Spare parts for powerbook G3

The screen of my powerbook G3 is severely damaged by accident. So I contacted my nearest Apple reseller to find out that there are no spare parts any more for this "old" machine. I just would like to know if this a local problem or are the new G3 parts sold out worldwide ?

New parts are no longer available.
But there are folks who have discovered the "large chunks" you can quickly separate a computer into are worth more as parts than as complete systems. Complete screen unit for powerBook G3 is a commonly-available part. There are three different ones for the WallStreet PowerBook alone.
eBay is one place where some of those parts are available. Tested parts with a modest warranty are available from online sellers and repairers of iBooks and Powerbooks with their own web sites. Full repair service with warranty is also available.

Similar Messages

Best place for spare parts for PPC 1.5 Mini?

Hi.
I'm looking for the best place to get spare parts for a Mac Mini PPC G4 1.5GHz on the net. The fan is most likely giving up, because it has recently begun to sound as the bearings in the fan are bad.
Regards,
/Mysteron

Hi Mysteron-
I've used these folks for other projects: MAC-PRO
If you don't see what you need or have questions try giving them a call as they are very helpful.
Luck-
-DP

Spare parts for SNS-3415

Hi guys,
I saw the HW specs of the 3415.
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps11640/data_sheet_c78-726524.pdf
There is a spare part for the disk and for the power supply. Does anyone has the experience if the ISE software will check for the HW. The SNS server has a hardware raid controller. I want to know if I can use the raid controller just for mirroring for HW redundancy.
The SNS 3415 has two power slots. So i suspose this can be easily done without breaking the 'service' requiremtents for TAC.
regards,
Sander

Hi Ravi,
For the OS disk, I'm pretty sure we will run into problems. Like you said the UNIX distri will check for the HW bases on the system ID (3415 will have only 1 disk like the specs of Cisco). So sure I don't want to run into problems with my service agreement.
But for the PSU it would be a nice to know if I can install this without any issues. Maybe you got the HW in the LABs?
regards,
Sander

Can I order spare parts for my iPhone and have them replaced in an Apple store near me?

Can I order spare parts for my iPhone and have them replaced in an Apple store near me?

pretty sure apple don't sell spare parts at all
but try google there are some who does sell parts if they are official and if it matters if they are not I have no idea

Spare parts for Nokia 8910i!!!

Hi all,
Can you please help me with some spare parts for this model. I cannot find anywere anything anymore Any part will be most welcomed. Thank you

Yes, but there are very few and very expensive. I thought that maybe someone have an old phone or something. I really love this model and i'm trying to keep it in shape

My screen is cracked. Is there a spare part for it?

my Mac Air's screen is cracked and I am going to loose the whole screen very soon. Is there a spare part for it? How can I replace it?

You're eligible for an out of warranty replacement for $199.

Spare part for HP HDX X18

Hi guys,
I'd like to know where and how i can get this plastic spare parts for HP HDX X18 ? don't have to be only this part can be all this side plastic cover too...

You will need to completely identify your HDX noteboook with its product name.
Lets start with you helping us by identifying your notebook completely.
HP has produced and brought to market more than a thousand different models of notebooks and desktop PCs over the years. It is difficult to help you if we don't know which specific model you own..
Method #1: If the notebook will boot into Windows, you can retrieve your Product Number by pressing Fn + Esc key.
Method #2:
Remove the battery and look in the compartment where the battery was installed. You should see a Service tag with printed part number and a product name. Please post the p/n (with all alphanumeric characters) here. If you live outside of North America, it helps us if you post the country of purchase. Also post the installed CPU type. (AMD or Intel)
Don't forget to post the name of the installed operating system if you haven't already done that.
Use the Maintenence & Service Guide to see exactly which parts you need. Once you identify the notebook I will be able to edit this post and provide a link to the pdf file for you.
You can use the HP Part Surfer to order the parts you need, if available, from HP.
You can also order the parts from an online vendor if they are available.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Where can I get a spare part for my fantastic apple sound dock A1121

All,
I am a proud owner of a approx 7 year old apple sound dock (the white bar with contacts on top)
unfortunately my kids ripped the ipod out of the top contact bar, and somehow the contacts broke.
I could manage to open the box and dismount to find out whats wrong, but its simply broken.
the spare part would be a plastich frame with the contact bar.
Is it possible to obtain from Aplle or the origin manufacturer this plastick frame and the plug?
I can run the device using the AV cable on the rear, but this is unsufficient and not too elegant.
any help is appreciated. If anyone has a vendor or support link, just post it here or send it to me directly .
Thanks in advance
Claus

I presume you're referring to the Apple Hi-Fi:
http://www.apple.com/support/ipodhifi/
Apple never sold parts for that device, and I've never seen any third-party source for parts or repairs. I think you're probably, therefore, out of luck.
Regards.

Sending Spare part for repairing via subcontracting

Hi All,
Our business practice includes to send any spare part(i.e Motor) for
repairing purpose outside the plant premises on the subcontracting
challan.
But this particular spare part (of ERSA material type) has ALREADY got
issued and NO stock exists under this material code for sending it
outside.
So currently we are creating the new material code (which is non valuated
in nature)and generating the stock(via movement type 501) of the same for
sending it outside by using the custom movement type 941 (copy of 541
movement type).
For the above excercise to happen, everytime it is very tedious excercise
to create the non valuated material code. it implies every repairable
material code is having 2 material codes one is valuated and 2nd one is
non valuated,which gives lot of confusion to users.
Please suggest some way out for this issue.
Thanks & Regards
Nitin

Hi
I hope you can use Split caluation here. Create two valuation type Valuated and Non - Valuated. Carry out the necessary config for split valuation. while Creating material master for valuation type valuated maintain MAP in accounting view and for valuation type Non-valuated maintain standard price 0. This may be useful for you
SAS

Where do I find spare partes for in-ear headphones?

Apple in-ear headphones have a BIG defect.
It's too easy to loose the gummy part that fits into the ear, especially if you them around the neck while not using them and you wear a backpack.
the replacements you find in the packaging have different sizes, so that you can find the right size for you BUT there is only a couple for each measure, thus you DON'T have replacement parts.
I've lost 4 pieces in the last months progressively adapting in using the wrong sizes (how annoying!).
Now I've lost another and apparently there's no way to get spare parts.
Headphones cost as much as 90 EUROS in Italy
My ones are just a few months old and perfectly working!!
I can't believe I have to trash them because I can't find a spare that could cost few cents ta Apple.
In my eyes this is a big hit to Apple reputation
I "forced" my company to buy for me in the last months a MacBook Pro, two iPhones (3G and 4) and an iPad 3G. I think I deserve some support, but, at least in Italy, the customer service is not up to the level of the brand.
Is there someone out ther that can help me?
Giulio

you're not addressing apple when you're writing in this forum but just other users like you
and I'm not sure something as small as headsets have replacement parts but they should be covered by the normal warranty

Spare parts for repair

Hi,
Are there anywhere in the material master where i can indicate if the product is repairable or not repairable.
It shouldn't indicate where or more information, but only a click off or a sign that it says that the part is repairable.
Thanks.

Hi,
I don't think that such an indicator exists, but you have a few ways to achieve it:
1) The easiest and most straightforward way of adding info to a material master (and not only!), is the classification mechanism, where you can classify a material as being "reparable".
2) Use material group to have a group like "reparables"
3) if you need some more hard core differentiation one could even customize a new material type. Not recommended especially in cases when a reparable can become non-reparable, and vice versa.
4) In the BOM there's a native indicator for spare parts, so if you use BOMs maybe that will work better for you.
Regards,
Mario

Spare Parts For iPOD 60 GB

I want to know about +*ALL THE SPARE PARTS*+ that are available for the iPOD 60 GB ...
Like for example a battery is replacable ... can we also replace the upper surface of the iPOD ... because mine is all scratched now and you can hardly watch videos with ease.

For a source of replaceable parts, PDASmart http://www.pdasmart.com/ipodpartscenter.htm is a good start - including a few parts you didn't think were replaceable. Of course, much depends on the model of iPod.
But because you're dealing with the screen, I'll suggest a second option. I've had fine results with InvisibleShield http://www.invisibleshield.com/ipod/. By correctly applying this thin, tough, removable film, used by the U.S. military to protect the leading edges of helicopters, the scratches seem to disappear. It's functionally what you require, and has a lifetime guarantee against wear. Mine is invisible and nearly undetectable - just follow the video instructions carefully.

Need an spare part for my Portege Z830-10E

Anyone know the ID, ore where i can get the part near the Display?
I cant find it anywhere, and i lost it, becourse a screw gos out :(
https://www.dropbox.com/s/q2aj21xzwpcvl25/IMG20141011105220_1.jpg?dl=0
Its a Z830-10E

Not quite sure what you are looking for but the picture shows a left display hinge.
Anyway, all parts could be ordered directly from local Toshiba authorized service provider.
Get in contact with the guys and ask for such compatible part.

Hardware spare part for HP HDX X18-1190EZ Premium Notebook PC wanted!

Hello Community!
During the replacement of the notebook keyboard a very small part which fixes the keyboard on the motherboard is broken, what a pitty!
Now i am searching a replacement part on the internet!
Perhabs anybody at the community could help me to find this fixing part to fix the keyboard on the motherboard of this fantastic notebook?!
Thank you very much for your attention an your help!
Daniel Feuerle
{Private Information Removed}
This question was solved.
View Solution.

There are several as-is or parts motherboards on eBay right now. You might contact the sellers and see if the zif connector is intact. Here is one:
http://www.ebay.com/itm/506495-001-ASIS-HP-HDX-X18-1100-Intel-Motherboard-/280704333143?pt=Motherboa...
The seller laptopking also has several for sale.

MRP design for Service Spare Parts

Hello,
I am in process of designing the MRP run for service spare parts for construction and mining equipments business. There is a central warehouse and small depots.
Help me out to design following MRP requirements.
1.     MRP process is expected to consider stocks at all these locations i.e central ware house and depots. Optimization across locations and stock transfers to be considered.
2.     MRP process is expected to consider open PO requirements.
3.     MRP process is expected to consider in-house service orders reservations requirements.
4.     MRP process is expected to consider open sales spare parts order demand from dealers.
5.     Certain formula base forecast requirements for specific spare part
If SAP standard solution is there or any work around is expected.
Regards
Sanjeev Dhavan

1. MRP process is expected to consider stocks at all these locations i.e central ware house and depots. Optimization across locations and stock transfers to be considered.
- MRP can be run for a whole plant or single material or MRP area(group together some storage location). I hope your warehouse is a plant so you can run the MRP at your plant(ware house) level.
2. MRP process is expected to consider open PO requirements.
- You should use consumption based planning but you need to identify what type of MRP you want to use.
    - reorder point planning     - forecast based planning      - time phased planning
    - in general all the above MRP will consider the open PO / PRs
3. MRP process is expected to consider in-house service orders reservations requirements.
- this is possible by selecting proper MRP type, for ex. if you want to use reorder point planning, then you should use V1(Reorder point planning with external requirements) which includes sales order and manual reservation in net req calculation.
4. MRP process is expected to consider open sales spare parts order demand from dealers.
- Refer point 3
5. Certain formula base forecast requirements for specific spare part
- do you want to use forecast based MRP? what formula you want to use?

Spare parts for powerbook G3

Similar Messages

Maybe you are looking for