SpamHaus XBL listing cleared, however O365 blocking citing SpamHaus
We have a MailFlow Connector authorizing a HostGator (I know, I know) server to transmit form mail within the domain. For a time, it was listed on SpamHaus under XBL. That listing has been cleared, however it's 24 hours later and O365 is still rejected mail
from that server citing SpamHaus.
SMTP -> FROM SERVER:550 5.7.1 Service unavailable; Client host [192.185.4.X] blocked using Spamhaus; To request removal from this list see http://www.spamhaus.org/lookup.lasso
Meanwhile, SpamHaus is saying "all clear" on it's lookup tool
192.185.4.X is not listed in the SBL
192.185.4.X is not listed in the PBL
192.185.4.X is not listed in the XBL
Is there a way to clear O365's cache of the XBL or to temporarily disable SpamHaus check and re-enable 24 or 48 hours later once Microsoft is seeing the all clear from SpamHaus?
Hi,
As per the description, I understand that the client host was bocked by Spamhaus.
As far as I know, there is no way on the recipients' end (office 365) to clear this 'cache of the XBL'. Actually, it can take 24-48 hours before it's completely removed, so maybe you will need to wait for more time.
Regarding "temporarily disable SpamHaus check and re-enable...", I would suggest you check in the forum of
Office 365 Community which is dedicated for Office 365
server/admin aspects. Current forum only focus on questions and feedback for Microsoft Office client.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Similar Messages
-
Outgoing emails being blocked by spamhaus. Blocking my IP address
Good day
My outgoing emails are being blocked. Spamhaus has blocked my IP address. How do I unblock it? This is the error message that I receive.
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
[email protected]
SMTP error from remote mail server after MAIL FROM:<[email protected]> SIZE=484112:
host mta6.am0.yahoodns.net [98.136.216.26]: 553 5.7.1 [BL21] Connections will not be accepted from 41.76.215.245, because the ip is in Spamhaus's list; see http://postmaster.yahoo.com/550-bl23.html
Please help as this is a business address
ThanksYour email provider controls the IP address they assign you. Only they can clear the reputation of a blacklisted IP address. Contact them.
-
The DYNAMIC IP address Verizon assigned me is in a range that is BLOCKED at SpamHaus?
{word filter avoidance} My public IP address is in a range that is blocked?
My mail is authenticated! I am providing my Verizon username/password when I send mail out via the outgoing.verizon.net SMTP server. I am doing exactly what Verizon tech support (escalation specialist) told me to do.
http://www.spamhaus.org/pbl/query/PBL275150
Outbound Email Policy of Verizon Online for this IP range:
It is the policy of Verizon Online that unauthenticated email sent from this IP address should be sent out only via the designated outbound mail server allocated to Verizon Online customers. To find the hostname of the correct mail server to use, customers should consult the original signup documentation or contact Verizon Online Technical Support.
Removal Procedure
Removal of IP addresses within this range from the PBL is not allowed by the netblock owner's policy.
About The PBL
The Spamhaus Policy Block List ("PBL") is an international anti-spam system maintained by The Spamhaus Project in conjunction with Internet Service Providers and is used by Internet networks to enforce inbound email policies. The PBL database lists end-user IP address ranges which should not be delivering unauthenticated email to any mail server except those provided for specifically for that customer's use. The PBL lists only IP addresses (not domains or email addresses).
For full information on how the PBL operates please see the PBL Home page and the PBL Frequently Asked Questions.
Message Edited by KaLin on 06-18-2009 07:31 AMJennyC wrote:
Hi, thanks so much-- but this is what it says on the Spamhaus site:
Outbound Email Policy of Verizon Online for this IP range:
It is the policy of Verizon Online that unauthenticated email sent from this IP address should be sent out only via the designated outbound mail server allocated to Verizon Online customers. To find the hostname of the correct mail server to use, customers should consult the original signup documentation or contact Verizon Online Technical Support. (http://www.spamhaus.org/pbl/query/PBL270930 )
I use authentication and tried using different ports but that has had no effect.
Exactly. You do use authentication. Thats exactly the point. You wouldnt be able to send emails at all if authentiction wasnt turned on so that suggestion by spamhaus is already done. Second, the only port used by verizon email is 587, so the suggestion that you may have another port is out the window as well because if it was anything else, you wouldnt be able to send email either. So it is NONE of those issues. The spamhaus suggestions do not apply as if they were not that way in the first place you wouldnt be able to send any emails via Verizon and would not be having this symptom. The fact that you can send an email in the first place means that all the spamhaus suggestions have already been verified as working.
Like I said earlier, this is a spamhaus issue at this point. Everything that spamhaus suggested you check has been verified as working on the verizon side.
The only thing left to try on the verizon side is to get you a new IP and see if spamhaus likes it better.
The suggestion that the only work around was to use the web interface is a vaild idea because emails sent via the web use a different IP address range than the one used at your house. getting a new IP may help. Otherwise, you will need to contact spamhaus directly
====================================================================================
Error exists between keyboard and chair. -
Issue with Secondary list display in ALV BLocked List
Hi all,
I am using ALV Blocked List consissting of 3 blocks.
For my requirement, in the 1st block, I need to make a colum clickable, for which I have used the User_Command Event.
But this is not working. The second list is not gettin displayed.
Here'z my code:
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = v_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_EXCLUDING =
REFRESH: it_events[].
wa_events-name = slis_ev_top_of_list.
wa_events-form = 'FIRST_HEADING'.
APPEND wa_events TO it_events.
wa_events-name = slis_ev_user_command.
wa_events-form = 'USER_COMMAND'.
APPEND wa_events TO it_events.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = v_layout
it_fieldcat = it_disptab_field[]
i_tabname = 'DISPTAB'
it_events = it_events[] " Call 1st BLOCK TO BE APPENDED For SALES ANALYSIS
IT_SORT =
I_TEXT = ' '
TABLES
t_outtab = it_disptab
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
OTHERS = 3.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
WHEN '&IC1'.
READ TABLE it_disptab INTO w_disptab INDEX rs_selfield-tabindex.
IF rs_selfield-fieldname = 'KUNAG'.
WRITE:/1 'invoice',
10 'Quantity in Base Unit',
20 'Base Unit',
30 'Qty in KL',
40 'Price'.
ENDIF.
ENDCASE.
ENDFORM. " USER_COMMAND
Please Help..Hi Ganesh,
Thanks for your reply. I have already used hotspot on the fieldcat of the clickable field. But it seems that except for the hand cursor appearing only on that field, the other columns are also clickable.
Moreover, only the fiirst block should be clickable but all the blocks are applying the user_command.
This might be due to the REUSE_ALV_BLOCK_LIST_INIT Function Module, which applies to all the blocks.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = v_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
IT_EXCLUDING =
In orser to avoid this, I am using the following code, which can be a temporary solution to the problem.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
DATA: row_count TYPE sy-lilli.
CASE r_ucomm.
WHEN '&IC1'.
DESCRIBE TABLE it_disptab LINES row_count.
READ TABLE it_disptab INTO w_disptab INDEX rs_selfield-tabindex.
IF rs_selfield-tabindex LE row_count AND rs_selfield-tabindex ne 0 AND rs_selfield-tabname = 'DISPTAB'.
PERFORM get_data.
PERFORM build_fieldcat.
PERFORM display_second_list.
ELSE.
EXIT.
ENDIF.
ENDCASE.
ENDFORM. " USER_COMMAND -
List.clear() outside of List finalList = new ArrayList(); will delete element in finalList?
Hello all!
I am using 3 ArrayLists.
the first is List<String>
the second is List<String[]>
and the third is a list of those lists List<List>
I use the first list to get the string I need, but I use the second for String.split.
I then need to keep a list of these to use, so I need the third List.
After adding the second list to the list of lists I want to clear it so I can set up the next list to be added, but if I do list.clear(); it will delete everything in that list.
If I do not clear it, it is fine.
At first I wasn't sure if it was my fault, because I'm not sure if I ever had to do that before, so I made a test case that yields the result if I change the element outside.
* To change this template, choose Tools | Templates
* and open the template in the editor.
package javaapplication1;
import java.sql.SQLException;
import java.util.ArrayList;
import java.util.List;
* @author Konrad
public class JavaApplication1 {
* @param args the command line arguments
String a;
List<String> j = new ArrayList<>();
public JavaApplication1()
a();
public void a()
a = "ADASDSADSA";
j.add(a);
a = null;
System.out.println(j);
public static void main(String[] args) throws SQLException {
JavaApplication1 a = new JavaApplication1();
If I change a = null to a = ""; it still yields the original a = "ADASD......";
protected List<String> list = new ArrayList<>();
protected List<String[]> list2 = new ArrayList<>();
protected List<List> finalList = new ArrayList<>();
finalList.add(list2);
//list2.clear();
With this I yield an empty array element, even though my array elements exist. I tried using multiple lists and I just had multiple empty elements.
So again I'm not sure if I did something wrong, or is this a bug? Since my test case worked, I'm confused.
Thanks!
~KZAfter adding the second list to the list of lists I want to clear it so I can set up the next list to be added, but if I do list.clear(); it will delete everything in that list.
Correct - you are just working with multiple references to the SAME set of objects.
Use 'remove' to remove an element from a list and then 'add' to add it to the other list.
See the Javadocs for the 'remove' method of the List interface
http://docs.oracle.com/javase/6/docs/api/java/util/List.html#remove(int)
remove
E remove(int index)
Removes the element at the specified position in this list (optional operation). Shifts any subsequent elements to the left (subtracts one from their indices). Returns the element that was removed from the list.
Parameters:
index - the index of the element to be removed
Returns:
the element previously at the specified position
Throws:
UnsupportedOperationException - if the remove operation is not supported by this list
IndexOutOfBoundsException - if the index is out of range (index < 0 || index >= size()) -
MIRO: Need a BADI/EXIT to clear the Payment Block 'R' :
Hi Experts,
I am looking for a BADI/EXIT to clear the Payment Block that is put by the standard sap code through Perform zahlungssperre_setzen in include LMRMPF1R.
I have tried to use BADI MRM_PAYMENT_TERMS but this badi gets called before the above PERFORM zahlungssperre_setzen and hence any change made by the BADI gets overwritten by the SAP code again.
Any inputs in this will be helpful.
<offer removed by moderator>
Regards,
Edited by: Thomas Zloch on Jun 30, 2011 10:34 AMHi
See SAP Note 1559443 - Changing baseline dates for payment terms for Spain as a sample for this BADI. Read the documentation for the BADI in SE18.
Try with this coding.
First, load the interface of all e_*
*--- fill all export-parameter ----------------------------------------*
e_zfbdt = i_rbkpv-zfbdt.
e_zbd1t = i_rbkpv-zbd1t.
e_zbd1p = i_rbkpv-zbd1p.
e_zbd2t = i_rbkpv-zbd2t.
e_zbd2p = i_rbkpv-zbd2p.
e_zbd3t = i_rbkpv-zbd3t.
e_zlspr = i_rbkpv-zlspr.
After, for instance
if i_rbkpv-zlspr = 'Z'. "or other
clear e_zlspr.
endif.
And you would see that it works.
I hope this helps you
Regards
Eduardo
Edited by: E_Hinojosa on Jun 30, 2011 1:11 PM -
How we can display two list if not using blocked alv ,not scr painter
how we can display two list if not using blocked alv ,not scr painter
1. Once the cell number/service on the 3GS is transfered to the 5, the 3S will become basically an iPod touch until a new sim is in place, correct? We can still use wi-fi and the apps on the phone, and still be able to sync to iTunes, correct? iOS has been upgraded to 6.
1a. With a new Sim, any issue with losing any data/apps on the phone? I dont' think so.
1. Yes. without a sim it has no service, but all other features should be useable normally.
1.a Nope, Data and Apps are independent of the Sim.
2. Once the 5 is activated on the new carrier, how do I share the apps within iTunes? Is it as easy as using iCloud (which we haven't "activated" yet) and/or plugging both phones into iTunes and transferring between devices (authorizing both)? Photos? There are photos on the 3S that we will need on the 5.
2. As long as both Phones use the same Apple ID, the applications can be synced to each through iTunes. Also any downloads on one phone should appear in the other. Again as long as both phones are using the same Apple ID.
3. Reverse order for new apps purchased (understand that not all the iphone 5 apps will work on the 3GS)?
3. If they can be run on the iPhone3GS they should be synced automatically.
4. My husband also has a new iPad, any complications there with three devices? To date, he has not "shared" apps between his 3S and the iPad. He does not have iCloud set up, but plugs into his computer to backup and transfer photos.
4. If all 3 Devices share the same Apple ID all should be synced.
As a word of warning, if all 3 devices use the same Apple ID, messages recieved using iMessage will appear on all 3 devices.
And Conctacts may get overwritten if synced to iCloud (thogh you say he doesn't have one), or merged together. -
When I select Photos, the albums are listed. However, the first album name is covered over by the larger "Album" category label. I cannot select that first album. The other albums listed lower work just fine. Thank you.
Hi,
Try resetting your iPod: http://support.apple.com/kb/HT1430.
Hope this helps!
---likeabird--- -
I keep getting calls from (removed), so I added that number to my list of calls to block. It doesn't ring anymore, but I keep getting notification messages that say "Call back (removed)". Why do I receive this when the call should be blocked?
Private info removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin ModeratorOkay, you are correct the call is not supposed to ring in. Have you done any troubleshooting on the phone? First off, try power cycling the phone. Turn the phone off, then back on again. If that does not work, then try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. See if that changes things. Is the caller using the exact number that you blocked, or is it possible they are using another number, or have restricted the Caller ID?
-
Difference between list.clear() and new instance
In the below code,
List<String> test = new ArrayList<String)();
list.add("one");
list.add("two");
list.add("three");
list.clear();
(or)
list = new ArrayList<String)();
list.add("four");
list.add("five");
What is the difference between List.clear() and creating new instance for list?1. Use code tags to post codes -- [code]CODE[/code] will display asCODEOr click the CODE button and paste your code between the {code} tags that appear.
2. Invoking clear() sets all the elements of the ArrayList to null and resets the size to 0. public void clear() {
modCount++;
// Let gc do its work
for (int i = 0; i < size; i++)
elementData[i] = null;
size = 0;
}(modCount is used to detect concurrent modification and throw an Exception when needed)
Constructing a new ArrayList creates a new, different, empty ArrayList.
In many situations they might be equivalent, but not in a case where you have two or more variable references to the same ArrayList. Example (watch out for typos)ArrayList<String> stringsA = new ArrayList<String>();
ArrayList<String> stringsB = stringsA;
: // add elements to stringsA
: // stringsB refers to the same populated list
stringsA.clear(); // stringsB refers to the clear()ed list
: // add elements to stringsA again
stringsA = new ArrayList<String>(); // stringsB still refers to the populated listdb -
Clear difference for blocked stock in LI21
Hi Gurus,
I try to clear difference for blocked stock in LI21, an error will show up saying 'reason for movement xxxx not supported ' but in OMBS, reasons for movement type 711 and 712 are maintained correctly.
also , for unrestricted use stock, clearing difference can be performed well. do you know what's the problem . thank you in advance!
BR,
DragskyDragsky
Hi
Firstly 711 and 712 are not 'reasons for movements' they are Movement types and they are used to write 0ff (711) and write on (712) stock via a stock count (physical inventory)
In the configuration in
Logistics Execution > Warehouse Management > Activities > Physical Inventory > Clear differences (Interface to Inventory Management) and then select the top one - MM-IM Movement types for clearing inventory.
Yoe will see in the SAP standard that 711 and 712 are for unrestricted stock
You need to copy the rest for your warehouse with Category Q, R and S which are different movement types (713 to 718)
This means that you can clearBlocked stock with movement types 717 and 718.
I hope that this helps
Frenchy -
[svn] 2477: Addendum to SDK-16086 - clear up a block scope-related var name warning.
Revision: 2477
Author: [email protected]
Date: 2008-07-14 14:40:18 -0700 (Mon, 14 Jul 2008)
Log Message:
Addendum to SDK-16086 - clear up a block scope-related var name warning.
Thanks Deepa :)
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16086
Modified Paths:
flex/sdk/branches/3.1.0/frameworks/projects/rpc/src/mx/messaging/ChannelSet.asRemember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.
-
Resolved: Use value from select list in pl/sql block
Hello,
I have a form with a select list: P18_BONUSTYPE, the values of which come from a LOV.
When the user clicks a button, a page process is used to insert a row into a table.
When I use the :P18_BONUSTYPE bind variable in my insert statement I get an error "Invalid number" I get an "Invalid number" error. I assume that APEX is using the displayed text in that bind variable, not its actual (html option) value.
I checked the HTML of the page, and the correct values are in the select list.
Can someone tell me how to get the value into a bind variable that can be used in a pl/sql block for a page process?
Thanks
Message was edited by:
Neeko
Issue was a value in another item.Did you tried changing the value using "to_number"? (i.e. to_number(:P18_BONUSTYPE)).
Max. -
I am currently running Firefox 3.6.8 and using the privacy settings "accept cookies from sites and clear history when Firefox closes", in previous versions of Firefox I found I was always able to retain my list of cookie exceptions. Any feedback would be awesome, thankx!
* Make sure that you do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing the "Site Preferences" will clear all exceptions including exceptions for cookies, images, pop-up windows, and software (add-on) installation and password exceptions. -
Open Recent list clears on restart
The "Open Recent" list in InDesign is cleared each time I restart. I'm running CS6, OS 10.7.5. I am current on updates. AI and PS's lists work fine as well as the Finder's recent files list. Thoughts?
Check your Edit>Preferences and under File Handling make sure you have a figure set in the
Number of Recent Items to Display
Maybe you are looking for
-
Custom message on list view in SharePoint 2013
Hi, I have created a list with multiple view and i set the target audience for each view.I set the views for each dept.So when a person not belongs to the corresponding group click on the other view,he will get a custom message like " you are not aut
-
Error while opening GRPO document
Dear Experts, I am using SAP B1 8.8 and SQL Server 2008 in Server and SAP B1 and SQL Server 2005 in Test System. I have tested one scenario, In GRPO Document, Total amount should be calculated based on Unit price * 0.2812 * Net weight. In Test system
-
My new Mac Book Pro has an unresponsive mail icon...I cannot open my mail by clicking on the mail icon...what do I need to do?
-
Hi I'm a Logic Pro User on a Late 2011 MBP. Wanting to switch to a Mac Mini or a MacMini Server Any reason why I should rather go for the Server option? Presumably if I did I could in theory have 3 macs connected to the MMS with all 3 users using Log
-
Bonjour comment ré-enregistrer une licence Photoshop Elements : 12.0 de PC Windows à MAC ?
Bonjour, comment passer une licence Photoshop Element 12.0 de PC Windows 7 à MAC. Merci