Speaker and audio jack is not working

My laptop speaker and headphone jack is not working.So am not able listen anything on laptop.Please give me a solution on it.

Hi  ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion g series Notebook and issues with the sound. Here is a link to help troubleshoot issues with the sound. Please note remove any and all USB devices. Disconnect all non-essential devices and headphones, as these could cause some issues. Here is an automated tool for troubleshooting Windows 7. It has a built in Audio repair built into it. I hope this helps with the sound. Thanks.

Similar Messages

  • Microphone speaker and audio jack is not working?

    hi i buy a I phone 5 S  in march from E max UAE . Its been 3 month only but my phone audio jackpot is not working  ,microphone and speaker is not working moreover if i open some app for longer time and during charging it get hot. I took the phone to the store tell them the problem and the phone is in warranty also but they didn't change the  device  they say we cant change and just repair the device. its been two days my phone is back again i am facing the same problem .can anybody suggest me where should i go for complain  and what i will do to change the device.

    I've asked the hosts to relocate your post to the iPhone forum -> Using iPhone - this is the MacBook Pro forum.
    Good luck,
    Clinton

  • Front panel audio jack is not working on K9N Neo V2

    My front panel audio jack is not working on K9N Neo V2. I check the JAUD1 cable and it appears to be connected to the front panel audio jack. My soundcard driver cannot detect any gadgets when I plug it in the front panel. My audio drivers and BIOS are up to date.  Is there any known solution to this? My computer is only a few months old and I have not tried the front audio jack until recently. I'm on Vista home premium btw.
    Also, I've got another problem, my processor is AMD 64x2 4400+ overclocked to 2.63Ghz. I've been using that clock value ever since I built this computer and stress tested the processor and found that it would not cause any problems like hanging or overheating. However, I recently decided the need for AMD's Cool & Quiet technology and enabled it. It caused BSODs every few days or per week that didn't happen before. I tried it with the default clock value and it still causes BSODs. Can someone help me?

    Quote
    Thanks. Its ironic that disabling it actually enables it.
    It has to day with the front panel audio wiring of your case.  How many wires are there that can be connected to the board's pin header?
    Quote
    Sound quality isn't very good
    Can you be more descriptive?  Is the quality better if you plug the headphone into one of the jack at the back panel?  (Also, make sure you tell the Realtek HD Audio Manager, that a headphone is connected (and not regular speakers).

  • Speaker and main button does not work

    My iphone suddenly fall down and after my speaker and main button is not working. other things are ok. So how can I fix this hardware problem?

    Send it to a Apple Store to request for repairs.
    Or restart the iPhone and see if the home button will work again. It could be that the OS is not detecting it or is not responding.

  • Headphone and mic jacks do not work

    I disabled the onboard audio drivers to install an Audigy 2ZS board in my new Dimension 900. Now the Dell factory installed mic and headphone jacks on the front of the computer do not work. I'm assuming thats because I disabled the onboard drivers? Any way to get them working with the 2ZS card? I understand that the mic and headphone jacks have cables that can be hooked to a card. Does the 2ZS support this kind of hookup?
    Thanks

    Hey everyone
    It's very possible to connect your front jacks to Audigy. I'm currently using my headphones that way.
    Here is what you do:
    . On top you audigy card
    <IMG src="http://images0.fotki.com/v203/photos//2786/2503093/CreativeAudigy2ZS-vi.jpg">
    2. Audigy pin assignments (connect you front panel cable to things marked in red)
    AUDIGY FRONT PANEL CONNECTIONS======================================= =========================
    - Analog Ground< 2 - Headphone Out (Left) 3 - Audio Backpanel Mute -- mute (ground) the backpanel when using headphones< 4 - Headphone Out (Right) 5 - same as #3< 6 - Mic Input 7 - key pin (shouldn't be there) 8 - VREF out -- voltage reference for Mic 9 - MIC IN MUTE -- ground when mic isn't plugged in, +2VDC when mic is plugged in0 - Audio cable detect -- will be ground when headphones are plugged in (not used)
    I'm still working out the kinks. For instance, if you've ever had an Audigy Dri've (comes with Platinum and Pro version of Audigy), you know that when you plug in headphones, sound to speakers mutes and Creative Speaker Settings panel automatically switches to "Headphones". That was nice. I don't know if it's possible this way.
    Enjoy,
    Igor

  • Audio jack port not working

    i installed windows 8.1 on my laptop HP 655 and i have high definition audio device drivers installed but i cant hear any sound from my headphone or external speakers when i plug the audio jack in its port. but the internal speakers are working well... please help

    Dear gbonyo -
    I understand that after installing Windows 8.1, your speakers and headphones do not work.  Well, that's annoying...  I will try to help. 
    - Before going through these steps, make sure that the speakers and headphones are connected to the correct ports. (I know this sounds silly, but sometimes it happens.)
    The first and simplest thing to try is the audio playback troubleshooting tool:
    1. With the headphones and speaker plugged in to the laptop, type "troubleshooting" at the Start screen to open the Search charm, and then select Troubleshooting from the search results.
    2. Under Hardware and Sound, click Troubleshoot audio playback and then click Next when the Playing Audio window opens.
    3. A new window opens. Select the device you would like to troubleshoot. Then click Next and follow the on-screen instructions.
    4. If a recommended action displays, select Apply this fix or Skip this step to continue to search for other problems.
    If the above does not resolve the problem (and/or it does not find your speakers/headphones) it could be that the laptop does not know that it has speakers/headphones attached to it.
    1. From the Start screen, type "sound" to open the Search charm, and then select sound from the search results.
    2. Click on the Playback tab.
    3. Right-click an empty area of the Sound window.
    4. Click the check boxes to select Show Disabled Devices and Show Disconnected Devices.
         If the device is listed as "Currently unavailable" or "Not plugged in," disconnect it, and
         then reconnect it from the port.
    5. Test the device by sending a signal from the sound source (For example: Play an mp3 file).
    6. Look at the bars next to the device name on the Playback tab:
    If the gray bars next to the line-in audio device name change to green, the device is active and an audio signal is passing through the line-in port. The issue should now be resolved. 
    If the bars remain gray and inactive, the computer is not recognizing a signal. Leave the Playback tab open and proceed to the next step.
    7. From the Playback tab of the sound window click the port that you want to use (there could be one or more ports).
    8. If the device you want to use contains a small circle with an arrow pointing down, the device is disabled. To enable the device, right-click the device name and select Enable.
    9. Click Set Default to make this device the default line-in audio device.
    10. Click OK to make the changes.
    Please let me know if this resolves the problem.  If it doesn't, we can try a couple of other things.
    Sincerely,
    dhtp
    DH
    I work on behalf of HP.
    Please click "KUDOS Thumbs Up" if I have helped you, and click "Accept as Solution" if your problem is solved. Thanks for the feedback!

  • Audio jack does not work after 10.9.1 update

    Hi folks --
    I have had an issue for a while now that maybe some of you have seen.
    I have a 2011 iMac 27, and upgraded to Mavericks months ago, no issues. For the holidays I bought an AppeTV 3rd gen for the wife, and after setting it up on the network, I can no longer play audio throught the audio out jack on the iMac to powered speakers.
    Now, the issue is, I cannot tell if it stopped working before the AppleTV got added to the mix, or after a Mavericks update. It has been about 3 months...
    The machine is out of warranty, and I have the sneaking suspicion that the audio jack on the motherboard is to blame... but not certian. Has anybody had that issue or seen it be an issue? I consider myself pretty up to date on the Mac support sites like Macintouch and iFixtit, but have not seen anything regrading this issue on this model.
    I have done a deep clean with Onyx, zapped the PRAM, and done a few restarts. No joy.
    Anyone have any wisdom to impart?
    Thanks in advance
    Michael

    Raymond Rogoway wrote:
    Used Software Update to update to 10.5.1. Now my install disk will not boot. Drive kicks out disk after awhile. Ran Disk Warrior which reported no changes. Repair permissions.
    Ray
    Does the disk also get ejected when you are running Leopard, or only when using it for booting?
    Have you looked at it physically for scratches or that dirty film some DVDs had?

  • Iphone 4s microphone, speaker and ear jack doesn't work.

    Noticed hissing on speaker when trying to use the microphone feature on texting, and a couple of days later the microphone, speaker or earphones do not work.  Can't hear ringtones and can barely feel the vibration for a notification of a message.  I can place a call, but the receiver doesn't hear me or I them.  Called verizon support to no avail.  The phone is only a year and a half old.  Anyone no anything about this?  I didn't drop it or get it wet.  It's been in a heavy duty otterbox since I bought it.

    Hi gary,
    I'm sorry to hear you are having issues with the sound on your iPhone.
    I would suggest removing the iPhone from the Otterbox and trying these troubleshooting steps:
    iPhone: Can't hear through the receiver or speakers
    Resolution
    Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    Make sure the Ring/Silent switch is not switched to silent.
    While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
    Restart the iPhone.
    If restarting the iPhone doesn't resolve the issue, try restoring the device.
    If the issue persists, go to the Service Answer Center - iPhone for information on service.
    iPhone: Sound muffled or low from the speaker or when speaking into the mic
    Check the volume setting on your iPhone. You can adjust the volume by pressing the volume up and down buttons on the left side of the iPhone.
    If you are using a third-party iPhone case, make sure it is not covering the speaker, microphone, or top microphone. Try making some calls without the case to see if a caller can now hear you more clearly or play music to see if the speaker's volume is better.
    If you have not removed the plastic display film used for protection during shipment, either ensure that the microphone and speaker are not covered or remove the film completely.
    Check that the speaker, microphone mesh covers, and top microphone hole are not clogged with lint or other debris.
    If the speaker, microphone mesh, or top microphone (iPhone 4 only) appear clogged, please use a clean, small, dry, soft-bristled brush to clean them. To do this follow these instructions:
    Use the brush to carefully and gently brush the speaker and microphone mesh.
    Brush away from the 30-pin dock connector to avoid getting any debris into the dock connector.
    If the issue persists, go to: apple.com/support/iphone/service/faq/ for information on service.
    Hope this helps!
    - Judy

  • No switching between buildin speaker and audio jack

    Hey everyone,
    I have a X200 with a build in Conexant 20561 SmartAudio HD. Driver Version is 4.92.12.0.
    The Computer doesn't switch any more between the build in speaker and the audio jack. I do have a signal on the jack, but the speaker doesn't work.
    If I have plug my headphones to the audio jack, I can hear the sound properly and the green bars in the Control Panel / Sound / Playback menu indicate that there is indeed sound.
    However, if I don't have a plug in the audio jack, these green bars stay dead.
    Does anyone have any idea, how I can fix this?
    Any hint or help is greatly appreciated.
    Best regards,
    Tao

    Actually that's the issue! Or part of it. You fix things, it works for a while and then stops working without you changing anything. And then it starts working again...

  • MY video chat and audio chat will not work

    my ichat will not connect with any of my friends video or audio chats but works fine with regular text. when i create the video chat it says my friend left even though he did not and when he creates it it gives me an error message. o and when i first got my macbook i used to use the video chat and then one day it just decided to not work ever again. here is the error message:
    Date/Time: 2007-10-14 21:12:42.564 -0400
    OS Version: 10.4.10 (Build 8R2218)
    Report Version: 4
    iChat Connection Log:
    AVChat started with ID 2386988708.
    0x18c1af70: State change from AVChatNoState to AVChatStateWaiting.
    [email protected]: State change from AVChatNoState to AVChatStateInvited.
    0x18c1af70: State change from AVChatStateWaiting to AVChatStateConnecting.
    [email protected]: State change from AVChatStateInvited to AVChatStateConnecting.
    0x18c1af70: State change from AVChatStateConnecting to AVChatStateEnded.
    Chat ended with error -8
    [email protected]: State change from AVChatStateConnecting to AVChatStateEnded.
    Chat ended with error -8
    Video Conference Error Report:
    @:0 type=4 (00000000/2)
    [VCSIP_INVITEERROR]
    [19]
    @SIP/SIP.c:2448 type=4 (900A0015/2)
    [SIPConnectIPPort failed]
    @SIP/SIP.c:2448 type=4 (900A0015/2)
    [SIPConnectIPPort failed]
    @SIP/Transport.c:121 type=4 (00000000/0)
    [INVITE sip:[email protected]:14600 SIP/2.0
    Via: SIP/2.0/UDP m.2;branch=z9hG4bK3ff20c605b9ececc
    Max-Forwards: 70
    To: "[email protected]" <sip:[email protected]:14600>
    From: "u0" <sip:[email protected]>;tag=55614986
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 INVITE
    Contact: <sip:[email protected]>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 521
    [v=0
    o=andrewkincaid 0 0 IN IP4 m.2
    s=u0
    c=IN IP4 m.2
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2160
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 16386 RTP/AVP 12 3 0
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:-1223269774
    m=video 16384 RTP/AVP 126 34
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:20
    a=RTCP:AUDIO 16387 VIDEO 16385
    a=pogo
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480
    a=rtpID:795313422
    @SIP/Transport.c:121 type=4 (00000000/0)
    [INVITE sip:[email protected]:14600 SIP/2.0
    Via: SIP/2.0/UDP m.2;branch=z9hG4bK3ff20c605b9ececc
    Max-Forwards: 70
    To: "[email protected]" <sip:[email protected]:14600>
    From: "u0" <sip:[email protected]>;tag=55614986
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 INVITE
    Contact: <sip:[email protected]>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 521
    [v=0
    o=andrewkincaid 0 0 IN IP4 m.2
    s=u0
    c=IN IP4 m.2
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2160
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 16386 RTP/AVP 12 3 0
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:-1223269774
    m=video 16384 RTP/AVP 126 34
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:20
    a=RTCP:AUDIO 16387 VIDEO 16385
    a=pogo
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480
    a=rtpID:795313422
    @SIP/Transport.c:121 type=4 (00000000/0)
    [INVITE sip:[email protected]:14600 SIP/2.0
    Via: SIP/2.0/UDP m.2;branch=z9hG4bK3ff20c605b9ececc
    Max-Forwards: 70
    To: "[email protected]" <sip:[email protected]:14600>
    From: "u0" <sip:[email protected]>;tag=55614986
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 INVITE
    Contact: <sip:[email protected]>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 521
    [v=0
    o=andrewkincaid 0 0 IN IP4 m.2
    s=u0
    c=IN IP4 m.2
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2160
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 16386 RTP/AVP 12 3 0
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:-1223269774
    m=video 16384 RTP/AVP 126 34
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 1 rules 30:352:288
    a=framerate:20
    a=RTCP:AUDIO 16387 VIDEO 16385
    a=pogo
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480
    a=rtpID:795313422
    Video Conference Support Report:
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [BYE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP m.0:14600;branch=z9hG4bK7af685e5334a166a
    Max-Forwards: 70
    To: "u0" <sip:[email protected]>;tag=55614986
    From: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 BYE
    User-Agent: Viceroy 1.2
    Content-Length: 0
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [SIP/2.0 200 OK
    Via: SIP/2.0/UDP m.2;branch=z9hG4bK3ff20c605b9ececc
    To: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    From: "u0" <sip:[email protected]>;tag=55614986
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:14600>
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 414
    v=0
    o=surfer081890 0 0 IN IP4 m.0
    s=u0
    c=IN IP4 m.0
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2000
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 14607 RTP/AVP 12
    a=rtcp:14608
    a=rtpID:-291211226
    m=video 14605 RTP/AVP 126
    a=rtcp:14606
    a=rtpmap:126 X-H264
    a=RTCP:AUDIO 14608 VIDEO 14606
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480
    a=framerate:20
    a=rtpID:-786432875
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [BYE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP m.0:14600;branch=z9hG4bK7af685e5334a166a
    Max-Forwards: 70
    To: "u0" <sip:[email protected]>;tag=55614986
    From: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 BYE
    User-Agent: Viceroy 1.2
    Content-Length: 0
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [SIP/2.0 200 OK
    Via: SIP/2.0/UDP m.2;branch=z9hG4bK3ff20c605b9ececc
    To: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    From: "u0" <sip:[email protected]>;tag=55614986
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:14600>
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 414
    v=0
    o=surfer081890 0 0 IN IP4 m.0
    s=u0
    c=IN IP4 m.0
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2000
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 14607 RTP/AVP 12
    a=rtcp:14608
    a=rtpID:-291211226
    m=video 14605 RTP/AVP 126
    a=rtcp:14606
    a=rtpmap:126 X-H264
    a=RTCP:AUDIO 14608 VIDEO 14606
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480
    a=framerate:20
    a=rtpID:-786432875
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [BYE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP m.0:14600;branch=z9hG4bK7af685e5334a166a
    Max-Forwards: 70
    To: "u0" <sip:[email protected]>;tag=55614986
    From: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 BYE
    User-Agent: Viceroy 1.2
    Content-Length: 0
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [SIP/2.0 200 OK
    Via: SIP/2.0/UDP m.2;branch=z9hG4bK3ff20c605b9ececc
    To: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    From: "u0" <sip:[email protected]>;tag=55614986
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:14600>
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 414
    v=0
    o=surfer081890 0 0 IN IP4 m.0
    s=u0
    c=IN IP4 m.0
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2000
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 14607 RTP/AVP 12
    a=rtcp:14608
    a=rtpID:-291211226
    m=video 14605 RTP/AVP 126
    a=rtcp:14606
    a=rtpmap:126 X-H264
    a=RTCP:AUDIO 14608 VIDEO 14606
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480
    a=framerate:20
    a=rtpID:-786432875
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [BYE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP m.0:14600;branch=z9hG4bK7af685e5334a166a
    Max-Forwards: 70
    To: "u0" <sip:[email protected]>;tag=55614986
    From: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 BYE
    User-Agent: Viceroy 1.2
    Content-Length: 0
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [SIP/2.0 200 OK
    Via: SIP/2.0/UDP m.2;branch=z9hG4bK3ff20c605b9ececc
    To: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    From: "u0" <sip:[email protected]>;tag=55614986
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:14600>
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 414
    v=0
    o=surfer081890 0 0 IN IP4 m.0
    s=u0
    c=IN IP4 m.0
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2000
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 14607 RTP/AVP 12
    a=rtcp:14608
    a=rtpID:-291211226
    m=video 14605 RTP/AVP 126
    a=rtcp:14606
    a=rtpmap:126 X-H264
    a=RTCP:AUDIO 14608 VIDEO 14606
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480
    a=framerate:20
    a=rtpID:-786432875
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [BYE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP m.0:14600;branch=z9hG4bK7af685e5334a166a
    Max-Forwards: 70
    To: "u0" <sip:[email protected]>;tag=55614986
    From: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 BYE
    User-Agent: Viceroy 1.2
    Content-Length: 0
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [BYE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP m.0:14600;branch=z9hG4bK7af685e5334a166a
    Max-Forwards: 70
    To: "u0" <sip:[email protected]>;tag=55614986
    From: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 BYE
    User-Agent: Viceroy 1.2
    Content-Length: 0
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [BYE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP m.0:14600;branch=z9hG4bK7af685e5334a166a
    Max-Forwards: 70
    To: "u0" <sip:[email protected]>;tag=55614986
    From: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 BYE
    User-Agent: Viceroy 1.2
    Content-Length: 0
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [SIP/2.0 200 OK
    Via: SIP/2.0/UDP m.2;branch=z9hG4bK3ff20c605b9ececc
    To: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    From: "u0" <sip:[email protected]>;tag=55614986
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:14600>
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 414
    v=0
    o=surfer081890 0 0 IN IP4 m.0
    s=u0
    c=IN IP4 m.0
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2000
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 14607 RTP/AVP 12
    a=rtcp:14608
    a=rtpID:-291211226
    m=video 14605 RTP/AVP 126
    a=rtcp:14606
    a=rtpmap:126 X-H264
    a=RTCP:AUDIO 14608 VIDEO 14606
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480
    a=framerate:20
    a=rtpID:-786432875
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [INVITE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP 192.168.15.102;branch=z9hG4bK4205abf43ce83a59
    Max-Forwards: 70
    To: "u0" <sip:[email protected]>
    From: "[email protected]" <sip:[email protected]>;tag=834989737
    Call-ID: ae9fd496-7abb-11dc-b8cb-c3bb126213c4@lip
    CSeq: 1 INVITE
    Contact: <sip:[email protected]>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 537
    v=0
    o=surfer081890 0 0 IN IP4 192.168.15.102
    [email protected]
    c=IN IP4 192.168.15.102
    b=AS:1528
    t=0 0
    a=hwi:1028:2:2000
    a=multipoint:1
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 16390 RTP/AVP 12 3 0
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:2068315427
    m=video 16388 RTP/AVP 126 34
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 0 rules 30:176:144
    a=framerate:20
    a=RTCP:AUDIO 16391 VIDEO 16389
    a=pogo
    a=fmtp:126 imagesize 0 rules 20:160:120:640:480
    a=rtpID:1018408702
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [INVITE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP 192.168.15.102;branch=z9hG4bK4205abf43ce83a59
    Max-Forwards: 70
    To: "u0" <sip:[email protected]>
    From: "[email protected]" <sip:[email protected]>;tag=834989737
    Call-ID: ae9fd496-7abb-11dc-b8cb-c3bb126213c4@lip
    CSeq: 1 INVITE
    Contact: <sip:[email protected]>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 537
    v=0
    o=surfer081890 0 0 IN IP4 192.168.15.102
    [email protected]
    c=IN IP4 192.168.15.102
    b=AS:1528
    t=0 0
    a=hwi:1028:2:2000
    a=multipoint:1
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 16390 RTP/AVP 12 3 0
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:2068315427
    m=video 16388 RTP/AVP 126 34
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 0 rules 30:176:144
    a=framerate:20
    a=RTCP:AUDIO 16391 VIDEO 16389
    a=pogo
    a=fmtp:126 imagesize 0 rules 20:160:120:640:480
    a=rtpID:1018408702
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [INVITE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP 192.168.15.102;branch=z9hG4bK4205abf43ce83a59
    Max-Forwards: 70
    To: "u0" <sip:[email protected]>
    From: "[email protected]" <sip:[email protected]>;tag=834989737
    Call-ID: ae9fd496-7abb-11dc-b8cb-c3bb126213c4@lip
    CSeq: 1 INVITE
    Contact: <sip:[email protected]>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 537
    v=0
    o=surfer081890 0 0 IN IP4 192.168.15.102
    [email protected]
    c=IN IP4 192.168.15.102
    b=AS:1528
    t=0 0
    a=hwi:1028:2:2000
    a=multipoint:1
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 16390 RTP/AVP 12 3 0
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:2068315427
    m=video 16388 RTP/AVP 126 34
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 0 rules 30:176:144
    a=framerate:20
    a=RTCP:AUDIO 16391 VIDEO 16389
    a=pogo
    a=fmtp:126 imagesize 0 rules 20:160:120:640:480
    a=rtpID:1018408702
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [INVITE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP m.0:14600;branch=z9hG4bK7b8f82da4c74ef57
    Max-Forwards: 70
    To: "u0" <sip:[email protected]>
    From: "[email protected]" <sip:[email protected]>;tag=1941240426
    Call-ID: ad6e396e-7abb-11dc-b8cb-f185810c13c4@lip
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:14600>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 531
    v=0
    o=surfer081890 0 0 IN IP4 m.0
    [email protected]
    c=IN IP4 m.0
    b=AS:1528
    t=0 0
    a=hwi:1028:2:2000
    a=multipoint:1
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 14615 RTP/AVP 12 3 0
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:2068315427
    m=video 14613 RTP/AVP 126 34
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 0 rules 30:176:144
    a=framerate:20
    a=RTCP:AUDIO 14616 VIDEO 14614
    a=pogo
    a=fmtp:126 imagesize 0 rules 20:160:120:640:480
    a=rtpID:1018408702
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [INVITE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP m.0:14600;branch=z9hG4bK7b8f82da4c74ef57
    Max-Forwards: 70
    To: "u0" <sip:[email protected]>
    From: "[email protected]" <sip:[email protected]>;tag=1941240426
    Call-ID: ad6e396e-7abb-11dc-b8cb-f185810c13c4@lip
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:14600>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 531
    v=0
    o=surfer081890 0 0 IN IP4 m.0
    [email protected]
    c=IN IP4 m.0
    b=AS:1528
    t=0 0
    a=hwi:1028:2:2000
    a=multipoint:1
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 14615 RTP/AVP 12 3 0
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:2068315427
    m=video 14613 RTP/AVP 126 34
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 0 rules 30:176:144
    a=framerate:20
    a=RTCP:AUDIO 14616 VIDEO 14614
    a=pogo
    a=fmtp:126 imagesize 0 rules 20:160:120:640:480
    a=rtpID:1018408702
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [INVITE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP m.0:14600;branch=z9hG4bK7b8f82da4c74ef57
    Max-Forwards: 70
    To: "u0" <sip:[email protected]>
    From: "[email protected]" <sip:[email protected]>;tag=1941240426
    Call-ID: ad6e396e-7abb-11dc-b8cb-f185810c13c4@lip
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:14600>;isfocus
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 531
    v=0
    o=surfer081890 0 0 IN IP4 m.0
    [email protected]
    c=IN IP4 m.0
    b=AS:1528
    t=0 0
    a=hwi:1028:2:2000
    a=multipoint:1
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 14615 RTP/AVP 12 3 0
    a=rtpmap:3 GSM/8000
    a=rtpmap:0 PCMU/8000
    a=rtpID:2068315427
    m=video 14613 RTP/AVP 126 34
    a=rtpmap:126 X-H264/90000
    a=rtpmap:34 H263/90000
    a=fmtp:34 imagesize 0 rules 30:176:144
    a=framerate:20
    a=RTCP:AUDIO 14616 VIDEO 14614
    a=pogo
    a=fmtp:126 imagesize 0 rules 20:160:120:640:480
    a=rtpID:1018408702
    @:0 type=2 (00000000/22)
    [VCVIDEO_HOSTATTEMPT]
    [6]
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [SIP/2.0 200 OK
    Via: SIP/2.0/UDP m.2;branch=z9hG4bK3ff20c605b9ececc
    To: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    From: "u0" <sip:[email protected]>;tag=55614986
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:14600>
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 414
    v=0
    o=surfer081890 0 0 IN IP4 m.0
    s=u0
    c=IN IP4 m.0
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2000
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 14607 RTP/AVP 12
    a=rtcp:14608
    a=rtpID:-291211226
    m=video 14605 RTP/AVP 126
    a=rtcp:14606
    a=rtpmap:126 X-H264
    a=RTCP:AUDIO 14608 VIDEO 14606
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480
    a=framerate:20
    a=rtpID:-786432875
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [SIP/2.0 200 OK
    Via: SIP/2.0/UDP m.2;branch=z9hG4bK3ff20c605b9ececc
    To: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    From: "u0" <sip:[email protected]>;tag=55614986
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:14600>
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 414
    v=0
    o=surfer081890 0 0 IN IP4 m.0
    s=u0
    c=IN IP4 m.0
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2000
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 14607 RTP/AVP 12
    a=rtcp:14608
    a=rtpID:-291211226
    m=video 14605 RTP/AVP 126
    a=rtcp:14606
    a=rtpmap:126 X-H264
    a=RTCP:AUDIO 14608 VIDEO 14606
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480
    a=framerate:20
    a=rtpID:-786432875
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [SIP/2.0 200 OK
    Via: SIP/2.0/UDP m.2;branch=z9hG4bK3ff20c605b9ececc
    To: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    From: "u0" <sip:[email protected]>;tag=55614986
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:14600>
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 414
    v=0
    o=surfer081890 0 0 IN IP4 m.0
    s=u0
    c=IN IP4 m.0
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2000
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 14607 RTP/AVP 12
    a=rtcp:14608
    a=rtpID:-291211226
    m=video 14605 RTP/AVP 126
    a=rtcp:14606
    a=rtpmap:126 X-H264
    a=RTCP:AUDIO 14608 VIDEO 14606
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480
    a=framerate:20
    a=rtpID:-786432875
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [SIP/2.0 200 OK
    Via: SIP/2.0/UDP m.2;branch=z9hG4bK3ff20c605b9ececc
    To: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    From: "u0" <sip:[email protected]>;tag=55614986
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:14600>
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 414
    v=0
    o=surfer081890 0 0 IN IP4 m.0
    s=u0
    c=IN IP4 m.0
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2000
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 14607 RTP/AVP 12
    a=rtcp:14608
    a=rtpID:-291211226
    m=video 14605 RTP/AVP 126
    a=rtcp:14606
    a=rtpmap:126 X-H264
    a=RTCP:AUDIO 14608 VIDEO 14606
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480
    a=framerate:20
    a=rtpID:-786432875
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [SIP/2.0 200 OK
    Via: SIP/2.0/UDP m.2;branch=z9hG4bK3ff20c605b9ececc
    To: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    From: "u0" <sip:[email protected]>;tag=55614986
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:14600>
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 414
    v=0
    o=surfer081890 0 0 IN IP4 m.0
    s=u0
    c=IN IP4 m.0
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2000
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 14607 RTP/AVP 12
    a=rtcp:14608
    a=rtpID:-291211226
    m=video 14605 RTP/AVP 126
    a=rtcp:14606
    a=rtpmap:126 X-H264
    a=RTCP:AUDIO 14608 VIDEO 14606
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480
    a=framerate:20
    a=rtpID:-786432875
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [SIP/2.0 200 OK
    Via: SIP/2.0/UDP m.2;branch=z9hG4bK3ff20c605b9ececc
    To: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    From: "u0" <sip:[email protected]>;tag=55614986
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:14600>
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 414
    v=0
    o=surfer081890 0 0 IN IP4 m.0
    s=u0
    c=IN IP4 m.0
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2000
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 14607 RTP/AVP 12
    a=rtcp:14608
    a=rtpID:-291211226
    m=video 14605 RTP/AVP 126
    a=rtcp:14606
    a=rtpmap:126 X-H264
    a=RTCP:AUDIO 14608 VIDEO 14606
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480
    a=framerate:20
    a=rtpID:-786432875
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [SIP/2.0 200 OK
    Via: SIP/2.0/UDP m.2;branch=z9hG4bK3ff20c605b9ececc
    To: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    From: "u0" <sip:[email protected]>;tag=55614986
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:14600>
    User-Agent: Viceroy 1.2
    Content-Type: application/sdp
    Content-Length: 414
    v=0
    o=surfer081890 0 0 IN IP4 m.0
    s=u0
    c=IN IP4 m.0
    b=AS:2147483647
    t=0 0
    a=hwi:1028:2:2000
    a=bandwidthDetection:YES
    a=iChatEncryption:NO
    m=audio 14607 RTP/AVP 12
    a=rtcp:14608
    a=rtpID:-291211226
    m=video 14605 RTP/AVP 126
    a=rtcp:14606
    a=rtpmap:126 X-H264
    a=RTCP:AUDIO 14608 VIDEO 14606
    a=fmtp:126 imagesize 0 rules 20:640:480:640:480
    a=framerate:20
    a=rtpID:-786432875
    @:0 type=2 (00000000/0)
    [VCVIDEO_INCOMINGATTEMPT]
    [3]
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [SIP/2.0 180 Ringing
    Via: SIP/2.0/UDP m.2;branch=z9hG4bK3ff20c605b9ececc
    To: "[email protected]" <sip:[email protected]:14600>;tag=2001085195
    From: "u0" <sip:[email protected]>;tag=55614986
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 INVITE
    Contact: <sip:[email protected]:14600>
    User-Agent: Viceroy 1.2
    Content-Length: 0
    @SIP/Transport.c:1218 type=1 (00000000/0)
    [SIP/2.0 100 Trying
    Via: SIP/2.0/UDP m.2;branch=z9hG4bK3ff20c605b9ececc
    To: "[email protected]" <sip:[email protected]:14600>
    From: "u0" <sip:[email protected]>;tag=55614986
    Call-ID: a92345de-7abb-11dc-a5aa-bb26808d13c4@192-168-1-101
    CSeq: 1 INVITE
    User-Agent: Viceroy 1.2
    Content-Length: 0
    Video Conference User Report:
    Binary Images Description for "iChat":

    Hi,
    The log points to the ports going all over the place and some ports are not even iChat ones.
    This would normally be caused by going though tow routing devices.
    How and through what and how many methods are you connected to the internet ?
    9:18 PM Monday; October 15, 2007

  • Hello, my iPhone 4s is worked properly but videos and audios sound is not worked, earphone sound is good, pls help.

    hello sir,
    my iphone 4s is good cundition and properly worked, but vedeios and audios sound is bug. earphone sound is good,
    running condition in videos and audios ringer volium butten is not worked.
    pls help me.
    Aazam Shahab
    Mumbai, India
    [email protected]

    Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • Audio in and audio out is not working in imac after i install lion 10.7

    i have a imac i update my mac to lion 10.7
    after that i open grageband and it sayes no adieo in and out are found
    and i also loke in the grageband preference  and i loke in Audio /MIDI
    and audio output say no drive found and in is same thing
    but on MIDI Status it sayes 1 midi input found
    enebody know what will be the problem

    Hi gusto,
    I checked the above mentioned KB and the fix that worked for you is in the KB: https://help-internal.adobe.com/content/help/en/creative-suite/kb/acrobat-failed-launch-30 -days.html
    Try running the patch again and see if that helps.
    Regards,
    Rave

  • Audio jack is not working

    I have bought a blackberry z10 4 days ago.When I test the headset on another phone it is working fine
    But when I put it into my phone it doesn't respond.i have followed many ways
    ..pls guys any suggestions......I want my z10 to be perfect......pls help
    Solved!
    Go to Solution.

    Well, your phone is still under warranty. I suggest you take it back and either have it fixed or have it replaced.

  • The right chanel in the audio jack is not working in my iphone4.

    Does anyone have an idea what can it be?

    yeep, tryed that already.and the headphons are fine.don't know what the **** can it be..

  • My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

    My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

    There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
    This has been a fairly common problem, but in most cases it is easily cured as described above.

Maybe you are looking for

  • Reconciliation - mont end

    hi, How do we do reconcilisation for clearing account at month end? Eg: GR/IR - how do we manintan open items at month end please explan me

  • Error While Installing Oracle On Linux Red Hat.

    Hi, For the last two days, I am trying to install Oracle 9i on Linux Redhat, but no vail. This is the error I come across-- "Initializing Java Virtual Machine From /tmp/OraInstall0/jre/bin/jre. Please wait... :symbol errno. version GLIBC-2.0 not defi

  • Tiff 8 or 16 bit

    hi, is there a way to realize when a scanned tiff file is saved as 8 or 16 bit? thanks!

  • Trackpad will not scroll - Settings?

    I have a late 2008 MacBook. Under the last OS (Lion) and the current OS (Mountain Lion), my trackpad registers all gestures EXCEPT scrolling. After updating, the MacBook loaded an alternate account. Scrolling worked on that account! When I switched b

  • How to clear CAN Frame Cache

    I'm using CAN Frame API and I keep reading the same data, how can I clear the CAN cache? Or is there a way to look at the most recent messages?