Spare tips for Lenovo 90W AC/DC Combo Adapter

Just got the Combo Adapter, and wanted to order a spare tip to charge my Motorola cell phone with it. Dumb question - will the spare tip plug into the power cord of the adapter, or do you have to use the dual-charge cable for the tip to work? I rarely charge two items at once, and would prefer to not travel with an extra cord.

yes it works with the T510.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

Top 10 Retain tips for Lenovo XClarity Administrator

1). Subtasks appear to be running when main task is interrupted in Lenovo XClarity Administrator - Lenovo x86 servers
2). Learned EN4172 port pattern cannot be edited from the adapter table in Lenovo XClarity Administrator - Lenovo x86 servers
3). Chassis Node hard reset and IOM, CMM re-seat not supported on Lenovo XClarity Administrator - Lenovo x86 servers
4). Network Access Configuration unsavable by default due to invalid host name in advanced tab in Lenovo XClarity Administrator - Lenovo x86 servers
5). Firmware updates may fail after restart of Lenovo XClarity Administrator - Lenovo Flex System Enterprise Chassis
6). Primary CMM status in XClarity Administator UI may differ from CMM chassis map - Lenovo XClarity
7). System-Level power consumption History - Lenovo XClarity
8). Cryptic message when applying power actions to demo server - Lenovo XClarity
9). 'Create a new pattern from an existing server' fails on multinode system in Lenovo XClarity Administrator - Lenovo x86 servers
10). XClarity: Intel X710 extended port patterns for adapter are not correctly learned - Lenovo x86 Servers

I have upgraded from 2gb to 4gb RAM (Vista bu 64bit) but T400 was still slower than the old MSI notebook. I had MSI 12", 1.8ghz sempron, 2gb RAM, 160HDD with UBUNTU 8.04. Now T400 with P8700, 4gb DDR3, discrete Ati 3470. What really helped me was NOT using Vista at all! I'm now on RC of Windows 7, it's much faster (boot, turning off, and aslo system respose is I think 4 times shorter than Vista has). Just wanted you to know how are these systems different. But if I had a choice, I would go for some linux distribution. Sadly fingerprint reader and thinkvantage software are not supported
Message Edited by popo666 on 07-11-2009 10:20 AM

90W Ultraslim AC/DC Combo Adapter Making Clicking Noise

Hi. I have a brand new T420s with the 90W Ultraslim AC/DC combo adapter. When I have it plugged into the system it makes a clicking noise. When I unplug it from the T420s it has a very faint, high pitched humming noise. Is this normal?
Thanks!

no it is not normal. Call warranty for replacement.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Looping through an array to get the index for each measure in a combo box

Hi folks,
I am working on a web application that has two combo boxes, one for year (called yearcombo) and for measures (called myURL) for that selected year, and also two radiobuttons (in radioBtnGroup). I have two years and a bunch of measure for each year. I have a map tool tip that when you mouse over the county you see a measure for that specific year. However I have a bunch of measures for each year and I want to be able to loop through the measures (which are in an array collection inside a combobox) so my "if" expression can find every selectedIndex and bring me the tool tip for that selected measure for that selected radio button. Right now I would have to create if statements for each measure (each selectedIndex inside the myURL combobox)and each radiobutton (inside the radioBtnGroup) instead of creating a if expression to get a map tip tool for each measure. I know I would have to create a loop to search for these indexes and enter that in the if expression and also change the graphic.attributes to reflect the right measure or index selected. Do you API for Flex wizards can give me any tips on how to code this according to my code below ? Any help is greatly appreciated! (the print scree is attached)
Below is the code snippet:
if (yearcombo.selectedItem.year == "2007" && myURL.selectedIndex == 0 && radioBtnGroup.selectedValue == 0)
fLayer.definitionExpression = "DATA_YEAR_TXT like '2007'"
var graphic:Graphic = Graphic(event.currentTarget);
graphic.symbol = mouseOverSymbol;
var htmlText:String = graphic.attributes.htmlText;
var textArea:TextArea = new TextArea();
try{
textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForDirIndOut.toString()
myMap.infoWindow.content=textArea
myMap.infoWindow.label = graphic.attributes.NAME;
myMap.infoWindow.closeButtonVisible = false;
myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
catch(error:Error) {
trace("Caught Error: "+error);
And below is the combo boxes with the arrays
<mx:FormItem label="Year :" >
<mx:ComboBox id="yearcombo" selectedIndex="0" labelField="label" width="100%" change="changeEvt(event)" >
<mx:ArrayCollection id="year" >
<fx:Object label="2007" year="2007" />
<fx:Object label="2009" year="2009" />
</mx:ArrayCollection>
</mx:ComboBox>
</mx:FormItem>
<mx:FormItem label="Measure:">
<mx:ComboBox id="myURL" selectedIndex="8" width="80%" mouseOver="clickEv2(event)" close="closeHandler(event)">
<mx:ArrayCollection id="measures" >
<fx:Object id="forindout07" labeltext="2007 Forestry Industry Output" label="Forestry Industry Output " value="RADIO_BUTTONS/TFEI_07_forest_industry_output" year="2007" />
<fx:Object id="foremp07" label="2007 Forestry Employment " value="RADIO_BUTTONS/TFEI_07_forest_employment" year="2007" />
<fx:Object id="forlabinc07" label="2007 Forestry Labor Income " value="RADIO_BUTTONS/TFEI_07_forest_labincome" year="2007" />
<fx:Object id="forindbustax07" label="2007 Forestry Indirect Business Tax" value="RADIO_BUTTONS/TFEI_07_forest_business_tax" year="2007" />
<fx:Object id="forindout09" label="Forestry Industry Output " value="RADIO_BUTTONS/TFEI_09_forest_industry_output" year="2009" />
<fx:Object id="foremp09" label="2009 Forestry Employment " value="RADIO_BUTTONS/TFEI_09_forest_employment" year="2009" />
<fx:Object id="forlabinc09" label="2009 Forestry Labor Income " value="RADIO_BUTTONS/TFEI_09_forest_labincome" year="2009" />
<fx:Object id="forindbustax09" label="2009 Forestry Indirect Business Tax" value="RADIO_BUTTONS/TFEI_09_forest_business_tax" year="2009" />
<fx:Object id="blank" label=" " />
</mx:ArrayCollection>

And here is the entire code
<?xml version="1.0" encoding="utf-8"?>
<mx:Application
 xmlns:fx="http://ns.adobe.com/mxml/2009"
 xmlns:s="library://ns.adobe.com/flex/spark"
 xmlns:mx="library://ns.adobe.com/flex/mx"
 xmlns:esri="http://www.esri.com/2008/ags"
 paddingBottom="8" paddingLeft="8"
 paddingRight="8" paddingTop="8"
 backgroundColor="0xffffff"
 layout="vertical" >
 
<fx:Declarations>
 <esri:SimpleFillSymbol id="mouseOverSymbol" alpha="0.5" color="0x808080">
 <esri:SimpleLineSymbol width="0" color="#000000"/>
 </esri:SimpleFillSymbol>
 <esri:SimpleFillSymbol id="defaultsym" alpha="0.01" color="#E0E0E0" >
 <esri:SimpleLineSymbol width="1" color="#000000"/>
 </esri:SimpleFillSymbol>
 
</fx:Declarations>
 <fx:Script>
 <![CDATA[
 import com.esri.ags.Graphic;
 import com.esri.ags.SpatialReference;
 import com.esri.ags.esri_internal;
 import com.esri.ags.events.GraphicEvent;
 import com.esri.ags.geometry.Extent;
 import com.esri.ags.layers.ArcGISDynamicMapServiceLayer;
 import com.esri.ags.symbols.SimpleFillSymbol;
 import com.esri.ags.symbols.SimpleLineSymbol;
 import flash.utils.flash_proxy;
 import mx.collections.ArrayCollection;
 import mx.controls.Alert;
 import mx.controls.RadioButton;
 import mx.controls.TextArea;
 import mx.events.DropdownEvent;
 import mx.events.ItemClickEvent;
 import mx.rpc.Fault;
 import mx.rpc.events.FaultEvent;
 import flash.display.Sprite;
 import flash.events.ErrorEvent;
 import flash.events.MouseEvent;
 private function closeHandler(evt:DropdownEvent):void {
 myLabel.text = ComboBox(evt.target).selectedItem.labeltext;
 private function loadLayerName():void
 myLegend.layers = null;
 layerPanel.removeAllChildren();
 //loop through each layer and add as a radiobutton
 for(var i:uint = 0; i < (dynamicLayer.layerInfos.length); i++)
 var radioBtn:RadioButton = new RadioButton;
 radioBtn.groupName = "radioBtnGroup";
 radioBtn.value = i;
 radioBtn.label = dynamicLayer.layerInfos[i].name;
 if (dynamicLayer.layerInfos[i].name == "Direct Impact (Million $)")
 radioBtn.label = "Direct Impact";
 else if (dynamicLayer.layerInfos[i].name == "Total Impact (Million $)")
 {radioBtn.label = "Total Impact";
 else if (dynamicLayer.layerInfos[i].name == "Total Impact (Jobs)")
 {radioBtn.label = "Total Impact";
 else if (dynamicLayer.layerInfos[i].name == "Direct Impact (Jobs)")
 {radioBtn.label = "Direct Impact";
 else
 {radioBtn.visible= false;
 layerPanel.addChild(radioBtn);
 /* myDividerBox.getDividerAt(0).visible = false; */
 //set the visible layer the first radio button
 radioBtnGroup.selectedValue = 0;
 dynamicLayer.visibleLayers = new ArrayCollection([0]);
 myLegend.layers = [dynamicLayer];
 myLegend.visible = true;
 private function radioClickHandler(event:ItemClickEvent):void
 myLegend.layers = null;
 // update the visible layers to only show the layer selected
 dynamicLayer.visibleLayers = new ArrayCollection([event.index]);
 myLegend.layers = [dynamicLayer];
 private function changeEvt(event:Event):void {
 if (yearcombo.selectedItem.year == "2007")
 measures.filterFunction=filter1
 measures.refresh()
 myURL.dataProvider=measures
 else if (yearcombo.selectedItem.year == "2009")
 measures.filterFunction=filter2
 measures.refresh();
 public function filter1(item:Object):Boolean
 if (item.year=="2007") return true
 else return false
 public function filter2(item:Object):Boolean
 if (item.year=="2009") return true
 else return false
 private function clickEvt(event:Event):void {
 if (yearcombo.selectedItem.year == "2007")
 measures.filterFunction=filter3
 measures.refresh()
 myURL.dataProvider=measures
 else if (yearcombo.selectedItem.year == "2009")
 measures.filterFunction=filter4
 measures.refresh();
 public function filter3(item:Object):Boolean
 if (item.year=="2007") return true
 else return false
 public function filter4(item:Object):Boolean
 if (item.year=="2009") return true
 else return false
 private function clickEv2(event:Event):void {
 if (yearcombo.selectedItem.year == "2007")
 measures.filterFunction=filter5
 measures.refresh()
 else if (yearcombo.selectedItem.year == "2009")
 measures.filterFunction=filter6
 measures.refresh();
 else if (yearcombo.selectedItem.year == 2007 && myURL.selectedIndex==8)
 myLegend.layers = null;
 layerPanel.removeAllChildren();
 public function filter5(item:Object):Boolean
 if (item.year=="2007") return true
 else return false
 public function filter6(item:Object):Boolean
 if (item.year=="2009") return true
 else return false
 /* IF YOU WANT TO INCLUDE OTHER VALUES IN THE MAP TOOLTIP LIKE COUNTY NAME AND THE LABEL OF THE SELECTED ITEM
 if (myURL.selectedIndex==0)
 myTextArea.htmlText = "County: " + gr.attributes.NAME + "\n"
 + "Measure: " + myURL.selectedItem.label + gr.attributes.ForDirIndOut.toString()
 public function fLayer_graphicAddHandler(event:GraphicEvent):void
 event.graphic.addEventListener(MouseEvent.MOUSE_OVER, onMouseOverHandler);
 event.graphic.addEventListener(MouseEvent.MOUSE_OUT, onMouseOutHandler);
 public function onMouseOverHandler(event:MouseEvent):void
 if (yearcombo.selectedItem.year == "2007" && myURL.selectedIndex == 0 && radioBtnGroup.selectedValue == 0)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2007'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForDirIndOut.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2007" && myURL.selectedIndex == 0 && radioBtnGroup.selectedValue == 1)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2007'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForTotImpIndOut.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2007" && myURL.selectedIndex == 1 && radioBtnGroup.selectedValue == 0)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2007'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForDirEmp.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2007" && myURL.selectedIndex == 1 && radioBtnGroup.selectedValue == 1)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2007'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForTotImpEmp.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2007" && myURL.selectedIndex == 2 && radioBtnGroup.selectedValue == 0)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2007'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForDirLabInc.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2007" && myURL.selectedIndex == 2 && radioBtnGroup.selectedValue == 1)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2007'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForTotImpLabInc.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2007" && myURL.selectedIndex == 3 )
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2007'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForIndirBusTax.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2009" && myURL.selectedIndex == 0 && radioBtnGroup.selectedValue == 0)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2009'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForDirIndOut.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2009" && myURL.selectedIndex == 0 && radioBtnGroup.selectedValue == 1)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2009'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForTotImpIndOut.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2009" && myURL.selectedIndex == 1 && radioBtnGroup.selectedValue == 0)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2009'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForDirEmp.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2009" && myURL.selectedIndex == 1 && radioBtnGroup.selectedValue == 1)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2009'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForTotImpEmp.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2009" && myURL.selectedIndex == 2 && radioBtnGroup.selectedValue == 0)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2009'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForDirLabInc.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2009" && myURL.selectedIndex == 2 && radioBtnGroup.selectedValue == 1)
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2009'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForTotImpLabInc.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 if (yearcombo.selectedItem.year == "2009" && myURL.selectedIndex == 3 )
 fLayer.definitionExpression = "DATA_YEAR_TXT like '2009'"
 var graphic:Graphic = Graphic(event.currentTarget);
 graphic.symbol = mouseOverSymbol;
 var htmlText:String = graphic.attributes.htmlText;
 var textArea:TextArea = new TextArea();
 try{
 textArea.htmlText = myURL.selectedItem.label + graphic.attributes.ForIndirBusTax.toString()
 myMap.infoWindow.content=textArea
 myMap.infoWindow.label = graphic.attributes.NAME;
 myMap.infoWindow.closeButtonVisible = false;
 myMap.infoWindow.show(myMap.toMapFromStage(event.stageX, event.stageY));}
 catch(error:Error) {
 trace("Caught Error: "+error);
 public function onMouseOutHandler(event:MouseEvent):void
 var gr:Graphic = Graphic(event.target);
 gr.symbol = defaultsym;
 myMap.infoWindow.hide();
 ]]>
 </fx:Script>
 <fx:Style>
 @namespace esri "http://www.esri.com/2008/ags";
 @namespace s "library://ns.adobe.com/flex/spark";
 @namespace mx "library://ns.adobe.com/flex/mx";
 @namespace esri "http://www.esri.com/2008/ags";
 @namespace components "com.esri.ags.components.*";
 components|InfoWindow
 content-background-alpha : 0.4;
 background-color : #4A7138;
 background-alpha : 0.7;
 border-style : solid;
 </fx:Style>
 <mx:HBox width="930" height="800" id="mapHbox" horizontalAlign="center" >
 <mx:HBox width="80">
 </mx:HBox>
 <mx:HBox id="myHBox" width="800" height="600" backgroundColor="0xffffff" >
 <mx:VBox height="590" width="358" >
 
 <mx:Canvas height="100%" width="100%" backgroundColor="0xffffff" >
 <esri:Map id="myMap" openHandCursorVisible="false"
 height="100%"
 logoVisible="false"
 doubleClickZoomEnabled="false"
 scrollWheelZoomEnabled="false"
 zoomSliderVisible="false"
 scaleBarVisible="false" scale="4000000" >
 <esri:extent>
 <esri:Extent xmin="-10736651.061900" ymin="4024099.909700" xmax="-10409195.669800" ymax="3440153.831100" >
 <esri:SpatialReference wkid="102100"/>
 </esri:Extent>
 </esri:extent>
 <esri:ArcGISDynamicMapServiceLayer id="dynamicLayer2"
 url="http://tfs-24279/ArcGIS/rest/services/RADIO_BUTTONS/counties_layer/MapServer" />
 <esri:ArcGISDynamicMapServiceLayer id="dynamicLayer" name=" "
 alpha="1"
 load="loadLayerName()"
 url="http://tfs-24279/ArcGIS/rest/services/{myURL.selectedItem.value}/MapServer" />
 <esri:FeatureLayer id="fLayer"
 graphicAdd="fLayer_graphicAddHandler(event)"
 mode="snapshot"
 outFields="*"
 symbol="{defaultsym}"
 url= "http://tfs-24279/ArcGIS/rest/services/RADIO_BUTTONS/feature_layer_0709_five/FeatureServer/ 0" />
 </esri:Map>
 </mx:Canvas>
 
 </mx:VBox>
 <mx:VBox height="590" width="20" >
 </mx:VBox>
 <mx:Canvas height="500" width="400" backgroundColor="0xffffff"
 horizontalScrollPolicy="off"
 verticalScrollPolicy="off" >
 <mx:VBox width="420" height="50%" paddingLeft="5" paddingTop="10" paddingRight="10" paddingBottom="10"
 verticalGap="8">
 <mx:Form >
 <mx:FormItem label="Year :" >
 <mx:ComboBox id="yearcombo" selectedIndex="0" labelField="label" width="100%" change="changeEvt(event)" >
 <mx:ArrayCollection id="year" >
 <fx:Object label="2007" year="2007" />
 <fx:Object label="2009" year="2009" />
 </mx:ArrayCollection>
 </mx:ComboBox>
 </mx:FormItem>
 <mx:FormItem label="Measure:">
 <mx:ComboBox id="myURL" selectedIndex="8" width="80%" mouseOver="clickEv2(event)" close="closeHandler(event)">
 <mx:ArrayCollection id="measures" >
 <fx:Object id="forindout07" labeltext="Forestry Industry Output" label="Forestry Industry Output " value="RADIO_BUTTONS/TFEI_07_forest_industry_output" year="2007" />
 <fx:Object id="foremp07" label="Forestry Employment " value="RADIO_BUTTONS/TFEI_07_forest_employment" year="2007" />
 <fx:Object id="forlabinc07" label="Forestry Labor Income " value="RADIO_BUTTONS/TFEI_07_forest_labincome" year="2007" />
 <fx:Object id="forindbustax07" label="Forestry Indirect Business Tax" value="RADIO_BUTTONS/TFEI_07_forest_business_tax" year="2007" />
 <fx:Object id="forindout09" label="Forestry Industry Output " value="RADIO_BUTTONS/TFEI_09_forest_industry_output" year="2009" />
 <fx:Object id="foremp09" label="Forestry Employment " value="RADIO_BUTTONS/TFEI_09_forest_employment" year="2009" />
 <fx:Object id="forlabinc09" label="Forestry Labor Income " value="RADIO_BUTTONS/TFEI_09_forest_labincome" year="2009" />
 <fx:Object id="forindbustax09" label="Forestry Indirect Business Tax" value="RADIO_BUTTONS/TFEI_09_forest_business_tax" year="2009" />
 <fx:Object id="blank" label=" " />
 </mx:ArrayCollection>
 </mx:ComboBox>
 </mx:FormItem>
 </mx:Form>
 <mx:VBox id="layerPanel" width="50%" height="8%" verticalGap="3" paddingLeft="17">
 <mx:RadioButtonGroup id="radioBtnGroup" itemClick="radioClickHandler(event)" />
 </mx:VBox>
 <mx:VBox paddingLeft="17" height="50%" >
 <mx:Canvas id="legendPanel" width="100%" >
 <mx:Label id="myLabel" text=" " fontWeight="bold" />
 <esri:Legend id="myLegend"
 layers="{[dynamicLayer]}"
 map="{myMap}" visible="false"
 respectCurrentMapScale="false"/>
 </mx:Canvas>
 <mx:TextArea width="275" borderAlpha="0" height="200" >
 <mx:htmlText >
 <![CDATA[Note: Counties in white indicate either no data is available for that measure or the data has been supressed due to confidentiality.
 ]]>
 </mx:htmlText>
 </mx:TextArea>
 </mx:VBox>
 </mx:VBox>
 </mx:Canvas>
 </mx:HBox>
 </mx:HBox>
</mx:Application>

Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on X61/X61s

Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD.
This information can help address blue screen errors specifically
related to Turbo Memory, but may not solve errors related to other
issues. Please read through the instructions completely, make sure they
apply to your system, and after attempting the solutions please post
back with your feedback for the community.
Some users may experience random blue screen errors with ThinkPad
systems running Windows Vista with Intel Turbo Memory hardware. These
blue screens may occur during normal usage on the system or they may
occur when booting into Windows Vista. Blue screens related to the
Intel Turbo Memory hardware may reference a stop code of 8086 with
memory address locations of {0, 0, 0, 0}.
There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
Step 1: Update Intel Turbo Memory Driver
If the driver version is before version 1.0.1.1004-7.0.3.1001, please
update to this version.
To determine what version of the Intel Turbo Memory driver is installed:
1.    Click Start, then click Control Panel.
2.    Click System and Maintenance.
3.    Click System.
4.    Click Device Manager.
5.    Expand the Storage controllers category.
6.    Double-click Intel Flash Cache Logic Chip.
7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
The new driver and installation instructions can be found here.
Note: The Intel Matrix Storage Driver is updated with this package.
Step 2: BIOS version
If your BIOS version is older than those listed below, please update to the version listed.
How to check your BIOS version:
Turn off the system.
Turn on the system.
While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
The
BIOS Setup Utility menu will be displayed. If you have set a supervisor
password, the BIOS Setup Utility menu appears after you enter the
password.
Check BIOS Version and Embedded Controller Version.
Turn off the system.
System BIOS versions:
ThinkPad X61 or X61s - BIOS version 1.06 (7NET25WW)
Please
remember that these updates do not solve every possible system blue
screen, but they do resolve several problems related to the Intel Turbo
Memory driver.
Tim Supples
Lenovo Social Media
Got a question? Don't PM me, post it on the forum!
Lenovo Blogs
X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

Dear Tim,
First off, many thanks for the tips for resolving BSOD with Vista + Turbo Memory on X61. I've been suffering from this BSOD for countless times since I bought in my X61 7673-CW9 in April 2008.
Even prior to having the pleasure to visit this wonderful forum, I followed both steps as indicated, and updated my Intel Turbo Memory driver to 1.5.0.1013 and my BIOS to 7NETB4WW (2.14). However, the BSOD recurrs.
For the past two months, I've recovered my system to factory default settings using Rescue and Recovery for over twenty times, each time with the latest Intel Turbo Memory driver and BIOS. Notwithstanding that, BSOD recurrs.
During these painful experiences, I tried two options: 1) making my X61 up-to-date by using System Update and Windows Update (including Vista SP1 or excluding Vista SP1); 2) keeping my X61 the status as factory default (i.e. without updating through either System Update or Windows Update (the automatic/scheduled update function of both is turned off)). In either case, BSOD recurrs.
I'm 100% positive that the BSOD does not arise from any hardware or software/firmware I install. I never install any hardware (e.g. RAM). And, it is not caused by any software/firmware I install: the clear and unequivocal evidence is that at one time,I encountered BSOD while having restored back to factory setting and booting for the first time.
I live in Taiwan, and I seldom heard this BSOD here.  All of my friends (as most of Taiwan residents) using X61 operate in Traditional Chinese environment, whereas I operate in English environment. In Taiwan, when booting for the first time after purchase/recovery, the Windows Vista Business system provides for lanuage choice (Traditional Chinese or English), and, once chosen, the language cannot be altered later on (unless, of course, the system is restored back to factory default settings).
My system specs are the same as the day I purchased it and are listed below (as I'm not sure if my machine type X61 7673-CW9 is applicable outside Taiwan):
Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz
Memory: 1.00 G.B.
System: Windows Vista Business (32-bit)
Hard Drive: 160 G.B. @ 7,200 r.p.m.
And, of course, with Intel Turbo Memory 1 G.B.
I contacted the Lenovo support staff here in Taiwan for countless times, but they seem to be clueless. I learned that some friends at this forum downgraded their OS back to Windows XP, but I chose not to. The reason is simple: my purchase price for X61 7673-CW9 includes the Intel Turbo Memory, which cannot function under Windows XP (at least so far).
Therefore, I just wish to share my experience here and perhaps I can get some advice from you and other friends here. Any advice will be tremendously and enormously appreciated.
Kevin Chen @ Taiwan

IGo charger tip for HP 15

I have an iGo universal charger I bought recently as a spare in case of something happening to the factory charger. I noticed none of the tips worked. Is there a tip for the iGo I have that will fit my PC? If there is, I just need the tip # for it.
TW45

Yes there is only the dv6700z (AMD) and dv6700t (Intel) and they use the same power supply.

Configure wireless for Lenovo X60 on Fedora 8, anyone?

Has anyone had any luck getting the built-in wireless card to work for lenovo x60 on Fedora?
Any tip is appreciated.
-tito

Hi,
thanks for the quick reply.
there is a wireless router at my house where it communicates with my PC via the wireless connection. so yes, the wireless capability of my router works.
I have no idea which card is built-in but the Lenovo X60 is of type 1706 and 85U mode. How can you find out for sure from a command or if that is even possible?
you suggested to create and alias in /etc/modprobe.conf for this wireless device once the driver has been installed as follows:
"alias ath0 ath_pci"
do you mean eth0? or ath0 is a new device name that i m not aware of. to my surprise, the ethernet is labeled as eth1.
I'll try to yum install the driver tonight when i get home.
BTW, I am having a similar problem with an IBM T42 running fedora 7. i don't normally use wireless on this laptop because the wireless router (at work) can be flaky at times but it would be nice to install/enable wireless card for it in case i need to bring it home to do some work. I could very well use the wired connection at home with this T42 as well but it would be nice to use the wireless connection instead.
Any hint/tip would be much appreciated.
here is the current ifconfig and modprobe.conf of the T42
$ ifconfig 0a
0a: error fetching interface information: Device not found
[qnguyen@qlaptop Download]$ ifconfig -a
eth0      Link encap:Ethernet HWaddr 00:0D:60:74:3E:0E
          inet addr:64.89.226.13 Bcast:64.89.226.255 Mask:255.255.255.0
          inet6 addr: fe80::20d:60ff:fe74:3e0e/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:89029 errors:0 dropped:0 overruns:0 frame:0
          TX packets:48293 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:57481828 (54.8 MiB) TX bytes:7708199 (7.3 MiB)
          Base address:0x8000 Memory:c0220000-c0240000
eth1      Link encap:Ethernet HWaddr 00:0E:35:1A5:15
          BROADCAST MULTICAST MTU:1500 Metric:1
          RX packets:1331960 errors:0 dropped:0 overruns:0 frame:0
          TX packets:32805 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
          Interrupt:11 Base address:0x2000 Memory:c0214000-c0214fff
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:6299 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6299 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:37966927 (36.2 MiB) TX bytes:37966927 (36.2 MiB)
$ more /etc/modprobe.conf
alias eth0 e1000
alias scsi_hostadapter ata_piix
alias eth1 ipw2200
alias snd-card-0 snd-intel8x0
options snd-card-0 index=0
options snd-intel8x0 index=0
Notice, it seems to me that driver has already been loaded for the wireless eth1 but it doesn't pick up the signal. eth0 is the hard wire. perhaps, there is something i need to tweak?

X-series tablets: Felt tips for the pen?

Has anybody tried the hard felt tips for the Wacom pen to prevent scratching the screen?
Or! Perhaps found another alternative nib that doesn't scratch the screen?
I just got my screen replaced (bright dots on it...), and it just looks too good to have a protector on. I used to have a Photodon protector, but ended up scratching (the keyboard and I...) it in the long run.
Cheers,
.k
http://vanhavirta.fi/

DUTCHvanAtlanta wrote:
Shipping for my order has just been delayed for a week and a half. If this happens again, it may become necessary to cancel this thing.
I hope Lenovo computers are better than their order system. After receiving notice that the ship date had been postponed from 6 Jan to 17 Jan, it shipped on 8 Jan. I hope they have their manufacturing act together better than how they handle orders. Their order system seems like it's a http://en.wikipedia.org/wiki/Chinese_fire_drill being directed by the Keystone Kops.
Moderator edit: Changed year in subject to 2012.

I have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

i have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

You just need a powered hub.. if you already use one then fine.
Plug in just about any external hard disk will work fine. Format has to be readable by the TC.. ie fat32.. or much better HFS+.. plug it into a Mac to prepare the drive.
Pick whatever size suits.. nowadays 2TB are most economical.
WD, Seagate have goobled up all the minor players.. so pick one.
Whatever suits your budget and asthetics.
NOTE.. The USB on the TC is fine for printers.. IMHO it is the wrong way to go with USB disks.. use the internal disk of the TC.. USB is less than half the native speed plugged into a Mac.. TC to USB is slow.. far slower than internal drive.. or using external drive as external.

JK Adobe TV - Top 5 Tips for Working with Vectors in CC

Julieanne Kost has just blogged about her Adobe TV video on working with shapes and paths in Photoshop CC. It's actually not that new to Adobe TV, and has already had a lot of views, but we get a lot of questions here on the subject with CC, and there are some nice little tips in it. I certainly learned a couple of things. :-)
http://blogs.adobe.com/jkost/2014/01/top-5-tips-for-working-with-vectors-in-photoshop-cc.h tml
http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/top-5-tips-for-working- with-vectors-in-photoshop-cc/

My apologies, but I really had no interest in a member's "answer", especially one that is so unhelpful. Assuming that you were responding to me (we are the only two commenter's at this point), I would not be inclined to read the Creative Cloud offers since this is something that I am not interested in. I bought the product the first day of offer, I did not rent it....just like I have in all the years past.

I have a Macbook Pro 15" that is three and a half years old. Although it has slowed a bit, it still runs well and runs every program I need. Any tips for how to keep this old computer running well and in good health?

I have a Macbook Pro 15" that is three and a half years old. Although it has slowed a bit, it still runs well and runs every program I need. Any tips for how to keep this old computer running well and in good health?
I have a 250 gig drive and try to keep at least 100 gigs unused at all times, 4 GB 667 MHz DDR2 SDRAM memory, back up with Time Machine and CrashPlan, and have OS X 10.7.3.
This was my first Mac since an old Apple II GS. After that I used PC's and got really good at reformatting, replacing drives, reinstalling, defragging, resolving software conflicts, etc. Since switching back to Macs (five in my extended family now), I haven't had to do any of those things. So, although, the cost is three times as much, the aggrevation has been ten times less.
I'm retired and living on a fixed income and would therefore like to keep this computer running as opposed to constatntly upgrading.
That said, any tips?
Thanks
It does have a crack on the left of the screen case about 3/4'' up from the bottom. I've posted that as another question.

Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Adding more RAM, if feasible, and a new, faster hard drive may also help pep it up a little.

Tips For Solving the Mac OS X Lion Slowness (Lots of Beach Balls)

Hi Folks,
Just a quick list of tips for this issue that some of Mac OS X Lion users face.
The main symptom is that we get the Beach Ball on almost any task, it takes 4, maybe five times more time to do what we need to do. So depending on the schedule, it can drive us crazy. I was facing that, and started to think that Lion was a Windows Vista relative.
Please remind that the tips below involve backing up and restoring your system. If you are not careful, you may lose everything. You are responsible for your acts. Be cautious!
How I solved my issue:
1) Checked for Disk Permissions and the Disk itself:
- Applications / Utilities / Disk Utility:
- Click on your disk, and then VERIFY DISK. If everything is OK, move on. If it is not, REPAIR DISK.
- Now click on VERIFY DISK PERMISSIONS. If everthing is OK, move. If not, Repair.
This step 1 is to make sure that your slowness is due to something related to the OS itself and not to permissions/disk.
If this solves the slowness, then you are OK. Now further steps are necessary. In my case, this just helped a little bit. The beach-balling reduced by 20% only. Still too slow.
2) Do a full backup of your system.
I used Time Machine. Make sure you have all of your applications closed. So the backup will be full. If you fail to do a good backup, you will lose everything! Make sure you do a good one. Maybe do it twice on 2 different disks! Now you have been warned.
3) Do a Full Restore of your entire system.
Now, get that Install CD that came with your Mac,
- Put it on your drive, shut down your computer.
- While holding the C key, press the start button of your Mac. It will boot using the Install CD that came with your Mac.
To recover your entire system:
Connect your Time Machine backup disk to your computer. If you’re restoring your system because of a problem with your startup disk, make sure the disk has been repaired or replaced.
Insert your Mac OS X Install disk, and double-click the Install Mac OS X icon.
In the Installer, choose Utilities > Restore System from Backup.
In the Restore Your System dialog, click Continue.
Select your Time Machine backup volume.
Select the Time Machine backup you want to restore.
Follow the onscreen instructions.
4) Remove the CD, and boot.
When I did that, the system came back very fast and responsive. No more beach balls (only on the really-intensive tasks), and everything was back to normal.
5) So, what was it anyways?
Before doing this Backup/Restore, I was getting lots of DISK I/O ERRORS, specially during boot time (you can check that by shutting down your mac, powering it back on and imediatelly pressing Command-V - Verbose Mode).
Sure, the first thing in mind was that I had a faulty hard drive, but I checked it several times for errors (via Disk Utility), and nothing showed up.
So I decided to do a full backup/restore of the system. And it solved it, at least for me.
My config:
MacBook Pro (2009 edition) - 5 GB RAM - 640 GB HD - Mac OS X 10.7
Regards.

Also my mac will not complete my 5 software updates, no idea which software, but it said it could not do it. Also backing up with time machine had failed twice today. Thanks

I've got a power cable from my 2011 macbook air which I would like to use as a spare cable for my new 2013 macbook pro, but the design has changed. Is there an adapter available so that I can use it?

I've got a power cable from my 2011 macbook air which I would like to use as a spare cable for my new 2013 macbook pro, but the design has changed. Is there an adapter available so that I can use it?

Welcome to the Apple Support Communities
Use the MagSafe to MagSafe 2 Converter > http://store.apple.com/us/product/MD504ZM/A/magsafe-to-magsafe-2-converter?fnode =51 However, note that the MacBook Air doesn't provide enough energy to charge the MacBook Pro with Retina display, so it could not work

Exchange 2013 with Outlook 2013 - Not getting pop-up or mail tips for attachments exceeding max size

Our environment is Exchange Server 2013 CU3 and Outlook 2013 in cached mode. We have a transport rule that sets the max attachment size to 20 mb.
If someone sends an attachment larger than 20 mb they receive an NDR letting them know the message wasn't delivered because it exceeded the max attachment size. We would like for the user to be prevented from sending the message at all or to at least
get a mail tip before they try to send the message. The Outlook pop-up message that says "The file you're attaching is bigger than the server allows. Try putting the file in a shared location ..." isn't being generated for us. Not sure if that's
because we're running Exchange or not. If that pop-up isn't going to work it would be nice if the user could at least get a mail-tip warning them that the attachment exceeds the limit. But it doesn't look likes there's a mail-tip for attachment size, only
for message size. And, I've found that the message size mail-tip only works if the limit is set on the user. It doesn't seem to work if the limit is set via a transport rule.
Has anyone else gotten Outlook to present the pop-up or a mail-tip when exceeding attachment size? Any help you can offer would be greatly appreciated.

Thanks but I performed all of those trouble shooting prior to posting to the forum. But, I have found the answer!
After referring to this article;
http://technet.microsoft.com/en-us/library/bb124345(v=exchg.150).aspx
I removed the 10mb default limits from the organization config and chose to set the attachment and message size limits in our environment via transport
rules instead. That is the only way you can actually set an attachment size limit.
I had read this article several times searching for an answer;
http://support.microsoft.com/kb/2813269#appliesto
The key is here;
"If you are using an Exchange Server account, the 20-MB attachment
limit for Internet email accounts is not used by Outlook 2013. Instead, Outlook uses the limit that is configured on your Exchange server. To modify the setting that is used to control the size of a message that is sent through an
Exchange Server account, follow these steps."
The steps that follow are for Exchange 2010 but they show setting organization limits not server limits. And note that it
says the size of a message, not the size of an attachment. Since mail-tips for message size are not displayed when the limit is set via the transport rules I thought it
was possible that the same inconsistency might apply to the attachment pop-up warning. I set the organization limits and voila! The pop-up now displays when an attachment that exceeds the message size limit is added to a message.
This is exactly what I wanted. Now users won't fill up their sent items trying to send large attachments that just bounce anyway.
It would be wonderful if Microsoft would provide information about what features of Outlook are affected when you apply message size limits at the
various levels.

Where can I buy a keyboard from for Lenovo N500, keyboard?

Where can I buy a keyboard from for Lenovo N500, 4 GB of memory, 2 GHz dual core, Windows 7 32 bit, conexant high definition smart audio 221, 250 GB hard disk, vista experience rating 3.5.
Any help appreciated.

ebay.. and many online stores are your friends in this case.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Spare tips for Lenovo 90W AC/DC Combo Adapter

Similar Messages

Maybe you are looking for