SPAU problem- adopt modifications
Hi Guys,
In SPAU when I click on adopt modifications, and in the include program when I click on the insert, it allows me to insert just one character. It doesnt allow me to include extra code like it used to allow me to do in function module.
Could you please help me what has to be done ?
Regds
Sachin
Hi
Actually the program "LFSKBF01" has been modified by customer. A patch which is applied has some changes pertaining to this program. During the patch update SAP will ask in these cases whether to retain the customer code or to overwirte the SAP changes.
These changes can be checked using SPAU transactions. There are there different lights in this transactions,
'green' which means the program changes and SAP updates (thru patch) does match or no implications.
'Amber' - This shows that some changes are there but might note have any impact.
'Red'- as the color suggest, it has some difference in teh code and might need to take a deicision whether to retain the customer code (which is existing) or to import the new code.
You can check the codes differences using SPAU and take a decision.
Hope it was useful.
Similar Messages
-
SPAU problem in SAP 4.7
Hi All,
We are upgrading from SAP_APPL release 21 to 27. While doing SPAU of one include, I have selected the option 'Adopt Modifications' and have added some business specific code.
At that time we missed to add some code.
At preset, this object is locked under the Transport request created by me.
Now when I try to modify the include using SE38, it is not allowing to change the object with the message as below. Also the object is not available in SPAU for these modification.
Please help in this
<b>Message I get</b>
<b>Carry out modification comparison for REPS LFSKBF01 first. No changes
possible
Message no. EU526
Diagnosis
You are trying to edit an SAP object which has already been changed or
enhanced in the current system.
A new version of this object, changed by SAP, has been imported into the
system with a Release upgrade.
The new SAP version has not been reconciled with the modified version.
System Response
The system will deny access in change mode or enhancement mode until the
objects have been reconciled.
Procedure
Run the modification adjustment (SPAU) for the object. If the object is
supported by the Modification Assistant, you can adjust it by clicking
the stoplight.</b>Hi
Actually the program "LFSKBF01" has been modified by customer. A patch which is applied has some changes pertaining to this program. During the patch update SAP will ask in these cases whether to retain the customer code or to overwirte the SAP changes.
These changes can be checked using SPAU transactions. There are there different lights in this transactions,
'green' which means the program changes and SAP updates (thru patch) does match or no implications.
'Amber' - This shows that some changes are there but might note have any impact.
'Red'- as the color suggest, it has some difference in teh code and might need to take a deicision whether to retain the customer code (which is existing) or to import the new code.
You can check the codes differences using SPAU and take a decision.
Hope it was useful. -
Probleme de modification des documents en pdf
probleme pour modifier un document qui est en pdf
Bonjour,
En fait il faut différencier deux types de modifications. Il y a celles qui consistent à ajuster les propriétés de ce dernier en vue de conformation prepresse (modifications de couleurs, suppression d'élements…) et celles qui visent à éditer le contenu comme si le PDF devenait un fichier natif. Votre demande relative à l'utilité d'excel online me fait croire que c'est la deuxième voie qui vous intéresse. Tout dépend du degré de modification espéré. Voulez vous corriger une coquille de texte ? Remplacer une image ? Rajouter des objets ? Depuis Acrobat Pro jusqu'aux plugins dédiés (PitStop), il existe de nombreuses possibilités d'édition.
Vous pouvez également tenter votre chance en ouvrant le PDF avec Illustrator. Avec un peu de chance, l'aspect sera plus ou moins préservé. Encore faut-il que le contenu du PDF ne soit pas qu'une image.
Dernier recours, utiliser un plugin comme PDF2ID, qui vous permettra de convertir vos PDFs en documents natifs InDesign avec évidemment un taux de conversion non absolu.
Dans tous les cas, non, excel online, offline, subline, underline, ni aucune autre version de logiciel Office ne vous permettra d'éditer un PDF.
Pour ce que ça vaut,
Loic Aigon
http://www.ozalto.com -
Scheduling job problem and modification in the bat file
Dears ALL
i am using the following script in windows 2003 server for oracle database 10 g i have one problem of scheduling the task i scheduled it successfully on windows scheduled task program but its not running at scheduled time and even when i run this bat file manually this give the security warning The publisher could not be varified,Are u sure u want to run this software? when i click on yes then it runs the bat file may be thats the problem in aslo scheduled how to remove this warning
2ndly i want to do some changes in my script like this that it removes the same file older than 3 days means it jst have the last three dumps and will remove the olders the script is as
@echo off
CLS
REM ********************************
SET V_USER=riyadh
SET V_PASSWORD=riyadh
SET V_DB=vis
SET V_DMP_PATH=D:\dump\
REM ********************************
ECHO.
SET EXP_PATH=D:\oracle\visdb\9.2.0\bin\
SET MONTH=%DATE:~4,2%
SET YEAR=%DATE:~10,4%
SET DATED=%DATE:~-7,2%
ECHO ECHO CONNECT AS : %V_USER%/%V_PASSWORD%@%V_DB%
ECHO Backup on : %DATED%/%MONTH%/%YEAR% (DD/MM/YYYY)
ECHO SAVE AS : %V_DMP_PATH%%V_USER%_%DATED%%MONTH%%YEAR%.dmp
ECHO TITLE BACKUP ...%V_USER%_%DATED%%MONTH%%YEAR%
echo.
%EXP_PATH%EXP.exe %V_USER%/%V_PASSWORD%@%V_DB% file=%V_DMP_PATH%%V_USER%_%DATED%%MONTH%%YEAR%.dmp log=%V_DMP_PATH%%V_USER%_%DATED%%MONTH%%YEAR%.log
THANKS A LOTSolution:
Run gpedit.msc
Go to User Configuration >> Administrative Templates >> Windows Components >> Attachment Manager
i have followd all the steps as it is but when i open the Inclusion list for moderate risk file types its not configured and the msg below this is Supported on: At least Microsoft Windows XP Professional with SP2
and i have windows 2003 server so how to add it or enable it etc
THANKS a lot for ur reply -
SAPGUI 7.20 patch level 5 problem with Modification Assistant
I'm using SAPGUI 720 patch level 5 on a Windows 7 sp1 machine. There is a serious issue with modification assistant not working properly.
For some reason it does not focus on the correct code line and automatic comments are not inserted either.
Anyone else facing this issue?Hello Jason,
sounds as if this could be related to the correction from note 1569250 "Focus set to textedit toolbar on roundtrip".
I assume that a textedit control is used in the Modification Assistant - right?
If so the easiest solution for you is to apply hotfix 2 we published couple of days ago (hotfix 2 is available on SAP SMP).
Best regards,
Frank -
Probleme de modification de couleurs entre LR4 et CS5
Bonjour
Je me suis livré à l'expérience suivante. Dans CS5 je travaille dans l'espace Adobe 98. J'enregiste ma photo en psd. J'importe ce fichier Psd dans LR et le reexporte immediatement dans l'espace Adobe 98.
Quand je compare mes deux photos, l'original et celle qui a subi l'import/export dans LR, je constate une difference importante dans les couleurs (principalement la saturation des rouges)
J'ai refait la même experience en partant de photos dans les espaces Prophoto ou sRGB, je ne constate pas cette difference...
J'en déduis que LR4 n'arrive pas à interpreter mon profil icc Adobe 98.
Quelqu'un a-til constaté ce phénomène, quelqu'un peut-il refaire la même expérience, quelqu'un a-t-il une explication?
Merci d'avanceBonjour Roderic et merci de votre réponse.
Je ne suis pas sur de vraiment comprendre ce que vous voulez que je tente mais j'imagine que vous voulez que je retire l"open FPGA Reference" et que la communication se fasse par variables globale. Du genre j'ecrie "y" dans une variable globale et dans le programme FPGA je lis la variable globale.
Mais même si cela fonctionne, à terme j'installerais des programmes beaucoup plus complexe donc je ne peux tout reprogrammer comme ça.Il faut que je trouve une autre solution qui ne me fasse pas modifier mon programme FPGA.
Pour info, l'erreur est "-63192" et la source "niLvFpga_Open_PCI-7833R.vi" donc c'est bien au niveau de la communication entre Host et FPGA.
Merci
Cordialement,
Vincent. -
Hi all,
I have an issue,In SPAU list I click one Function module which is in Red colour,it turned to green,
When i saw that Function module through se37 found all the code is missing in the updated Function module if i wants to reset the original Code,How can i do it with out Access Key,
Thanks,
Girish.1) Click on Adopt Modification
Left side new system code
Right side old system code
Text in blue indicates that corresponding code is not present in another version.
We have to refer to old system (right side in split editor) texts in blue which means that particular block is missing in new system.
1) Press button modify button to scroll through modifications
2) To copy code of old system, place your cursor against modification (right side of split screen) and press Copy to accept modifications. The text would be stored in buffer.
3) Place cursor in left side of split editor and clink on insert. It will paste the old system block in new system.
To: add insert block of old system, press insert,
add replace block of old system, press replace
add Delete block of old system, press delete.
Keep the previous Transport Request number in Comments for future reference.
When you say copy, only the code between insert block is copied in buffer.
Do:
- Syntax check after each modification adoption.
- Compare both the versions at every block of modification.
- After successful modification, activate the object.
- Sometimes, changes would be adopted automatically. (mostly for objects where traffic light green is indicated), but you could follow the same steps as above for adjustment if it is not adjusted.
Cheers,
Thomas Mann. -
Modification Adjustments (SPAU & SPDD)
Dear all,
We are going for ecc6.0 upgrade from 4.7c.
While doing modification adjustments in SPAU & SPDD we thought of doing RESET TO ORIGINAL to all objects.
Customer enhanced more than 20 standard programs. They want their older enhancements as well as new version.
How to approach this situation?
If we give RESET TO ORIGINAL whether the older enhancements will come automatically?
Expecting clear answer please.
Kind Regards.Hi ,
You should go for Adopt Modifications for Customer enhanced programs or else the Customer enhancements will not get reflected in ECC 6.0.
If you give RESET TO ORIGINAL the older enhancements will not come automatically instead the ECC 6.0 functionality will be there. You have to go for Adopt Modification.If the traffic signal is Green in SPAU and you click on adopt modification the Customer changes will be automatically adjusted.If the traffic signal is Yellow Customer changes will be partially reflected and the remaining one's we have to do manually.If the traffic signal is Red we have to Adopt Modifications manually(i.e we have to compare both versions and copy paste the custom code)
Thanks,
Jay.... -
Spau without modification assistant
Hye all,
Im into upgradation project, In spau tcode > without modification assistant> programs, when im going for version management its displaying some 10 modified versions of tht program, now my Q is that from tht versions which i have to keep in my new version?
Full points will be rewarded.
Thanks,
Vibhahi,
you have to compare with the version which is existed currently in Production(old version) and the latest one.
sudheer.A -
ECC 6.0 Upgrade - (Customer Modifications in Sturctures lost )
Hi,
We are doing a 6.0 Upgrade and found out that most of the customer modification in the original 4.6C system are lost during the upgrade.
Example is structure KOMKDZ ..we had around 12 fields/components in our original system and when we applied the upgrade theis structure is blank. Did anyone of you faced the same problem and how did you resolve it? Its so frustruating that appling upgrade to the working system, sap clears the custom modifications.
Any help would be really appreciated.
Thank you,
Best regards,
Umesh.Hi,
I think while doing SPDD analysis you should encounter the above modifications done to a standard table.
You should adopt modifications and manual additon of fields is required.Means you should create append structure in the newly upgarded system too.
SAP wont clear any custom modifications done to a standard objects .rather it will be shown during SPDD and SPAU analysis and its ur choice whether to adopt changes available in the new system(Reset to original) or to Adopt modifications in the old system.
regards,
Lakshman. -
SPAU Adustments for function module
Hi,
I ran SPAU and for one of the function module there was a red stop box, when I clicked on that I got the following message, so can you please tell me what I am supposed to do with it:
HRF_READ_TAX_W_CNTR1_US 10/06/2009 HR Forms: Read dimension TAX_US for MetaStar PAY_RESULT
Open Problems
Assistant has been switched off, please maintain accordingly with tool
Open Problems
HRF_READ_TAX_W_CNTR1_US Modification assistant switched off Upgrade ended.
Thanks,
RajHi,
You wont be able to get any help by clicking on Red button Icon. Please check the version management of the function module.
Compare old and newer version and based on the changes you can go either for Adopt Modifications or Reset to Original.
If any Custom modifications are done then its better to go for Adopt Modifications Else if any standard changes Done By SAP itself go for reset to original.
Regards,
Lakshman. -
Refresh or Regenerate SPAU List
H,
I have deleted a Transport Request related to SPAU Adjustment. In SPAU (All those objects with Yellow Lights under W/o Modification Assistant Tree) i reset them to Original and System prompted for a Transport Request. Once the reset is done, I thought i should have used Adopt Modification (Sicne these Objects fall under W/o Modification Request Category). So i deleted the already created Transport Request in this Adjustment. Now i could not see those objects in SPAU list. To add another Transport Request, i have to pick them from SPAU list. But those Objects are not listed now in SPAU list. What should i do to get those objects back in SPAU? Is there any program to be Run to regenerate/Refresh the SPAU List. I hope i have described the issue in more detail. Please let me know if it is not clear. Please let me know your Solutions to this problem. I need your help urgently.
Thanks and Regards,
Kannan.Hi Peter,
Thansk for your reply. They are listed in the SE95 with New Transports under the Reset Objects Tab. But i have deleted that Transport Request hoping that Deleting the transport Request will show up the Original SPAU List (Before Adopting Modification). So the Reset Objects List has the Invalid Transport request. Is it possible for me to attach other transport request to these Objects.
Thansk and Regards,
Kannan -
SPAU query for documentation and maintainance and transport object
Hi All,
I am working on upgrade using SPAU. In without modification assistant there are two nodes and objects in red- 1. maintenance and transport object 2. Documentation.
When I click on maintenance and transport object , I get the red button for cluster maintenance SOBJ.I try to open in maintain/change mode but it is not giving any option to activate or anything. As it is maintenance it gives an option to create a new entry only.( see attached capture1 & capture2)
What do we need to do to make it green ? I tried to search but did not get anything related to this. I have attached screen shot for the same.
Also for documentation, what needs to be done as adopt modification ? I get the pop up for create modification when I click on data element documentation. Do I need to create modification ? what should be the template type ? (Please see the attached screen shot capture3 ).
Also for both I get 'no version found'.
I would really appreciate your help.
Thanks,
NikiCan anybody help/guide on this please ....
-
Hi,
we have upgraded from 4.6c to ECC 6.0 and i have a query regarding SPAU list, for couple SAP standard programs we have adopted modifications but an hour later we decided to reset to orginal .
Is there any way to achieve this.
Thanks
DavidHi
I did tried to retrieve the old version in my case which is upgraded version, but for some reason its asking for access key
Let me know
Thanks in advance
David -
Role of spau and spdd and steps to starup upgrade
hi all
i want to know about the steps to start upgradation and role and at what stage sapu and spdd come in scene.
Thanks.T.code SPAU and SPDD are used for adjusting Standard Objects.
1) SPDD: This is for data dictionary corrections.
This is mostly done by BASIS people .
2) SPAU: This is for repository objects (programs, functions, classes, etc.).
This is done by an ABAPer
In this Transaction for all Objects you will be doing a version Comparsion.
If you find any changes are done by the Customer in the Standard u will be Carry forwarding those changes in the new sytem which you are upgrading by ADOPTING MODIFICATIONS.
If you don't find any Customer Changes u will RESET TO ORIGINAL.
Edited by: vasanth kumar vikram prakash on Mar 6, 2008 10:25 AM
Maybe you are looking for
-
Re-Create the "Exchange" virtual directory in the "Exchange Back End" Site on Exchange 2013
Sorry for this stupid question. In IIS, I accidentaly deleted the "Exchange" virtual directory in the "Exchange Back End" Site on Exchange 2013 (Mailbox Role). What I need to know is the physical path to re-create it. Thanks
-
ZCM 103 RC1: DLU with Roaming Profile on W2K3 doesnt work
No change from Beta2 to RC1: - DLU-Policy assigned to a User-Source on XP-Clients works (with Roaming Profile Policy to a Netware Server) Do need the same on a W2K3 (Terminalserver), but: - DLU doesn't work if the policy is assigned to a User-Source
-
Securing the IIOP Listener/Handler with SSL
Hi, I am looking into securing CORBA client connections to ISL/ISH with SSL. Client authentication is not needed, just encryption and server authentication. Having looked through the documentation I have a couple of questions about this. 1. The "Usin
-
Help needed regarding OIM login using wallet code
Hi All, When i am trying to access the username and password from the weblogic credential store following exception occurred...Can any one help me plzzz.... The exception is................ javax.faces.el.EvaluationException: java.security.AccessCont
-
I gave my gamecenter account to my friend but now i dont want him to use it anymore. But he refused to sign-out so i changed my apple ID password, Does this stop him from using my account? Does it sign him out and asks for my new password???