Sparse disk, with elastic dinamic capacity, works only if made with carbon copy

I am trying to create a sparse image disk to put unlimitlessly all projects from final cut pro, when i create it with carbon copy cloner I achieve my goal but i cant obtain same result with utility disk, why, it seems I use same setting

Without details, it's anyone's guess what your problem might be. Post the Disk Utility steps or the diskutil commands and maybe someone can help.

Similar Messages

WiFi MiniPCI card works only in "Safemode with network"

The MiniPCI card AR5001Xplus works only in "Safemode with network" (windowsXP-home-SP2 and all recent updates).
In "normal" mode it freezes my notebook after a few seconds.

Hello
Why you dont give us more information about your problem? Who knows which unit you have? Is the card original part or did you built in later?
At the moment I can just recommend you to reinstall the unit with recovery media. If the problem persists try to install the card separately with right driver. Other way you must change the WiFi card or test it with other one.
Give us more info.

My laptop hard drive crashed - when I go to sync my iPhone it says that my phone is already synced with another computer and can only be synced with one computer at a time.

My Dell laptop hard drive crashed - when I go to sync my iPhone it says that my phone is already synced with another computer and can only be synced with one computer at a time. When I hit sync is says it will erase my phone and sync with the new computer which is blank. How do I get my phone to sync my contacts, pics, apps etc. over to my new hard drive without losing anything.

Yes, so what's confusing... Did you not restore the backup of your data, contacts, pics, apps, music, etc. to the new hard drive after you replaced it or reformatted it or whatever you did? If so, then you can just sync your data back.
If not, please try searching the forum. This has been addressed hundreds of times here.

IPod works only 2 hours with new battery

I allready replaced my iPod battery and still my iPod works for only 2 hours or something when fully charged. It should work for about 10 hours! Is it possible that the iPod has a short-circuit or anything else? I hope someone can help me with this problem. Dont have the money to buy a new one atm

You replaced it yourself? Don't know where you get the "10 hours" from as a first gen mini can have a battery playback time of up to 8 hours and the second gen mini up to 18 hours.
Difficult to know what to tell you. Bad battery? Not installed correctly? Who knows?
Have a read of these.
Beef up my iPod battery.
iPod Battery Unplugged.
iPod Battery FAQ.
iPod Battery Tips and Tricks.

Ctrl-# space switching stops working, only comes back with restart

Ctrl-# (used to switch spaces) will randomly stop working for me in Mavericks. Turning it off and back on in the control panel does not bring it back, only restarting will. Any ideas why this might be?

Ctrl-# (used to switch spaces) will randomly stop working for me in Mavericks. Turning it off and back on in the control panel does not bring it back, only restarting will. Any ideas why this might be?

I am traveling to Italy from U.S. and bought American Tourister Worldwide Adaptor Plug for my iPhone 5 andiPad 2. The instructions saying is not for use with grounded plugs and can only be connected with non-grounding circuits. Will this adaptor work?

I am traveling to Italy and bought an American Tourister Worldwide Adaptor a plug for my iPhone 5 and iPad 2. The instructions say it is not for grounding use and not for use with grounded plugs. Will this work?

That adaptor should work.

Can't print on new epson R3000 printer from PE 11 on Mac running 10.10.1. Spent hour with Epson tech support. worked fine last week with Epson R2880 and same OS.

All drivers were updated. Printing works fine with other software.

Still not printing.
In the meantime have done the following: --
1. Launched terminal, typed sudo chmod a+x /usr/libexec/cups/backend/*, followed with pw when prompted, then quit terminal.
Tested printer: no go. Printer setting shows "In use, last used". Printer dialog says "waiting for printer to become available".
2. Launched terminal, typed ls -l /usr/libexec/cups/backend.
This is the list:
total 2992
lrwxr-xr-x 1 root admin       69 Jan 2 2013 HP-Fax -> /Library/Printers/hp/Fax/HPFaxBackend.app/Contents/MacOS/HPFaxBackend
-rwxr-xr-x 1 root wheel   122384 Jun 8 2011 bluetooth
lrwxr-xr-x 1 root wheel      109 Jan 2 2013 canonijnetwork -> ../../../../Library/Printers/Canon/BJPrinter/Plugins/BJNP/canonijnetwork.bundle /Contents/MacOS/canonijnetwork
-rwx--x--x 1 root wheel    57344 Jul 13 2011 dnssd
-rwxr-xr-x 1 root wheel    63296 Jun 12 19:47 epsonfirewire
lrwxr-xr-x 1 root wheel       68 Jan 2 2013 fax -> ../../../../System/Library/Printers/Libraries/Fax/Contents/MacOS/Fax
lrwxr-xr-x 1 root wheel        3 Jan 2 2013 http -> ipp
-rwx--x--x 1 root wheel   106096 Jul 13 2011 ipp
-rwx--x--x 1 root wheel    93024 Jul 13 2011 lpd
lrwxr-xr-x 1 root wheel        5 Jan 2 2013 mdns -> dnssd
-rwxr-xr-x 1 root wheel    73812 May 6 2008 pdf800
-rwxr-xr-x 1 root wheel    61008 Oct 26 2010 riousbprint
-r-x--x--x 1 root wheel 2796752 Apr 13 2012 smb
-r-xr-xr-x 1 root wheel    66576 Jul 13 2011 snmp
-r-xr-xr-x 1 root wheel    79328 Jul 13 2011 socket
-r-xr-xr-x 1 root wheel    91792 Jul 13 2011 usb
3. Reset printing system.
Tested printer: no go.
In the meantime, the iMac is printing to HP Laserjet 6MP (appletalk connected to iMac's USB).

Can I work use videos made with 24fps for the IMovie App?

Hallo,
I was making a video with my iphone 4s and the App Filmic Pro. I choiced 24fps. Can I use this film for I Movie or only films on 30fps?

In IBooks Author choose Share:Export... iBook. Drag the YourBook.ibooks file onto iTunes, maybe directly into the Books panel. Sync your iPad with the Mac, selecting YourBook in iTunes.

How does texting with a non iPhone work on the mcbp with the new software?

With OS X Yosemite and if you have an iPhone that is using iOS 8 your are suppose to be able to send and receive SMS text messages right from the mac. This is suppose to be working regardless of what phone they are using ... has anybody figured out how to make that work?

It will work on iOS 8.1
Connect your iPhone, iPad, iPod touch, and Mac using Continuity

Problem with JavaMail: don't work after I made it a jar

Hi, My program works fine if I use -classpath to mail.jar and activation.jar but when I jar it i get:
javax.mail.SendFailedException: Sending failed;
nested exception is:
class javax.mail.MessagingException: IOException while sending message;
nested exception is:
javax.activation.UnsupportedDataTypeException: no object DCH for MIME type text/plain; charset=us-ascii
at javax.mail.Transport.send0(Transport.java:218)
at javax.mail.Transport.send(Transport.java:80)
please help

What did you jar?
The archives JavaMail consists of might contain some non-class extra information.
unzip -l /mnt/ntfs/LANGS/java/extjars/mail.jar |grep -v class
Archive: /mnt/ntfs/LANGS/java/extjars/mail.jar
Length     Date   Time    Name
    26991 05-21-99 13:31   META-INF/MANIFEST.MF
        0 05-21-99 13:31   META-INF/
      286 05-21-99 13:31   META-INF/javamail.default.providers
       12 05-21-99 13:31   META-INF/javamail.default.address.map
     1107 05-21-99 13:31   META-INF/javamail.charset.map
      335 05-21-99 13:31   META-INF/mailcap

How to carbon copy an old hard disk with mountain lion on MBP-retina's SSD

Well the title says it all.
My idea is: Thunderbolt externally my old HDD and boot from it with target disk mode. Here's the first question: shall I first boot normally to initialize the OSX on the new MBPR or it doesn't matter since I am going to overwrite the whole SSD later?
So yeah, let's say i booted using thunderbolt on with my externalized old HDD. Can I use Carbon copy cloner to copy everything exactly to the MBP-retina's SSD?
Are there any risks in this procedure?
Is it possible even?
Any better and/or tested strategy to do the same thing?
There must be a better way to transfer not only your user files and apps (see migration assistant), but also all drivers, system mods, 3rd-party system preference panes, etc.
Thanks

This is the closest thing to my query that I have been able to find. I recently installed ML on my late 2011 MBP. I have tons of backups from Lion and I want to continue backing up ML. I have hesitated to do so as I fear that I will not be able to recover my data and settings in the event that I decide to downgrade to Lion. If I was to downgrade back doe Lion; could I use a ML TM backup to recover my files and settings?

Audigy 2 ZS+Sounds works only if mediaplayer has played some video and you leave mediaplayer

sounds work only in movies with mediaplayer..i have installed ffdshow what pops up when i start videos..if i try to play winamp only, music plays only -2 second and stops but with mediaplayer on backround it will play mp3..
in mediaplayer sounddevice is audigy 2 but winamp directsound output is working only with primary sound device, if i change it to audigy 2 then the music stops
also tryed dxdiag and there sound page..it plays directsound test only if mediaplayer is on..without mediaplayer nothing but at music page it plays that test without mediaplayer on in backround
Even reinstalling WIN XP didn't help..same thing with audigy 2 cd full installion
Can anyone HELP me..And sorry about my bad english
Motherboard is DFI Ultra-D

My guess is that your PowerDVD and WinDVD versions don't have ES support and you're using the programs to decode. This might be the case if you are configuring the programs for multiple speakers. If you are, try configuring them for SPDIF output, then make sure the soundcard is configured to decode AC3/DTS (it probably is). Does that help?
-Dave
[email protected]

No sound - apart from with headphones (when it works as normal)

Needing help - iphone 3gs has suddenly stopped sounds unless the headphones are attached.
Also all ringtones are no longer showing up on phone but are classed as being synced across from itunes.
I've tried cleaning, using a vaccum, turning on/off, resetting on phone, restoring via itunes, putting jack in/out repeatedly - all to no avail.
Feeling all that is left is treatment with a ball pein hammer.
Any suggestions on solving this would be gratefully received,
kind regards to all & thanks for your eyes n time.

I have the same issue. Phone rings with calls and alarm works but no sounds with tweets, messages...etc
Tried sleep-wake with Home button reset.. Tried full restore from back up. Mute slider makes no difference.
When in settings/ sounds and I try to select alert sounds I can feel the Vibrate with each selection but no sounds.
Any ideas?

While uploading my Pages App, it stuck and I can't get to my documents. I work in Rwanda, Africa with bad internet connection

While uploading the pages App fot up dating, it stuck and now I am unable to work with my documents
I work in Rwanda, Africa with very poor internet connections.

have you tried to completely shut down the ipad, restart and try the update again?
Jason

How to fix faux subscripts/superscripts made with baseline shifts

Hello all.
There is a script on the forums used to convert locally formatted styles to character styles – Preserve Local Formatting script and CS4
It is a brilliant script, but as I have unexpectedly found out (and would have found out if I read the post in more detail) is that any "faked" sub/superscripts created with baseline shifts won't work. To quote the other thread:
The script searches for attributes such as "superscript", "subscript", "small capitals". If small caps are faked in the document with capitals in a smaller font, the script will not find them. If superscript or subscript are faked in the document with a smaller font size and some baseline shift, the script will not find them.
Initially I didn't think this would ever be a problem... I thought "who the hell would make a subscript or superscript like that? wouldn't they just click the subscript or superscript buttons?"... unfortunately, no!
I thought a solution would be to make a GREP that could be added to a findchangebylist script that ships with InDesign. First thing to do would be to create a GREP to look for any positive baseline shift and change it to superscript; and a GREP to search for any negative baseline shift and change it to a subscript. Sounds simple... until I tried to implement it, as the dialog won't take a + or - by itself... it has to be a proper value.
Has anyone else faced this issue, and if so, what was the solution/outcome?
Colin

@Rob: Perhaps I should have given some background for what I was trying to do.
I have a client who is importing dozens of pages of simple chemical equations from microsoft word and it is in the word file that the baseline shift method of creating subs/supers was done. What my client wanted to do was import the text without losing important appearance details such as this, and bolds/italics, but then be able to assign his own paragraph styles without faux sub/supers returning to a regular style. My procedure to the client was to:
Import said word file into indesign file that contains appropriate paragraph/character styles to be applied;
Run the default "findchangebylist.jsx" to remove any double spaces, tabs etc.
Run a modification of Jongware's "preptext" script that will apply to all text frames rather than the current text frame.
This was working well until we both noticed H2SO4 did not have the numbers as subs, even though the word file clearly did. Closer inspection on the word file showed that the subscript button was not toggled, but the baseline shift had been, hence why the preptext script had missed a key piece of formatting.
With the preptext script, items that had subscript and superscript locally applied to the text would now be assigned "Sub" and "Super" character styles, and from there I agree - the more discerning typesetter could to into the character style and make the apperance of the said subs/supers more appealing. I believe a way of using the opentype subs/supers would be to replace the words SUBSCRIPT and SUPERSCRIPT in the said script to be OT_SUBSCRIPT or OT_SUPERSCRIPT respectively, provided an opentype font was being used for the formatting.
So in this instance, this script serves a rather specific purpose of fixing this particular document, rather than being applicable on a wider scale.
It is also important for anyone working with epubs to note that subs/supers made with baseline shifts (whether applied as character styles or not) will not appear in the resulting epub. Subs/supers made with the subscript/superscript buttons (again, whether applied as a character style or not) will appear in a resulting epub, so this is another consideration (I don't know if this is true if a customised CSS has been applied, but for straight export to epub from InDesign, it appears to be the case). This can be said for other forms of faux styles, such as skewing type to make a faux italic.
@Peter: I agree, there isn't a perfect solution, but for the situation that I have, the script does what it is intended to do.
It should be noted for readers of this post that this script is specifically purpose-driven, and that I would not use this script if a document contained:
fractions made using baseline shifts;
character or paragraph formatting that used baseline shifts;

Sparse disk, with elastic dinamic capacity, works only if made with carbon copy

Similar Messages

Maybe you are looking for