SPDD Adjustment for Database indexes during the Upgrade

Hi Experts,
I am currently upgrading our Existing ERP 6.0 SP13 to ERP 6.0 ehp 4.0 with SP 03 and NW 701. I am kind of lost on the SPDD modifications Adjustment. We have 4 objects are in the SPDD modifications under "Without Medications Assistant. All of them are related to Database tables, where our developers created indexes for SAP Delivered Database table object. All of them are YELLOW. If select one of them and go to "Adopt Medications", it brings a Dialog window with
"Database table BKPF. Adjust all objects selected subtree?" --> I clicked on YES
I get the following
Database Table BKPF Table Index Z01
background
The object has been modified without using the Modification Assistant.
Therefore no support is available from the system for transferring your
modifications.
Procedure
   *[Subtree icon]* Before you adjust your  modifications, you can select multiple
objects or a subtree.
*[Check Mark icon]*   If you have selected  multiple objects, you can skip the processing
of this object.
You can use the "Processor/Status" function to add other processors.
If you have modified an object where multiple versions are possible,
then the last version that contains changes has been stored in "version
management".
    *[Pencil icon]* Otherwise, use your own  notations to transfer the modifications to
the new version of the object.
    *[Check Mark icon]* After an object is  inserted in a transportable change request, the
red traffic light icon is replaced by the green checkmark in the tree.
If you do not want any modifications to be adopted, choose the "Reset
to Original" function.
I clicked on the Pencil icon [PENCIL CHANGE] -> it takes me to that object where I DO NOT have any options to adopt the objects....
I am bit of confused, I should get an option to adopt this object, so I can keep the current version and SAP doesnt over write it after upgrade and delete my indexes.
Please tell me what I am doing wrong here.
Thanks in Adamancy
Kumar
Edited by: Kumar Subramaniam on Jun 9, 2009 7:43 PM

OSS note 1658376 (Table index displayed in transaction SPDD after deletion)  is relevant for this and check the below link as well.
http://www.sapdiary.com/index.php?option=com_content&view=article&id=22738:sap-network-blog-extension-index-in-spdd&catid=81:data-services&Itemid=81
Regards,
Gokul

Similar Messages

  • Upgrade fails in the phase STARTSAP_TBUPG during the upgrade of CRM 4 to 5

    Hello,
    Upgrade failed with the below message in the upgrade phase STARTSAP_TBUPG during the upgrade of CRM 4.0 to CRM 5.0
    Error Message:
    SYSTEM START failed, code -1
                 -1: 'startsap.exe' returned an error
                 See file 'D:\usr\sap\put\log\R3up.ECO' for details.
    R3up.ECO:
    SAPup>  Starting subprocess startsap.exe with id 5844 at 20080402142258
    EXECUTING D:\usr\sap\put\exe\startsap.exe name=SID nr=00 SAPDIAHOST=Hostname
    Environment: dbms_type=mss
    Environment: dbs_mss_schema=cdu
    STARTSAP failed
    Details are written to D:\usr\sap\put\tmp\startSID.log
    Process with ID 6276 terminated with status -1
    startSID.log
    running D:\usr\sap\put\exe\sapstart.exe name=SID nr=00 SAPDIAHOST=Hostname -wait
    SAPSTART finished successfully on Host_SID_00, but at least one process doesn't run correctly:
         msg_server.exe, MessageServer, Running, 2008 04 02 14:22:58, 0:03:19
         disp+work.exe, Dispatcher, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, 2008 04 02 14:22:58, 0:03:19
         igswd.exe, IGS Watchdog, Stopped, 2008 04 02 14:22:58, 0:00:00
    D:\usr\sap\put\exe\sapstart.exe=>sapparam(1c): No Profile used.
    It is trying to start the shadow instance and failing by ending all the work process
    DEV_DISP:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      01
    sid        SID
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    150
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        5348
    Wed Apr 02 17:22:10 2008
    kernel runs with dp version 234(ext=109) (@(#) DPLIB-INT-VERSION-234)
    length of sys_adm_ext is 364 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 5348) [dpxxdisp.c   1245]
         shared lib "dw_xml.dll" version 150 successfully loaded
         shared lib "dw_xtc.dll" version 150 successfully loaded
         shared lib "dw_stl.dll" version 150 successfully loaded
         shared lib "dw_gui.dll" version 150 successfully loaded
         shared lib "dw_mdm.dll" version 150 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    Wed Apr 02 17:22:22 2008
    WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0100.qqq.nxst) took 12 seconds
    Wed Apr 02 17:22:40 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5373]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >HOSTNAME_SID_01                      <
    DpShMCreate: sizeof(wp_adm)          22968     (1044)
    DpShMCreate: sizeof(tm_adm)          3642120     (18120)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1296)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 05560040, size: 4281040)
    DpShMCreate: allocated sys_adm at 05560040
    DpShMCreate: allocated wp_adm at 05561B30
    DpShMCreate: allocated tm_adm_list at 055674E8
    DpShMCreate: allocated tm_adm at 05567518
    DpShMCreate: allocated wp_ca_adm at 058E0820
    DpShMCreate: allocated appc_ca_adm at 058E4E70
    DpShMCreate: allocated comm_adm at 058E65E0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 05967490
    DpShMCreate: allocated gw_adm at 059674D0
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 05967500
    DpShMCreate: allocated wall_adm at 05967508
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    ThTaskStatus: rdisp/reset_online_during_debug 0
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 2039 blocks reserved for free list.
    ES initialized.
    WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12553]
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( HOSTNAME) [dpxxdisp.c   11867]
    DpStartStopMsg: send start message (myname is >HOSTNAME_SID_01                      <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 150
    Release check o.K.
    Wed Apr 02 17:23:20 2008
    my types changed after wp death/restart 0x1f --> 0x1e
    my types changed after wp death/restart 0x1e --> 0x1c
    my types changed after wp death/restart 0x1c --> 0x18
    my types changed after wp death/restart 0x18 --> 0x10
    my types changed after wp death/restart 0x10 --> 0x0
    DP_FATAL_ERROR => DpWPCheck: no more work processes
    DISPATCHER EMERGENCY SHUTDOWN ***
    increase tracelevel of WPs
    NiWait: sleep (10000ms) ...
    NiISelect: timeout 10000ms
    NiISelect: maximum fd=1477
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 17:23:30 2008
    NiISelect: TIMEOUT occured (10000ms)
    dump system status
    Workprocess Table (long)               Wed Apr 02 11:53:30 2008
    ========================
    No Ty. Pid      Status  Cause Start Err Sem CPU    Time  Program          Cl  User         Action                    Table
    0 DIA     6916 Ended         no      1   0        0                                                                         
    1 DIA     7724 Ended         no      1   0        0                                                                         
    2 DIA     6044 Ended         no      1   0        0                                                                         
    3 DIA     4300 Ended         no      1   0        0                                                                         
    4 DIA     6992 Ended         no      1   0        0                                                                         
    5 DIA     2412 Ended         no      1   0        0                                                                         
    6 DIA      432 Ended         no      1   0        0                                                                         
    7 DIA     8168 Ended         no      1   0        0                                                                         
    8 DIA     5420 Ended         no      1   0        0                                                                         
    9 DIA     9712 Ended         no      1   0        0                                                                         
    10 UPD     4320 Ended         no      1   0        0                                                                         
    11 ENQ     3476 Ended         no      1   0        0                                                                         
    12 BTC     2676 Ended         no      1   0        0                                                                         
    13 BTC     6816 Ended         no      1   0        0                                                                         
    14 BTC     9636 Ended         no      1   0        0                                                                         
    15 BTC     8356 Ended         no      1   0        0                                                                         
    16 BTC     7004 Ended         no      1   0        0                                                                         
    17 BTC     7284 Ended         no      1   0        0                                                                         
    18 BTC    10048 Ended         no      1   0        0                                                                         
    19 BTC     4560 Ended         no      1   0        0                                                                         
    20 BTC     4196 Ended         no      1   0        0                                                                         
    21 SPO     4268 Ended         no      1   0        0                                                                         
    Dispatcher Queue Statistics               Wed Apr 02 11:53:30 2008
    ===========================
    --------++++--
    +
    Typ
    now
    high
    max
    writes
    reads
    --------++++--
    +
    NOWP
    0
    1
    2000
    1
    1
    --------++++--
    +
    DIA
    3
    3
    2000
    3
    0
    --------++++--
    +
    UPD
    0
    0
    2000
    0
    0
    --------++++--
    +
    ENQ
    0
    0
    2000
    0
    0
    --------++++--
    +
    BTC
    0
    0
    2000
    0
    0
    --------++++--
    +
    SPO
    0
    0
    2000
    0
    0
    --------++++--
    +
    UP2
    0
    0
    2000
    0
    0
    --------++++--
    +
    max_rq_id          7
    wake_evt_udp_now     0
    wake events           total     3,  udp     3 (100%),  shm     0 (  0%)
    since last update     total     3,  udp     3 (100%),  shm     0 (  0%)
    Dump of tm_adm structure:               Wed Apr 02 11:53:30 2008
    =========================
    Term    uid  man user    term   lastop  mod wp  ta   a/i (modes)
    Workprocess Comm. Area Blocks               Wed Apr 02 11:53:30 2008
    =============================
    Slots: 300, Used: 1, Max: 0
    --------++--
    +
    id
    owner
    pid
    eyecatcher
    --------++--
    +
    0
    DISPATCHER
    -1
    WPCAAD000
    NiWait: sleep (5000ms) ...
    NiISelect: timeout 5000ms
    NiISelect: maximum fd=1477
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 17:23:35 2008
    NiISelect: TIMEOUT occured (5000ms)
    DpHalt: shutdown server >HOSTNAME_SID_01                      < (normal)
    DpJ2eeDisableRestart
    DpModState: buffer in state MBUF_PREPARED
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIModState: change state to SHUTDOWN
    DpModState: change server state from STARTING to SHUTDOWN
    Switch off Shared memory profiling
    ShmProtect( 57, 3 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RW
    ShmProtect( 57, 1 )
    ShmProtect(SHM_PROFILE, SHM_PROT_RD
    DpWakeUpWps: wake up all wp's
    Stop work processes
    Stop gateway
    killing process (1860) (SOFT_KILL)
    Terminate gui connections
    wait for end of work processes
    wait for end of gateway
    [DpProcDied] Process lives  (PID:1860  HANDLE:1448)
    waiting for termination of gateway ...
    NiWait: sleep (1000ms) ...
    NiISelect: timeout 1000ms
    NiISelect: maximum fd=1477
    NiISelect: read-mask is NULL
    NiISelect: write-mask is NULL
    Wed Apr 02 17:23:36 2008
    NiISelect: TIMEOUT occured (1000ms)
    [DpProcDied] Process died  (PID:1860  HANDLE:1448)
    DpStartStopMsg: send stop message (myname is >HOSTNAME_SID_01                      <)
    NiIMyHostName: hostname = 'HOSTNAME'
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
    DpConvertRequest: net size = 189 bytes
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
    MsINiWrite: sent 562 bytes
    send msg (len 110+452) to name                    -, type 4, key -
    DpStartStopMsg: stop msg sent
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=274
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 274 bytes
    MSG received, len 110+164, flag 1, from MSG_SERVER          , typ 0, key -
    DpHalt: received 164 bytes from message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIRead: read for hdl 2 timed out (0ms)
    DpHalt: no more messages from the message server
    DpHalt: send keepalive to synchronize with the message server
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
    MsINiWrite: sent 114 bytes
    send msg (len 110+4) to name           MSG_SERVER, type 0, key -
    MsSndName: MS_NOOP ok
    Send 4 bytes to MSG_SERVER
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    NiIPeek: peek successful for hdl 2 (r)
    NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
    NiBufIIn: NIBUF len=114
    NiBufIIn: packet complete for hdl 2
    NiBufReceive starting
    MsINiRead: received 114 bytes
    MSG received, len 110+4, flag 3, from MSG_SERVER          , typ 0, key -
    Received 4 bytes from MSG_SERVER                             
    Received opcode MS_NOOP from msg_server, reply MSOP_OK
    MsOpReceive: ok
    MsSendKeepalive : keepalive sent to message server
    NiIRead: hdl 2 recv would block (errno=EAGAIN)
    Wed Apr 02 17:23:37 2008
    NiIPeek: peek for hdl 2 timed out (r; 1000ms)
    NiIRead: read for hdl 2 timed out (1000ms)
    DpHalt: no more messages from the message server
    DpHalt: sync with message server o.k.
    detach from message server
    ***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   12213]
    NiBufSend starting
    NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
    MsINiWrite: sent 110 bytes
    MsIDetach: send logout to msg_server
    MsIDetach: call exit function
    DpMsShutdownHook called
    NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
    SiSelNSet: set events of sock 1356 to: ---
    NiBufISelRemove: remove hdl 2 from set0
    SiSelNRemove: removed sock 1356 (pos=2)
    SiSelNRemove: removed sock 1356
    NiSelIRemove: removed hdl 2
    MBUF state OFF
    AdGetSelfIdentRecord: >                                                                           <
    AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
    blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
    LOCK WP ca_blk 1
    make DISP owner of wp_ca_blk 1
    DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
    MBUF component DOWN
    NiICloseHandle: shutdown and close hdl 2 / sock 1356
    NiBufIClose: clear extension for hdl 2
    MsIDetach: detach MS-system
    cleanup EM
    EsCleanup ....
    EmCleanup() -> 0
    Es2Cleanup: Cleanup ES2
    ***LOG Q05=> DpHalt, DPStop ( 5348) [dpxxdisp.c   10461]
    Good Bye .....
    Please help me in resolving this issue
    Thanks,
    Vadi

    Hi Suhas,
    Have checked the hostname and it is correct.
    I am getting the below output When i run r3trans -x
    This is r3trans version 6.14 (release 700 - 04.03.08 - 16:43:00).
    r3trans finished (0000).
    I could see the below error message in dev_W21
    ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'sid_shd' setuser 'sid_shd']
    C  sloledb.cpp [ExecuteAndFlush,line 6470]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'cdu_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
    C  Procname: [ExecuteAndFlush - no proc]
    C  setuser 'cdu_shd' failed -- connect terminated
    C  failed to establish conn. 0
    Thanks,
    Vadi

  • Error during the upgrade phase "start_shdi_first"

    Hello,
    We are having issue with upgrading r/3 4.7 enterprise extension set to ECC 6.0
    Here the error message goes....
    starting system failed rc=0
    to analyse the error during start of shadow instance
    view files 'Startsfi.log' and 'devtrace.log'
    in directory usr\..put
    repeat phase until shadow instance is started
    and u can logon instance no '01'"
    We have changed the DDIC password during upgrade.after that we ran the initphase to update the password.
    I think sapup is referring the old password which was entered initially during the upgrade and we dont remember the old password also.
    Appreciate your response
    Startsfi.log
    1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080218175653")
    2 ETQ366 Connect variables are set for shadow instance access
    4 ETQ399 System-nr = '01', GwService = 'sapgw01'
    4 ETQ399 Environment variables:
    4 ETQ399   dbs_mss_schema=de4
    4 ETQ399   auth_shadow_upgrade=1
    4 ETQ399 Set environment for shadow connect:
    4 ETQ399 ENV: dbs_mss_schema=de4
    4 ETQ399 ENV: auth_shadow_upgrade=1
    4 ETQ399 Set RFC variables for shadow connect:
    4 ETQ399 System-nr = '01', GwService = 'sapgw01'
    4 ETQ399 Set tool parameters for shadow connect:
    4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
    4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    4 ETQ399   default TPPARAM: SHADOW.TPP
    4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
    4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWITCH"
    4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
    4 ETQ383 translates to path "exe"
    4 ETQ383 translates to path "exe"
    2 ETQ399 Starting shadow instance
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2 ETQ353 Starting system
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2 ETQ370 starting test RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
    4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
    4 ETQ232 RFC Login succeeded
    2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
    4 ETQ239 Logging off from SAP system
    2WETQ372 test RFC failed, rc="-3"
    2EETQ399 Starting shadow instance failed
    2EETQ399 Test RFC failed finally
    2EETQ399 Dialogue: ERROR
    2EETQ399 Starting system failed, rc=0
    DEVTRACE:
    trc file: "dev_disp", trc level: 1, release: "700"
    sysno      01
    sid        DE4
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    111
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        2272
    Mon Feb 18 16:08:40 2008
    kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
    length of sys_adm_ext is 364 bytes
    SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (01 2272) [dpxxdisp.c   1239]
         shared lib "dw_xml.dll" version 111 successfully loaded
         shared lib "dw_xtc.dll" version 111 successfully loaded
         shared lib "dw_stl.dll" version 111 successfully loaded
         shared lib "dw_gui.dll" version 111 successfully loaded
         shared lib "dw_mdm.dll" version 111 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    Mon Feb 18 16:08:52 2008
    WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0065.qqq.nxst) took 12 seconds
    Mon Feb 18 16:09:10 2008
    WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
    ***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  5361]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    DpIPCInit2: start server >MTW02SDEC01_DE4_01                      <
    DpShMCreate: sizeof(wp_adm)          19976     (908)
    DpShMCreate: sizeof(tm_adm)          3605136     (17936)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1296)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 065C0040, size: 4241064)
    DpShMCreate: allocated sys_adm at 065C0040
    DpShMCreate: allocated wp_adm at 065C1B30
    DpShMCreate: allocated tm_adm_list at 065C6938
    DpShMCreate: allocated tm_adm at 065C6968
    DpShMCreate: allocated wp_ca_adm at 06936BF8
    DpShMCreate: allocated appc_ca_adm at 0693B248
    DpShMCreate: allocated comm_adm at 0693C9B8
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 069BD868
    DpShMCreate: allocated gw_adm at 069BD8A8
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 069BD8D8
    DpShMCreate: allocated wall_adm at 069BD8E0
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> InitFreeList
    <ES> block size is 1024 kByte.
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 2046 blocks reserved for free list.
    ES initialized.
    WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c   12437]
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG Q0K=> DpMsAttach, mscon ( MTW02SDEC01) [dpxxdisp.c   11753]
    DpStartStopMsg: send start message (myname is >MTW02SDEC01_DE4_01                      <)
    DpStartStopMsg: start msg sent
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpMsgAdmin: Set release to 7000, patchlevel 0
    MBUF state PREPARED
    MBUF component UP
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
    DpMsgAdmin: Set patchno for this platform to 111
    Release check o.K.
    Mon Feb 18 16:09:13 2008
    MBUF state ACTIVE
    DpModState: change server state from STARTING to ACTIVE
    trc file: "dev_ms", trc level: 1, release: "700"
    [Thr 4724] Mon Feb 18 16:08:40 2008
    [Thr 4724] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    110
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        5420
    [Thr 4724] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5420) [msxxserv.c   1824]
    [Thr 4724] MsInitAclInfo: acl file D:\usr\sap\put\DE4\SYS\global\ms_acl_info.DAT not found, unrestricted access
    [Thr 4724] MsGetOwnIpAddr: my host addresses are :
    [Thr 4724]   1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
    [Thr 4724]   2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
    [Thr 4724] MsHttpInit: full qualified hostname = MTW02SDEC01.mindsap.com
    [Thr 4724] HTTP logging is switch off
    [Thr 4724] MsHttpOwnDomain: own domain[1] = mindsap.com
    [Thr 4724] ms/icf_info_server : deleted
    [Thr 4724] *** I listen to port sapmsSHDDE4 (3601) ***
    [Thr 4724] CUSTOMER KEY: >J1537289841<
    trc file: "dev_rd", trc level: 1, release: "700"
    Mon Feb 18 16:09:10 2008
    ***LOG S00=> GwInitReader, gateway started ( 2344) [gwxxrd.c     1694]
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    110
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        2344
    gateway runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
    gw/local_addr : 0.0.0.0
    CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
    Bind service sapgw01 (socket) to port 3301
    GwPrintMyHostAddr: my host addresses are :
      1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
      2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
    DpSysAdmExtCreate: ABAP is active
    DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
    DpShMCreate: sizeof(wp_adm)          19976     (908)
    DpShMCreate: sizeof(tm_adm)          3605136     (17936)
    DpShMCreate: sizeof(wp_ca_adm)          18000     (60)
    DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
    DpShMCreate: sizeof(comm_adm)          528048     (1048)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm)          0     (96)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm)          0     (72)
    DpShMCreate: sizeof(vmc_adm)          0     (1296)
    DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
    DpShMCreate: sizeof(gw_adm)     48
    DpShMCreate: SHM_DP_ADM_KEY          (addr: 06110040, size: 4241064)
    DpShMCreate: allocated sys_adm at 06110040
    DpShMCreate: allocated wp_adm at 06111B30
    DpShMCreate: allocated tm_adm_list at 06116938
    DpShMCreate: allocated tm_adm at 06116968
    DpShMCreate: allocated appc_ca_adm at 0648B248
    DpShMCreate: allocated comm_adm at 0648C9B8
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 0650D868
    DpShMCreate: allocated gw_adm at 0650D8A8
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated ca_info at 0650D8D8
    MtxInit: -2 0 0
    Mon Feb 18 16:09:14 2008
    GwDpInit: attached to gw_adm at 0650D8A8
    Thanks,
    Vadi

    Dear All,
    The issue has been resolved by changing the DDIC password to what it was when we have started the upgrade.The password was "welcome" when we have started with upgrade after that it has been changed to
    "basis05" during upgrade.we changed it back to welcome and it started working fine.
    Here it took long time to find out what was the password when we have starte upgrade.Resetting to standard ddic password also ddint help out in our case.
    Thanks for all your replies.

  • Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16

    Hello,
    I've encountered issue during installation of SP1 to SQL Server 2012. After upgrade I'm getting this error in Event Log:
    Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' encountered error 537, state 3, severity 16. This is a serious error condition which might interfere with regular operation and the database will be taken offline.
    If the error happened during upgrade of the 'master' database, it will prevent the entire SQL Server instance from starting. Examine the previous errorlog entries for errors, take the appropriate corrective actions and re-start the database so that the script
    upgrade steps run to completion.
    Can someone point me direction how I can fix it? This is a production server and currently only way to make it working is to use T902 flag in SQL Server startup params. I've found some suggestions to check Data path if it exists but it does so this is not
    the issue here. Any ideas?
    I've found also here
    http://www.sqlservercentral.com/Forums/Topic1377073-1550-1.aspx#bm1378279
    suggestions for similar issue with SQL Server 2008 which that I should do:
    Via ssms:
    From msdb:
    Delete:
    dc_admin role
    Dc_operator role
    Dc_proxy role
    UlitityCMRReader role
    UtilityIMRReader role
    UtilityIMRWriter role
    but for not I didn't tried it yet. This is standalone SQL Server instance.
    Any help really appreciated.
    Regards

    Script returns the same error.
    System databases:
    1    1    760    -1    10    1048578    0    1    master        C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\master.mdf
    2    0    12768    -1    10    1048642    0    1    mastlog        C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
    1    1    1024    -1    10    1048578    0    2    tempdev        C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\tempdb.mdf
    2    0    64    -1    10    1048642    0    2    templog        C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\templog.ldf
    1    1    288    -1    128    2    0    3    modeldev    C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\model.mdf
    2    0    4464    -1    10    1048642    0    3    modellog    C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\modellog.ldf
    1    1    28936    -1    10    1048578    0    4    MSDBData    C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBData.mdf
    2    0    3352    268435456    10    1048642    0    4    MSDBLog    C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA\MSDBLog.ldf
    are all in place where path shows.
    Before sending my message I've searched update script for "FROM master.sys.master_files" and I found script which you are showing me. I've made some digging and when I runned:
           SELECT physical_name
           FROM master.sys.master_files
           WHERE (name = N'master')
    it returned also path to one my customers database name which has filename set correctly but it's Logical DB name is master and mastlog. I'm running shared hosting company and I allow my customers to restore their DBs from .bak files but I have no idea why
    this customers logical name is set to master and mastlog. Probably when I change this names update script will work as it should. On the other hand in my opinion there should be some kind of fail safe mechanism for situations like this one.
    EDIT: After changing logical name for DB and log for mentioned DB your script runned fine so probably now when I remove T902 flag and restart my SQL Server update will run correctly. Big thanks for resolving this issue.

  • I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. How can I fix it?

    I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. It looked in Mail, which had 5 email accounts set up in it, and for some reason picked the only one that I no longer use because it is for a school that I no longer attend. How can I fix it so that it syncs with the correct email account for notes and calendar? There don't seem to be any settings available other than to check if you want to use the basic features. It also said during the set up that it was setting up 'find my mac' but if I look on the iCloud website there is nothing showing there for finding my mac.
    At this point I feel like I wasted my money paying for this supposed upgrade. I got nothing for it but frustration. It even automatically set my security settings to allow only downloads from the Mac store so the first time I went to download something I had to stop what I was doing and go correct settings first. I feel like there should be a security setting to block downloads from the Mac store so I don't accidentally end up clicking the wrong thing and being charged.

    iCloud isn't syncing them on your phone.  You simply added the email account to your phone and enabled calendar and notes syncing with the email provider, and the calendar and notes appear in the calendar and notes apps on your phone.  You can do this with Gmail, Yahoo and other IMAP account.  iCloud email is just another IMAP account, but syncs notes with Apple's iCloud server just as Gmail syncs notes and calendars with Google's server.
    iCloud didnt' set up a non-iCloud account on your Mac.  When you check Mail in System Preferences>iCloud, it only creates an iCloud email account.  You can also add other email accounts to your Mac by going to System Preferences>Mail,Contacts,Calendars and clicking on the "+" sign on the bottom of the left sidebar.  If you added these other email accounts to your Mac before you upgraded to Mountain Lion, these were simply maintained on your Mac after you upgraded.

  • When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi.  It gives me a message unable to search for WiFi.  Before the upgrade to Lion it worked fine.  What gives?

    When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi.  It gives me a message unable to search for WiFi.  Before the upgrade to Lion it worked fine.  What gives?

    Could there be a setting I need to adjust in the iPad2?  When I try to turn on WiFi and enter the name of the WiFi that I have established, including the security type and the password, I get the message "Could not scan for wireless networks."  Is there a setting in iCloud or other location that needs to be changed?

  • Does Anybody know how to keep the license files and Certificates in ISE-3315 During the upgrade.

    Hi,
    I have two ISE-3315 Appliances in production network.
    I need someone's help to explain, how to make the Secondary node as the primary admin note to reset-config.
    And then I would like to know how to keep the license files and Certificate during the Upgrade.
    Please help me to answer my questions.
    Thanks
    CSCO11872447

    The Cisco Identity Services Engine (ISE) provides distributed  deployment of runtime services with centralized configuration and  management. Multiple nodes can be deployed together in a distributed  fashion to support failover.
    If you register a  secondary Monitoring ISE node, it is recommended that you first back up  the primary Monitoring ISE node and then restore the data to the new  secondary Monitoring ISE node. This ensures that the history of the  primary Monitoring ISE node is in sync with the new secondary node as  new changes are replicated.
    Please  Check the below configuration guide for Secondary ISE- Nodes.
    http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.pdf

  • I was trying to upgrade to OSX 10.9 but during the upgrade when the download got to 2.6gb /5.29gb message "an error occurred" appeared and since then i have been un able to upgrade, what can i do.

    I was trying to upgrade to OSX 10.9 but during the upgrade when the download got to 2.6gb /5.29gb message "an error occurred" appeared and since then i have been un able to upgrade, what can i do.

    If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there. 
    searching the internet i found a link to upgrtade to 10.7
    The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
    As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
    Regards.

  • Database usuage during the day

    Hello,
    is there a way I can find out the database usuage during the day. i.e when the database is heavily used ( during a certain time) and when the load is low on the database. some value or graph like thing...
    Thanks

    What's the Oracle version?
    If 10g and above, configure and start dbconsole, you can run AWR report if needed.
    For earlier version, schedule taking statspack report snapshot during peak hours.

  • After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

    After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
    Tried to run firefox.exe -P but receive error message:
    XML Parsing error: undefined entity
    Location: chrome://mozapps/content/profile/profileSelection.xul
    Line number 18, Column 1:
    <dialog
    ^
    Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

    Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
    Thank you very much again.
    Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
    In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

  • Since I upgraded to iTunes 11.01 the "Smart" playlists feature no longer works.  I can CREATE the list but, the songs that I have played don't accumulate in the list.  I haven't changed the steps that worked for me previous to the upgrade.  I have no idea

    Since I upgraded to iTunes 11.01 the "Smart" playlists feature no longer works.
    I can CREATE the list but, the songs that I have played don't accumulate in the list.
    I haven't changed the steps that worked for me previous to the upgrade.
    I have no idea how to fix this and can't find mention of anyone else having a similar problem.
    Any suggestions?

    Click on a station and drag to the left. The playlists sidebar will open up. Drop on the playlist you want to add to.
    tt2

  • Automatic goods issue for outbound delivery, during the transfer order confirmation

    Hello,
    Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
    Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
    Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
    Thanks in advance.

    Hi Iiya
    Check the below setting, might be helpful

  • I recently tried to update my iPhone 3 software via my mothers Mac book comp - during the upgrade I lost all my music and calendar dates and now the iTunes on my phone has my mothers iTunes detail - how do I get all my info back on the phone?

    I recently tried to update my iPhone 3 software via my mothers Mac book comp - during the upgrade I lost all my music and calendar dates and now the iTunes on my phone has my mothers iTunes detail - how do I get all my info back on the phone?

    Restore it using the computer you normally sync with.

  • Good afternoon. I have a problem. During the upgrade Iphone 4 c IOS 4.3.5 to 5.0.1, I pulled the cord. Now I can not restore the Iphone. Just lost imei, Wi-Fi, and phone became unusable. What should I do?

    Good afternoon. I have a problem. During the upgrade Iphone 4 c IOS 4.3.5 to 5.0.1, I pulled the cord. Now I can not restore theIphone. Just lost imei, Wi-Fi, and phone became unusable. What should I do?

    See if you can force the phone into recovery mode:
    Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • I have a CC subscription for Lightroom and purchased the upgrade for my standalone Ver. 5 to Ver. 6, but I can't install the standalone upgrade. Anyone have any idea how to do it?

    I have a CC subscription for Lightroom and purchased the upgrade for my standalone Ver. 5 to Ver. 6, but I can't install the standalone upgrade. Anyone have any idea how to do it?

    sjrozas wrote:
    I'm only trying out the subscription. Thanks for being so concerned about my finances.
    Sent from my mobile.
    Your initial post indicated that you had a CC subscription. That seems to imply that you have subscribed. If you hadn't already purchased Lightroom 6 I would suggest that you wait until you decide about CC. You really don't need both because the Lightroom program is precisely the same except for Lightroom 6 without the creative cloud has no Lightroom mobile capabilities. But I was only trying to help.

Maybe you are looking for

  • How can I get all prctr ( profit centers ) ?

    While creating function module, I have created import parameter as 'ZIMPORT_PRCTR' for Profit Center ( cepc-prctr ) in my zfunction module . It takes( imports ) input of multiple values Profit Center. Next what I need to do is, if end user enters mul

  • Is there a way to read data off drive, not relying on file structure somehow?

    That might be the wrong question. But it kind of gets at what I'm after. I have a DVD disk which was written by my TV DVD machine. While it was recording onto the disk, it ran out of space. When this happens, when I put the disk into my computer, my

  • Issue with program - SF_XSF_DEMO_MAIL

    Hi Gurus, I did not get any answer for the previous post on the same topic,but with different subject. Hence posting it again with a straight forward question. I am tryng to incorporate the functionality explained in the SAP standard and demo program

  • Reg: PO item History

    Hi, Could you tell me in which table Purchase Order Line items change history will be available.. Regards Reddy

  • Monitor replies(SMTP) in R3

    Hi, experts, here is the situation: the emails are sent out from the IBX system (smtp ibx.r3.sap.corp) with questionnaires as attachments. The receivers will get a html page with questionnaire. After a receiver fill out the questionnaire, he will pre