Spartan-6 supported BPI devices for actual Memories

We plan to start a new Design with Spartan-6 (XC6SLX45T-3FGG484).
The BPI Flash on the SP605 Evaluation Kit is Obsolete.
The list of supported BPI devices in ISE11 Suite is old.
Is there a newer list of supported BPI devices for Spartan-6?
Is the Micron M29W256GL supported?

Hello,
You need to follow below link to get the list of supported flashes with Spartan-6 devices.
http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_7/pim_r_supported_spi_bpi_proms.htm

Similar Messages

[ANE] Repacking for simulator and fake support of device

Hello,
I have a question about anes, here is my problem : Some of the anes I use don't have simulator support or all-device support (only android, only iOS,...)
In my code, I of course test the device before calling anything so its fine from a runtime point of view (never had a runtime issue).
But, it does refuse to compile/launch. I know I could use multiple projects, compiler constants for imports, blablabla, but the best way to increase productivity would be to have them support all-device and simulator even if they do nothing with it.
So what I tried :
- rename ane as zip
- edit extensions.xml, add proper stuff
- rezip and rename back, and of course, don't call anything in the ane if you know your support is just "fake" for that device
It works for simulator BUT if I use the rezipped ane in a iOS build (which was supported), it refuses to build a release. So I have to switch ane back and forth.
It doesn't work if trying to add iOS support (well it compiles but when installing on device, install never ends). I tried adding a fake library.swf for iOS with only empty functions but didn't work.
Haven't encountered the case where I need to add new Android support so I can't say for that one.
Anyone knows of a quick way (which doesn't involve recreating all the concerned anes, since I don't have source code for them) ? Would create a huge productivity boost here.
I hope question is clear enough.

Understand that I'm not going to tell you that what you want is wrong. There's nothing wrong with wanting Flash on a tablet. The only problem is that the future of Flash no longer exists for tablets.
fredfromewa wrote:
So, does anyone know if real Java and Flash support is indeed coming in the future or am I going to have to either return or sell these IPADS and go switch a competitor...
You can go to a competitor, but it won't help you in the long run since Adobe Flash on mobile is dead, and by the hand of Adobe themselves, not Apple. Here's the official announcement from 2 months ago:
Adobe Abandons Mobile Flash, Backs HTML5
You do have one alternative left: Buy a Windows-based tablet now. Why now? Because in mobile versions of Windows 8, Microsoft will no longer allow plug-ins like Flash:
Microsoft Follows Apple, Bans Flash From Windows 8 Tablet Software
In fact, even Microsoft's own Flash competitor, Silverlight, will not be allowed to run in tablet versions of Windows 8, only in desktop Windows.
In the end, your last alternative will be to buy a Windows-based tablet that, ironically, does not run the tablet version of Windows, and then never upgrade it to Windows 8 mobile. You will probably be able to be run Flash then. But since the tablet will run desktop Windows, have fun with 30 minutes of battery life, maybe less after you boot Flash...
fredfromewa wrote:
....they could easily have a much larger majority of the market with tablets by supporting Java and Flash.
Uh...all the way up to now, the iPad practically has the entire tablet market to itself. How is it possible that Flash would have made that significantly larger?
Seen from a different perspective...how is it that all the tablets that support Flash have completely failed to make a dent in the tablet market?
Neither angle seems to support what you're saying.

Can Web Dynpro for ABAP supports Mobile devices as like web dynpro for java

HI,
Experts,
Web dynpro for abap application supports mobile devices as like web dynpro java application supports the mobile devices.
Thnaks
shabeer ahmed.

Hi Shabeer,
if you are looking for Mobile Web Dynpro, this is only supported with Java: [Mobile Web Dynpro |http://help.sap.com/saphelp_nw04/helpdata/en/7d/28fa3e7cb1d861e10000000a114084/frameset.htm]
If you are on NW 7.0, check out this documentation:
[Mobile Web Dynpro Online|http://help.sap.com/saphelp_nw70/helpdata/en/42/c136cb0f241d66e10000000a1553f6/frameset.htm]
Kind regards
Stefanie

Is Sony Handycam HDR-SR10 a supported device for Premiere Elements 10?

Is the Sony Handycam HDR-SR10 a supported device for Premiere Elements 10?

happyherbert
I cannot give any guarantee as to whether you can make a USB connection between camcorder and computer/Premiere Elements 10 Get Media/"Flip, AVCHD, Cameras, Phones or Removal Drive"/Video Importer but it might work.
But worst case, which is not so bad, is transferring the AVCHD files to the computer hard drive and then importing the files into a Premiere Elements 10 project with the program's Get Media/Files and Folders.
If you have Full 1080i30, then the project preset that you would set before you import the files would be
NTSC
AVCHD
Full HD 1080i30
We can discuss more about settings when you have more details.
You are at a disadvantage with Premiere Elements 10 on Windows Vista (32 or 64 bit). In that arrangement, Premiere Elements 10 is a 32 bit application with the limitations of 32 bit system. AVCHD is a rather resource demanding format. If Premiere Elements 10 were on specifically Windows 7, 8, or 8.1 64 bit, then it would be a 64 bit application that could take advantage of the 64 bit resources. All that would translate into getting a larger project taken to successful completion with a greater frequency.
Please review and then we can go further into the details and then decide what next.
Thanks.
ATR

I've had my iphone 5s since march 2014 and I've been using the same charger it came with. for the last two weeks ive been getting a message saying the accessory may not support the device. how is that possible?

How come I keep getting a message saying that the accessory may not support the device? I've been using the same charger that came in the box with the phone. Now it doesn't charge at all.

Then take the cable, the plug and your iPhone to an Apple Store genius bar it is still under the 12 month warranty

How can I use my computer as a Headset device for my phone with Bluetooth?

Hello, Both my laptop and my phone support A2DP but for some reason the service (from the phone) does not show up while I add a new connection and the phone does not let me initiate a connection with any other profile except FTP, even though it detects other services in the service list like A2DP and works perfectly fine with other profiles like DUN, HID, OPP, SSP if the connection is started through the computer. I am currently using the latest version of the Toshiba stack [v8.00.12(T)], I have tried using WIDCOMM but it refuses to install drivers for both the internal Bluetooth and the USB Bluetooth that I use on my desktop. The standard Microsoft stack (generic driver) does install but it does not seem to communicate with my internal and external (USB) Bluetooth. With BlueSoleil (the default stack that came with the USB Bluetooth) I could set my device as "headset" instead of only "laptop/desktop", and this allowed both my phones to detect my laptop as a device they can use as a headset, but the problem with this stack was that only the older phone could actually connect to my laptop and that the internal Bluetooth could not be used. Basically, I want to set the device type as a "headset" for my phone using the Toshiba stack like I did with BlueSoleil. Is there any way this could be done? Thanks. Attached: Device type selection
Attachments:
Untitled.jpg ‏120 KB

It's not possible. You can use the iMac as a display for the MBP, but the reverse is not possible. The MBP does not have Target Display Mode as a feature and no third-party app nor hack can enable something that doesn't exist. The only way to accomplish this will be one of the network solutions.
Regards.

Console Launcher No support Audio Device Available

Note: Creative SB X-fi is detected (without a yellow mark) in my device manger. My card is an X-fi Titanium Fatalty Professional.
The easiest way I can put this is by explaining the mistake I made. Without installing the card, I moved it from one PCI-e slot to another, the one below it. This caused a small annoying issue that I decided to fix by totally uninstalling the card (correctly I hope) and putting it back in it's original slot. After reinstalling it via the disk it came with, when the computer restarts afterwards I am told that no supported hardware is detected and most of what seems to have installed correctly doesn't even show in my programs.
I have tried uninstalling and driver sweeper for HOURS straight over and over and so far nothing is working. Has anyone had a similar issue or know what the problem is? I've already made sure I'm using the same settings I originally used before moving slots but no dice.
P.S. During SOME of the updates or even installations, I? occasionally receive the error I-00 (usually during Alchemy or Creative Control Console installations or Updates) and I am told the installation can't continue. It does though, simply bypassing these things/
I am using Windows 7 64bit

Update: I'm facing a new issue now during installation! -EVERY- time the install wizard finishes and I restart the computer, I see the volume panel icon on the task bar and Creative SB X-fi when I hover over it. However, when I double click to open the console launcher (Which installed correctly to my knowledge) I'm told no supported audio device is available.
Did I break my card or something after what I did earlier? Or is my disk screwed up now too? I'd really rather not use the motherboard's crappy audio, I can actually tell that the audio quality is lower.

[Motherboard] MSI Motherboard supported NVMe device. 3X Faster

[Motherboard] MSI Motherboard supported NVMe device. Comes Testing of X99S GAMING 7 and Intel P3700
Here is third party news, please check PVEVA review as below
------------------------resource：http://bbs.pceva.com.cn/thread-113902-1-1.html------
I heard that MSI has updated BOIS recently. From now on, all the 9 Series motherboards support NVMe device. As a result, I borrowed a NVMe SSD Intel DC P3700 400GB from MSI and tested it
Intel DC P3700 have equipped with PCIe 3.0 x4 slot，capacity from 400GB to 2TB，what I borrowed is 400GB version just looks like normal PCIe SSD.
Why the SSD uses PCIe?
SATA 6Gb/s is fulfilled with traditional Hard Disk, but the speed is far from the SSD. With the PCIe, it helps to increase and extend the connection function. And help to improve the performance.。
AHCI compare to NVMe
While Advanced Host Controller Interface (AHCI) interface has the benefit of legacy software compatibility, it does not deliver optimal performance when a SSD is connected via PCI Express bus. NVMe has been designed from the ground up, capitalizing on the low latency and parallelism of PCI Express SSDs, and fulfilling the parallelism of contemporary CPUs, platforms and applications. NVMe brings various performance improvements is the reason why it was burned
The NVM Express, Inc. is directed by a thirteen-member board of directors selected by the promoter group, which includes Avago Technologies, Cisco, Dell, EMC, Intel, NetApp, Oracle etc. and develop by around eighty companies.
NVM Express, NVMe, or Non-Volatile Memory Host Controller Interface Specification (NVMHCI), is a specification for accessing solid-state drives (SSDs) attached through the PCI Express (PCIe) bus.
The biggest advantage of NVMe is the lowest latency. Because of streamlined storage stack method, NVMe can command without registers. However, each command of AHCI needs four unbuffered registers and it will cause 2.5 μs data latency.
The other important revolution of NVMe is supporting more queues and this technology can enhance Muti-Core of CPU’s performance; the IOPS will not be influenced by single-core of CPU.
Enterprise market will be huge benefits from NVMe. NVMe technology could reduce the HD loading and extend the battery life indirectly.
In conclusion, PCIe hardware interface brings a high-bandwidth (sustained R/W performance), thank for native PCIe controller, it reduces latency controller (R/W performance under low QD upgrade, if it is directly connected to the CPU PCIe lanes , the performance is more obvious when the CPU overclocked). Also, NVMe software interface software is reduced latency of software.(random R/W performance of multi-core CPU under high QD)
Let’s comes to the actual testing. To avoid decrease the Link Speed of graphic card, we put P3700 at second PCIe slot.X99S Gaming 7 supported the NVMe from the BIOS version 17.6 last year.
Test basic：
CPU：Intel Core i7-5960X
Motherboard：MSI X99S GAMING 7
Memory：Avexir DDR4-2400 4GBx4
Graphics card：MSI GTX 660 TwinFrozr
HD：
Plextor PX-128M2P（system）
Intel DC P3700 400GB（Test 1）
Plextor PX-G512M6e（Test 2）
Power supply：SilverStone SX-600G
Cooler：Noctua NH-D14
OS：Windows 8.1 Update 3
The driver from intel official website is much more compatibility than the NVMe driver original from Win 8.1.
Download link : https://downloadcenter.intel.com ... =3810&DwnldID=23929
During the testing, we need to do security eraser several times, therefore; we need to download the Intel Data Center.
Download link : https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23931
Device manager of P3700 NVMe device in Windows 8.1
SMART information should be checked from Intel Data Center. CrystalDiskInfo can’t read
Wear Leveling:
The following is benchmark test. ASSSD Benchmark and CrystalDiskMark software cannot push SSD performance to extreme level, so we use TxBench to test the performance of 32GB data transmission. TxBench in Win8.1 with native driver, sequential read is up to 1375MB/s and write is 1072MB/s. In 4K single QD test, there is not big difference between SATA3.0 and PCIe. In other side, the performance of 4K QD32 test, SATA3.0 is 50% better than PCIe.
After installing NVMe driver, the performance of sequential R/W is dramatically improvement. Especially in read function, the performance is directly double to 2800MB/s, achieving the highest level we never saw. It’s the real performance of this SSD.
As I mentioned before, native PCIe controller could decrease the latency of SDD. The R/W performance increase after CPU overclock to 4G as well.
Compare to PCIE 2.0 x2 AHCI by Plextor PX-G512M6e
overall review：
Conclusion:
I just introduce the overview of VVMe technology and the Intel P7300 basic performance. We found out that the advantages of NVMe comparing to the AHCI, it will be more and more common in the future.
MSI 9 series motherboards supported NVMe device. Although NVMe is not popular, MSI keep the scalability of the motherboards. In the next article, we will test P3700 under business environment to see the performance and advantage.

Quote from: MSI-MKT on 17-March-15, 14:10:11
[Motherboard] MSI Motherboard supported NVMe device. Comes Testing of X99S GAMING 7 and Intel P3700
Here is third party news, please check PVEVA review as below
------------------------resource：
It's PCEVA. got a typo lol.
anyway it's a nice article from China media. thanks for the translation.

SimpleSave MD1000H - bad support, bad device

Sorry to all reading this, I'm usually quite reserved.
My experience with HP support and this device (SimpleSave md1000h) has been more than frustrating.
I've upgraded to Win 7 64 bit and the device doesn't show up for at least 3 minutes, and when it does, the backup/restore is non-functional.
I can sometimes see the files and folders on the backup partition, but cannot copy, move, run - anything
I've had this device plugged into 7 different machines - OS's ranging from WinXP home, Pro, 7 (32) and 7 (64) - oh yeah, and even Mac OSX (I was desperate)
It has only worked on one machine thus far since - an Asus machine running Win 7 32 bit. Oddly, I have another exact computer - bought the same day - runnign Win 64 bit - SimpleSave doesn't work on it.
I don't know what the issue is with this product - there are many posts and I see no real solution offered by HP
I did call HP support - the response was "Take it back to where you purchased it and they will deal with it"
The retailer will not fix - wil only offer to replace - not so good if you have anything backed up on it.
I'm furious with the lack of effort made by HP in this case, and the "English as a third language" support one gets when calling their support line.
To reiterate - bad pruduct, bad support - bad job all around HP

It's worse than that here. My drive's just failed - at which point I discover that support comes from the USA even though I bought it in here in the UK. I have to pay international to call the states, and just found out that it's only open USA hours. So that's a wasted call to add to the frustration of loosing all the data on it. What's worse is that I have another one of these I haven't even opened the box on yet.
Why is HP selling this overseas if they don't properly support them. You can't use webchat to talk to a technician because you can't verify your warranty because HP's website won't accept SimpleSave's Serial No or Part No as they are the wrong format for HP's own website!
I get the sense that HP bought these drives in from somewhere and is flogging them without any intention of actually supporting them. They certainly don't see them as actually belonging to HP. You can only get the contact number for SimpleSave support by ringing HP (premium line) to be told "we don't support them, ring 0080063666666" - no indication that that's an international call, or that it's only manned during EST working hours.
What's the betting that when I get up at the crack of dawn tomorrow and ring them they'll try and duck out of their warranty?
So seconded - bad support, bad device.

I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? Create a personal cloud?

I want to use my Time Capsule as a central 'hub/hard-drive' in order to keep all my working files in one place. I then plan to use my laptops/desktops as peripheral devices for editing and creation of these files. Is it possible? To create a personal cloud?
Can someone advise as to whether i can do the following:
                            Future Internet connection -------------------TIME CAPSULE (containing all files) -------------- Backed up on the WD 2T Hard-drive I have
                                  (not connected yet)                                         I                                                          (*connected to timecapsule physically)
                                                                                                        I
                I                                         I                                                I                                                              I                                                I
      Macbook Pro                             iMac                                       HP (PC)                                             OLD Macbook Pro                         iPhone
(used for remote working)       (Used for home working)     (used for heavy CAD and rendering)    (not being used for anything at the moment)        (& iPods)
I am looking to have all my files in one place as i am hopelessly disorganised. I know the online clouds are a good solution (used Dropbox at work and uni for 3 years) however i am wanting to create my own 'dropbox/icloud' at home. So whenever i get back home with my laptop, any work i have been working on whilst out that day is updated to the timecapsule, and then ultimately as i turn on the other devices, they update to those newer versions of the files. Please tell me that the 3TB time capsule i have can do this, otherwise it feels rather overpriced as a wireless storage device?
Another note (to those in the know) If i am to be working on large files (REVIT/SOLIDWORKS/KEYSHOT/CREO/AUTOCAD) - is the timecapsule connection good enough to support editing and updating these files?
I know i may be asking a question that many have before, but as a bit of a technical novice I wanted a clear-cut answer to my specific circumstances. Your help is greatly appreciated.
(*can i use this WD hard-drive that is connected to the Time Capsule as a back up? so that the time machine back-ups/any back ups are also backed up onto this one? can the WD be a backup for the TC?)
Kind Regards
Joe

The diagram was supposed to look more like this......
Internet ---------TIME CAPSULE(containing all files) --------WD 2T Harddrive
                                            I
     I                           I                          I                            I                                   I
Macbook Pro         iMac                 HP (PC)            OLD Macbook Pro           iPhone
Sorry!
Regards
Joe

I would appreciate it if someone could advise me as to the optimum resolution, dimensions and dpi for actual photographic slides that I am scanning for use in a Keynote Presentation, that will be projected in a large auditorium. I realize that most proje

I would appreciate it if someone could advise me as to the optimum resolution, dimensions and dpi for actual photographic slides that I am scanning for use in a Keynote Presentation, that will be projected in a large auditorium. I realize that most projectors in auditoriums that I will be using have 1024 x 1200 pixels, and possibly 1600 x 1200. There is no reference to this issue in the Keynote Tutorial supplied by Apple, and I have never found a definitive answer to this issue online (although there may be one).
Here’s my question: When scanning my photographic slides, what setting, from 72 dpi to 300 dpi, would result in the best image quality and use up the most efficient amount of space?
Here’s what two different photo slide scanning service suppliers have told me:
Supplier No. 1 tells me that they can scan slides to a size of 1544 x 1024 pixels, at 72 dpi, which will be 763 KB, and they refer to this as low resolution (a JPEG). However, I noticed when I looked at these scanned slides, the size of the slides varied, with a maximum of 1.8 MB. This supplier says that the dpi doesn’t matter when it comes to the quality of the final digital image, that it is the dimensions that matter. They say that if they scanned a slide to a higher resolution (2048 x 3072), they would still scan it at 72 dpi.
Supplier No. 2: They tell me that in order to have a high quality image made from a photographic slide (starting with a 35 mm slide, in all cases), I need to have a “1280 pixel dimension slide, a JPEG, at 300 dpi, that is 8 MB per image.” However, this supplier also offers, on its list of services, a “Standard Resolution JPEG (4MB file/image – 3088 x 2048), as well as a “High Resolution JPEG (8 MB file/image – 3088x2048).
I will be presenting my Keynotes with my MacBook Pro, and will not have a chance to try out the presentations in advance, since the lecture location is far from my home, so that is not an option.
I do not want to use up more memory than necessary on my laptop. I also want to have the best quality image.
One more question: When scanning images myself, on my own scanner, for my Keynote presentations, would I be better off scanning them as JPEGs or TIFFs? I have been told that a TIFF is better because it is less compressed.
Any enlightenment on this subject would be appreciated.
Thank you.

When it comes to Keynote, I try and start with a presentation that's 1680 x 1050 preset or something in that range. Most projectors that you'll get at a conference won't project much higher than that and if they run at a lower resolution, it's better to have the device downsize your Keynote. Anything is better than having the projector try and upsize your presentation... you work hard to make it look good, and it's mangled by some tired Epson projector.
As far as slides go, scan them in at 150 dpi or better, and make them at least the dimensions of your presentation. Keynote is really only wanting 72dpi, but I do them at 150, just in case I need to print out the presentation as a handout later, and having the pix at 150 dpi gives me a little help with their quality on a printer.
You'd probably have to drop in the 150 versions again if you output the Keynote to .pdf or Word or something, but at least you have the option.
And Gary's right (above) go ahead and scan them as TIFFs. Sooner or later you'll want to do something else with these slides (like make something for an iPad or the like) and having them as TIFFs keeps your presentation looking good.
Finally, and this is a big one, get to the location for your presentation ahead of time if you can, and plug the laptop in and see what you get. There's always connection problems. Don't let the AV bonehead tell you everything will work just fine ('... I don't have any adapters for a Mac...') . See it for yourself... you're the one that's standing up there. Unless it's your boss, then you better be really sure it works.

I have multiple computers and iPhones and now iTunes will not allow my wife to load applications or use her own iTunes playlists. How can I setup each device for each user correctly?

We have multiple computers and iPhone devices which I have passed on to other family members, such as my wife. Now she is not able to load apps to her devices, eventhough it appear she is logged into her own iTunes account. How can I setup iTunes correctly on each device? Currently, there is one PC and one Mac laptop and we each have iPhones, with one other family member not able to use his 'passed-down' device for iTunes, also.

Hello dal1820
Check out the article below on how to use multiple devices with one computer. The main idea that I want to point out is to have different users for each person as it is the easy way to make sure that no issue happen when syncing.
How to use multiple iPhone, iPad, or iPod devices with one computer
http://support.apple.com/kb/ht1495
Regards,
-Norm G.

Can I use a MIDI keyboard as an input device for a software instrument?

I have a Casio CTK-2100 that I am currently playing around with in Logic Pro 9. It can record and playback the different instruments fine using MIDI tracks. But I was wondering if it is possible to use the keyboard as an input device for a software instrument instead of the "Step Input Keyboard".
Is it? If so, how do I set it up?

Yes, the terminology can be a bear, many, many years ago when I started using Logic the manuals were written completely by the programmers, while they were quite humorous in places the were also really hard to understand so I learned/realized.. you can't really do anything so wrong it's going to destroy your computer so why not go ahead and experiment. I learned the basics of Logic without a manual, months later when I went back to find some some details I could figure out the manual made a lot more sense.
Logic has been somewhat Appleized but it's not really an Apple program, it was purchased almost as developed as it is now... a lot of the additions a fluff to make it easier to understand for new users while at the same time there are some real improvements.
This is personal opinion: With all of the forums/online tutorials...etc...etc. It seems users are learning (but not understanding) the same things, plus everyone wants to use it right away so nobody takes a deep breath and investigates on their own. Logic is a deep, deep program, while learning don't be afraid to go off on a tangent and explore the program without any other input, it can actually be inspirational. One other thing good about the manual or "Online Help", in looking up a function you will invariably come across a related concept that will provide further insight.
And..... have fun.

Could not find supported audio device in AA3

okay so i know its not a good idea to use AA3 with Vista...but other people are doing it so why can't I? I've seen the topic posted before but the threads are pretty much dead and I still have no helpful info. I've scoured this thing with no affective solution. I've installed AA3 on several systems in the past and never had this much trouble--if any. This problem has gone on for over 2 months now!
Since I installed AA3 on my new computer all i can get and all i have ever gotten is the "AA could not find a supported audio device. Please check device settings" dialog--
press okay (or x) and Audition closes---never getting past the loading window --during "initalizing required components"
I have 3 audio devices/ with up to date drivers which all my other audio programs recognize (Audition 1.5, Sonor, Cubase + more) with no problem whatsoever--
AA3
Windows Vista SP1 64 bit
Realtek HD Audio
+ Presonus FP10 digital firewire interface/preamp (kind of unrelated but aa3 still wont recognize it either apparently)
I have installed all updates including the 64-bit SP1 fix for AA3.
I've read the Realtek HD issue solutions and made sure my drivers are fine.
IM DESPERATE----PLEASE!!!
I'm having a recording studio built right now & AA3 is my main DAW so this is rather dire.---All the other DAW's i've tried suck compared to AA3 (with the exception of stability). hehe AA3 is always crashing on me and yet i still prefer it over other DAW's.

I put the PreSonus StudiLive 16.4.2 plus Adobe Audition 3 setup instructions into a short write-up on my blog: Live Event Multitrack Audio Capture
Here is a photo showing how to set up the Firewire channels for input and output
I hope this helps:
Ron Fredericks
LectureMaker, LLC

TS3694 Ipad won't turn on at all, and is recognized by itunes as being in recovery mode- when I try to restore it stalls on the portion stating "preparing device for restore" and on the page it says "itunes is restoring the software." Been like this for a

Ipad 4 won't turn on at all, and is recognized by itunes as being in recovery mode- when I try to restore it stalls on the portion stating "preparing device for restore" and on the page it says "itunes is restoring the software." Been like this for a day. I read the restore notes on apple, but this seems to be a little more unique than the standard recovery issues. Any ideas as to why I seem to keep stalling during the restore process?

Couple of things I can think of before going to the Apple store.
First, if you can, power off the iPad. Then connect it to the charger that came with the iPad and plug that into a known good wall outlet. Leave it there at least an hour then try to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
Also, you mentioned you have the latest iTunes. But it would be good to check the actual version. If the iPad is running iOS 7 you need iTunes 11.1 or later.

Spartan-6 supported BPI devices for actual Memories

Similar Messages

Maybe you are looking for