SPDIF In not working, no SPDIF tab in Entertainment mode, X-FI Extreme PCI

Hi All,
I am trying toget the SPDIF input working with my HDTV as the source of the audio input. I have looked everywhere in these forums and there are many references to the SPDIF tab in Entertainment mode, but this does not exist in my software. I have done the software auto update and it tells me I have the latest software and drivers. How do I get the SPDIF input to work. I would think it should be as easy as turning on this input, but I cannot figure out how. HELP!!

Well basically it is possible, and I've found this out. Apparently Dell released a driver or something that allows it to work, but then only if you install a 3rd party modified xp version of the creative suite. I don't remember where I found it, but it was through google... Using some term including x-fi, dts, and vista.... Can't seem to find it now. Anyway, it had a download for the whole creative suite that was modified from the xp version for Vista, however it was buggy as hell, caused driver issues and blue screens, and ended up causing me to have to reinstall Vista altogether again. In other words, it's possible, but I don't recommend it until it's officially supported... Don't know when this will be yet... *crosses fingers*
Luckily I've got a dual OS system with XP too, and I switch to that when I want to use my Xbox 360... However due to Microsoft also being terrible in that department... I now get entertainment off of its 3 red lights... (For those of you who don't know, 3 red lights = hardware error. Sending into microsoft for repair typically is a 2 month process... I'm still waiting on my prepaid shipping box to arri've and it's been 4 days... Will be a similar wait to get it to them, 4-6 weeks for them to actually repair, and another week or so to get it all shipped back). Although even when the console worked, my dsl modem sometimes cut out when playing on Xbox li've and dropped signals, reported errors, etc.
What is with the companies producing technology nowadays? I just want to play Gears in 5. on Xbox li've... *cries*Message Edited by Supercoolyo on 07-22-20070:54 AM

Similar Messages

I downloaded the S5 upgrade a week ago. Now, may notification LED will not work when phone is in 'mute' mode. It always did before. How do I fix this?

I downloaded the S5 upgrade a week ago. Now, may notification LED will not work when phone is in 'mute' mode. It always did before. How do I fix this?

same thing happened to my S5. We're beyond frustrated.

HT201412 my device was updated and now is not working anymore, it is in recovery mode all the time

my device was updated and now is not working anymore, it is in recovery mode all the time.
what can i do???

Delete the shortcut you have at the moment and then create a new one as follows:<br><br>
#Use Windows Explorer to navigate to C:\Program Files\Mozilla Firefox.<br><br>
#Right click '''firefox.exe''' and choose '''Send To''', then '''Desktop (Create shortcut)'''<br>
Bear in mind that you're using an BETA version of Firefox and you're likely to encounter similar issues in the future.

SubVI with while loop + event structure not working in multi tab VI

Hello Everyone,
I am developing an interface for the control of a prober using Labview 2012, and I am stuck with some issue.
To start with I provide you with a simplified version of my control interface VI, and with the sub-VI used to build and manage the wafer maps.
The VI consists of several tabs: Prober Initialization, Wafer Handling, Wafer Map, Status, Error.
The sub-VI can:
1/ initialize the grid to display the map (sub VI Init Grid not provided here)
2/ import XY coordinates from a txt file (sub VI Wafer Map Import)
3/ display the coordinates and index of the die below the cursor
4/ and when a die position is double clicked, and the boolean "Edit Wafer Map" is true, then the user can change the state (color) of the die between On-wafer die and Selected Die
My issue:
If I use the sub-VI by itself, it works fine. However when I use it as a sub-VI in the tab "Wafer Map", the map does not build up and I can no further use the embedded functionalities in the sub-VI.
I suspect the while loop + event structure of the sub-VI to be the bottleneck here.
However I don't know which way to go, that's why I'd be glad to have some advice and help here.
Thank you.
Florian
Solved!
Go to Solution.
Attachments:
Control Interface.zip ‏61 KB

Hi NitzZ,
Thank you for your reply.
I tried to save the VIs in LV10, please tell me if you can open them now.
Inside he event structure there is quite some code, and since I don't want to make the main vi too bulky, I would like to keep it as a sub-VI.
As you can see from the sub-VI, the event structure is used for extracting cursor position and tracking the double click action. These events are linked, through a property node, to the image "Wafer Map" which is passed to the main vi through connector pane.
All values are passed this way as well (through connector pane). Is there another way?
Maybe "refnum", but I don't really understand how to use them...
If I use the event structure in the main vi, the wafer map is still not working. I tried it earlier.
To implement the multi tab front panel, I used a tab control, and a for loop + case structure. For each element of the case structure, there is a corresponding action.
For the case where I put the code (element=2) for Wafer Map, I also control the execution of the code with a case structure activated by the button "REFRESH". Otherwise I end up with a freezing of the panel right after the start.
I hope these comments help you understand better.
Regards,
Florian
Attachments:
Control Interface.zip ‏104 KB

Safari 1.3.2 shortcut not working for blank tabs - normal?

Just got my powerbook back from Apple with an "updated" OS X.3.9 and Safari 1.3.2. Trying things out before I zero the drive and reinstall everything back the way I had it (OS x.3.8 and Safari 1.2)
Trouble is the keyboard shortcut for cycling through tabs seems to be broken. I used to use CMD-SHIFT-Arrow Key to move left or right through tabs. Now it won't work except on tabs that already have pages loaded. If I land on a blank tab (like one of the dozen I open in advance as habit) it just dies and then I have to use the trackpad to select a new tab.
So, is that a new "feature" of Safari 1.3.2 or is mine broken? I don't like it.

Thanks for the info, Tom.
I must admit great disappointment at this "improvement". CMD-Tab-Arrows worked 100% of the time in version 1.2. Now in 1.3.2 it doesn't.
For me, it makes infinitely more sense to leave my fingers on the arrows to cycle tabs because I'm already using them alone and with other modifier keys for scrolling up and down and left and right anyway. I'm less likely to mistake the arrows for other keys (remember I'm using a highly compact keyboard).
You're right this weird bracket key [ ] shortcut works even in blank tabs. However, it's definitely 1 strike against keeping the OS and Safari at the "updated" versions. Sigh.

I cannot open a new tab - when I restart firefox (or my computer), ctrl T does not work, and the "+" tab next to the single tab on my browser window does NOT open a second tab

Firefox3.6.18, running on WinXP (all the Microsoft patches), opens with a single tab. Clicking the Add Tab "+" or pressing CTRL T does not open a new tab, although I can open a new window. Also, when exiting from Firefox, my tab location is not saved.

Please disable or uninstall the Ask toolbar extension to solve your problem. It has a known incompatibility with Firefox. See [[Uninstalling add-ons]].

Field selection not working in Calculate tab

Hi, I'm trying to use a simple "Sum" calculation and it is suddenly not working. I can't select individual fields. "Select All" will put a check mark in every field. Trying to pick the four fields I need does not. I used this feature successfully in the past but cannot understand why it won't work now. Please help! Thanks in advance.

Use the space-bar or click a bit off to the center of the check-box to toggle it. It's a known bug of Acrobat (I answered this same question like 3 times in the last two days alone...).

MessageFileUpload not working under Sub Tabs

Hi All,
I have Created one MessageFileUpload under SubTab for uploading a file to server on button click. It is not working first time but on second time it is working perfectly.
Please help me out of this problem.
Thanks
Sahil

Dear Sahil,
There must be some issue with your code..
can you share the logic that you wrote, if any.
Regards,
Sowjanya

CMSS3D is not working !!!! after modding teh shell32.dll PLEASE HELP

? hello there,
i have a question...why does cmss3d uses the shell32.dll in system32?
cause i wanted to edit my shell32 to have a new icons, etc...
so, when i change the shell32, even i change onnly one icon, the cmss3d is not working anymore...
as sonest i change the shell32 back to its original, even without restart, the cmss3d is working again like it should!!
so how can i fix this...what is creative even doing with this file?
PLEASE HELP me, i need to do some modification to shell32.dll...
but i also need cmss3d to work...can maybe someone can tell me what the cmss3d is loking for in the shell32.dll so i can make a workaround or something...cause this is related to all creative x-fi users..!!
greetz, BGViruS

H? ha, lets say it like that..
i talked with people from MS..and they said it shouldnt happen..
Creative is the only soundcard maker that has a prob with that...
if you guys would make your software better than betas it wouldnt happen..
anyway i asked you guys something that still no one answered..
question: for what reason does the cmss3d modul uses the shell32 ?
thats what i wanted to know so i can change it.
no other software like from realtek and so on hass no prob with that..and chancing a pic in the shell32 isnt coruppting system files, ask MS for yourself...
so, please answer my question, why is cmss3d using the shell32 and in what way...
thats all i want to know. after that you can close this threat...
if you are really a serious manufacter then help me insted of talking bull**bleep**
greetz

Adaptiva Software Distribution not working with Cisco APs in Local Mode

A worldwide customer would like to use a new Software distribution system called Adaptiva to replace SCCM within Windows environment. As far as I understand, Adaptiva is designed to work like a snowball system. A single PC at a remote side can be "infected" with new Software and will distribute the package to other PCs within the same IP-subnet, saving WAN bandwidth.
First tests are showing that it is working well with Cisco WLAN solution as long as we are using Flexconnect WLAN APs.
Customer locations with Local WLAN AP design create problems for this new software distribution method.
The WLAN-PCs can be reached from outside, but the establishment of the Client/Server-model between the WLAN Clients is not working. The Port used by this software for communication between clients in each WLAN subnet is UDP Port 34329.
Our WLCs are running at 7.4.130.0. The problem is appearing independently of AP Multicast settings or Broadcast Forwarding. Enabling Broadcast forwarding without Reboot did not improve the situation.
Global Multicast Mode and IGMP Snooping are also of no influence.
P2P Blocking Action is "Disabled" within the WLAN setup.
Who has any idea what might cause this communication problem between WLAN clients in Local Mode of APs ?
Thank You for answers
Wini

I can think of two solutions. You could 1: turn the "auto-lock" to never, so that your phone never sleeps. Or, you could 2: jailbreak your iPhone and install "insomnia". I wish we had the Cisco Mobile app. I usually use wifi/insomnia and turn data off at work since we have wireless pretty much everywhere...
Sent from Cisco Technical Support iPad App

MY ONE OF THE RIGHT INBUILT SPEAKER IS NOT WORKING IN HP PAVILION DV4 ENTERTAINMENT PC

i brought this hp note book from U.S .NOW,MY ONE OF MY RIGHT INBUILT SPEAKER IS NOT WORKING..SUGGEST ANY SOLUTION TO THIS ..NOW I AM IN INDIA ,OFCOURSE I AM AN INDIAN..SUGGESTS HP STORE IN ANDHRA PRADESH

Contact HP Total Care in Australia.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Auto focus in Safari Yosemite does not work on new tab.

Creating a new tab in Safari does not auto focus the address bar. I need to Cmd-L to activate the address bar. This is annoying because I usually create a new tab to enter a search. Is this a bug or working as intended?

OK! I've found the error by myself. The XML file I am trying to update is not schema valid. Infact I've registered the schema with this call:
begin
dbms_xmlschema.registerSchema(
'PurchaseOrder.xsd',
getdocument('PurchaseOrder.xsd'),
TRUE,TRUE,FALSE,TRUE
end;
So the first three lines of the XML file must be:
<PurchaseOrder
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="PurchaseOrder.xsd">
and not
<PurchaseOrder
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="HTTP://localhost/sys/schemas/REF5/PurchaseOrder.xsd">
I think it is better not to register the schema with relative URL...
Bye!

T431s Middle click not working (open new tabs in browser)

Hi, I have a brand new t431s here, and I can not get the track point working as expected (and as on all previouse thinkpads since the i-series):
expected behaviour:
middle-click on link -> new tab
middle click&hold and trackpoint-> scrolling
I am not able to find the setting which enable this behaviour.
Any help would be appreciated.
cheers
schmaud

What OS?

Date Format is not Working in Cross tab Crystal report 2008

Hi,
I have developed an application ASP.Net c#
in Framework 3.5 with crystal report 2008 with service pack 5.
in my crystal i used cross tab to show the grid records. one of the data having the data type as date time after launching the report, when i export the report with option "export to excel (data only)" and check the format of the date value in excel it show the general string
if i place that data in any other location other than cross tab then it reflects the format what i give in report design. but when the control is in cross tab
its not effect
how to solve this!

And tweeted
- Ludek
Senior Support Engineer
AGS Product Support, Global Support Center Canada
Follow us on Twitter

New themes in APEX 4 not working with JQuery tabs

Hi,
JQuery tabs only showed on themes 13, 15, 18, 20.
When I swicth to other themes, its not displayed like tabs

Hi,
you can simplify the the usage of jQuery tabs in APEX 4.0. You don't have to create hard coded JavaScript code for each page where you want to use them. Just use the new "Sub Region" feature and a corresponding region template.
Here is what you have to do:
1) Create a new template of type "Region" (create one from scratch)
a) Name: jQuery Tabs
b) Template Class: Custom 1
c) Template:
<div id="#REGION_STATIC_ID#" #REGION_ATTRIBUTES#>
#BODY##SUB_REGION_HEADERS##SUB_REGIONS#
</div>
<link rel="stylesheet" href="#IMAGE_PREFIX#libraries/jquery-ui/1.8/themes/base/jquery.ui.tabs.css" type="text/css" />
<script src="#IMAGE_PREFIX#libraries/jquery-ui/1.8/ui/minified/jquery.ui.tabs.min.js" type="text/javascript"></script>
<script type="text/javascript">
apex.jQuery(function() {
apex.jQuery("##REGION_STATIC_ID#").tabs();
</script>d) Sub Regions - Header Template:
<ul>#ENTRIES#</ul>e) Sub Regions - Header Entry Template:
<li><a href="##REGION_STATIC_ID#-tab-#SUB_REGION_ID#">#SUB_REGION_TITLE#</a></li>f) Sub Regions - Template:
<div id="#REGION_STATIC_ID#-tab-#SUB_REGION_ID#">#SUB_REGION#</div>2) On the page where you want to have jQuery tabs, add a new "HTML" region which acts as the container for the "tabs". Set the region template to your new "jQuery tabs" template.
3) Create as many sub regions (that are the actual tabs). It's just important that you set the "Parent Region" to your container region you just created before. As region template I would pick "No Template" or any other template you want to have.
That's it. As you can see now from the region structure it's very obvious for any developer developer what regions are part of the jQuery tabs.
Regards
Patrick

SPDIF In not working, no SPDIF tab in Entertainment mode, X-FI Extreme PCI

Similar Messages

Maybe you are looking for