Spdif out on windvd = no sound ! X

was trying to whatch a dvd the other night after burning it only to fin i get no sound !
windvd is set as per the instructions to pass the siganl to my soundcard (x fi plat) and the sound cards set to decode the signal but i get nothing at all, th eonly way i get sound is if i set windvd to analogue aka plain old stereo stanger still is if i play the vobs for the dvd of my hdd the sound works fine !

Not sure why your running into a prob. I just tested WinDVD here and am getting spdif out to SC just fine. Only issue I have is that allowing WinDVD to do the audio on a DTS disc the volume is louder than if spdif and let x-fi decode it. Any chance you have the decoder set backward for the card, ie set to Dolby bitstream out instead of built-in decoder? I know you said you had it right & sounds like you know what your doing but thats the only thing I can think of. Which version of WinDVD are you using?

Similar Messages

  • No 5.1 sound no SPDIF out

    I have porblems with sound card (KT3ARU).
    I have no no 5.1 ouput sound no coaxial SPDIF out my hifi shows only 2 channel sound
    I tried everything:
    - install latest software
    - setup software to 5.1 mode and select Coaxial SPDIF out
    - check my hifi - it works with DVD
    Thank's in advance!
     

    if it works with a dvd all is well
    try playing mp3 with your power or win dvd software
    and adjusting the settings
    the onboard only plays what its fed mp3 stereo and most games the same

  • Spdif out for Audigy (please help as soon as possib

    Plz i need help in this matter...i read all the related topics about it in this board but i still dont get it and still not working..
    I copied some movies (dvds) to my pc (on the hard disk)and i tried to play them from the pc using windvd software..i connect my soundcard from the spdif out to the coaxial input(digital in) in my onkyo receiver but still the sound not working.
    I selected the 'SPDIF' as the audio output method in my windvd software and i selected the 'SPDIF Pass-through' in my audigy 5.soundcard .
    Please could i know what to do so the spdif output work..i tried all the ways but couldn't know whats the problem..please waiting for the reply..
    Thanking you in advacnce.
    regards,
    shadi

    Download the freeware utility Renamer4Mac (VersionTracker or MacUpdate.)

  • Qosmio G30-102 Optical SPDIF out not working

    I have bought new Qosmio G30-102 and I am quite sure that SPDIF Optical Out connector is not working.
    I can't test it at the moment, but I had a couple of SPDIF sound cards and every one of them had a red light on all the time, which signalized that Optical SPDIF is supported.

    Hi,
    maybe I would first try a SPDIF device, if I were you, because I agree with the user before, it has definetively a SPDIF out.
    Greets

  • Help with spdif out

    i have a home theater system setup, goes from the spdif out on front of my A.2zs platinum card to the coax in on my receiver, and it worked great for about half an hour, then the music i was playing started to get a funny sound in intervals, like it was dropping out, fading in and out, could this be interference?
    Message Edited by Brando308 on <SPAN class=date_text>03-7-2005 <SPAN class=time_text>08:24 AM
    Message Edited by Brando308 on 03-7-2005 08:28 AM

    sorry, don't have dvd player installed, but, i downloaded AC3 trailers and still no succes.
    something to add, the MSI SOUND MANAGER that came with the driver also doesn't produce 5.1, i've selected digital output and 6 channel coax and when i turned the speaker test on, surround speakers didn't made any sound, only the 2 front speakers.
    what do u think about this ?

  • XBox 360/Audigy: SPDIF IN pass through to SPDIF OUT not working with 5.1

    Hi,
    I've a problem passing my digital dobly signal from my 360 over the Audigy soundblaster to my external decoder. I want to use digital SPDIF IN from the audigy?IO device to pass the signal directly without processing to the external decoder by using the SPDIF OUT.
    There is only one digital in at the decoder, so I need this combination if I want my PC and XBox to be connected both without a toslink switch.
    I activated the pass through and external decoder option in the audigy console application. I also disabled the DDL encoder. Additionally I set my Windows 7 speaker settings to use SPDIF OUT as standard device.
    This is working for every dolby digital signal?from a dvd which I play on my PC, but not for the XBox signal. The signal is not recognized as a 5. dolby digital signal, but as a 2.0 signal. So something must happen with the signal in the audigy. The XBox settings are correct, because when I connect the toslink cable directly to the decoder everything works fine.
    My drivers are the newest one (3.8)?from the support pack.
    I don't want to use the DDL option, because the latency is much to high to allow regular playing!
    Is there a possibility to pass the XBox signal through to my decoder by using the digital in and out of the audigy?
    Thanks in advance,
    Axel

    Hi I have the same probleme, exept that I have succesfuly pluged my home theater receiver and the 5.1 works. Just my subwoofer seems not to work properly. Like when I plug it into a digital dvd player it works very nicely. but when pluged into the sound card it seems that it dosnt have any signal for it.
    ANy clues??? I know i pluged everything finely I have tested the sound test for each speaker and sub to, from the receiver and from the creative software the sub seems to work but very quietly even if I cran the volume up on the sub or in the software , the sub dont work as it should.
    1 thing I remarqued is that the sub works occasionaly in some movies. When listening to the music it not working and I dont understand that.

  • X-FI Titanium + DDL Encoding + SPDIF Out Configuration on Windows 7 x64

    ?My setup - I have an X-FI Titanium running on Windows 7 x64. The optical out of the X-FI is connected to a splitter - one goes to my speakers (Logitech z-5500) and the other goes to my headphone amp (Astro Mixamp). I'm running the latest beta driver and daniel's last support pack, along with the latest DDL and DTS packages.
    When I enable DDL encoding in the creative panel, it says I have to set the default device to be Creative X-FI (Speakers). Why not SPDIF out? If I set SPDIF Out as the default device, I get no sound. If I reboot, I get a blue screen.
    If I set speakers as default, I get sound from both the speakers (if I connect analog) and optical out. I thought this configuration wasn't possible anymore on Vista/Windows 7?

    they dont want you to use spidf out because the console doesnt control it and doesn't give you any enhacments at all. either turn the software volume control to 0, or unplug them.

  • X-Fi XtremeMusic switch to SPDIF-Out

    Hi, i have a Sound Blaster X-Fi XtremeMusic SB0460 on a Windows 7 64Bit.
    I install the latest Driver and it works.
    After a reboot the i see only the SPDIF-Out and the soundcard doesnt work anymore.
    How can i fix it?

    Great, you made my day. Thanks for that reply.
    I did not know, where to start counting the pins from (there is no nor a 9 next to the pins on my board). Just used the one from the image you posted and: it works.
    BUT: When I play music / movies on my PC and have the analog output on AND the digital I can clearly hear, that the digital output has a delay (which leads to a great reverb effect). I tried to turn off all sound processing (EAX, CSS3d, Crystalizer) in the audio console but the delay is still there.
    Any idea, on how to get rid of that delay? Because it's bad seeing people move their lips asynchronously to their speaking.
    Thanks, path

  • Spdif out not working with latest drives on XFI

    /? I installed the newest drivers that were released recently. Driver version 6.0..347.
    Before I upgraded to these drivers my dolby digital was working fine.
    In powerdvd I have SPDIF/out selected. And the dolby digital light will not come on in the reciever. Anyone?
    else having this issue?
    SYSTEM SPECS: Antec P83 * Antec CP-850 * Intake two S-Flex SFF2E fans *
    Exhaust? two S-Flex SFF2E fan * Noctua NH-U2P SE366 cpu cooler * Asus P6T Deluxe *
    Bios version 605 * Core i7 920 @ 3.6ghz 20x 80bus * Mushkin 3x2GB 998679 @ 7-8-7-20 *
    Gigabyte 9800 GTX+ gig * PCIe SB X-Fi Titanium Fatality Pro * Pioneer SATA DVR-22DBK *
    Intel X25-M 60GB MLC SSD * Two Western Digital WD6400AAKS 640GB *
    ?Windows Vista 64 Ultimate SP2 not vlited
    Message Edited by galvin on 08-6-2009 05:08 [email protected]

    No one has this problem at all?
    I want to find out for sure if there is a fix before going back to the older drivers.
    If i do the test in the spdif out properties panel -> supported formats. When I do the dolby digital test I see the light come on in my receiver and hear sound just thru the front speakers. But when I use power DVD 9 ultra with the latest patch. I don't get the digital light on my receiver. I had this working with the previous drivers released earlier this year.
    Message Edited by galvin on 08-7-2009 0:54 [email protected]

  • M-Audio wont spdif out from new Itunes

    After upgrading to new itunes, itunes simply wont play any longer when sound is set to digital out in system prefs. As long as sound is set to internal speaker before opening itunes, it will play through internal spker. Interestingly, I can still get 5.1 out through the spdif of the Rev sound card using both VLC media player, and Apple DVD player though its unstable.
    Other recent changes are QT 7.1.3, and latest M-audio driver 1.4 I think (there are only two ever).
    I would like to revert back to my earlier versions of QT, and Itunes but I see the links for the reinstallers have disappeared Hmmmm....
    How can I revert back to earlier versions of QT, and Itunes, or better yet make the new ones output digital audio through the spdif of my Rev sound card (it used to work great).
    Thanks for any suggestions....
    MDD Dual 1Ghz Mac OS X (10.3.9) M-Audio Revolution 7.1
    Mods feel free to move this if you feel it would do better elsewhere.

    OK, Guess I'll keep helping myself but still feel free to chime in....
    Have managed to revert back to ITunes 6, and revert back to my original driver on the Rev card. This has made 5.1 out through the spdif more stable but still no Spdif out through ITunes (simply does nothing when you press play). Works fine with analog out through the Rev card. Now the hard part. Reverting the Quicktime back to 6.5.?.
    Have tried similar tactics to the ITnes revision ie deleting receipts but still won't take the 6.5.2 reinstaller. Anything else you can suggest?
    Thanks...

  • Spdif out to amp probl

    i have the audigy 2 zs platinum pro it is connected to my yamaha 430 reci'ver with the cox (spdif out).
    i played ac3 movies from my com' and still i dont hear in 5. ch.
    when i configure the settings to 5. i hear only L & R....
    WHY?
    p.s. english is not my best language...

    dagdedan,
    Check the following article and set the sound card decoder to SPDIF Passthrough.
    http://us.creative.com/support/kb/article.asp?l=2&sid=2929
    Also you will need to select a similar option from the DVD playback software so that it could also bypass the decoding to the receiver.
    Jason

  • SPDIF out IS

    I am having trouble with the set-up of my SPDIF Digital Out to Sony digital processor. (DPP)
    I am using a Audology 2Z, & ATA hard dri'ves
    First I turned off all EAX / Digital speaker items then I checked the spdif out button. Got a lot of hissing sounds with normal sound while playing DVD movies copied to my Hard disk.
    Colateral Damage plays music out of the R& L speakers but there are no voices, no center or rear
    I robot plays music & voices but only R & L speakers, no center or rear.
    Note: If I connect speakers to the PC everything plays normal (with the right settings). I want to connect the PC to my hometheater system.
    What am I missing in the set-up process?:smileysurprised:Message Edited by tom566 on 0-0-2005 07:02 AM

    I think this is what we both need but i cant get anyone in creative labs to tell me whent its comming out in the states
    I think there may be some confusion in this as we are introducing a new accessory with a similar name to the older Digital I/O 2 cards. There is a new I/O module that is being released that is what I believe you are referring to in the documentation. It has not been released in the US market as of yet, but is very similar to the breakout module that came with the original I/O 2 cards, and almost identical in appearance. This new product has update circuitry to work with the newer cards...
    http://uk.europe.creative.com/shop/product.asp?prod=773

  • SPDIF out on RS480M2

    I have an Athlon 64 3000+ with an MSI RS480M2 and 512 MB of DDR333 RAM with 1 Seagate IDE 80 GB HDD. There is 1 analog SPDIF out on my motherboard, i tried connecting it to my home music system, but no sound came out!!! How do i manage to get sount from the SPDIF??? 

    SPDIF stands for Sony/Philips DIGITAL Interface Format.  It is an interleaved 44.1kHz (CD) or 48kHz (DAT) format for digitally transferring
    linear PCM encoded digital music information.  It is, as the name suggests, digital and cannot be listened to without first converting to analog.
    The menu entry that is in the panel is misleading in that it appears to suggest that the SPDIF can be analog.  This is not true nor is it even
    possible.  If it were analog there would be no way to reconstruct the multi-channel (stereo or 5.1) nature of the signal from one connector source.
    I believe that it means that the SPDIF and the analog out can be active at the same time.  If you want analog out use a 1/8" plug to stereo RCA
    plug Y-cable available at Parts Express or Radio Shack plugged in the middle audio connector next to the SPFIF and enable analog (the green one).
    Plug the RCA ends of the cable into your amp using and AUX or CD input.
       SPDIFs are made to be fed into either an outboard DAC (Digital to Analog Converter) typically used in high end audio systems or
    into digital inputs on DTS  home theatre receivers.  Some computer speakers (I think Creative or Logitech make some) also accect SPDIF.
    Such a cable for the analog is here...
    http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=181-590

  • "Speakers" output also outputs on "SPDIF Out"

    Dear Creative Community,
    I tried any recent drivers (Vanilla Creative 2.8.3, 2.8.5?PAX 2.0 and XFI AuzenForte .0 by DavidK), with the same results: Whenever I play sounds on Speakers Out, it also gives the same output on my SPDIF Out. Now I do not want this for the following reason: I used to use Skype on my Speakers (Headphones), while listening to music on my SPDIF Out. Are there any workarounds/other drivers to accomplish this?
    eBait

    EI would like a solution to this problem as well
    What happen to the bypass option that we had with SPDIF Out.
    I have found that SPDIF output option?works on PowerDVD 0 and some games, but not on iTunes when playing music, I need to set to Speakers Out to get sound?

  • Audigy2zs spdif out in Vista Ultimate32

    Hello All, I'm at my witts end here! I'm trying to get spdif out in vista by using the same configuration from XPP, but its no go.
    I dl the Audigy2zs vista drivers from creatives web site and installed them in my newbuild with no problem.
    In XP to get Spdif out:
    Speakers setting in xp: = sound 5. + digital out
    Creative audio console: = spdif passthru to external decoder =? Logitech 5. THX, DTS decoder/Speakers
    PowerDVD 9 Ultra: sound = Spdif
    THX Console = 5.
    But Vista will not produce bitstreamed compressed sound out like XPP.
    In Vista Sound: Spdif
    Creative audio console = spdif passthru to external decoder =? Logitech 5. THX, DTS decoder/Speakers
    PowerDVD 9 Ultra sound: = Spdif
    But all I get is static. Is there something I'm missing? am I configuring this right?
    HELP!!!
    regards,
    Asamp

    Hi asamp
    It sounds?OK about your setup. what I shall do is just give you few suggestions to double check with.
    1. First make sure your optical/coaxial cable works fine and also your z-5500's control pod; if it is fine...
    2. Check whether you have selected Dolby Digital li've/DTS connect under the "Encoder" tab of your Creative Audio Console; if it is selected de select it.
    3. Check whether you selected 'spdif passthrough' under the decoder tab of Creative Audio Conole. If it is not, select it.
    4. Go to' Control Panel' ---- 'Sound'----Select SPDIF Creative Audigy-----Select 'Properties' tab------ select 'Levels' tab and check whether the sound level is set on very low (say?0) (its a 0-00 scale) if it is set in low please move it to a higher value (80/90/00).
    After all these measures still your problem persist; go to 'control panel' select 'sound' select 'SPDIF Audigy 2' and set it as default; restart windows and try a DVD.
    Try these and let me know whether it work or not
    GOOD LUCK
    acousticwave

Maybe you are looking for