Span columns problem with Table of Contents order
Hello,
I'm having a strange issue with headings that span columns and Table of contents order. My document has a heading paragraph in a coloured box, which is then inserted in-line into a 2-column text box. The paragraph style for the box (set to in-line) is set to span all columns, so that the 2-columned text doesn't get messed up.
When I create a table of contents, the Heading style that is inside the coloured box is being picked up fine, but even though it is inserted before the headings below it, it is showing up after the level 2 headings, instead of before.
I have confirmed that the insertion of the blue bar is before the text below it, as when I remove the span columns option, the TOC works as it is supposed to. Is this a bug?
Hi there, thanks for the reply.
The only way I could move the inline box to the left was to make a custom anchor and change the X value, this did not affect the TOC unfortunately. I also checked the location of the invisible marker indicating the location of the inline text box, and it is definitely before the heading that follows. I confirmed this by removing the span columns option for that paragraph, and the TOC displayed properly after doing that, meaning there is likely some problem with the span columns option not properly recognizing the order of content.
Regards,
Similar Messages
-
HT202066 Problem with table of contents
Hello, when I use this method to export to ePub, I can't make the table of contents to appear on the exported file. Is there another way to add a working table of contents? thanks
Assuming that you are using Pages, I recommend that you download the "ePub Best Practices ..." document from Apple and use it as a template for ePub documents because it shows you what must be done to auto-generate the TOC. Take a look at this web page which contains a link to it.
-
If I change the nation setting of my iTunes in order to buy a song from the American iTunes store, then change my setting back to the Korean store (where you cannot buy music) will that create any problems with my downloaded content? I want to buy an album that I cannot get hold of in Korea, but it is available in the US iTunes store. However since most of my apps are downloaded from the Korean store I'll need to switch back in order to update them. Does anyone know if there are any issues in doing this. I'd rather find out before I spend money, change my store setting back to Korea, and then get told I can't listen to the music because I bought it from the US store and my iTunes is set to the Korean store.
Cheers.You canot easily change your country settings. The iTunes Store in a country is intended only for use by that country's residents, and only while they are in the country. To use the iTunes Store in a country you need a credit card (or other card type if acceptable in a country) issued in that country, billed to an address in that country, and also be physically present in that country when using the store. You are also restricted to waiting 90 days between country changes.
E.g., "The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance." - http://www.apple.com/legal/itunes/us/terms.html#SERVICE -
I'm having a lot of problems with tables not reflecting their formatting when I open them in a browser. I've tried opening in Safari, Firefox & Camino with the same results. For example, a row with the following html content has a much larger height & aligns the text to the top when opened in a browser:
<tr>
<td height="15" colspan="3" valign="middle"><h6 align="center">Summer 2009</h6>
</td>
</tr>
If it matters, this is a row in a table nested in another table. Here's the code down to the row in question (all tags are closed properly in the remaining code):
<table width="600" border="2" align="center" cellpadding="0" cellspacing="0">
<tr>
<td align="center" valign="top"><img src="images/events.jpg" width="250" height="35"></td>
</tr>
<tr>
<td align="left" valign="top">
<table width="100%" border="0" align="center" cellpadding="1" cellspacing="0">
<tr>
<td height="15" colspan="3" valign="middle"><h6 align="center">Summer 2009</h6>
</td>
</tr>
I am using a style sheet for text. Here's the code for "h6" if that matters:
h6 {
font-family: Verdana, Geneva, Arial;
font-size: 14px;
font-weight: bold;
color: #660099;
Any ideas is appreciated. This is driving me nuts. Spacing and alignment sometimes work and sometimes don't work. Dreamweaver is supposed to make such things easier!
KevinHeader tags are usually used round a bit of text, not parts of a table, and if you don't specify the margins on them, can force different amounts of space below in different browsers. Try making the bottom margin on h6 zero, and confine it to text within a cell.
Also, if you can upload your page somewhere and let us have the url it will be easier to troubleshoot. -
Problems with pricing in Internet Order screen(CRM E-Commerce 5.0)
Good afternoon !
We are using CRM 5.0 with CRM E-Commerce 5.0, and we are experiencing problems with pricing in the order screen.
When we create an order and insert one item at this order, this item is processed and the price is calculated and shown correctly, both in the item and in the table of totals at the right corner(where is the Total Net Price, freight value, etc).
If we change the quantity of this item, or insert more one item(with the same or other product), the price turns to zero, both in the item(s) and in the table of totals mentioned above. Also, in the table of totals, the freight value remains being calculated, even in this cases when the prices is turned to zero.
What can be happening in this case ? What can I check to determine the cause and solve this problem ?
Thank you in advance !
WilsonGood afternoon !
This problem was solved adjusting some parameters of partner determination. -
Problem with table paging [PDK for NET]
Hi All,
I have a problem with table paging in PDK for .NET (ver 2).
The Table has 14 visible rows.
The lead selection is set to "SINGLE"
When the user selects a row I can use
Table1.SelectedKeys(0) Mod Table1.VisibleRowCount
in order to get the info of the selected row.
If I will page using the "Prev/Next" page of the Table UI element it will also work.
However, when I press "Prev/Next" item and then select a row it chooses the wrong row.
(See picture: http://img509.imageshack.us/img509/3882/table5tq.jpg)
What can I do in order to solve the problem?
Thanks,
OmriHi Omri,
how are you doing ?
The SAPTable is similar to a DataGrid control and need to be bound to the datasource on every postback
a good idea is to keep the dataset available in the page or on the server ( so that you dont need to keep making expensive fetch operations
The selected row is affected by the recordset (dataset) and needs additional programming
A work around for the selected row issue is to save it in a server side hidden variable (or anything that will persist) and read and set the value in the page / next button handler
with respect,
amit -
After update 8.1.2 i had problem with sync my content from ITunes with IPod
After update 8.1.2 i had problem with sync my content from ITunes with IPod. It stucks on moment when its waiting for implementing changes (step 5 of 5) Hours and hours i'm waiting but still the same. So i cant use my Ipod at all. I restarted Ipod and delete and download Itunes again. Still stuck in the same moment. Help please. Someone has some problems like that?
I have an error message saying that "An unknown error occurred (-54)"
-
Problem with tables -- need help!
I am having problems with table formatting, when using
Preformatted text. The tables look fine in the WYSIWYG editor, but
have lots of extra space above and below the text when looking at
the output files.
I will attach the code from one of the HTML files from my
project, so you can see what I'm talking about.
Thanks.Well, if you're talking about the single-celled table with
the line:
<p class=Preformatted>[assembly:
Ace.AceAssembly]</p>
</pre>
... you can eliminate the <P> tags. that will give you
one line less. Otherwise, your remaining space is the result of the
<PRE> tag. It, like the <XMP> tag, gives it one line of
space beneath as well.
Your alternative beyond that would be to, when needed, wrap
up the script in Javascript. That line, for instance, wouldn't need
it. -
What could be the problem with table REGUH
Hi exprts
i developed a report . its wrking ok in developemt system
but in Quality system ,
the below query is taking more time.
in quality even i have taken slection criteria which is very less than devlopment selection.
please tell me the below query is performance wise not good or
is there any problem with table REGUH in quality system?
IF NOT ( t_bsak_aux[] IS INITIAL ).
SELECT laufd laufi xvorl zbukr lifnr rwbtr kunnr empfg"
vblnr ausfd rzawe
FROM reguh
INTO TABLE t_reguh
FOR ALL ENTRIES IN t_bsak_aux
WHERE laufd <> space
AND laufi <> space
AND zbukr = t_bsak_aux-bukrs
AND lifnr = t_bsak_aux-lifnr
AND vblnr = t_bsak_aux-augbl.
thanks in advance
regards
neeruHi,
Using SPACE against the keys (LAUFI, LAUFD - specifically LAUFD) will most likely return no results. LAUFD, being one of the keys and the date which the program is supposed to run (considering that this is settlement data - it has already run) - implies that this field will be populated. Putting " = SPACE" in your where clause is saying that you want to find records from the table where those fields are not populated. That is fine for LAUFI, considering it is the indicator for a proposal only. In my requirement, my client did not want to see proposals but only real payment runs - therefore, LAUFI = SPACE is correct.
The reason you are having poor performance while selecting form this table is because it is a cluster table like bseg. This thread explains a little bit of why cluster tables are a performance nightmare when trying to select - although it is about bseg, you will get the idea:
http://blogs.ittoolbox.com/sap/db2/archives/select-from-bsegrfblg-performance-problem-14247
I'm trying to find an alternative to get bank account information regarding payments - I will post a reply if I am lucky to find one!
Good luck -
Hello SAP experts , im having a little problem with table MBEWH because the data i whant to extract isnt the correct one, i saw that this table stores all the prices for the materials and it groups them by year and by month but when i check to see what was the price for a specific material the price i had on that time periord inst the same as the one on the system, also i manage my material with baches and when i check to see if that batch was in that period of time it isnt so im really confused as to how the system saves the historical data on this table, thank you in advanced.
kind regardsread OSS note 193554 , it explains everything
-
Problem with Table control lines
Hi Friends,
This is the problem with table control lines:
I have screen with table control and I would like change the table control lines dynamicaly.
Exp:
In my PBO the Internal table which I am using to loop the TC is havig 7 records and its displayed with 7 records, now I have added one more record into my ITAB and now ITAB is having 8 records, when I am looping this ITAB with TC its taking the TC lines 7 only.
here is the code:
Initial values in gt_scr400 = 8
Initial values in tc_scr400 = 8
Now added one more recor into gt_scr400 , now gt_scr400 = 9.
LOOP AT gt_scr400
INTO wa_scr400
WITH CONTROL tc_scr400
CURSOR tc_scr400-current_line.
ENDLOOP.
I have used this logic :
DESCRIBE TABLE gt_scr400 LINES g_rec_300 .
tc_scr300-lines = g_rec_300.
but its not modifying the lines in my table control.
How to change the TC lines based on ITAB total records.
Thanks,
Sridharthere is a field in TableViewName-xxx
don't remember the exact field name for (total no of records)
you can check it in debug. when you add records in Internal table, u need to modify this field which is set at the first time when table control is populated. -
Bex analyzer - internal error problem with table c_t_variable
HI All,
When ever I try to refresh a query in Bex-Analyzer ,Iam getting "internal error problem with table c_t_variable".
Please advise
Edited by: Aparna Duvvuri on Jan 13, 2010 10:53 AMHi Aparna,
try to open the query in RSRT and debug the query.the error is due to some customer exit variable so try to debug the code for the variable and rectify it.
Thanks,
Ashok -
Error "DATABASE PROBLEMS WITH TABLE MC11VA0HDRSETUP"
Hi Friends,
I got the following message when am trying to delete the setup tables.
" Error DATABASE PROBLEMS WITH TABLE MC11VA0HDRSETUP"
Am trying to delete the setup tables for application '11', but it gives me the above error. I have gone throug similar threads but it did not solve my issue.
Please can anyone provide a solution.
system detials:
R/3 release - 4.6c
PI - 2004_1_46c
SAP_BW - 30B
PI_BASIS - 2003_1_620
Any information will be appreciated
Thanks,
VBRHi Kishor,
Thanks for your reply.
I have gone through that SAP Note 456102 and it was not of much help for our issue because we are ahead of PI that is mentioned in the note.
Can you send your email id so that i can forward the error screenshots.
Regards,
VBR -
Hi experts,
After doing the upgrade system from 4.7 to 6.0 we have problems with table Teven. Trying executing RPTIME00 when the instruction update (table teven) is executed the program stay updating and never finished
Does anybody know why that happens?
Thanks a lot,
Regards,
RebecaDid you update your database statistics after the ugprade?
Try to catch an SQL Trace for the statement using ST05.
Markus -
Table of Contents order problem
I have looked through a number of the other discussions on here, but have not come across my exact problem. I noticed people where having problems with thier TOC ordering some of the headings properly. My problem is similar, but I don't see how it is the same.
Here is my problem.Below is an portion of my TOC. What is happening is in this case it is putting chapter 6.1 as part of chapter 5. And these are on two different pages. The 6.1 heading is below the Service and Maintenance title in my document. I want to get it so it always puts it correctly.
5.8 Transporting 50
5.9 Storage 51
6.1 Maintenance Chechlist 52
SERVICE & MAINTENANCE 52
6.2 Fluids and Lubricants 53
6.3 Greasing 53
It does not do this on all of my .1 sections, but it if it does it once, it will do it everytime I recreate my TOC in the same spot. I have been correcting this manually and just cutting and pasting, but I was hoping that there was an actal fix for this small problem.Thank you so much. I believe that is the same answer the other questions had. I am just ready for a vaction and not thinking clearly. This worked perfectly. I pulled my text frame all the way to the side and it worked. So then all I had to do was adjust the tabbing on my frame so the text would start where I wanted it to. Then I just had to adjust the other frames that used that same style. It worked perfectly. Thanks so much.
Maybe you are looking for
-
Cannot send emails from my Iphone or Ipad
Hi can anybody offer any suggestions please? Since the switch to BT mail, I have been unable to send emails from my Iphone or Ipad, I get a message saying that my password is not recognised. I have followed all the instructions on how to reinstall
-
Two profit centers in same plant for one material
Dear All We have this request from a customer. There is a material in 1 plant but need to track that same materials in 2 different cost elements depending on where these are used (e.g. for sales will be booked to profit center 1 and demo will be book
-
Upgrade RDF Data from 11.1.0.6 to 11.1.0.7
Hello, I was considering upgrading my existing RDF data from the 11.1.0.6 release to the 11.1.0.7 release. Do I need to drop my RDF data to migrate from 11.1.0.6 to 11.1.0.7? I have loaded a large amount of data and I would like to avoid reloading ev
-
Hey guys please help me out, I use videos on safari for work and at my leisure time.
-
Vendor replication from ECC to SUS
Hi Gurus, We are replicating vendors from ECC to SUS. The XML message is failing in the SUS side. The error is Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared