SPAU issues with: Without Modification Assistant: No versions found

Hi,
We have upgraded from SAP 4.7 to SAP ECC 6 with Unicode.
After the upgradation we have started working with SPAU objects.
Currently I am working on SPAU: Without Modification Assistant.
I have gone though some docs in those they have asked to compare the versions using Version Management options.
But when I am tiring to check the Version Management for many of the objects I am getting the message: No versions found
Some of the objects are for which I am getting the message No versions found are as follows :
Selection Views : SAPBRFSTANDARD 100789 23.12.2010 ABCK900506
Programs :RM06BF00 Collective Release of Purchase Requisitions
Transactions FEBA A_1234 13.07.2006 XYZK906487 Postprocess Electronic Bank Statmt
Transaction Variants O4_TIGER1 D_ABCD 18.06.2005 AB5K901250
Screen Variants O4_TIGER1_0999 D_ABC 18.06.2005 AB5K901250
Message Classes 38 General Basis: ABAP Runtime Environment
Maintenance and Transport Objects J_1IEWT_ACKNS D_ABCDE 27.06.2008 ABC3910542
Request you to check and let us know how to proceed.
Thanks and Regards,
Prem.
<personal information removed by moderator>
Edited by: Thomas Zloch on Jan 18, 2011 12:43 PM

Hi,
in SPAU you will be getting three things..
1>Green light 2>yellow light and 3>Red light
when the upgrade takes place if you see any object under Green that means the changes are automatically carried to the new version from older version
for yellow it has done partially and for red you need to do manually copying the code to the new version.
You have an option is "RESET to original" if you do this , the code will be reset to what SAP provided in the new version. Your old code won't be there.
Please go through the below link to understand about SPAU and SPDD.
http://help.sap.com/saphelp_nw04s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
Regards,
Nagaraj

Similar Messages

Adjustment using SPAU for Objects Without Modification Assistant

Hi
How to adjust Objects under Without Modification Assistant.
For example if there is an issue with custom program or BAPI, do I have to manually edit them and adjust to old version.
Cheers
Senthil

Hi,
Tcode SPAU is for adjusting programs and Function Modules.
http://help.sap.com/saphelp_nw04/helpdata/en/2e/6d66617d9011d396b60000e82de14a/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/60/d6ba7bceda11d1953a0000e82de14a/content.htm
SPAU - for repository Objects Changes
see the doc
SPAU
http://www.sap-img.com/bc018.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/068d380be34e6ce10000009b38f842/content.htm
http://help.sap.com/saphelp_46c/helpdata/EN/60/d6ba7bceda11d1953a0000e82de14a/content.htm
Please find below, answers to your questions:
1.What objects will come in SPAU and SPDD?
Ans: All the objects which are modified, after tansporting to the current system,
will be listed in SPAU and SPDD. SPDD contains the list of all modified Data Dictionary objects, like tables, dataelements, domains,view...etc. The rest of all the modified repository objects will be listed in SPAU.
What happens to the modifications done in the older version when we upgrade the version? (with Modification assistant and w/o)
Ans: After the initial upgrade happens, we have to do adjustments from SPAU/SPDD to maintain or reset the changes. That is, from the list of objects in SPAU/SPDD, you have to either carry forward the changes to the new version, by choosing the option ADOPT CHANGES (available on right click) or RESET TO ORIGINAL (available on right click).
Will they come in these transactions?
Ans: yes, they will be listed in these transactions, after the BASIS updgrade activity.
And what if we apply some patches(Notes) to the system? What is the impact of these patches to the SPAU transaction?
Ans: Patches will be supported by the version upgrade. In case of notes, we have to verify whether these notes are supported by the new version (you can go into http://www.service.sap.com/notes to verify this. Also, we have to analyze whther the code in the note is already incorporated in the new version. In this case you can ignore the chanes choosing RESET TO ORIGINAL option
http://help.sap.com/saphelp_erp2005vp/helpdata/en/2e/6d66587d9011d396b60000e82de14a/frameset.htm
If you have applied any OSS notes to objects in your system, the hot package may overwrite these objects.
SPDD is used to identify dictionary objects
and
SPAU (repository objects), will identify any objects where the hot package is overwriting changes you have made through OSS notes.
You must check all objects identified in SPAU and decide whether you need to reapply the OSS note or reset the code to the original SAP Code.
Also once the changes have been done you would see a green traffic light.
If you double click on the modified object it will show you a split window where on the left you will have the original version and on right the modified version. So you can choose which to keep and which to reject. You may keep the modified version incases where you know that the notes will only be pakages in the next version.
http://help.sap.com/saphelp_47x200/helpdata/en/2e/6d66647d9011d396b60000e82de14a/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/2e/6d66647d9011d396b60000e82de14a/frameset.htm
http://www.sap-img.com/bc018.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/068d380be34e6ce10000009b38f842/content.htm
http://help.sap.com/saphelp_46c/helpdata/EN/60/d6ba7bceda11d1953a0000e82de14a/content.htm
http://www.sap-img.com/bc018.htm
http://www.sappoint.com/oss/spamspau.html
http://help.sap.com/saphelp_nw04/helpdata/en/fe/4b284837bf11d5b3bf0050dae02d7c/content.htm
http://help.sap.com/saphelp_webas620/helpdata/en/83/7a18ecde6e11d195460000e82de14a/content.htm
http://64.233.167.104/custom?q=cache:nJasGnXhh4sJ:www.asug.com/client_files/Calendar/Upload/SAP%2520Upgrade%2520Lessons%2520Learned.ppt+spau(SAP)&hl=en&ct=clnk&cd=5&ie=UTF-8&client=pub-3723304925932908
Also the following link is very good
http://www.sapgenie.com/basis/starter.htm
Regards,
Naresh

Spau without modification assistant

Hye all,
Im into upgradation project, In spau tcode > without modification assistant> programs, when im going for version management its displaying some 10 modified versions of tht program, now my Q is that from tht versions which i have to keep in my new version?
Full points will be rewarded.
Thanks,
Vibha

hi,
you have to compare with the version which is existed currently in Production(old version) and the latest one.
sudheer.A

Modification assistant vs without modification assistant

Hello All,
Can any one explain what is the difference between them?
Thanks,
Vibha

hi
Modifications With the Modification Assistant
If the object has not been adjusted in transaction SPAU, a traffic light appears in front of the object. In the Modification Browser these objects are highlighted. When using Reset to original the active version on the database is confirmed as the new original version. The object remains unchanged. Only the modification data is deleted. When using Modification adjustment the version imported in the last upgrade or Support Package is saved in the modification logs as original. In addition, there are the modifications from the adjustment. The Modification Browser (transaction SE95) gives an overview of these modifications.
If the object has been adjusted, in SPAU either a green checkmark or a stop sign appears in front of the object. If an adjusted object is reset to original, the active version is replaced by the original version saved in the modification logs. The modifications made using the Modification Assistant are lost when you Reset to original.
You can use Reset to original in the category With Modification Assistant also for objects that are contained in note corrections.
Already adjusted data elements cannot be reset to the original version. Edit the data element in the ABAP Dictionary to restore the desired status. You can make use of the version administration to do this.
Modifications Without Modification Assistant, Translations, Migration Objects
If the object appears in the tree in one of the categories Without Modification Assistant, Translations or Migration Objects, always the active version becomes the original version when you use Reset to original. The modification log is deleted, independent of whether the object has been adjusted or not. The object itself remains unchanged. If the object has been adjusted, the user gets a warning message. Unlike with objects supported by the Modification Assistant, the original version no longer exists. The modified active version is confirmed as original version.
regards
ravish
dont forget to reward points if helpful

WITHOUT MODIFICATION ASSISTANT

what exactly does without modification assistant do and how different is it from with modification assistant.
please give more emphasis on without modification assistant part.
it's urgent

what exactly does without modification assistant do and how different is it from with modification assistant.
please give more emphasis on without modification assistant part.
it's urgent

With and without modification assistant

when we do upgrade and in teh upgraded version we can find some objects under modification assistant and some under without modidfication assistant when we run the tcode SPAU..as an abaper what is that we have to do with those objects..Could any one let me know the steps that i have to do with those objects??

check.. may be useful...
We have received many errors and it was really pain to go thruogh each and every error....top of that APO is not giving you vary specific error or some times there are no verbitze for the error..
Follow the steps below will help you lot
Extract the time series to an Info cube before the upgrade
Upgrade the system
De-initialie and Reinitialize the DP/SNP Planning area
Reload the Time series following the upgrade
Adjust the Like profiles
If Old like profile to be used then must assign the planning area to every like profile
If Existing LIKE profile cannot be assigned to several planning area, You must create the LIKE profile for second planning area manuallt with new name
Adjust the Phase-In/Out profile
If Existing Phase-In/Out profile cannot be assigned to several planning area, You must create the Phase-In/Out profile for second planning area manuallt with new name
Adjust the assignment table ( /SAPAPO/FCST_LC was replaced by /SAPAPO/FCST_LC1)
Activate all Infocubes by executing the RSDG_CUBE_ACTIVATE report
Check/Adjust the palnning area Data source
Convert the Note Anchor tables - Execute /SAPAPO/TS_NOTES_CONVERT_40 Report
If inconsistence - execute /SAPAPO/TS_GEN_DOCTAB_CHECK report
Check the converted notes for interactive planning
You must create the DB tables for the planning object structure/planning area - using taransction /SAPAPO/RLGCOPY
Realignment and copying steps must be stored in new DB tables
Adjust planning object ID with /SAPAPO/TS_D_OBJECTS_COPY

Weird graphics and other issues with internet explorer in all versions.

One of our laptops has an issue with their Internet Explorer. First, whenever the user logs on and starts internet explorer and navigates to any website, the website loads for a bit but then immediately displays a "Page cannot be displayed" error.
Every single time. If we try browsing again/refreshing the page it loads fine. But during regular browsing, we might get that page again.
Another issue that happens is sometimes the graphics logos won't load properly. See screenshot:
http://i.imgur.com/0usOPpu.jpg
And this happens a lot. If this won't happen, the websites will only load with half its formatting missing.
Now we have:
-Thoroughly checked computer for viruses. Several full scans have been done with MalwareBytes with no issues found. Microsoft Security Essentials has been installed, full scan done, no viruses/spyware/adware found.
-We have tried upgrading to IE11. Same issue. Downgraded to IE10. Same issue. Downgraded to IE9, same issue yet again. IE was Reset each time.
We checked if it could be a network issue, but none of the other computers connected to the same switch has issue like that.
Any suggestions/ideas to try?

Hi,
I suggest you temporary disable antivirus and firewall, then check the result.
You may try the steps from the links below to check the issue:
"Internet Explorer cannot display the webpage" error
http://support.microsoft.com/kb/956196/en-us
Internet Explorer "Page Cannot be Displayed" error due to Bad Proxy Server Timeout
http://support.microsoft.com/kb/2551554
You may also refer to the computer or device manufacturer website and try installing the latest version of chipset, graphics card and video card drivers and check.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Several Issues with iTunes, please assist.

Good AFternoon Folks.
I would appreciate any feedback or assistacne regarding iTunes and some very frustrating errors I have encounterd. I am running 7.5 iTunes on Windows Vista 64bit, Quad Core. This is my issues I have noticed and HATE:
1. iTunes no longer burns CDs. The green check marks show up, but no data is rippe. Burning doesn't work either.
2. iTunes in Album Art view, album art sometimes just disappers and doesn't come back. I have to got to CD Universe and copy the ablum art since iTunes doens't have the art. Frustrating.
3. iTunes has deleted several albums and songs. Its funny, the information is listed in the library, but when you click on it it says "I can't find it, show me/search, blah". I have lost at lease 9 albums/100 songs. Now I have to go and get my CDs out of a box in the atic to add them back. Man, I knew I should have boacked up the library.
4. iTunes in Album Art coverflow sometimes out of no were adds another picture of an album. So if I have one album (Dark Side) sometimes next to it is another album of Dark Side, just when you click on the second album art it goes back to the first. Makes things messy.
Anyways, these have been my issues with iTunes and I tell ya, if I can't figure out some of the more frustrating issues, I am going to change my software. But what syncs with an iPod Classic? Media Monkey? Thanks folks.

UPDATE. I did a reset and it did remove the old computer from my Wifi Sync screen but now my personal hotspot option is gone, I cannot connect to wifi at all and I still cannot get the phone to sync to iTunes.

Tcode SPAU Objects in the Without Modification Assistant

Hey guys,
I´m working with tcode SPAU, i have some objects with red traffic light, i checked and i can see the active objects, do you know me what can i do for disapear de red light?

Dear Edson,
if it is possible you can reset the object to the standard; in other hands you can manipulate it working using standard transaction (ex se38 for report). In this mode you can solve the custom modification and after this in SPAU transaction you can see it with correct traffic light.
Regards,
Gianluca

Issue with CE 7.2 Trial version Installation

Hi Friends,
I was installing the trial version of CE 7.2 where the installation went smoothly until it reached the step "Install Java engine".
I am running the installation using a desktop user with admin rights.
Here is a brief information about the error,
ERROR 2010-05-25 19:02:36.867 [sixxcstepexecute.cpp:988]
FCO-00011 The step startJava with step key NW_CI_Instance_StartJava -> startJava was executed with status ERROR
telnetPort:0
name:server0
pid:4052
type:J2EE Server
restart:Yes
exitCode:1 (Forced shutdown case)
state:J2EE_STOPPING
statetext:Collecting data
startTime:2010 05 25 19:02:31
elapsedTime:0:00:05
restartCount:0
errorCount:1
cpu:0:00:00
debug:Switched off
TRACE      2010-05-25 19:02:36.820
NWDIState._assertJavaProcessStateProgress() done
TRACE      2010-05-25 19:02:36.820
NWDIState._assertJavaProcessStatesProgress() done
TRACE      2010-05-25 19:02:36.820
NWException thrown: nw.progress.startupProcessFailedError:
Java process server0 of instance CE1/J00 increased error count to 1. Giving up.
Any idea how to get going.
Thanks,
Suresh

Simon,
I did a few things that solved my problem. However there could be a bunch of reason for you to get this error
For ex, Operating System Collector error or problem with the paging etc.
Can you elaborate your problem with the following details:
1. Your observations of the errors through the SAP Management Console
2. Your machine OS and RAM details.
3. Are you going in for a fresh installations? or did you uninstall CE before?
May be I can help if you are facing the same issues, I did.
Regards,
Keerti

Issue with Adobe Acrobat Pro XI Version 11.1.10

Using Adobe Acrobat Pro XI version 11.1.10 when I try to delete a page I get an error message, "one or more pages are in use and cannot be deleted". I would like to delete the pages?

Hi Frank,
This type of error usually occurs when two or more than two programs are accessing the same file at a point of time.
Does this issue occur with that specific pdf or with other pdfs too?
How about if you make a copy of that pdf and then try deleting pages from that copied pdf? Do let me know if that works.
If possible...Can you mail me that pdf file at [email protected] so that i can check this issue at my end?
Regards,
Rahul

Issue with Adobe PDF Ifilter Extension version 11

Dear Friends
Come across few issues while determining correct version of Adobe PDF Ifilter Extension
In my local laptop I installed Ifilter extension 9.0 but unfortunately this version is no longer available for further download.
Latest version is 11.0 and I downloaded from below link.
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
Just for verification, I uninstalled old version(9.0) and installed the above version(11.0) but going forth PDF indexing stopped working.
I have a requirement of PDF file content search and using Lucene.Net for this purpose. Lucene indexer that I have written is reading PDF content using PDF filter extension.
I noticed above code stopped working for any site hosted on IIS. However console,desktop and IIS express applications are working fine.
For further verification, I installed the same component in another laptop also but ended with same experience.
Please provide some input.
Regards Paul

Hi Bibhas,
Please configure iFilter as mentioned in the doc: http://www.adobe.com/devnet-docs/acrobatetk/tools/AdminGuide/Acrobat_Reader_IFilter_config uration.pdf
Regards,
Rave

Iphone syncing issues with PC - wanting 11.1 version of iTunes or better. Downloaded but it still fails.

Are people having syncing problems with iPhones ios 7 with itunes? I am getting a message insisting that I need to download iTunes 11.1 or better for the backup and sync to work. Having downloaded 11. it still doesn't work. Anyone else having that problem?

Okay, iTunes 11 (which version?) has been downloaded, but was it installed?
Downloading and installing are not the same thing.
What version of iTunes is actually installed on the computer?

Is anyone having issues with installing the 32 bit version of Adobe Presenter?

I am trying to install the 32 bit version of Presenter on my computer from the downloaded file on the website. I have an authorization code I put in and then when it starts to download it asks to insert the disk when there is not one. Below are the specs for my computer:
Windows 7, Microsoft Office 2010, PowerPoint version 14.0.7166.5000 (32-bit)
Any suggestions???
Thanks,
Chris

After downloading, please do not go inside Presenterwin32” folder or the “Presenterwin64” folder .
Use the setup.exe that is outside these folders. It will automatically detect whether your PowerPoint is 32 or 64 bit and will install the corresponding Presenter.
Hope this will resolve your issue.
Thanks
Alpi Agarwal
Adobe Presenter Engineering Team

Issues with Calendar Printing Assistant (Exception from HRESULT: 0x80010105 (RPC_E_SERVERFAULT))

Hello,<o:p></o:p>
We have
been using the Calendar Printing assistant for a while an in the last 2 weeks
we have been receiving the following error on some of our shared calendars.<o:p></o:p>
There was a
problem accessing events for folder "User Name". Original Microsoft
Office Outlook 2007 error message: The RPC server is unavailable. (Exception from HRESULT: 0x80010105 (RPC_E_SERVERFAULT))<o:p></o:p>
Our current
configuration is:<o:p></o:p>
Server
Side:
Exchange 2010 on Windows Server 2008 R2 Standard SP1<o:p></o:p>
Desktop
Side:
Windows 7 Pro 64bit SP1
Office 2010 32bit <o:p></o:p>
I came
across a similar issue someone posted on http://answers.microsoft.com/en-us/office/forum/office_2010-outlook/office-2010-32bit-windows-7-64-bit-calendar/14b8bd09-ea6a-4302-96b4-16d09c3c0391
and was redirect to this site due to it possibly being an exchange issue.
Any help would be appreciated.<o:p></o:p>
Thanks,
AC<o:p></o:p>

Hi,
Exchange server does not provide Calendar Printing assistant feature.
Is it an outlook add-ins?
Please check whether shared calendars can work properly in OWA. If there is no issue in OWA, the issue should not be related to Exchange server.
If the issue happens in OWA, please collect details of errors and post them here for more troubleshooting.
Thanks,
Winnie Liang
TechNet Community Support

SPAU issues with: Without Modification Assistant: No versions found

Similar Messages

Maybe you are looking for