Spare Parts Mod (CHEAP CHEAP)

so i've decided to take some of the parts from some of the systems i have, and put them together into a formal machine....
so far... the color scheme looks like blue,silver,black...
the parts i have already for it:
AMD Duron 1600 the HS/F on it... is my 2800+'s stock copper HS w/ a Tt 60mm FAN
GEIL PC3200 w/ blue heatspreaders
Shuttle AN35Ultra400 w/ blue PCB
Abit Siluro GF4 ti4200 w/ blue PCB and no HS/F
my old main rig case... silver and black w/ that generic spiderweb side window...
(has room for 1 rear, 1 window, and 2 front fans...)
550w 24A +12V powermagic PSU that is in the main rig (getting the Tt PSU replacement today)
what i've got ordered:
4 blue 80mm LED fans... (1.98 a peice )
Thermaltake HS/F for GF4 (its got blue leds in it too) (11 bucks )
some of it is already here... and i think the last package comes today
now as far as hard drives...
all i have to spare right now are 20GB...
i have 2 seagate 20GB identical drives... and i was considering getting RAID IDE card for it and go RAID 0... but alone those drives are pretty slow (and sucky)
and i have a fast 20GB WD (the newer 7200rpm model) too... but only 1 :(
i imagine those 2 seagates in a RAID0 would do better than a single new SATA drive...
any suggestions? i'll have some pics soon... so that you can actually see it...

Raven: actually i've never had a problem with this case... i've got a dual fan power supply keep in mind...
so its more like 2 fans out, 3 fans in... (if you don't count 1 of the PSU fans... if you count both than your all right...
3 in 2 out ain't bad at all
i will always check for stagnate air in there tho i mean, its shouldn't be bad at all
if it gets too too bad i can always put a 60mm fan in there... there is 1 spot for that... and i got a black one sittin here
here's a good shotta the abit w/ new Tt HS/F... i have yet to put the ramsinks on yet
i gooped on lots of Antec Reference cpu silver... lol a bit too expensive to go around gooping as5 on something that doesn't need it...
this antec reference is ALMOST as good as the AS5.. plus i have lots of it
not a bad lookin 'ol case,just wish i had black drives i have another beige LG CDburner that i'm gonna put in
should i paint?

Similar Messages

Spare Parts genuine OEM

Can i still buy Genuine OEM Spare parts for my 2007 iPhone 2g,.. i can see there are loads of parts on ebay, but to be honest i don't want cheap crappy replacement parts, i want top quality OEM / genuine Apple parts, but unsure if its possible to get them, and if so from who? (checked with Apple and they said Apple do not sell any spares parts)
thanks

I guess the part could be called genuine OEM but what you'd be buying would be from a salvage phone.

Spare Parts / Screen Goes Black

Hi guys,
Anybody know a trustable source of getting spare parts of iMac in Europe? (better in Spain, but the UK will be fine)
A couple of days ago my iMac just died. The screen turned off but i could hear the iMac running. I restarted in safe mode to check if that could be a Software problem and the it lasted on for a couple of minutes and it turned off completely. It never turned on again.
I talked to the repair service and they said the most common cause could be
1 - The Internal Power Source (around 200 euros of repair cost)
2 - The Inverter (around 500 euros of repair cost)
For a 3 years old iMac, paying 500 euros y NOT an option. I am a bit **** out about the reliability of Mac now.
Anyhow, i have to resolve the problem or use it as a fairly big paper holder. I might buy the piece and ask a friend of mine who is an electronic engineer to help me out. I checked the iFix guides and also parts in the US and the cost of the Power Source or Inverter in never more than 100 euros.
By the way, by reading on the Internet about this turn off monitor problem most of the people say the the usual causes are the Display Power Source or the Inverter, but it could be that the memory went bad too.
Thanks for any help,
S

HI,
It sure wouldn't hurt to try and boot from your install disc.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. Make sure there is always 10% to 15% free disk space
Try Resetting the SMC
Try Resetting the PRAM
Carolyn
Message was edited by: Carolyn Samit

Report for Order and spare parts

Hello every one, i am looking for a report which can tell me order number wise use of spare parts. It can be either in order or some seprate report. I have not find any such report till yet. Kindly help me in this.
Regards
Abhishek

Baed on the requiremtns given, IW13 can also be auseful report for you.
SM

Need field and table for spare part material and price for a given material

Hi,
      In need to create a report with following fields:-
       Customer           Material          spare part material            spare part description             price                   currency.
From which table and field I can get all this information.Please guide me.
Hint. cl30n transaction for material managemant.
         vk13 transaction for price maintenace.
Regards.

CL30N is a general transaction that can be used for any classification, but material master maintenance is usually MM01/MM02 or MM41/MM42
Material description can be taken from table MAKT
customer from table KNA1
The question is what you are going to analyse? where do material and customer tie together? do you do the analysis on sales orders VBAK and VBAP ? or invoices VBRK and VBRP? or customer material info record KNMT?
or do you capture this info in classification? then you get the values from AUSP
Edited by: Jürgen L. on Aug 3, 2010 9:42 AM

Deletion OF schedule LInes from APO SPP(Spare Parts Planning) through ABAP.

Dear All,
I need to delete the schedule Lines from APO SPP(spare parts planning ) system.I am looking for any available BAPI provided by SAP for this purpose.Please provide me help if any of you folks previously in your project went through this requirement.
If any other way is there other than BAPI please suggest.
Regards
Mukesh Pandey

Hi Siddartha,
That option is not working.
Thanks

Decimal conversion of Sales Tax in 'SPARE PARTS SALE INVOICE' ( smart form)

Hello,
I am displaying a the value of the Sales Taxc in 'SPARE PARTS SALE INVOICE'. (in Smart Form)
The field(which holds the Sales Tax value is 'KWERT' -LBBIL_INVOICE-IT_KOND ), with datatype 'CURR', reference table 'KOMK' and reference field 'WAERK'.
In my smart form,i have declared a variable 'SALES_VALUE' of datatype 'KWERT' and reference field 'IT_PRICE-WAERK' (LBBIL_INVOICE-IT_PRICE), where 'WAERK' is the SD document currency.
Now when i display the field 'SALES_VALUE' i get 735.00 , whereas the original value in the field is 73.5
how to correct this and where am i wrong ?
Thankyou for yur time and really appreciate the help.
Shehryar

You are using currency fields that reference a currency code. Most currencies in SAP have two decimal places. Dividing by 100 will work in most cases. Ideally you should get the CURRDEC value in table TCURX for the currency you are working with... then divide by 10 that number of times.
example-
USD, 2 decimals, divide by 10 twice.
There is a function module that will do this for you. Can't think of the name...???

What is best practice for dealing with Engineering Spare Parts?

Hello All,
I am after some advice regarding the process for handling engineering spare parts in PM. (We run ECC 5)
Our current process is as follows:
All materials are set up as HIBE's
Each material is batch managed
The Batch field is used for the Bin location
We are now looking to role out PM to a site that has in excess of 50,000 spare parts and want to make sure we use best practice for handling the spare parts. We are now considering using a basic WM setup to handle the movement of parts.
Please can you provide me with some feedback on what you feel the best practice is for dealing with these parts?
We are looking to set up a solution that will us to generate pick lists etc and implment a scanning solution to move parts in and out of stores.
Regards
Chris

Hi,
I hope all the 50000 spare parts are maintained as stock items.
1. Based on the usage of those spare parts, try to define safety stock & define MRP as "Reorder Point Planning". By this, you can avoid petty cash purchase.
2. By keeping the spare parts (atleast critical components) in stock, Planned Maintenance as well as unplanned maintenance will not get delayed.
3. By doing GI based on reservation, qty can be tracked against the order & equipment.
As this question is MM & WM related, they can give better clarity on this.
Regards,
Maheswaran.

I lost the grey, round shaped rubber placed under the magic trackpad to support clicking. the rubber detached from the trackpad and lost. Where can i find the thing as i am not sure whether apple sell small spare part like this?

i had lost the grey, round shaped rubber placed under my magic trackpad. i think it detached from the trackpad body and lost. where can i get this small spare part as i couldn't find this small spare part in apple store?

Wish I could be more positive but as far as I can see, the solution is to make something for yourself and tape it on. It appears they do not supply a proper replacement and Ifixit, the usual people say they don't have them.
Here is a company that supply rubber feet. It may be worth contacting them and asking if they have something that will do the job.
http://www.wowshop.co.uk/1%20inch%20rubber%20feet?_tt=g_1455876706_6722138569_56 292842294_c&gclid=COvs0q3pysECFavpwgodMU4APA

Apple macbook pro with retina display is having yellow screen problems in which screen is not perfectly white and is yellowish. More over the service frm apple's part is ridiculous as they have faulty spare part. Does ne1 hv email of senior person?

Apple macbook pro with retina display is having yellow screen problems in which screen is not perfectly white and is yellowish. More over the service frm apple's part is ridiculous as they have faulty spare part. Does ne1 hv email of senior person?

Apple service centre employee told me that they do not have this 14 day offer in India.
And My mac book pro is taken in by Service centre people to run test etc and I will be informed the next day if they accept it as a fault or not ?
I feeling ridiculously bad.

Unable to view Spare Part Components in SAP CRM Service Order

Hello All,
We are implementing CRM 7.0 Ehp 2.0
As per the following video it is now possible to integrate the spare part components in the CRM Service Order, using the BOM replication and Product Proposal functionality in SAP CRM
SAP CRM 7.0 - Integration of ERP BOM Information in the CRM Product Proposal
However in our case we are not able to achieve the desired results.
Following configurations are done
1) The BOM is replicated from ECC to CRM the same can be viewed in commpr01
Material 4561 is the main product and 4562 is the component
2) The item category for the main product is YRVS where the customization for structure scope is done
3) For the Product Proposal customization's, I have created a new method schema
4) The transaction type and the sales org are assigned to the method schema
5) However now when I am creating the service order, I enter the sold to party, the product id
6) Next I go to the line item to click on product proposal.
7) The system issues the below message
Please advice if I am missing on any configurations.
Kind Regards
Atul

Hi Raghavendra,
Thanks for your reply, appreciate the same, I have now added the relationship objects as per your post above in comm_hierarchy for the particular category
Now in the product master , I am now able to view the tabs(screen shot attached)
Next I create my BOM in ECC with BOM Usage 5 and save the same
Next I run the initial download for the adaptor object BOM in SAP CRM
When I check in commpr01 for the material 4561 the component and the main material have not come.
Can you please advice further.
Kind Regards
Atul

How to define alternate items for Spare Parts

Hi SAP Gurus,
My Client wants to implement Alternate items for Spare Parts. It is not a Manufacturing unit.
Actually Client wants their Service Partners to know that
ex., Material A is an alternate item to Material B and can be used for servicing without ordering for Material A.
Whether there is any Possibility to define alternate item in the Material Master.
Off course I have gone through the thread and document of Alternate items in BOM.
I would appreciate for providing Clarity on the subject.
Best Regards,
R.Velmurugan

Hi Velmurugan,
As per your requirement i think you can achieve alternate item group functionality ( as your client is not manufacturing)
You can maintain alternate material in MRP 4 view followup material field or basic data 1 old material Field than develop a ZReport extract the same as of client not manufacturing any thing.
Otherwise refer this document if you to go to Follow up material Functionality.
Concept of Discontinuation Data - Material Master and BOM
If you have any other query kindly revert back otherwise close the thread.
Thanks & Regards
Sandeep Kumar Praharaj

Need to know the exact name and P/N of a spare part, cannot find it anywhere.

Hello,
I would like to know the exact name and P/N of the -Touch Panel Control Assembly- for the HP Pavilion dv3510nr?.
or is it -Touch Panel Kit-?
or is it -Multimedia Touch Control Panel-?
Recently, mine got physically damaged and none of the touch buttons work, I cannot even turn the WiFi on. So I need to replace it, but I cannot find this spare part anywhere.
It does not appear on the list of spare parts for this laptop, with any of those names.
Does anybody know where can I find this spare part?
Thanks very much.
Glendy

In case it was not very clear, the spare part that I am referring to is the panel placed above the keyboard, that has touch sensitive buttons for multimedia functions and for enabling the wireless device.
Buttons appear In this order:
MediaSmart button
Audio on/off button
Volume control
Skip backward button
Play/Pause button
Skip forward button
Stop button
WiFi enable/disable
Glendy

CRM Service - ECC Logisitcs Integration (Spare Parts in a Service Order)

Hi Experts,
We have been trying to configure a scenario for CRM Service Orders with SAP ECC logistics integration in CRM 7.0 EHP1.
We are aware of the standard configuration wherein we assign one logistics scenario ( Purchase Requisition or Purchase Order or Reservation) for a specific service organization & Item Category for spare parts in service order.
Our first query : Is it standard that the spare part will be automatically reserved if it is in stock (after ECC availability check from service order) and purchase requisition or purchase order is created only if it is not in stock?
We also understand that while a reservation happens during Service order creation, the goods issue or material withdrawal happens only on service confirmation. If this the case, how will the physical delivery happen to customer? This is our second query.
Please note that we are raising this query only for spare part items in service order and not for sales item in service order.
It would be great if you could help us with this issue.
Responses will be suitably rewarded.
Thanks,
Prish

Hi Pritesh,
Thank you for your prompt reply and help, appreciate the same, we would be going for the scenario where the service order in sap crm has saleable parts, the service order would get replicated to ecc as a sales order and the costs would get booked when the post goods issue is performed after creating the delivery in SAP ECC.
Following are the configurations done
1) Service Order type ZRVW is created in SAP CRM
2) The same service order ZRVW is mapped in SAP ECC
3) The service order in SAP CRM has the following number range and the same is kept internal
4) The same number range is marked as external in SAP ECC in vn01 tcode
5) The number range is assigned to the document type ZRVW in SAP ECC
6) Item category determinations are done in SAP CRM, standard SRVS(Sales items are copied to YRVS)
7) The same item category determination is also set in SAP ECC for Item category group NORM
8) Item category determination is also set for ERLA as item category group in ECC
9) The item category YRVS is set to delivery relevant in SAP ECC
10) The standard schedule line is determined which is CP is relevant for delivery
11) The sales area is also assigned to the document type ZRVW.
12) In SAP CRM, the status profile YCONT is assigned, having the business transaction to be distributed, the status of the same is set to allowed for completed status
13) The status profile has been assigned to the transaction type ZRVW
14) Pricing configurations are also done in sap crm and sap ecc
15) Now I am creating the service order ZRVW in SAP CRM, having saleable parts, customer's and material's exist in both systems having the same sales area, the status is set to completed at item and header level
16) The system is throwing an error when I click on edit
17) When checked In sap ecc the system says that the document does not exist
18 I did open the error in SAP CRM and it says that there are some settings required for billing
Since there is no billing relevance to this scenario in the item category the billing relevance is set to no billing
Please advice further
Kind Regards
Atul

Best place for spare parts for PPC 1.5 Mini?

Hi.
I'm looking for the best place to get spare parts for a Mac Mini PPC G4 1.5GHz on the net. The fan is most likely giving up, because it has recently begun to sound as the bearings in the fan are bad.
Regards,
/Mysteron

Hi Mysteron-
I've used these folks for other projects: MAC-PRO
If you don't see what you need or have questions try giving them a call as they are very helpful.
Luck-
-DP

Spare Parts Mod (CHEAP CHEAP)

Similar Messages

Maybe you are looking for