SPAU list contains SAP notes with 'Unspecified Adjustment Mode'

I'm just completing an upgrade from 46c to ECC6 and I have reached the SPAU stage. In my list of adjustments all the SAP notes have the status of 'Unspecified Adjustment Mode' with a question mark. I think they should be either green, red or yellow to indicate what to do next. Is there something I need to do to get them into that state?

Seems like for some reason the adjustment mode job didn't finish... to restart it just click on the question mark and that should process it, then you will see a semaphore. the job can take a few minutes.
Regards
Juan

Similar Messages

REQ: List of SAP notes related to QM

HI,
Can anyone help me with a list of SAP notes name/no. related to QM?
Thanks in advance!

Swarnanli
its really very difficult to get such list directly.You have to get the Market place lo-gin & check relevant to QM in QM category"Its very Huge list

How can I install attachments for SAP notes with zip-files ???

How can I install attachments for SAP notes with zip-files ???

Can you elaborate on your question? How exactly is your question related to SAP NetWeaver Portal: Application Integration? If you are really asking how to install attachments contained in SAP notes, there is no automatic/general way and you should ask your question in the Software Support and Maintenance space to begin with. What SAP note(s) are you looking at installing?

List of SAP Notes

Dear All,
I need link from where i can find out list of SAP notes for 2010-11.
Regards,
Pranav Dave

Hi.
There is no list of all SAP Notes for a given time frame. You can search for SAP Notes on the SAP Service Marketplace. SAP Note Numbers are currently in the interval 1 to approximate 1570000. A lot of Notes between those numbers are not released for customers (used for internal documentation, outdated, product out of support...) and the vast majority of the Notes will not be relevant for the product you are using and the area you are interested in.
There are some collections of SAP Notes relevant for a specific area here in the SCN but for most cases it's best to search in the Service Marketplace for your specific area.
/Jan

List of SAP Notes - 2010

Hai.
Need list of SAP Notes for this year for India Payroll
Edited by: ECCHCM on Aug 9, 2010 1:19 PM

Hi ECC,
hope u r doing good.
There are some SAP data aggregators which u can use to get all the latest Releases, Notes, Updates, HRSP's.
for eg : http://www.sd-solutions.com/SAP%20HR%20HRSP%20Update.html
which u can subscirbe for free for samples, chk it once,
hope its useful for you.
Regards
Rohit.S

Programe name list for sap notes

hiii
pls tell me programe name for following sap notes..so i can check that all patches r running successfully on development ..
note 1308759
note 1315776
note1317619
note1321949
note1329046
note1331241
note1340766
note1355062
note1361644
Regards
Rekah sharma

Hi Rekha,
You can check that yourself on www.service.sap.com => Search SAP Notes. Enter the note no. & goto corrections.
Login with your SDN id & pwd.
Else, login to SAP & goto SNOTE transaciton. Goto => Sap Note browser.
Enter the note number & click Execute.
Double click on the output record & it will dispaly the correction instructions along with program name etc.
Thanks,
Best regards,
Prashant

CS4 Show tool tips not functioning in adjustment mode

Show Tool Tips function is not functioning(no display) in any adjustment panel. Was working previously. It is checked in preferences and does work on uppermost main tool bar. At times it was slowish to respond but eventually did. Working with PS4 in Design Premium. Checked function box on and off several times as well as opening and closing program and also shutting down computer. Any help or something else I need to look at in preferences? Thanks. Bob
Edit: Tool Tips function works fine in "In Design" and "Illustrator" so it appers it has to be something in Photoshop

Thank you for your reply.
I tried that link several weeks ago and did a reset, I do not want to do delete the preference files if at all possible. I am certain that you know what my problem is but if you don't mind. I would like to clarify what is going on. Previously in the preferences file under the interface label there is a box to turn on or off the tool tips function. It has always been "on". Whenever I wanted to see what an icon's function was related in a panel I placed the cursor on it an it would show it's function. I. e. make a new layer, mask, etc. It no longer does that when I am in the adjustment panel. The function works when I click on it and that is not a problem. All I want is the tip or hint or label as to what the icon's function is to appear and that is what I ubderstand is what the show tool tips function I have CS3 running on another machine and this function it works fine. If I turn it off in the preference fill it no longer works I also have elements 8 on my daughters laptop and that is also fine...on works, off doesn't workI do not have any problems in the tools venue. All function properly and all sub menus work fine.
Any other suggestions will be appreciated. Thanks again for replying

Variable list updates in cli with cdb.vs.mod when values have spaces

Hi -
I keep variable lists for composite components in SVN - stored in the same format they're downloaded from the variables settings screen (don't forget to restore the missing semi-colon on the next-to-last line). Then the build scripts run this:
        cat $VARLISTFILE | gawk '
        BEGIN {
                PREVLINE=""
                NOTFIRSTLINE=0
                if ( NOTFIRSTLINE ) print PREVLINE";"
                PREVLINE=$1
                NOTFIRSTLINE=1
        END {
                print PREVLINE
        ' FS=';' OFS='' ORS='' > ${VARLISTFILE}.n1to put them into a format where they can be checked back into N1 like this:
        cr_cli -cmd cdb.vs.mod -of /dev/null -vs "NM:/some/path/to/component:${VARLIST}" -vars `cat ${VARLISTFILE}.n1` exp:$HOME/.n1confThis has been working great, but suddenly we ran into a new variable that has a space in it - namely it's a crontab like value:
mailLifecycleSendSchedule=0 0 * * * ?;
I've tried all sorts of ' " and [] combinations but can't seem to get these to work via CLI. Note that importing them from a file through the UI works just fine. Any ideas?
Thanks in advance,
J

Ah - hah, it was just a simple matter of extra quotes around the offending string:
cr_cli -cmd cdb.vs.mod -of /dev/null -vs "NM:/some/path/to/component:${VARLIST}" -vars "`cat ${VARLISTFILE}.n1`" exp:$HOME/.n1conf

Is the SAP note (old, 2001 year) valid?

Hi!
I am trying to create source system in BW to connect from BW-system to SAP source system. I can connect to SAP system but when I click on use (RFC connection) I get message "Error during insert in port table". I found SAP note with number 110849 but it is was released in 2001 year. I work with Netweaver 7.0. Can I use this note to correct error?
Thanks,
Olga

Olga,
There is another alternative solution here which does not require transaction SNOTE usage - go to SAP Service Marketplace, open the required SAP Note and check section "Affected Releases", where you will be able to find out information on software components' release versions which are affected. Just find out if the one which you use is in the list - if not, then the SAP Note is not applicable for your system. The second step in case the first one is passed and you found your release version in the list of affected releases is to verify Support Package level: ensure that Support Package which delivers the correction for this software component hasn't yet been implemented in your system (if it or higher Support Packages are implemented, then you should already have the correction applied in your system).
My regards,
Vadim

SAP Note 0001590226 mopz

hi
when i execute and reach the step 'download files' it shows me following message, i should just apply this note in snote in solman? it will impact anything? because currently mopz work fine to confirm download basket
It is required to implement SAP Note 0001590226 version 0009

hi
solman is 701 ehp1, sap_basis is sp6, when i click on help it show the below:
It is required to implement SAP Note 0001590226 version 0009
CL_FREETEXT_MESSAGE
It is required to implement SAP Note 0001590226 version 0009
Message no. MOPZ_MSG_GENERAL004
Procedure
Maintenance Optimizer has determined that your Solution Manager system
has not implemented the SAP Note with the version. As the version of the
SAP Note contains basic important corrections for the support package,
it is required to implement. Check the log to see all required SAP
Notes.
It's mandatory to implement mopz central notes.

Searching for SAP notes about Payment method

I have a problem with Payment method in F110. It shows error FZ/390 but eveything is correct in FBPZ.
For the same currency, same payment method and same bank there is no problem and for others it shows that error.
As we version installed is old, I would like to see whether there is a SAP note related to payment method but I can't find the list of SAP notes related to Payment on this website since it changed.
Can someone help me ?

Dear Christian,
The error comes from customizing where assignment with house bank and
a payment method is made.
Please go to Tcd:FBZP -> Bank determination
1) Choose company code
2) Ranking order : Make sure you have currency + payment method
    assigned for house bank you intend to use.
3) Bank accounts : Make sure that you have payment method assigned
    for currency /house bank/accountID/Bank subaccount.
4) Available amounts : Make sure that 'available for outgoing payment'
    is filled for house bank/account ID from (3) and currency.
Furthermore: please run again transaction FBZP   > PAYMENT METHOD IN COUNTRY   >
> double click on Your payment method
and check if You switched on the flag on:
x Street, PO box, P.O. box pst code <
x Bank details
now please run FK03 for Your vendor    > address
and check Street, PO box and P.O box pst code that You have to fill
After these activities please delete and re-run the proposal again.
I hopr this can help You.
Mauri

Report to find the SAP NOTES applied

Is there a way to generate a report in solution manager which gives us a list of SAP NOTES applied in our R/3 or BW servers.
Thanks,
Kiran

Hi
What Rajeev was tryin to say is... you implement E2E root cause analysis in solution manager system.
sub component under root cause analysis is "Change analysis" this will give details about notes implemented in satellite system.
There is also feature called change reporting, even this can be used for getting details about notes applied.
for more details chk
service.sap.com/diagnostics.
Regards,
Shyam.

SAP note 709354 - DB Clustering

An extract from the sap note:
--->>>
With SAP Enterprise Portal 6.0 on Web AS 6.40, DB Clustering will not be officially supported. This applies to Microsoft SQL, as well as to Oracle Database cluster implementations. The technical feasability of active/active DB-Cluster solutions (like ORACLE RAC or MS SQL in active/active cluster mode) in conjuction with SAP Enterprise Portal 6.0 on Web AS 6.40 Support Pack Stack 01 is under investigation. But there are currently no plans to release it within the NetWeaver '04 timeframe. Since some customer projects have shown that EP 6.0 SP2 is able work on top of an active/passive DB-Cluster-Solution SAP is willing to help customers on a project to get DB-Cluster related problems solved (in case of Oracle this is true for Fail Over mechanisms, but not for Real Application Clustering (RAC)). If you are interested in setting up DB-clustering on your own risk and on a project base, please contact SAP NetWeaver Product Management via your SAP contact in sales or consulting.
<<<---
Would someone from SAP like to comment on this, does it mean that active/passive clustering as already supported or that ANY mode of clustering will be unsupported. And within the timeframe of NW04?? Isn't that until around 2013?
Has anyone had any experiences with active/passive clustering, especially Oracle on Windows, with EP6 SP3 and higher?
Although the note indicates that it 'can (and probably will) be changed without notice' it remains a slightly worrying note, as I'm sure we all want to cluster our production portal central instance and database don't we?

The problem no longer exists. If you maintain the codepages equally in the external DB and in the SAP BW DB, everything should work fine.

Sap note applying

Hi Folks,
I need to apply Sap note 791240 in my dev system.I have run SNOTE & down loaded note .But i cannot see that note in the NEW list.Can any body let me know whether it is down loaded to the system or not.Also is there any other go to apply THE ABOVE NOTE.Please help me out on this issue.
Thanks in advance,
Regards,
chandu

Hi Rohit,subash
when i tried to implement that note i got a screen saying to upload some list of sap notes n i did but finally after giving reauest no it terminated does this going to make any thing wrong in my dev system?
Please suggest me what exactly i need to do.
Thanks guys in advance,
Regards,
chandu

Need for Sap Notes Downloads & implement

Now for upgrade from 4.6B to CC 6 ,if note/notes for corresponding object in SPAU list is/are not present under Note Corrections root...Do we have to download it and then implement it ...IF yes then how does it get implemented for that particular object..is it automatically done or do we have to give Object Name and its details anywhere..Please do explain and elobarate on it.

yes..you are right..
OSS note automatically implements .. you need not give any object details...
to download and implement ..
use tcode SNOTE.
click on download button ..then enter required note number ..after download it'll be stored in 'New' tab... place cursor on note number then press 'F8'( execute button).
It automatically implement note..and creates transport request as well...

SPAU list contains SAP notes with 'Unspecified Adjustment Mode'

Similar Messages

Maybe you are looking for