SPAN RSPAN Monitoring Software

Dear Experts,
Looking for SPAN/RSPAN like solarwind / Ciscoworks.
Which can generate reports
Manage Graphs
Create Custom Reports
Any good software please advice...
Jawad

For SPAN/RSPAN/ERSPAN/NETFLOW and some similar traffic analysis and graphical represntation of such data is done using using Cisco' Hardware/Software - Network Analysis Module, aka, NAM.
However for SPAN/RSPAN and other feature you need to be selective on which NAM would suite you. You can check NAM Deployment guide to explore different NAM options.
For more details you can check :
http://www.cisco.com/en/US/products/ps5740/Products_Sub_Category_Home.html
NAM Deployment Guide:
http://www.cisco.com/en/US/prod/collateral/modules/ps2706/white_paper_c07-505273.html

Similar Messages

Span-Based Monitor of IPPA Agents at remote site for UCCX 9X

I understand to be able to monitor/record agents using IPPA (for UCCX), you need to utilize Span-based monitoring as opposed to Desktop Monitoring. According to the SRND, it also states that there should be no routing devices between agent phone (IPPA) and UCCX server which means no routers in between. Question I have is if I put the failover UCCX at the same location as the IPPA agents, would this work? I understand there might be an issue with redundancy with this scenario. Thoughts?

It is possible without QM. When using desktop monitoring, the phone is configured to Span to PC port. The agent must be running CAD and the PC running it must be attached to the PC port on the phone. CAD sees the spanned packets from the phone and then forwards them to the recording service on the CCX server. The big gotcha is that the NIC in the PC must not discard 802.1q-tagged packets. If the NIC discards them instead of forwarding them into the NDIS stack, CAD will never see them. Sometimes this takes a Google search and a registry setting change to fix if it doesn't work at first.

Access Denied Error Opens when Installing HP Monitor Software (Windows 7)

im getting the following error trying to upgrade my screen driver.
"Access Denied Error Opens when Installing HP Monitor Software (Windows 7)"
I found this error in the help area but it doesnt address the problem, it simply describes the device manager instalation procedure, which I am using , and which results in the error.

Hi debgibson,
What is the monitor model number and what is the PC model number?
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

How can i do this, Check to see if you have any network monitoring software that might be using your iCloud account

How can i do this, Check to see if you have any network monitoring software that might be using your iCloud account to automatically send messages, such as firewalls or internet security software configured to send an alert when a potential security issue

you can try:
*Wireshark: http://www.wireshark.org/download.html

Cisco video camera monitoring software from remote location

Hello
What is the best way to use the Cisco video camera monitoring software from remote location.
I am talking about the AVMS / SWVMS software.
I am thinking of either a vpn tunnel or Remote Desktop (Terminal Services).
I would like to use the vpn tunnel, but am afraid that the encryption/decryption of all data will drastically slow down the data throughput.
THanks,
Cliff
CCO: clifford.gormley

Hi Clifford,
Thank you for posting. I use the AVMS software remotely and it works good. At first I changed the http ports of each camera and forwarded those ports in the router. I set up the cameras in the remote AVMS software with the WAN IP address and port number. That worked quite well. I then decided to try to reach the cameras through a VPN tunnel. I found that it worked perfectly and I was able to view up to 6 cameras. Your results will vary depending on how much bandwidth you have at each end. The important thing is the upload speed at the camera end of the tunnel. I have anywhere from 3-4 Mbps at any given time for the upload speed at the camera side and 30-40 Mbps download speed at the AVMS server side. I have also used UltraVNC to view the AVMS server through the tunnel and that worked well. Note that if you view the AVMS software using RDP you will see a black screen where the video should be. This is a limitation of RDP, not the software.
Please reply if you have any questions.

WVC200 Audio issues when used with Monitor software

I use a number of WVC cameras and when I view them through a browser, the audio works fine. When I use the Linksys "monitor" software, i have a continuous echo/noise problem. Is there a fix to this or am i limited to watching them one at a time through a browser??
Solved!
Go to Solution.

Hi.
These products are being handled by the Cisco Small Business Support Community.
*If my post answers your question, please mark it as "Accepted Solution".
*Don't forget to give "Kudos". Thanks!

Exchange Server 2013 Monitoring Software

Greetings,
Any suggestion for Exchange Server 2013 monitoring software that is capable of :
1- Monitoring Server Status / Health / Resource Utilization / etc..
2- Incoming / Outgoing email messages to / from the organization
3- monitoring specific mailbox for incoming/outgoing messages
4- spam detection
5- message content when monitoring mailboxes
Thanking you

Hi Jamil,
If you are using hardware appliance then you can check with the hardware appliance vendor for the functionality or you can enable anti spam agent on mailbox server role as well. Mailbox server role will provide you following anti x facilities once enabled.
Sender Filter agent: compares the sender on the MAIL FROM:
SMTP command to an administrator-defined list of senders or sender domains who are prohibited from sending messages to the organization to determine what action, if any, to take on an inbound message;
Recipient Filter agent: compares the message recipients on the
RCPT TO: SMTP command to an administrator-defined Recipient Block list. If a match is found, the message is not permitted to enter the organization. The recipient filter also compares recipients on inbound messages to the local recipient directory
to determine whether the message is addressed to valid recipients. When a message is not addressed to valid recipients, it is rejected;
Sender ID agent: relies on the IP address of the sending server and the Purported Responsible Address (PRA) of the sender to determine whether the sender is spoofed or not;
Content Filter agent: assesses the contents of a message and also acts on the safelist aggregation feature, which collects data from the anti-spam safe lists that Outlook and Outlook Web App users configure and makes this data available
to the Content Filter agent;
Protocol Analysis agent: is the underlying agent that implements the sender reputation functionality. Sender reputation relies on persisted data about the IP address of the sending server to determine what action, if any, to take on an
inbound message. A Sender Reputation Level (SRL) is calculated from several sender characteristics that are derived from message analysis and external tests.
If you are not interested to use EOP then you have the option to use GFI or any third party tool. I would suggest if you are using hardware appliance then this would be done by the hardware appliance if capable of doing this. Thanks.
Regards, Riaz Javed Butt Consultant Microsoft Professional Services MCITP, MCITP (Exchange), MCSE: Messaging, MCITP Office 365

Cisco camera and SB monitoring software compatibility

Hi all,
We are currently looking into Dome Day/Night Outdoor security cameras and the small business ones may not fit our needs. I have done some research and found CIVS-IPC-2630V.
Would this camera be compatible with the small business monitoring software SWVMS16?
Thank you.

Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center.
Unfortunately none of the Enterprise Camera's are compatible with the Small Business Video Monitoring Software.
If using the Basic version, only Cisco Small Business Cameras are recognized. (WVC210, WVC/PVC2300, PVC300, VC220 and VC240) There are some new cameras in development, but there is no timeframe for availability yet.
If you have any other questions, please let us know.
Eric Moyers
Cisco Network Support Engineer
CCNA, CCNA-Wireless
1-866-606-1866

Monitor software wouldn't detect WVC54GCA

Guys, I'm really frustrated here.
I just got WVC54GCA today. Configured it. And it worked fine for about an hour. I could see the video on Monitor software and on camera web address. Than I could only access video through internal camera web site under it's IP address but the Monitor software delieverd on the CD wouldn;t detect the camera at all.
I had to restart the computer. Now Monitor doesn;t see the camera, I can't enter camera through web nor is it visible in my network devices.
When I restarted the device I noticed that on my router (WAG200G) it appeared with new IP address and the previous IP address is still there in the DHCP client table. Despite the fact that it is visible in DHCP table I still can;t connect to neither IP addresses of the camera nor is it visible in my Network under Windows.
Nothing works now.
I thought that this is one of those things that you configure and forget about.
Please help if you know how to.
Cheers,
Swimmer
P.S. Quick update. I have disconnected the camera again and powered it back on. Now I can access the video through web but Monitor software wouldn't detect the camera.
P.S. 1.
I noticed now that everything went back to nromal when I moved the camera closer to the router. When I first connected it it was getting signal from the router. Than I moved it elswere when I'm using Linksys range expander and everything gradually stoped working. Now when I moved it back closer to the router it works again. My understanding was that range expander should not interfere with hardware like that. I'm using all sorts of wireless devices and never had problem like this.
Message Edited by Swimmer on 09-02-2009 12:49 PM

Yup. You should set the ip address manually on your router and forward the port manually on your router. I've forwarded ports 1024, 554 (for remote streaming) and 5000 to the static ip on my camera; works like a charm.
Port forwarding is on the Applications and Gaming tab on my WRT54G2 and the static ip assignment is on the Basic Settings tab on the camera.
On the camera, change the configuration type to Fixed IP Address and give the camera an ip address outside the range of the dhcp on the router. For instance, my router's dhcp range is 192.168.1.100 to 149; any address outside this range is fine for a static ip address.
You may want to configure the range extender that way, too, to ensure that the IP's don't get changed when the router's dhcp address lease expires.
Check this out and let me know if it works...I have mine set up this way and I have zero issues with the camera falling off the network now.

Recommendations for log monitoring software

Hi there
I'm looking for recommendations of log file monitoring software, preferably with a GUI rather than purely CLI based.
I need to collate and monitor log files from OSX servers, OSX clients, antivirus software, network switches and firewalls.
Any ideas?

Hi and thanks for the advice. I've been looking at Splunk, but it seems a little complicated to set up. Guess I'll keep plugging away at it....

System monitoring software

What is the beast/most accurate system monitoring software. As musch as I love my MOBO the monitoring software it was bundled with is less then par.
I have tried nMonitor from nVidia, Speedfan, and PC wizard.
nMonitor only monitors 3 temps.
In Speedfan, I can't tell which temps are for which components. I put the CPU under load to trya nd figure it out and what I came up with does not look right.
PC Wizard ver 1.65 seems to have a CPU temp bug. It says my CPU is over 200 degrees C! (Obviously that is not correct.)
What is a good one to use???
Thanks in advance.
CK

Many people here use Speedfan intead of Core Center. Corecenter may give more accurate readings (some whacky voltages though) but it does not work for fan and cool and quiet regulation, and some say it can cause bios corruption and stay away from it completely or never run it continuously. I stopped using corecenter when I heard it is not a good way to overclock and I use speed fan to do the things that corecenter should do. Speedfan is not slick, but I am finding it useful to regulate fan speeds (and sound) automatically. It's voltages are off, but temperatures and fan speeds seem reasonably close to reality. On my board the cpu temperature and cpu fan are both #2 and nb is fan #1 and temp #3. There are some pretty good configuration options deeper in the menus. Lately, with some bios, starting speedfan when windows starts is not recommended. I am able to start with windows in the bios below so far. Have been using it a few weeks.
everest and all the rest give wierd voltages and i don't trust any software's voltages. bios voltage readings are supposed to be the most correct, but I have seem many that are way off consistently.
Good luck.

Premiere Pro won't span multiple monitors

Premier Pro CS3
I cannot get the PP app to span multiple monitors. Previously I have used Premiere to span two 22" monitors so I can have a very wide timeline. Now that I have installed CS3, it "takes over" my second monitor as a "Program" monitor and I cannot figure out how to shut it off. It also makes this monitor useless for any other applications that I have open while CS3 is open. Help!

Well, now it's working and I have NO CLUE WHY... perhaps opening and closing Premiere 5 times is required before the videocard gets into the act. In any case, it has just started working and I completed an entire editing sequence with no freaky behavior at all.
I love it when a plan comes together - but it's sure nice to know "why" for next time ocasionally... I did use an older saved sequence as a starting point this time, so perhaps something was corrupted in the "new workspace" that I tried to save.
Now, of course, I'm afraid to ever turn this computer off again, or even close Premiere...
Thanks to all for your help - you will all get a free autographed copy of my next book, "Dual Monitors for Dummies"...

HT201304 content barrier & parental monitoring software

What parental monitoring software is available, both free and paid versions, for the iPhone 4S's? I want to be able to selectively see my teenager's web browsing and texting.

Search the iTunes store and find out for yourself.

Camera control and Monitor Software

Hi All,
Two questions, quasi-related.
First, does anyone know of any camera control software for Sony? I have a TR27 and an HDR FX1.
Second, does anyone have any experience with monitoring software? Specifically, I am looking at the Red Lightning DV Monitor software. It would be nice to go from the camera directly to the hard drive. Also, is there any software which lets you monitor more than one camera simultaneously?
Thanks. Any input/links would be helpful and appreciated.
--Dana

They should produce the same EXACT version of the RAW file.
The profiles are meant to give approximately the same rendering concerning tone and color. You cannot render the exact same thing as Canon uses proprietary algorithms which Lightroom cannot use. The profiles just approximate those using Lightroom's RAW engine. Also they will only come close if you use default settings in your camera, so no highlight priority, no added saturation, etc. If you want the exact same thing, shoot jpeg or convert the RAW to tiff in DPP. That said, my experience is that the camera matching profiles come very close to out-of-camera rendering as long as you don't modify the styles.
I say they HAVE to, because otherwise who is right - who´s got the true colors (e.g. Faithful style is supposed to represent colors exactly if shot at 5200K, yet DPP Faithful differs from LR faithful????)
None of Canon's styles give accurate rendering. That is not what they are meant to do. They are meant to be visually attractive, which is very different from accurate. Faithful is not really scene referred correct color. See for some measurements of that on one of the more accurate cameras, the Canon 5D mk II, here. The way to get correct color, if that is what you are interested in, is to shoot a colorchecker chart and use Adobe's free DNG profile editor to generate a calibrated profile for your camera.
Also, is there a way to convert other picture styles one has created into Lightroom profiles perhaps through some use of DNG Profile Editor?
No. Would be neat, but is not currently possible without a lot of manual labor. You can shoot a colorchecker and by comparing the rendering in DNG profile editor to that in DPP visually and using the patch tools, you might be able to sort of get there but that is going to be very tedious. It would be nice if we were able to give DNG Profile Editor a different target than perfect rendering of the colorchecker, because right now, the only way to do it is visual.

Cisco CE500 Switch and SPAN Port Monitoring

Does the Cisco CE500 switch support SPAN/Port Monitoring? If so, how is this configured via the browser?
Thanks

Please check this document on Cisco.
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015c612.shtml#Cat500

SPAN RSPAN Monitoring Software

Similar Messages

Maybe you are looking for