the mailx on Leopard support SMTP directly?

  • Exchange 2010 - Method to send e-mail when the WAN IP is dynamic

    Hello,
    I am writing due to the fact that I cannot send e-mail from my Exchange 2010 Server to my Yahoo! address for testing. When trying to do so, I get the following error message:
    mta1106.mail.gq1.yahoo.com gave this error:
    Mail from xxx.xxx.xxx.xxx not allowed - 5.7.1 [BL21] Connections not accepted from IP addresses on Spamhaus PBL; see
    http://postmaster.yahoo.com/errors/550-bl21.html [550]
    As one can see, because my IP address is residential, I cannot send e-mail to all addresses on the web. I really would like to use this as my primary contact, and thought of using a proxy. Can someone recommend a good proxy, or workaround for this? I am
    sorry for posting in Exchange 2013, but I couldn't find the 2010 forum. Thank you to all who reply.
    Mike

    Thank you for your reply,
    I have set up DynDNS, and I am currently using my own domain name. The problem was I needed to configure a smart SMTP host, or relay server on my send connector. I decided to go with SMTP2GO, as they are cheap, and allow you to send 20 e-mails a day for
    free. When the money is right, I plan to upgrade.
    Thank you for your help.
    Mike

  • CCMS Monitor for SMTP-Service via ICM SMTP-Plugin

    Dear all,
    we configured our SAP System for sending emails with the help of transaction SCOT. We are using the SMTP-Plugin brought in by the ICM. Everything works fine. Now we want to report how many emails are sent through that connection. For that we want to connect the SMTP-Plugin to the CCMS. Since I havn't found any documentation of that (the existing documentation is discussing how to configure an ordinary SCOT connection for CCMS), I'd like to ask somebody for help. 
    thanks in advance
    best regards
        Thomas Wetzler

    http://www.spamhaus.org says:
    Mail servers only run spam filters such as Spamhaus PBL on port 25, so if you find you are being blocked by the PBL when you try to send mail to your mail server that means you are not communicating with the mail server on the 'authenticated' port 587 but you're still on port 25. This means your 'SMTP Authentication' is not working correctly.
    http://wiki.gandi.net/en/mail/standard-settings#smtp-account says:
    SMTP Account
    Name server : mail.gandi.net
    Port : 25, 465 (with SSL) or 587 (try one or the other)
    TLS or SSL: yes
    SMTP Authentication : yes, using the same settings as for the POP / IMAP account
    I was trying to use the same settings I have used for several years with Thunderbird and Apple Mail, ie SSL on port 465.
    Is there something wrong with my settings which could be preventing mailx from using port 465?
    A few debug tips would be appreciated.
    Your link causes me to ask:  Does the mailx on Leopard support SMTP directly?

  • BigPond - Mail from your ISP is temporarily rejected due to DNS Block List

    I've been trying to send mail to people who have Bigpond.com email addresses and received the following message concerning the unable to deliver the emails. For some reason, Mac.com is being seen as a spam address and is currently blocked.
    Who at Mac.Com can following the instructions below to resolve the problem which are relatively straight forward, but it's not a specific mac issue, but their mail servers
    Anybody through any light on how to get Mac.com to investigate the problem?
    ----- Transcript of session follows -----
    ... while talking to extmail.bigpond.com.:
    MAIL From:<[email protected]> SIZE=318276
    <<< 451 Mail from your ISP is being temporarily rejected due to a DNS block list. Your ISP can resolve this issue. More information is here <a class="jive-link-external-small" href="http://">http://bigpond.custhelp.com/cgi-bin/bigpond.cfg/php/enduser/stdadp.php?pfaqid=12829
    <[email protected]>... Deferred: 451 Mail from your ISP is being temporarily rejected due to a DNS block list. Your ISP can resolve this issue. More information is here http://bigpond.custhelp.com/cgi-bin/bigpond.cfg/php/enduser/stdadp.php?pfaqid=12829
    Warning: message still undelivered after 4 hours
    Will keep trying until message is 4 days old
    
    Reporting-MTA: dns; smtpoutm.mac.com
    Arrival-Date: Sun, 30 Sep 2007 03:12:48 -0700 (PDT)
    Final-Recipient: RFC822; [email protected]
    Action: delayed
    Status: 4.3.0
    Diagnostic-Code: SMTP; 451 Mail from your ISP is being temporarily rejected due to a DNS block list. Your ISP can resolve this issue. More information is here http://bigpond.custhelp.com/cgi-bin/bigpond.cfg/php/enduser/stdadp.php?pfaqid=12829
    Last-Attempt-Date: Sun, 30 Sep 2007 08:07:49 -0700 (PDT)
    Will-Retry-Until: Thu, 4 Oct 2007 03:12:48 -0700 (PDT)

    Resolving such issues can be complex. It is important to recognize that you've done nothing wrong.
    The bounces occur because your ISP has chosen to subscribe to a blocking list maintained by one of several such services. In your case, BigPond is querying the Trend Micro MAPS RBL list each time it receives inbound smtp transactions, and for some reason, addresses or address ranges assigned to .Mac mail for such traffic have been added to this MAPS RBL.
    BigPond can do nothing, really, but sever its link to MAPS, and is highly unlikely to do so. Beyond reporting the issue to Apple as indicated above via .Mac support using the web form located here, there is really nothing you can do. It is up to MAPS to remove the block based upon a request from Apple.
    This sort of relative stupidity occurs quite frequently. We have chosen to use the services of spamhaus.org to limit SPAM on our internally operated mail server, and face the same issue with mail originating through domains maintained by T-Mobile, who has unfortunately found themselves on the Spamhaus PBL, or policy block list. I haven't been able to locate someone at T-Mobile responsible for resolving the issue, so mail originating outside our domain via T-Mobile HotSpots or the T-Mobile cellular data network—traffic that is legitimately relayed through our server to users outside our subnet—is blocked.
    While I generally applaud the efforts of SPAM blocking services like MAPS and Spamhaus, I am beginning to believe that the unintended consequences of their services negate the value they otherwise provide. And, they operate with impunity and are unwilling to talk to affected users or notify sanctioned providers on behalf of affected users. They simply add the offending addresses to their many block lists, and leave it to others to correct what they see as a violation.

  • My own servers pop3 is blocked

    I have a website and a mail server.
    Over the last few days I am getting failed login responses and failed authentication from it, yet it works from the webmail page sometimes.The mail program settings have not been changed and are correct as it sometimes but rarely POPs ok, but fails to SMTP.
    Does BT block third party pop accounts?
    I ask because I find my BT IP adress is listed on the spamhaus PBL, and my hosting company heartinternet say the server is responding OK when tested.
    Solved!
    Go to Solution.

    on further searches I find my IP adresss is blacklisted at 3 places
    http://www.mxtoolbox.com/SuperTool.aspx?action=blacklist%3a81.159.49.98
    How can I get it removed or change it?
    I can no longer access my pop3 server and a few webpages including webmail to my own server fail to respond.
    Quote from my Hosting company (Heart internet) support:
    ...[ You really need to speak to a senior member of support at BT (I fear the 1st level support you may first get through to may not have the required knowledge to adequately answer and resolve this) to get these blacklistings removed or better - assign you a new IP address that isn't blocked.]...
    Who do I contact please?

  • What to do with lame .cn MTAs?

    We need to receive mail from an unspecified and possibly quite wide range of Chinese IP addresses.
    Judging by the domains I've been asked to check, our boxes are quite justified in dropping the connections. The MXs I'm tracing have all sorts of problems; missing or incorrect PTRs, Spamhaus PBL listings, and one is coming up as technically lame. These are of course just the receiving points; under the circumstances I strongly suspect the senders are using dynamic addresses. Yes, I realise that the next step is to try to establish as narrow a window for one of the dropped connections then wade through the connection log so I can confirm this suspicion.
    My question to the group is discover what other IronPort customers do in these circumstances.
    The sheer number of connections we receive generally mean we can't switch off reputation filtering; our boxes would collapse under the load. I can whitelist known problem ranges then depend on CASE and my content rules to hold the tsunami at bay, but my quarantines and off-box arrangements may well be overwhelmed even if the work queue doesn't over-extend as a result.
    Is anyone aware of any general figures for (a) the size and range of addresses allocated to the PRC, and (b) the average volume of spam I might expect from that space?

    If you cannot simply drag the iDisk icon to the Trash you presumably have iDisk Syncing turned on. Go to System Preferences>MobileMe>iDisk and turn iDisk syncing off. Then go to the Account pane and sign out. You can't remove the MobileMe Preference Pane: I would expect it to be removed sooner or later in an update.

  • Does Google Pubilic DNS block Spamhaus RDNSBL queries?

    Our ISP here in Northwest Arizona is CableONE.  We noticed late last year some problems with some of their DNS resolving servers and decided to cut over, as whole, to using Google's Public DNS servers (8.8.8.8 and 8.8.4.4 respectively).  We didn’t realize this at the time of the cutover (11/11/2010), but this had the effect of killing our ability to use Spamhaus for RDNSBL-based rejection of incoming spam.
    We specifically use zen.spamhaus.org and bl.spamcop.net for RDNSBL spam rejection (as set in Server Admin under “Mail > Settings > Relay > Use these junk mail rejection servers (real-time blacklist)”.  Both of these servers had been working well for years, but after the cutover to GoogleDNS we found that Zen wasn’t blocking any spam any more, and there was a corresponding tenfold jump in the amount of rejections triggered by SpamCop.  This makes sense since SpamCop was now taking up the slack for the other service.  We didn't realize this in November 2010, but only now as we retroactively searched the mail server logs from last year.
    This issue can be demonstrated using the shell commands below.  The bottom line is that through Google's two public DNS servers, the Spamhaus queries *never* show the host as listed, whereas on the four CableONE DNS resolvers they *always* show proper results.  There could also be timing issue having to do with how long it takes older RDNSBL queries to time out.  I wonder if anyone can confirm these results; if not we may be dealing with a local DNS cache poisoning in Google’s public DNS servers, but I can’t imagine that this problem has persisted for a whole five months!!  What I suspect is the case is that Google has a policy where RDNSBL is not supported (or properly handled) on their public DNS servers.
    Comments?  Thoughts?  …I’d be interested if anyone else has this problem.  It’s purely a DNS issue, not specific to OS X Server, but it would obviously affect all flavors of OS X Server, not just SL server 10.6.x.
    Here's a shell session illustrating the situation.  I’m testing using the address 186.136.114.186, which is an address currently blocked by SpamCop, and the XBL listing on Spamhaus (and also the SBL-XBL and ZEN composite lists as a result).  I apologize if this a host you’re responsible for, I’m just choosing this host as an example to test against.  You can contact SpamCop and Spamhaus to find out why you're being blacklisted; that is outside of what I'm concerned about.
    bert-sierras-imac:~ bert$ test=186.114.136.186
    bert-sierras-imac:~ bert$ hosts='bl.spamcop.net sbl.spamhaus.org pbl.spamhaus.org xbl.spamhaus.org sbl-xbl.spamhaus.org zen.spamhaus.org'
    bert-sierras-imac:~ bert$ dns='8.8.8.8 8.8.4.4 24.116.0.201 24.116.0.202 ns1.cableone.net ns2.cableone.net'
    bert-sierras-imac:~ bert$ for d in $dns; do echo; echo ====== DNS = $d =======;     for h in $hosts; do host $test.$h $d; done; done
    ====== DNS = 8.8.8.8 =======
    Using domain server:
    Name: 8.8.8.8
    Address: 8.8.8.8#53
    Aliases:
    186.114.136.186.bl.spamcop.net has address 127.0.0.2
    Using domain server:
    Name: 8.8.8.8
    Address: 8.8.8.8#53
    Aliases:
    Host 186.114.136.186.sbl.spamhaus.org not found: 3(NXDOMAIN)
    Using domain server:
    Name: 8.8.8.8
    Address: 8.8.8.8#53
    Aliases:
    Host 186.114.136.186.pbl.spamhaus.org not found: 3(NXDOMAIN)
    Using domain server:
    Name: 8.8.8.8
    Address: 8.8.8.8#53
    Aliases:
    Host 186.114.136.186.xbl.spamhaus.org not found: 3(NXDOMAIN)
    Using domain server:
    Name: 8.8.8.8
    Address: 8.8.8.8#53
    Aliases:
    Host 186.114.136.186.sbl-xbl.spamhaus.org not found: 3(NXDOMAIN)
    Using domain server:
    Name: 8.8.8.8
    Address: 8.8.8.8#53
    Aliases:
    Host 186.114.136.186.zen.spamhaus.org not found: 3(NXDOMAIN)
    ====== DNS = 8.8.4.4 =======
    Using domain server:
    Name: 8.8.4.4
    Address: 8.8.4.4#53
    Aliases:
    186.114.136.186.bl.spamcop.net has address 127.0.0.2
    Using domain server:
    Name: 8.8.4.4
    Address: 8.8.4.4#53
    Aliases:
    Host 186.114.136.186.sbl.spamhaus.org not found: 3(NXDOMAIN)
    Using domain server:
    Name: 8.8.4.4
    Address: 8.8.4.4#53
    Aliases:
    Host 186.114.136.186.pbl.spamhaus.org not found: 3(NXDOMAIN)
    Using domain server:
    Name: 8.8.4.4
    Address: 8.8.4.4#53
    Aliases:
    Host 186.114.136.186.xbl.spamhaus.org not found: 3(NXDOMAIN)
    Using domain server:
    Name: 8.8.4.4
    Address: 8.8.4.4#53
    Aliases:
    Host 186.114.136.186.sbl-xbl.spamhaus.org not found: 3(NXDOMAIN)
    Using domain server:
    Name: 8.8.4.4
    Address: 8.8.4.4#53
    Aliases:
    Host 186.114.136.186.zen.spamhaus.org not found: 3(NXDOMAIN)
    ====== DNS = 24.116.0.201 =======
    Using domain server:
    Name: 24.116.0.201
    Address: 24.116.0.201#53
    Aliases:
    186.114.136.186.bl.spamcop.net has address 127.0.0.2
    Using domain server:
    Name: 24.116.0.201
    Address: 24.116.0.201#53
    Aliases:
    Host 186.114.136.186.sbl.spamhaus.org not found: 3(NXDOMAIN)
    Using domain server:
    Name: 24.116.0.201
    Address: 24.116.0.201#53
    Aliases:
    Host 186.114.136.186.pbl.spamhaus.org not found: 3(NXDOMAIN)
    Using domain server:
    Name: 24.116.0.201
    Address: 24.116.0.201#53
    Aliases:
    186.114.136.186.xbl.spamhaus.org has address 127.0.0.4
    Using domain server:
    Name: 24.116.0.201
    Address: 24.116.0.201#53
    Aliases:
    186.114.136.186.sbl-xbl.spamhaus.org has address 127.0.0.4
    Using domain server:
    Name: 24.116.0.201
    Address: 24.116.0.201#53
    Aliases:
    186.114.136.186.zen.spamhaus.org has address 127.0.0.4
    ====== DNS = 24.116.0.202 =======
    Using domain server:
    Name: 24.116.0.202
    Address: 24.116.0.202#53
    Aliases:
    186.114.136.186.bl.spamcop.net has address 127.0.0.2
    Using domain server:
    Name: 24.116.0.202
    Address: 24.116.0.202#53
    Aliases:
    Host 186.114.136.186.sbl.spamhaus.org not found: 3(NXDOMAIN)
    Using domain server:
    Name: 24.116.0.202
    Address: 24.116.0.202#53
    Aliases:
    Host 186.114.136.186.pbl.spamhaus.org not found: 3(NXDOMAIN)
    Using domain server:
    Name: 24.116.0.202
    Address: 24.116.0.202#53
    Aliases:
    186.114.136.186.xbl.spamhaus.org has address 127.0.0.4
    Using domain server:
    Name: 24.116.0.202
    Address: 24.116.0.202#53
    Aliases:
    186.114.136.186.sbl-xbl.spamhaus.org has address 127.0.0.4
    Using domain server:
    Name: 24.116.0.202
    Address: 24.116.0.202#53
    Aliases:
    186.114.136.186.zen.spamhaus.org has address 127.0.0.4
    ====== DNS = ns1.cableone.net =======
    Using domain server:
    Name: ns1.cableone.net
    Address: 24.116.0.206#53
    Aliases:
    186.114.136.186.bl.spamcop.net has address 127.0.0.2
    Using domain server:
    Name: ns1.cableone.net
    Address: 24.116.0.206#53
    Aliases:
    Host 186.114.136.186.sbl.spamhaus.org not found: 3(NXDOMAIN)
    Using domain server:
    Name: ns1.cableone.net
    Address: 24.116.0.206#53
    Aliases:
    Host 186.114.136.186.pbl.spamhaus.org not found: 3(NXDOMAIN)
    Using domain server:
    Name: ns1.cableone.net
    Address: 24.116.0.206#53
    Aliases:
    186.114.136.186.xbl.spamhaus.org has address 127.0.0.4
    Using domain server:
    Name: ns1.cableone.net
    Address: 24.116.0.206#53
    Aliases:
    186.114.136.186.sbl-xbl.spamhaus.org has address 127.0.0.4
    Using domain server:
    Name: ns1.cableone.net
    Address: 24.116.0.206#53
    Aliases:
    186.114.136.186.zen.spamhaus.org has address 127.0.0.4
    ====== DNS = ns2.cableone.net =======
    Using domain server:
    Name: ns2.cableone.net
    Address: 24.119.5.34#53
    Aliases:
    186.114.136.186.bl.spamcop.net has address 127.0.0.2
    Using domain server:
    Name: ns2.cableone.net
    Address: 24.119.5.34#53
    Aliases:
    Host 186.114.136.186.sbl.spamhaus.org not found: 3(NXDOMAIN)
    Using domain server:
    Name: ns2.cableone.net
    Address: 24.119.5.34#53
    Aliases:
    Host 186.114.136.186.pbl.spamhaus.org not found: 3(NXDOMAIN)
    Using domain server:
    Name: ns2.cableone.net
    Address: 24.119.5.34#53
    Aliases:
    186.114.136.186.xbl.spamhaus.org has address 127.0.0.4
    Using domain server:
    Name: ns2.cableone.net
    Address: 24.119.5.34#53
    Aliases:
    186.114.136.186.sbl-xbl.spamhaus.org has address 127.0.0.4
    Using domain server:
    Name: ns2.cableone.net
    Address: 24.119.5.34#53
    Aliases:
    186.114.136.186.zen.spamhaus.org has address 127.0.0.4

    In digging further it seems this is a known issue.  It is not Google DNS that is banning RDNSBL queries to Spamhaus, but rather Spamhaus that does not want queries reaching it from Google's Public DNS servers.  For more info, see the following links:
         http://www.spamhaus.org/faq/answers.lasso?section=DNSBL%20Usage#261
         http://www.mail-archive.com/[email protected]/msg20322.html
         http://www.vistax64.com/sbs-server/263984-exchange-2003-google-dns-imf-connectio n-filtering-rbl-failures.html
    and again here
         http://us.generation-nt.com/answer/exchange-2003-google-dns-imf-connection-filte ring-rbl-failures-help-146139331.html?page=4
    Okay.... so that explains *why* this is happening.  Now I need to figure out what to do about it.
    I’m a bit relucant to switch my mail server to running DNS queries through CableONE because, as I mentioned, we have at least one major client of ours who’s servers aren’t listing properly on CableONE’s DNS resolvers.  We cut our enterprise over to Google Public DNS for that very reason.
    Is there a way to direct *just* the RDNSBL queries to work via CableONE resolvers, while leaving the general resolver settings (at /etc/resolv.conf) alone?  In other words, is there any syntax in Postfix that lets you choose which DNS servers resolve RDNSBL queries (aka RBL queries) without forcing you to choose those resolvers for other mail handling functions?
    Any help and comments would be appreciated.  Thank you in advance.
    Message was edited by: Bert Sierra

  • The DYNAMIC IP address Verizon assigned me is in a range that is BLOCKED at SpamHaus?

    {word filter avoidance} My public IP address is in a range that is blocked? 
    My mail is authenticated! I am providing my Verizon username/password when I send mail out via the outgoing.verizon.net SMTP server. I am doing exactly what Verizon tech support (escalation specialist) told me to do.
    http://www.spamhaus.org/pbl/query/PBL275150
    Outbound Email Policy of Verizon Online for this IP range:
    It is the policy of Verizon Online that unauthenticated email sent from this IP address should be sent out only via the designated outbound mail server allocated to Verizon Online customers. To find the hostname of the correct mail server to use, customers should consult the original signup documentation or contact Verizon Online Technical Support.
    Removal Procedure
    Removal of IP addresses within this range from the PBL is not allowed by the netblock owner's policy.
    About The PBL
    The Spamhaus Policy Block List ("PBL") is an international anti-spam system maintained by The Spamhaus Project in conjunction with Internet Service Providers and is used by Internet networks to enforce inbound email policies. The PBL database lists end-user IP address ranges which should not be delivering unauthenticated email to any mail server except those provided for specifically for that customer's use. The PBL lists only IP addresses (not domains or email addresses).
    For full information on how the PBL operates please see the PBL Home page and the PBL Frequently Asked Questions.
    Message Edited by KaLin on 06-18-2009 07:31 AM

    JennyC wrote:
    Hi, thanks so much-- but this is what it says on the Spamhaus site:
    Outbound Email Policy of Verizon Online for this IP range:
    It is the policy of Verizon Online that unauthenticated email sent from this IP address should be sent out only via the designated outbound mail server allocated to Verizon Online customers. To find the hostname of the correct mail server to use, customers should consult the original signup documentation or contact Verizon Online Technical Support. (http://www.spamhaus.org/pbl/query/PBL270930 )
    I use authentication and tried using different ports but that has had no effect.
    Exactly. You do use authentication. Thats exactly the point. You wouldnt be able to send emails at all if authentiction wasnt turned on so that suggestion by spamhaus is already done. Second, the only port used by verizon email is 587, so the suggestion that you may have another port is out the window as well because if it was anything else, you wouldnt be able to send email either. So it is NONE of those issues. The spamhaus suggestions do not apply as if they were not that way in the first place you wouldnt be able to send any emails via Verizon and would not be having this symptom. The fact that you can send an email in the first place means that all the spamhaus suggestions have already been verified as working.
    Like I said earlier, this is a spamhaus issue at this point. Everything that spamhaus suggested you check has been verified as working on the verizon side.
    The only thing left to try on the verizon side is to get you a new IP and see if spamhaus likes it better.
    The suggestion that the only work around was to use the web interface is a vaild idea because emails sent via the web use a different IP address range than the one used at your house. getting a new IP may help. Otherwise, you will need to contact spamhaus directly
    ====================================================================================
    Error exists between keyboard and chair.

  • SpamHaus XBL listing cleared, however O365 blocking citing SpamHaus

    We have a MailFlow Connector authorizing a HostGator (I know, I know) server to transmit form mail within the domain. For a time, it was listed on SpamHaus under XBL. That listing has been cleared, however it's 24 hours later and O365 is still rejected mail
    from that server citing SpamHaus.
    SMTP -> FROM SERVER:550 5.7.1 Service unavailable; Client host [192.185.4.X] blocked using Spamhaus; To request removal from this list see http://www.spamhaus.org/lookup.lasso
    Meanwhile, SpamHaus is saying "all clear" on it's lookup tool
    192.185.4.X is not listed in the SBL
    192.185.4.X is not listed in the PBL
    192.185.4.X is not listed in the XBL
    Is there a way to clear O365's cache of the XBL or to temporarily disable SpamHaus check and re-enable 24 or 48 hours later once Microsoft is seeing the all clear from SpamHaus?

    Hi,
    As per the description, I understand that the client host was bocked by Spamhaus.
    As far as I know, there is no way on the recipients' end (office 365) to clear this 'cache of the XBL'. Actually, it can take 24-48 hours before it's completely removed, so maybe you will need to wait for more time.
    Regarding "temporarily disable SpamHaus check and re-enable...", I would suggest you check in the forum of
    Office 365 Community which is dedicated for Office 365
    server/admin aspects. Current forum only focus on questions and feedback for Microsoft Office client.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Getting pbl while i am deploying the application in weblogic 10.3

    here is my pbl.
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: weblogic.descriptor.DescriptorException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4a: Expected elements 'precompile-continue@http://www.bea.com/ns/weblogic/weblogic-web-app verbose@http://www.bea.com/ns/weblogic/weblogic-web-app working-dir@http://www.bea.com/ns/weblogic/weblogic-web-app print-nulls@http://www.bea.com/ns/weblogic/weblogic-web-app backward-compatible@http://www.bea.com/ns/weblogic/weblogic-web-app encoding@http://www.bea.com/ns/weblogic/weblogic-web-app exact-mapping@http://www.bea.com/ns/weblogic/weblogic-web-app default-file-name@http://www.bea.com/ns/weblogic/weblogic-web-app rtexprvalue-jsp-param-name@http://www.bea.com/ns/weblogic/weblogic-web-app debug@http://www.bea.com/ns/weblogic/weblogic-web-app compress-html-template@http://www.bea.com/ns/weblogic/weblogic-web-app optimize-java-expression@http://www.bea.com/ns/weblogic/weblogic-web-app' instead of 'noTryBlocks@http://www.bea.com/ns/weblogic/weblogic-web-app' here in element jsp-descriptor@http://www.bea.com/ns/weblogic/weblogic-web-app:<null>
    problem: cvc-complex-type.2.4a: Expected elements 'precompile-continue@http://www.bea.com/ns/weblogic/weblogic-web-app verbose@http://www.bea.com/ns/weblogic/weblogic-web-app working-dir@http://www.bea.com/ns/weblogic/weblogic-web-app print-nulls@http://www.bea.com/ns/weblogic/weblogic-web-app backward-compatible@http://www.bea.com/ns/weblogic/weblogic-web-app encoding@http://www.bea.com/ns/weblogic/weblogic-web-app exact-mapping@http://www.bea.com/ns/weblogic/weblogic-web-app default-file-name@http://www.bea.com/ns/weblogic/weblogic-web-app rtexprvalue-jsp-param-name@http://www.bea.com/ns/weblogic/weblogic-web-app debug@http://www.bea.com/ns/weblogic/weblogic-web-app compress-html-template@http://www.bea.com/ns/weblogic/weblogic-web-app optimize-java-expression@http://www.bea.com/ns/weblogic/weblogic-web-app' instead of 'compilerclass@http://www.bea.com/ns/weblogic/weblogic-web-app' here in element jsp-descriptor@http://www.bea.com/ns/weblogic/weblogic-web-app:<null>
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:234)
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:221)
         at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:146)
         at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:306)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:409)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:759)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:768)
         at weblogic.servlet.internal.WebAppDescriptor.getWeblogicWebAppBean(WebAppDescriptor.java:170)
         at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:1194)
         ... 26 more
    weblogic.application.ModuleException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4a: Expected elements 'precompile-continue@http://www.bea.com/ns/weblogic/weblogic-web-app verbose@http://www.bea.com/ns/weblogic/weblogic-web-app working-dir@http://www.bea.com/ns/weblogic/weblogic-web-app print-nulls@http://www.bea.com/ns/weblogic/weblogic-web-app backward-compatible@http://www.bea.com/ns/weblogic/weblogic-web-app encoding@http://www.bea.com/ns/weblogic/weblogic-web-app exact-mapping@http://www.bea.com/ns/weblogic/weblogic-web-app default-file-name@http://www.bea.com/ns/weblogic/weblogic-web-app rtexprvalue-jsp-param-name@http://www.bea.com/ns/weblogic/weblogic-web-app debug@http://www.bea.com/ns/weblogic/weblogic-web-app compress-html-template@http://www.bea.com/ns/weblogic/weblogic-web-app optimize-java-expression@http://www.bea.com/ns/weblogic/weblogic-web-app' instead of 'noTryBlocks@http://www.bea.com/ns/weblogic/weblogic-web-app' here in element jsp-descriptor@http://www.bea.com/ns/weblogic/weblogic-web-app:<null>
    problem: cvc-complex-type.2.4a: Expected elements 'precompile-continue@http://www.bea.com/ns/weblogic/weblogic-web-app verbose@http://www.bea.com/ns/weblogic/weblogic-web-app working-dir@http://www.bea.com/ns/weblogic/weblogic-web-app print-nulls@http://www.bea.com/ns/weblogic/weblogic-web-app backward-compatible@http://www.bea.com/ns/weblogic/weblogic-web-app encoding@http://www.bea.com/ns/weblogic/weblogic-web-app exact-mapping@http://www.bea.com/ns/weblogic/weblogic-web-app default-file-name@http://www.bea.com/ns/weblogic/weblogic-web-app rtexprvalue-jsp-param-name@http://www.bea.com/ns/weblogic/weblogic-web-app debug@http://www.bea.com/ns/weblogic/weblogic-web-app compress-html-template@http://www.bea.com/ns/weblogic/weblogic-web-app optimize-java-expression@http://www.bea.com/ns/weblogic/weblogic-web-app' instead of 'compilerclass@http://www.bea.com/ns/weblogic/weblogic-web-app' here in element jsp-descriptor@http://www.bea.com/ns/weblogic/weblogic-web-app:<null>'
    weblogic.application.ModuleException: [HTTP:101064][WebAppModule(_auto_generated_ear_:>/ancillary)] Error parsing descriptor in Web appplication "C:\Ancillary\src\web\metadata"
    weblogic.application.ModuleException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4a: Expected elements 'precompile-continue@http://www.bea.com/ns/weblogic/weblogic-web-app verbose@http://www.bea.com/ns/weblogic/weblogic-web-app working-dir@http://www.bea.com/ns/weblogic/weblogic-web-app print-nulls@http://www.bea.com/ns/weblogic/weblogic-web-app backward-compatible@http://www.bea.com/ns/weblogic/weblogic-web-app encoding@http://www.bea.com/ns/weblogic/weblogic-web-app exact-mapping@http://www.bea.com/ns/weblogic/weblogic-web-app default-file-name@http://www.bea.com/ns/weblogic/weblogic-web-app rtexprvalue-jsp-param-name@http://www.bea.com/ns/weblogic/weblogic-web-app debug@http://www.bea.com/ns/weblogic/weblogic-web-app compress-html-template@http://www.bea.com/ns/weblogic/weblogic-web-app optimize-java-expression@http://www.bea.com/ns/weblogic/weblogic-web-app' instead of 'noTryBlocks@http://www.bea.com/ns/weblogic/weblogic-web-app' here in element jsp-descriptor@http://www.bea.com/ns/weblogic/weblogic-web-app:<null>
    problem: cvc-complex-type.2.4a: Expected elements 'precompile-continue@http://www.bea.com/ns/weblogic/weblogic-web-app verbose@http://www.bea.com/ns/weblogic/weblogic-web-app working-dir@http://www.bea.com/ns/weblogic/weblogic-web-app print-nulls@http://www.bea.com/ns/weblogic/weblogic-web-app backward-compatible@http://www.bea.com/ns/weblogic/weblogic-web-app encoding@http://www.bea.com/ns/weblogic/weblogic-web-app exact-mapping@http://www.bea.com/ns/weblogic/weblogic-web-app default-file-name@http://www.bea.com/ns/weblogic/weblogic-web-app rtexprvalue-jsp-param-name@http://www.bea.com/ns/weblogic/weblogic-web-app debug@http://www.bea.com/ns/weblogic/weblogic-web-app compress-html-template@http://www.bea.com/ns/weblogic/weblogic-web-app optimize-java-expression@http://www.bea.com/ns/weblogic/weblogic-web-app' instead of 'compilerclass@http://www.bea.com/ns/weblogic/weblogic-web-app' here in element jsp-descriptor@http://www.bea.com/ns/weblogic/weblogic-web-app:<null>
         at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:1201)
         at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:350)
         at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
         at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
         at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58)
         at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:42)
         at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:615)
         at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
         at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
         at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16)
         at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155)
         at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:197)
         at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:89)
         at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:723)
         at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1190)
         at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:248)
         at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12)
         at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45)
         at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: weblogic.descriptor.DescriptorException: VALIDATION PROBLEMS WERE FOUND
    problem: cvc-complex-type.2.4a: Expected elements 'precompile-continue@http://www.bea.com/ns/weblogic/weblogic-web-app verbose@http://www.bea.com/ns/weblogic/weblogic-web-app working-dir@http://www.bea.com/ns/weblogic/weblogic-web-app print-nulls@http://www.bea.com/ns/weblogic/weblogic-web-app backward-compatible@http://www.bea.com/ns/weblogic/weblogic-web-app encoding@http://www.bea.com/ns/weblogic/weblogic-web-app exact-mapping@http://www.bea.com/ns/weblogic/weblogic-web-app default-file-name@http://www.bea.com/ns/weblogic/weblogic-web-app rtexprvalue-jsp-param-name@http://www.bea.com/ns/weblogic/weblogic-web-app debug@http://www.bea.com/ns/weblogic/weblogic-web-app compress-html-template@http://www.bea.com/ns/weblogic/weblogic-web-app optimize-java-expression@http://www.bea.com/ns/weblogic/weblogic-web-app' instead of 'noTryBlocks@http://www.bea.com/ns/weblogic/weblogic-web-app' here in element jsp-descriptor@http://www.bea.com/ns/weblogic/weblogic-web-app:<null>
    problem: cvc-complex-type.2.4a: Expected elements 'precompile-continue@http://www.bea.com/ns/weblogic/weblogic-web-app verbose@http://www.bea.com/ns/weblogic/weblogic-web-app working-dir@http://www.bea.com/ns/weblogic/weblogic-web-app print-nulls@http://www.bea.com/ns/weblogic/weblogic-web-app backward-compatible@http://www.bea.com/ns/weblogic/weblogic-web-app encoding@http://www.bea.com/ns/weblogic/weblogic-web-app exact-mapping@http://www.bea.com/ns/weblogic/weblogic-web-app default-file-name@http://www.bea.com/ns/weblogic/weblogic-web-app rtexprvalue-jsp-param-name@http://www.bea.com/ns/weblogic/weblogic-web-app debug@http://www.bea.com/ns/weblogic/weblogic-web-app compress-html-template@http://www.bea.com/ns/weblogic/weblogic-web-app optimize-java-expression@http://www.bea.com/ns/weblogic/weblogic-web-app' instead of 'compilerclass@http://www.bea.com/ns/weblogic/weblogic-web-app' here in element jsp-descriptor@http://www.bea.com/ns/weblogic/weblogic-web-app:<null>
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:234)
         at weblogic.descriptor.internal.MarshallerFactory$1.evaluateResults(MarshallerFactory.java:221)
         at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:146)
         at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:306)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:409)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:759)
         at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:768)
         at weblogic.servlet.internal.WebAppDescriptor.getWeblogicWebAppBean(WebAppDescriptor.java:170)
         at weblogic.servlet.internal.WebAppModule.loadDescriptor(WebAppModule.java:1194)
         ... 26 more

    It is really handy to learn how to read schema validation errors. It really does say exactly what's wrong there. If you can get access to the XSD that your XML document is prescribing, you should be able to tell what mistake you made. If you learn how to do this, you'll never have to ask questions like this again. :)
    The error refers to the "http://www.bea.com/ns/weblogic/weblogic-web-app" namespace, which I believe is in your "weblogic.xml" file. It's saying that in the "jsp-descriptor" element, it found a "noTryBlocks" element at a point where it was not legal. At that point, it expected to find either a "'precompile-continue" or several other elements, but not that one. Read the XSD to determine the correct order for elements. If you're editing this file in Eclipse, you may not even have to obtain the XSD. If you hover the mouse over the root element of the document, it will give you a popup showing the syntax details of the element, which will tell you what the expected order of elements is.

  • Need PBL code to call webservice in ALBPM

    I have make one HelloWorld webservice as below:-
    package webBased;
    import javax.jws.*;
    @WebService
    public class HelloWorld {
         @WebMethod
         public int hello(int a,int b) {
              int c=a+b;
              return c;
    I have Created wsdl of it and imported in ALBPM by doing following steps:-
    Catalog-> New Module -> WebService. All the xmls and wsdl are imported.
    Now i want to call it in ALBPM flow and created Global activity. In main task of activity, I need to write PBL code to call that webservice.
    Can anyone help me in this PBL code to call it.
    or is there any other way to call this web service in ALBPM process flow.
    Thanx,
    Vinny

    Thanx. I have drag and drop only two things
    hello(OSBWeb.HelloWorldService.HelloWorldService, a : 10, b : 29, out @return : c)
    helloWorldService = OSBWeb.HelloWorldService.HelloWorldService(endPoint : "http://localhost:7001/TestPOC/HelloWorld")
    and successfully hit the service from Global Activity in ALBPM.

Maybe you are looking for

  • HT1414 Is there a way of restoring the iPhone 4s without a computer

    I do not have a computer and need to do a factory reset on my 4s. Is there a way of restoring it without a computer

  • I have windows 7 on my laptop and i can't get my songs to work.

    I have windows 7 on my laptop and the current version of iTunes. For the past two days I cannot play songs from my music or purchased list. I can't even play the sample of a song in the iTunes store. I click on play on it does nothing. What's wrong?

  • Oracle 10g EM is not working properly

    Hi all! I just installed a new database of Oracle 10g (10.1.0.2) and applied patchset (10.1.0.4). After all I started the OEM using emctl start dbconsole, it starts alright and I'm able to login on the database using the SYS as SYSDBA user. When it g

  • KT4V-L rebooting after bios

    My system keeps rebooting after the bios screen, before windows loads. ?(  ?( XP2600+ (333 fsb) PC2100 DDR - 512mb 32mb x2/x4 AGP I'm NOT overclocking, Could it be the AGP card, don't know if it's 1.5v or 3.3v? Could it be memory - perfectly fine in

  • What flex sdk build should I use with TLF 2.0 build 200?

    And what would be the procedure? Do I just drop textLayout lib instead of existing or I compile and link textLayout library from the source? thank you