Spc for SPA122 "Restore has failed"

Hello
I'm tyring to extract the .xml config of my SPA122, then edit the .xml and then upload it to my SPA122.
My problem is that I always get the "Restore has failed." -message when I try to do "Restore Configuration" over the webinterface.
For troubleshooting I've created this example:
C:\spa112 conf generator>spc --sample-xml test.xml
spc: generated SPA122 sample configuration test.xml
C:\spa112 conf generator>spc --xml test.xml config.cfg
spc: generated SPA122 config.cfg len=47552 bytes
Even with this generated config file by the sample .xml file, I get the same error ("Restore has failed").
I also tried with several encryption options provided by the spc tool.
Is there a certain way the file must be encrypted?
What am I doing wrong?
Any help is greatly appreciated.
regards
Lenny

try this apple restore knowledge base
http://docs.info.apple.com/article.html?artnum=307219-en

Similar Messages

HT201210 When I try to restore my ipod, I get a dialogue box that pops up that says the restore has failed because the requested resource cannot be found. What is the problem, and how can I fix it?

When I try to restore my ipod, I get a dialogue box that pops up that says the restore has failed because the requested resource cannot be found. What is the problem, and how can I fix it?

Hi IG viper,
Placing your iPod into recovery mode should allow you to successfully restore the device.
You might see these error messages if any of these are true:
Your device has a beta version of iOS.
You're trying to install an earlier version of iOS (downgrading).
Your device has unauthorized modifications to iOS, also called "jailbreaking."
Use recovery mode to restore your device to the latest version of iOS.
Resolve iOS update and restore errors
http://support.apple.com/en-us/TS3694
Sincerely,
Allen

Iphone: Screen gone black, Won't turn off, Restore has failed, 1.1.3

Hi,
I am having a problem with my iphone after upgrading to 1.1.3. The screen has gone black with a white spinning wheel(resembles a flower sort of).The wheel however is not spinning. I can see the top bar with the time, battery, and signal strength. The phone however will not turn off and restore yields an "Unknown Error (-19). Has anyone else had this problem after updating? Anyone have a fix for it or is this a job for the genius bar?
Thanks for your replies.

try this apple restore knowledge base
http://docs.info.apple.com/article.html?artnum=307219-en

How to get the row that has failed due unique constriant voilation

Does any body knows how I can get the column values for rows that has failed on unique contriant voilation, I am using 10gr2.
Also we don't have license for shadow table error logging, otherwise I could have gotten the row from there.
Any help will be highly appreciated.
Thanks,
Ravi

Hi Ravi,
Prior to OWB 10.2.0.3 you can use the DML error logging features only for the mappings which runs
in ROW based mode.
But from OWB 10.2.0.3 onwards DML error logging features can be used for SET based mappings also.
You can refer the following Metalink notes for the same
1. Note 550036.1 DML Error Logging In OWB 10.2.0.3 And OWB 11g
2. Note 549845.1 How To Use Data Rules And Error Tables Features In OWB10gR2
Thanks,
Sutirtha

HT201272 Having a bad day my iTunes library got corrupted and my back up disk has failed how can I restore my purchases from the iTunes store

Having a bad day my iTunes library got corrupted and my back up disk has failed how can I restore my purchases from the iTunes store? When I try it tells me the pruchases have already been downloaded to this computer.

Does your purchased rmusic appears under the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (music can't be re-downloaded in all countries) ? If they do and you don't have the cloud symbol against them so as to re-download them, then do you still have the entries for them in your library i.e. where you would normally click on them to play them ? If you do then try deleting them from there (iTunes will be seeing them and assuming that you still have them somewhere) and they should then get the cloud symbol for re-downloading in the Purchased link.
If you aren't in a country where music can be re-downloaded then you could try contacting iTunes support and see if they will grant you a re-download : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page,

TS3694 I tried updating my iPod, and ever since it has not worked at all. If I hold in the lock & home button, it will tell me to plug it into iTunes. Once I do that, it says it will restore but every time, restoring it fails. My iPod is not working at al

I tried updating my iPod, and ever since it has not worked at all. If I hold in the lock & home button, it will tell me to plug it into iTunes. Once I do that, it says it will restore but every time, restoring it fails. My iPod is not working at all, and I really have no idea what to do. It is just a black screen, and occasionally the white apple will appear as if it were turning on, but it won't turn on. I just need some suggestions on what to do!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My phone has died. I tried upgrading my Iphone 3gs yesterday to ios. It failed to update, it has failed to restore. Now its just showing a plug and Itunes on the screen. Please help soonest

My I phone is literally dead. I tried upgarding the software yestreday, it refused saying there was an error, I was given an option to restore it, it has failed. Now there is no old software as well as the new software. Its showing a plug and an Itunes signal on top. Thats all that it has. I will be very grateful to receive any form of help out there.

The iOs 5.1 is a huge file that needs to be dowloaded when updating/restoring, your phone hasnt completed the update so its now in recovery mode. Look on the left of itunes, it should say downloads under the store section with a spinning wheel, click that and youll see the update file with a time remaining, wait for that download to finish then try the restore again and it should work

My IPhone is set up with an internet downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro within the phone. My computer will not accept the phone because they say it's a "Developer?"

My IPhone is set up with an internet downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro within the phone. My computer will not accept the phone because they say it's a "Developer?" Help. I cannot not even get passed the activation step on the computer or phone because it will not activate the device.

Hello buddyacw
You would have to restore the iPhone. Download the latest version of iTunes and then follow the steps in the article below to get it working again.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I have restored my ipod many times, yet I still can't back it up because the "session has failed" and error 54. Does anybody know how to fix this?

[Windows user] I have an ipod touch 5th generation 64gb and I can't backup my ipod. I have restored it many times, even in recovery mode, but it still comes up with "iTunes can't backup this ipod because the session has failed," yet it was still plugged in. Also error 54 pops up too. Does anybody know how to fix this?

If a PC try:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Interactive logon process initialization has failed after system state is restored from backup

Recently one of my Windows 2008 server was restored from system state backup, and below error appears before during startup, before logon screen:
"interactive logon process initialization has failed. please consult the event log for more details"
I do not have recovery disk, also repair didn't work, any other solutions?
Thanks.

Hi Justin,
I would suggest you to use sfc to check if there is any systemfiles corrupted :
1. boot from cd
2. sfc /scannow /offbootdir=X:\ /offwindir=Y:\windows (X is boot partition , Y is windows system files partition )
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I rest

I had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I restarted the computer and tried again to run Photoshop and the same error message appeared. The message was followed by a message that stated that I needed to contact Adobe technical support and mention Error: 150.30. I need Adobe technical support to provide me a solution for my problem so I can continue using my Adobe products installed on my computer.

Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene

Why is the message 'Plugin container for Firefox has failed' while using ArcadeOX appearing even after un/reinstalling it all?

I am attempting to play online games using the 'ArcadeOX' plugin.
The game will not load and a window pops up with the message 'Plugin container for Firefox has failed'.
I have uninstalled and reinstalled both ArcadeOX and Firefox several times and still have the same problem.
Windows 'attempts' to find a solution online but still nothing.

I am attempting to play online games using the 'ArcadeOX' plugin.
The game will not load and a window pops up with the message 'Plugin container for Firefox has failed'.
I have uninstalled and reinstalled both ArcadeOX and Firefox several times and still have the same problem.
Windows 'attempts' to find a solution online but still nothing.

"The upload has failed. There was a problem running a virus scan for the file." any ideas???

"The upload has failed.
There was a problem running a virus scan for the file. "
This is the message i get when tryng to update
any ideas?

Error: "svr.VirusScanExecutionError"
An intermittent problem with acrobat.com's underlying virus scan component causes this issue. This issue happens occasionally on a small number of server instances.
The solution is to update the article again. Trying again typically routes you to a different host in the server array.

My iPod appeared to be dead, i plugged it into my computer to charge and it said it needed to be restored. it updated it and now is stuck and my itunes says "waiting for iPod" and has been this way for hours. please help!

my iPod appeared to be dead, i plugged it into my computer to charge and it said it needed to be restored. it updated it and now is stuck and my itunes says "waiting for iPod" and has been this way for hours. i've tried to hold down the home and power button and nothing happens!! my computere and itunes recognizes the iPod, but the iPod its self is completely unresponsive!! and helpoful hints?

See Here...
AMDS
http://support.apple.com/kb/TS1567

I work with a Mac & I had to restore my computer for my time machine back-up. When I attempt to open/edit a photo with either camera raw or photoshop I get the following error message: Error 150:30 , it also sys that licensing for the product has stopped

I work with a Mac & I had to restore my computer for my time machine back-up. When I attempt to open/edit a photo with either camera raw or photoshop I get the following error message: Error 150:30 , it also sys that licensing for the product has stopped working?

Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene

Spc for SPA122 "Restore has failed"

Similar Messages

Maybe you are looking for