Speaker adapter for old imac (bubble) speakers?

I was hoping to use the old 'glass ball' looking speakers from my previous imac on my mac book pro laptop but the jack is not the same
Does Apple make an adapter that will allow me to use them?
Many thanks!
Bob

Hello Bob,
You will need to find and purchase something called an ' iFire '. Just where you will find one these days, I do not know. There will be some around for sure.
Regards.
Ian.

Similar Messages

USB adapter for old imac

I know this should be in the crt imac forum, but i need a response soon.
I'm looking for a wireless usb adapter for a crt imac. This mac has the capability to use an airport card, but none is installed.
Are there any usb adapters that are mac compatible? If not, is there anywhere i can find an old airport card (not airport extreme).

Hi John,
You want one of these:
http://www.linksys.com/servlet/Satellite?childpagename=US%2FLayout&packedargs=c% 3DLProductC2%26cid%3D1118334782530&pagename=Linksys%2FCommon%2FVisitorWrapper
It connects to the ethernet port. I have the 'B' version on an old 450DV+, and it works well.
Steve

Can anyone recomend a good sound/speaker system for an iMac 24" computer.

Hello, Can anyone recomend a good sound/speaker system for an Imac 24"? And can an external speaker system be hooked up to this type of Imac? Thank you.

Unless it is for reasons of poor eyesight, it isn't necessary to write in all caps.
Depends how much you want to spend. This one is inexpensive and produces decent sound. But it won't necessarily be room filling (that is, depending on the size of your room.) You just hook it up to the headphone jack.
http://www.logitech.com/en-us/product/multimedia-speakers-z200

Transferring files from original imac AND external CD for old imac

I have an original iMac that has tons of files on it I would like to save. I created a LOT of materials when I was teaching and they are all on the old iMac. It also has two games I bought on floppy discs that I would really like to keep. I tried to load files on a Passport, but the iMac won't recognize it. I have two other old iMacs (not quite originals) as well, but they won't take the Passport either. They will both take a flash drive. I can take word processing files (I can't even remember the application at the moment) off the older one and convert them to Apple Works on the other one, then take the converted files to our iMac 9.1 and convert them to Pages. Then I put them on the Passport. It is a pain, but at least it works. I can also save the documents as pdfs and put them directly on the newer iMac and copy and paste in a Pages document.
The original iMac does not lend itself to any of this. What is the best way to transfer files? It seems like a very long time ago I tried to connect it to my newer iMac with an Ethernet cable but it wouldn't accept the cable. If I am remembering correctly I called Apple Support and they said it lacked something that would allow it to connect. I do not remember if I have tried a flash drive on it or not. I believe I did and it would not recognize it.
Also, does anyone know how I can manage to save a copy of the games? Since I bought them on floppies I can't reinstall them if something happens, but I believe it is within the law to make a backup copy. Someone please correct me if I am wrong. I do have an external floppy reader for the original iMac, but it only works on user created floppies, not commercial ones. If I can manage to hook up to a flash drive or another computer and I simply save the game application, will that be enough? Or is it not possible to know until I try? Will saving the application get all the necessary files?
My second question concerns the newer (but still really old) iMacs. My daughter would love to play some of the games she used to play on them, but the CD drives do not work. Does anyone know where I can get an external CD drive that we can attach to these old iMacs so she can enjoy her games? The computers work fine; she just can't insert the CDs, because it's next to impossible to get them out again.
I believe on the "newer" two we are running OS 9, at least on one of them. I do not recall the OS on the original, but it is whatever it came with. OS 8, perhaps? It has been probably half a year since we fired it up.
I appreciate any advice and help anyone can give me. We really like these old iMacs, which is why we still have three of them. If we can save the files off the original iMac, we would still keep it so we could play our two old games from time to time. :-) I would part with one of the other old iMacs, but I really need to get the files first, and since it won't take a Passport I'm wondering if I'm stuck putting files a few at a time on a flash drive. Do you think it would take an ethernet cable? It seems like I tried to connect to my newer iMac but I couldn't get the computers to recognize each other. I followed all the steps for sharing, but I still couldn't get it to work.
Thank you so much.

Have you formatted the Western Digital Passport drive as a Mac OS Extended (HFS+) volume, or is it factory-formatted for PCs? If the oldest iMac is only running OS 8, it can't recognize HFS+ volumes. It was OS 8.1 that introduced that feature. Additionally, the version of the USB support files (which is somewhat OS-dependent) on the iMacs hard drives affects what will or will not be recognized by those older computers. With each successive release of the USB Adapter Support, the database of supported devices was broadened. The easiest way to transfer the contents of the iMac's hard drive is to physically remove it from the computer and connect a USB-to-IDE adapter directly to it. These adapters come with an external power supply to provide the 12 & 5 volts needed to power the drive. The data connection block is designed to fit either a 3.5" hard drive or the smaller 2.5" laptop drive, as well as newer drives that connect via SATA. It has an included USB cable that connects to a standard USB port, enabling direct reading/writing/file transfers from the hard drive to the computer to which it's connected. These adapters are not Mac-specific in terms of design, so you can buy one at a PC store and use it. For the purpose of identifying such an adapter, here's one that's often recommended in these Forums, carried by Other World Computing. As I mentioned, this adapter is not platform-specific, so you can buy/use a less expensive one sold by PCs stores. I bought one for $15 from Micro Center (PC store), and it has worked with Macs and PCs. As for removing the hard drive from the old iMac - and I assume that it's one of the original models with a tray-loading optical drive (as opposed to the slightly newer ones that have a slot-loading optical drive), you can find directions for accomplishing that if you do a web search. The link that I had for one site (that was good for years) is no longer valid. The iMacs that have a problem ejecting disks are undoubtedly slot-loading models. There are two wide rubber rollers inside those optical drives that grip the disk to pull it in or feed it out. Over time, the rubber dries out, causing the rollers to lose their natural gripping capabilities. If those iMacs have a FireWire port on the side, I'd suggest an external FireWire optical drive. Today, the only type you'll find is a DVD±RW drive, which is more than you need for your intended purpose. A basic CD-ROM drive isn't manufactured/sold anymore. Other World Computing has a few FireWire optical drives, but their least expensive model sells for about $100. Obviously, that costs more than the value of the entire iMac at this point, but the drive will also have USB connectivity as well. You may find other uses for it with your other computers (Macs & PCs), especially if they don't have a CD-R, CD-RW, DVD-ROM, or DVD±RW drive. As for transferring a program itself, there could be other associated files. You'd want to check the Extensions and Control Panels folders for any that are named to likely indicate being a part of the program's installed files. The Preferences folder will probably have a file that has saved game settings, but a new one would be created when you run the program in another supported computer. Depending on the age of the program - and you indicated that it was on floppy disks - its compatibility with newer, pre-OS X releases might be limited. The external USB floppy drive that you use with the older iMac should read commercial floppy disks, but it will not recognize the older 800K (Double-Density) Mac-formatted floppy disks. They're disks that typically format as 720K floppies in a PC, but the variable-speed FDD in older Power Macs was able to fit an extra 80K of data onto those disks. A standard 720K "PC" floppy disk should be read by that drive, but it can't recognize an 800K "Mac" disk. A 720K/800K Double-Density floppy disk only has the slide-lock hole at one corner, while a High-Density (1.44 MB) floppy disk has an additional hole at the opposite corner to differentiate it from the older type.

New life for old iMac

My Dad still uses his circa 1998 iMac Rev. D tray loader, since I've kept it alive and up to date by replacing its dead CD-ROM drive from one I bought on eBay, installing more memory (256 MB I think), and OS updates through Panther. He's a cheapskate like me and doesn't want to shell out $1000 for a new iMac. However, lately he's complained this dinosaur was starting to run slow, no surprise since even with a minimal installation of X a few music files and emailed videos left him with less than 400 MB free space on the HD, causing multiple instances of "your startup disk is almost full" messages. Remember this computer shipped with a gargantuan 32 MB memory and a whopping 6 GB hard disk. It ran the latest incarnation of Apple's OS which was OS 8.5. No Firewire on this baby either, so expansion options are limited.
I reasoned I could remove its diminutive 6 GB HD and install the 30 GB HD I pulled from my iMac DV SE some time ago, giving the old iMac some room to breathe. But how to preserve the contents of the hard disk without having to reinstall his programs, files, etc?
Here's how I did it:
Remember there's no Firewire on the Rev. D so there's no way to connect a bootable external hard disk to it. I do have an iPod which has both Firewire and USB cables though. So I connected my 6 GB iPod Mini to the Rev D iMac's USB port, checked "manually manage music" and "enable disk use". Deleted all music files.
Ran Carbon Copy Cloner and cloned the iMac's disk to the iPod (this took a couple of hours over USB). Set the Rev. D aside.
Opened the DV SE and removed its 120 GB HD. Information from this web site was most useful. Installed its original 30 GB. Booted it from my Panther disk and partitioned the HD to contain one 7.9 GB partition and the balance in another. Installed Panther on both partitions. Booted the DV SE to ensure the Panther installation went OK. No problems.
Just for kicks, I set the startup disk to the iPod over Firewire and booted the DV SE from it. Lo and behold it works! there was the old iMac Rev D's old self displayed on my DV SE. Who would think you could use an iPod as a boot disk? Everything worked like it did on Dad's old machine. Weird!
Selected the startup disk to the larger partition of the 30 GB internal HD and booted it. Ran Carbon Copy Cloner to clone the iPod to the smaller partition. This went a little faster since it's now over Firewire. Selected the startup disk back to the smaller partition of the 30 GB HD.
Removed the 30 GB HD and reinstalled the 120 GB in the DV SE. Made sure the the DV SE still works then set it aside.
Opened the iMac Rev. D and removed its pathetically diminutive 6 GB HD. Installed the 30 GB. Closed it up and it attempted to boot. It wouldn't work and got hung on a blue screen. Hmm.
I booted from a Panther disk. I went to reset the user password, but quickly determined there were no users installed on the boot partition. None. Obviously this would present a problem. Apparently it wasn't a good idea to install Panther on the larger partition using an identical user name and password - I think this confused Panther which deleted the account from the boot partition. If I had to do it over again, I would have set up a temporary account so I could boot from the larger partition and use CCC to restore the smaller partition. Anyway, no immediate solution came to mind, so I did an archive and install, preserving user settings and all that.
Oddly enough the only "user" was the system administrator. Fortunately, the system administrator had all the same user settings and files that my Dad had so I simply renamed the home folder, set the login name and password accordingly, and that was that.
For some reason Safari didn't work. Safari would launch, but no window displayed and clicking on the menus did nothing. I could only select "quit" from the Dock. I checked my permissions, trashed the prefs file, everything I could think of, but nothing helped. In desperation I downloaded and installed Safari from Apple's web site (using Firefox which was already installed and fortunately still worked). Amazingly, the same thing happened again. No menus would work. Finally, about to give up, I extracted an older version of Safari from the Panther install disks using Pacifist. That worked! I have no idea what caused this bizarre problem.
Now, back to the reason I started this to begin with. The boot partition is limited to 8 GB which is better than the 6 GB it used to be, but there is only a little more than 2 GB free now. There is another 20 GB on the remaining partition, but how to use it? As I understand it, you can use Netinfo Manager to map the user's "home" directory to another volume. I haven't tried that yet, but when the boot partition nears capacity, I'll give that a shot. I'm not looking forward to the permissions nightmare that may result.
So, success for now. The machine runs like new, sure it's a little slow but he's not running Photoshop or anything. That fan makes a racket – how spoiled we've become.
There was probably an easier way to do all this, but hey, it worked.
By the way my DV SE runs OS X 10.4.9 flawlessly with a new 120 GB HD and 384 MB memory. I have no plans to retire it any time soon.
PB Ti 1 GHz  PB 17 1.33 GHz  iMac DV SE  iMac D  iPod mini  Mac OS X (10.4.9)  Legacy (Appletalk) networked printers  22 years Apple!

Thank you Robert; that's helpful.
The way to map a user's entire Home folder to another volume is simple: In Netinfo Manager, select the desired user, then change his "home" property to the path where you want the new home folder to be. Theoretically this could be any volume anywhere. You can then completely delete the original home folder.
I tried this with a test account and it seems to work ok, I just had one problem with a haxie (cleardock). It won't load its system preference. Don't know if it's related to moving the home folder or not. In any event, I'd do lots of testing before making this change permanent.

Uses for old iMac (Rev. B)

I still have my very first Mac - a Rev. B Bondi Blue iMac. It was, until recently, running Mac OS X 10.1.5. Although, it had a disk problem which I managed to recover from by doing a clean install of Mac OS 9.1.1. My dad was using it until he purchased an eMac for himself.
At home I'm using my iBook on the Airport Extreme network - shared with my housemate and her G4 Powerbook. I know that I can connect the iMac directly to my AirPort base station and it can use use the Net and be part of the home network.
I think the iMac still has loads of life in it. I was wondering what other Mac users are maybe doing with their old machines. I'd like to hear of any recommendations.

I've installed OS 10.2 on an iMac I found in a dump. I am planning to take it to work so I can use it for personal e-mail.
Some enterprising members of the iMac community has found a wooden box is the best place for an iMac to retire. See http://www.glenbo.com/imac_box/details.php .
Generally, having more than one computer per person is kind of a pointless thing. It simply chews up electricity and does not accomplish very much. You have to store your files somewhere and ideally that location is centralized, not scattered over 2 or more computers. Invariably the extra computer becomes kind of useless because it doesn't have any of your stuff on it. It no longer feels like 'yours'.
I have many many G3's sitting here and I'm using my Mac Mini (and a G4 PCI as server) and couldn't think of a use for any of my other Macs. I spend about $30 a month on electrical power for all those computers. I personally can't think of a reason to justify it besides making NStar rich.
If you're wondering why I am hanging onto those G3's that I found -- because I can. Since I can't sell them for a decent price, they might as well sit here and take up space.
I wish I could make more use of those old computers, but it is very hard. Even if I linked all of them up to make a Beowulf cluster, it still wouldn't be as powerful as my Mac Mini alone.

New use for old imac

I'm considering an upgrade for my iMac G5 (1.6 GHz PPC) to a newer Core 2 Duo, and am wondering if there's some use for the old iMac besides door stop? Specifically, is there a way that I can use the old machine for backup? It has a newer hard drive. Thoughts appreciated.

You can use it as a monitor for your new mac using an app called ScreenRecycler, or take it apart, throw in a big HD and like the other poster said, use it as a type of home server, or you can sell it, or you can donate it to a company that will refurbish it and send it off to less-fortunate families, or you can make a big shrapnel bomb, or you can.... well you get the idea. I would suggest using it for the monitor though

Printer for Old iMac with OS8.6

I'm trying to help a friend with an iMac DVD running OS 8.6. They need to get a new printer. Are there any printers that will run with OS 8.6 or can the old iMac be updated with an earlier version of OSX? Help! Thanks!

My guess would be Mac OS 8.6 can print to any post script printer. OS 8.6 includes the standard postscript print driver. About five years ago, I was able to network from the 8.6 to a networked PostScript printer.
You will want PostScript Leve 3.
Found a printer HP LaserJet 1300 Black & White specs:
http://reviews.cnet.com/laser-printers/hp-laserjet-1300/4507-3159_7-21096963.htm l
These are probably similiar printers HP LaserJet 1xxx
Robert

Airport Express as "Ethernet-Bridge" for old iMac - how to configure WPA?

Hi,
I have a very old iMac G4, which up to now was connected to my network via a Netgear wireless bridge. As I switched my router to a Fritzbox, which supports N-Draft I wanted all network clients to use N-Draft, so I bought the new AX.
It works ok as an Ethernet bridge when configuring the wireless part to "connect to a wireless network", "allow ethernet clients" and no encryption.
I am now online with that configuration.
But when I activate either WEP, WAP, WAP&WAP2 encryption on my Fritzbox router and then in the Airport Express it won't get an IP-address via DHCP anymore. It can connect to the wireless network, but via the ethernet connection it does not assign ip-address anymore.
I already tried assigning the IP-address manually. The light on the AX is green, but DNS does not resolve, although I also entered the DNS server of my provider manually.
Any idea? Is it perhaps just not possible the use the ethernet port if the wireless connection is encryted?
Regards,
Jörg

Hi again,
I can answer my question now: my router (Fritzbox) and the Airport Express can only communicate with ONE kind of encrytion - only via WAP2.
WEP does not work, WAP does not work, WAP/WAP2 does not work.
But at least now I have a complete N-Draft Network with good encrytion. It only cost me 4 evenings of long trial & error configurations.
Hope I can at least help others,
Jörg

220V power adapter for 110v iMacs, Time Machine, etc

we are moving to hong kong next month and I have 3 iMacs in our house, a 1 terabyte Time Machine backup/802.11n device and an airport.
Does anyone know what i need to do to support 220v power in Hong Kong? Does Apple make/sell devicees that convert the power?

Hi,
This article could perhaps be of some interest to you.
Generally speaking, if in doubt, you will usually find a label indicating the voltage range for AC adapters et cetera.
Jan

Where to obtain original disks for old iMac?

I bought a Late 2006 20" iMac, that has some issues. The seller just sent me the unit, nothing else (no cords, disks, etc.). So I thought I could run AHT. I wiped the hard drive, installed Lion, but holding down D on boot doesn't do anything (just boots normally). I guess remote AHT over the Internet is not supported on the old hardware.
I have been perusing forums (fora?) looking for info on how to get AHT to run, or how to obtain. I copied the ".diagnostics" folder from the Apps DVD from my 2009 MacBook Pro (Snow Leopard btw) to the hard drive, but holding down D now boots recovery and only allows me to run Disk Utilities or reinstall the OS.
I called up AppleCare and they said I could buy a copy of Snow Leopard, so I got that, but holding down D while the disk is in the superdrive doesn't do anything special, just boots into the Snow Leopard install, I don't have any pulldown or other option to run AHT.
Does anyone have the original disks for this machine, who would be willing to record a DMG or ISO image and transfer it to me? Or, how else would I obtain it? Obviously what AppleCare sent me didn't work, and the ".diagnostics" folder wasn't on that disk (as was noted in many threads on similar topics).

FWIW, replacement discs have always been available, as long as the machine's serial number doesn't pop up as a stolen machine. AFAIK, there's no $16/disc burn fee, but just a nominal S&H charge, usually under $20 USD for the common two-disc package that shipped with Macs.

What video card should I purchase for old iMac?

I have an old Mac 24 inch, and it seems that the video card is not working. How do I find which video card to purchase? I have a serial number.

You could take a look into an appropriate repair guide to see what is shown for your model build identifier version of iMac (intel) with a 24-inch display; there were at least three models with that size display. Not a single one, was of PowerPC architecture.
•iMac Intel Repair - iFixit guides:
http://www.ifixit.com/Device/iMac_Intel
Depending on which one it actually is, could change processes
involved, availability, part numbers, or price of parts.
Good luck & happy computing!

New power adapter for old macbook - It doesn't work!

Hello!
My MacBook is 3 years old. My power adapter got broken at the end where you put it into the socket.
Now I bought a new power adapter. The adapters have changed now. The end where you put it into the computer looks now a little bit different. But they told me in the Apple Store that it will also fit my 3 years old Macbook.
At home it really fit my Macbook but it didn't charge. Nothing happened, no light. How can that be? Then I combined the two, the end for the socket of the new power adapter and the other part where you put it into the computer of my old power adapter. Now it charges. So is the problem after all the part where you put it into the computer of the new power adapter that looks different now?
Or what can I try now?
Thank you for help!
Sorry for my bad English.
xenchen
Message was edited by: xenchen

You may need to download and install the SMC firmware update:
http://support.apple.com/kb/DL1312?viewlocale=en_US

Camera adapter for old ipod photo 60GB - does it work with ipad 2?

Ive bought my wife an ipad 2 for Xmas.
whilst looking at the accessories could've got carried away. Definately like the camera adapter kit, but realised the USB adapter looks identical to an adaptor ive already got for the old ipod Photo 60Gb (a few years old now obviously).
i cant test it on the ipad as its all boxed and wrapped, so to save another wad if someone could enlighten would be grateful !

thats pretty conclusive then, thanks for the steer.

Can someone recommend a good wireless usb adapter for an iMac?

I would rather use a wireless usb adapter instead of having to purchase an airport card. Thanks a lot in advance for your assistance,
Christine

This is the discussion area for Intel-based iMacs. Since you have an iMac G5 you probably want to make any future posts in the iMac G5 discussion area.
Its probably cheaper to get an AirPort Extreme card but you might want to take a look at www.macwireless.com

Speaker adapter for old imac (bubble) speakers?

Similar Messages

Maybe you are looking for