Speacker of my hp pavilion dv2519tu not working my hadfone is ok. so i want to repaire my specker

Dear sir,
 Iwant to repaire my Hp Pavilion Dv2519tu in Ahmedabad, Gujarat, India. kindly send me your service center Address and contact number of same.
Nilpesh

Dear sir,
 Iwant to repaire my Hp Pavilion Dv2519tu in Ahmedabad, Gujarat, India. kindly send me your service center Address and contact number of same.
Nilpesh

Similar Messages

  • HT1766 # is not working in my iphone 4s, when i want to see how much credit i have in iphone, i need to put # on that, than it calls and end, it is not working and not showing anything..

    # is not working in my iphone 4s, when i want to see how much credit i have in iphone, i need to put # on that, than it calls and end, it is not working and not showing anything..

    http://support.apple.com/kb/HT1848  Did you transfer your purchased item, take a look at the link

  • I have 10.7.3 lion on my computers an iMac and a macbook pro plus a new iPod touch, and two older touches, now trying to sync my calendars is not working deletes some events, duplicates others, I want all my calendars to be the same.  Any ideas

    I have 10.7.3 lion on my computers an iMac and a macbook pro plus a new iPod touch, and two older touches, now trying to sync my calendars is not working deletes some events, duplicates others, I want all my calendars to be the same.  Any ideas

    Have you tried resetting the SMC ?     >  Resetting the System Management Controller (SMC)

  • HP dvd writer/cd writer combo on HP Pavilion 735w not working in Windows 7 Home Premium

    My cd/dvd writer combo on my HP Pavilion 735w is not working at all now.  Any help would be greatly appreciated. 

    Hi,
    Try this link and see if you can find a firmware up date. 
    Have you tried running diagnostics on the CD/DVD drive?
    This is a User Forum so HP Tech support does not monitor the postings.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Built-in microphone on HP Pavilion DV6500 not working in Windows 8

    Hello, 
    I would like to know why my built-in microphone does not work after I installed Windows 8 Pro 32-bit on my HP.
    Please note that before on Windows 7 the microphone did worked. 
    Service tag dv6551ea
    p/n: GJ013EA#B1A 
    Windows 8 Pro 32-bit
    Thank you!

    Hi  ,
    Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP Pavilion g4-2020tx Notebook and Bluetooth not working. Here are some links that might help.  I would check to make sure Bluetooth is on. It shows you how to do that under Connecting Bluetooth. A device such as computer might need to have the Discovery setting turned on. To turn on Discovery in Windows 8, from the Start screen, type Change Bluetooth to open the Search charm, and then select Change Bluetooth settings from the search results.  Hope this helps. Thanks.

  • Re: BIOMETRIC FINGER PRINT DEVICE ON MY HP PAVILION dv6 NOT WORKING AFTER REINSTALLING O/S

    Hi Dragon-Fur,
    Please my notebook
    Product #: WC195PA#ACJ
    Product Name:  HP Pavilion dv6 Notebook PC
    Model: dv6-1337TX
    SERIAL: [Personal Information Removed]
    CAN U PLEASE HELP ME ABOUT THIS LAPTOP.
    THANX IN ADVANCE.

    Avi007 
    Welcome to the HP Community Forum.
    I have created a new Post of your own for you -- the previous Thread was unrelated to your inquiry in many ways; the Thread is no longer active.
    Because you originally tagged onto someone else's Thread, it is difficult to discern whether you have indeed just reinstalled the Operating System on your system OR whether you have just picked a Post that sounded similar and added to it.  To some extent, the details make the difference.
    Hopefully you still have your Digital Persona Software; I do not find a replacement copy of the software in your Notebook's support pages -- I recommend you think carefully before removing your existing software.  Check your Recovery Manager for the original software that was installed on your system -- the software may be available there.
    The following applies to Windows 7:
    Your Notebook's Support Pages:
    HP Pavilion dv6-1337tx Entertainment Notebook PC Drivers
    Your Validity Sensor Driver
    sp45050 Validity Fingerprint Sensor V2.1.0.2.A
    Please see the following Dragon Document for help to reinstall your Digital Persona software:
    Instructions to Update Digital Persona
    Please understand that I have not used this Software in years -- the document is provided "As Is" and without guarantee.
    Click the Kudos Thumbs-Up to show you appreciate the help.
    Click Accept as Solution when the Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • Pavilion 23BW not working in digital

    Sir:
    I just bought a 23BW monitor that is not working in "digital" mode (with the digital cables) but does, after a lot of playing, work in VGA mode. The screen says something like "monitor is going to sleep" after a partial start up.  Any suggestions?

    Hi John,
    Please post the product number for the monitor that you are using.
    Is this 23BW your monitor?
    Use either a HDMI cable or a DVI digital rated cable. Do not use adapters and only connect one cable to the monitor.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Having trouble communicating with ipod says software was not installed correctly and then asks if i want it repaired but couldnt need help

    Having trouble communicating with i pod says software was not installed correctly and asks if i want it repaired but then says could not be repaired.Installed uninstalled numerous times but nothing dont know what else to do.

    See the second box of  Troubleshooting issues with iTunes for Windows updates.
    tt2

  • DVD/CD/Blu-Ray Drive on HP Pavilion DV6 not working....

    HP Pavilion DV6 with Blu-Ray
    The DVD/CD/Blu-Ray drive suddenly stopped popping open or being recognized. I need to double check that there is nothing else I need to try to fix before having to buy a replacement part.
    I've already tried....
    1. reseting my computer back to factory settings (I know I had a virus or malware and then when it died I just decided to set the whole thing, but it didn't fix the dvd drive)
    2. Removed cd. (I had to remove the drive to get the cd out. It was a library cd so I thought that the security strip on it might have caused a problem.)
    After these two things it still isn't working. Everything else is fine. I just want to make sure there is nothing else I need to try or check before buying a replacement part.

    Hi RavenMidnight,
    For the DVD/CD/Blu-Ray drive no longer ejecting, there is not much troubleshooting that you can do to resolve the issue. I have included the document 'Opening a Stuck CD or DVD Drive Tray (Windows 7, Vista, XP)'. This document will show you two ways as a work around for opening the drive. When you do have the drive open, double check to make sure that there are no obstructions in the path of the tray.
    If there are not obstructions, and the tray is still not functioning properly. I have included the document for 'Steps for Removing and Replacing the CD or DVD Drive'.
    Please let me know if any of these steps have resolved the issue, thank you.
    I worked on behalf of HP

  • Windows 8.1 install and HP Pavilion 23bw not working now as second monitor‏

    Prior to the 8.1 upgrade everything was working fine. 
    I installed the latest driver from HP for this monitor which looks like it's from February of 2013 so probably not current for the Windows 8.1 update.
    I should add that I'm running the HP monitor through a ThinkPad USD 3.0 Dock and using a Lenovo Yoga 11S

    Hi
    This looks like a issue with the graphics card drivers on the notebook.. have you tried updating the drivers of the graphic card after windows 8.1 update? if not try to do that.
    Hope this helps.
    ***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
    ****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
    -VJ
    Although I am an HP Employee, I am speaking for myself and not for HP.

  • SD card reader on Pavilion g7 not working

    I have a Pavilion g7 notebook, and lately the sd card reader hasn't been working. I use it to drag music files onto my phone's sd card (I have an adapter) but when I tried to do so today, it kept saying the drive was busy although it wasn't.
    I read through the forum and kept seeing the recommendation to reinstall the Realtek SD reader. SO I did that, yet nothing has happened. Please help! I would love to have my music on my phone

    FYI - to fix problem i had to do a manual install from Device Manager using the "have disk" feature. From that popup, pick the SD Reader, then Ricoh as the manufacturer, THEN click on Have Disk and choose the location for the extracted driver (C:\WIN\DRIVERS\MEDIA).
    Good luck!

  • Did bug fix for add-ons after downloading new version. FB games do not work & add-ons still gone. I want the old version back. How can I do this?

    Downloaded version 7 today. All add-ons are gone, not disabled, but gone. The bug fix offered in this instance tells me to go look for updates. I have, and I'm totally up to date, so now I don't know what to do. The add-ons are still gone, and my games in FB are also malfunctioning. I click on a button in the game and nothing happens. I can't even play them like this. I have playing all morning, and this only happened AFTER I updated to the latest Firefox browser 7. I want the old version back, but cannot figure out a way to do this. I am mad right now and want the option to go back to the old version. If I can't get it, I guess I'll go back to IE. Thanks....

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • HT3159 iphoto program is not working on my mac air. How can i repair it or reload?

    iphoto program on my computer is damaged suddenlt and i can t re open it. Whay can i do ? How can i repair or how can i reload it?
    I am trying to download the latest version on iphoto but systeem does not loud me to dowmlod and outomatic update program does not aloud me to do that

    Try rebuilding the iPhoto library database >  iPhoto 6 and later: Rebuilding the iPhoto library
    The latest version of iPhoto requires OS X Mavericks 10.9 or later.
    You would have to upgrade to Mavericks in order to run iPhoto 9.
    See if your Mac can run v10.9 >  OS X Mavericks: System Requirements
    Mavericks is free.
    iPhoto is $14.99.

  • Aperture 3 does not work well since installing Mavericks. Constantly have to repair the library database. Any suggestions?

    Aperture 3.5.1 was working well enough for me in Mountain Lion, but it seems that switching to Mavericks has made it slower, made it crash frequently and also given me frequent messages that the database is corrupt and I need to rebuild the database library, which I have done multiple times. I also use Aperture for Photo Stream, and it is especially slow and problematic there. Any ideas? Should I just use iPhoto instead? I'm more familiar with the flow in Aperture and would need to learn how better to use iPhoto, so that would be a last resort for me.

    Aperture 3.5.1 was working well enough for me in Mountain Lion
    Aperture 3.5.1 is incompatible with Mt. Lion - you  must have had an earlier Aperture version running with Mt. Lion.
    also given me frequent messages that the database is corrupt and I need to rebuild the database library
    That message is prompted by the crashes. After a crash your library may need repairing.
    Aperture 3.5.1 was working well enough for me in Mountain Lion, but it seems that switching to Mavericks has made it slower, made it crash frequently
    Is all your software compatible with Mavericks? Plug-ins, external editors, preference panes, device drivers, video codecs? Did you install any other software, when you upgraded to Mavericks?
    Where is your Aperture library? On your system drive or external drive?
    Does Aperture also crash, if you launch it while holding down the Shift key?

  • My account is not working with my credit card.  I wanted to "CALL" someone but was told there is NO phone number.  I need help to activate (REactivate) my account.

    Need assistance.  I would prefer to actually TALK to someone to fix this problem.  Is there a phone number to call to actually fix my iTunes Store account billing issues?

    There is no one to talk to.
    Contact itunes support:
    http://www.apple.com/support/itunes

Maybe you are looking for

  • Timeouts when file transfer

    Hi, I have used Dreamweaver CS3 without any problems for 2 years and now suddenly the file transfers are very slow and will never end. I use Passive FTP as recommended by my web hotel. When I check in the log there are a lot of timeouts, then it conn

  • Activate Profitability analysis

    Dear Gurus, Whnever My SD member is creating the Excise Invoice in J1IIN, thn the message is coming as "<i><b> Activate Profitability Analysis in Controlling Area</b></i>". After activating the same the message is coming as " <i><b>System failure dur

  • Java code to access the SLD

    Hi, I'm writing a java application that needs to connect to the SLD Server and then query and return data about the SID and available instances and associated database(s). I have figured out the connection piece using  SAP_JCODestinationAccessor, but

  • My camera won't open in iPad?

    I can't open my camera on iPad 2 all of a sudden.  Is ther e remedy to correct this.?

  • CJ40 & KKE1 Thro' CJ20N Tcode

    Dear All, Can we do CJ40 - Change Cost Planning & KKE1 - Base Planning Object through CJ20N - Project builder Transaction. Like Easy Cost planning we can do thro' CJ20N Tcode. Pls confirm me this feature is available in CJ20N Tcode. Regards, Sandeep