Speaker and headphone problem dv7

My sound driver may be broken. Whenever I am using skype idf I get a message or in a call, my speakers blast every other sound playing but I want it all to go to my headohones at the same time. Help?

@SapphiraDragon ,
Hello and thank you for posting on the HP support forums. So that I can better help you with your sound issue could you please post back with your full model and product number. This link will help you with finding this information.
How Do I Find My Model Number or Product Number?
Please post back as soon as you can.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Similar Messages

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
This has been a fairly common problem, but in most cases it is easily cured as described above.

I've updated my ipad to iso7 now the sound is distorted through the speaker and headphones, it is unusable! Is anyone else having this problem?

I've updated my ipad to iso7 now the sound is distorted through the speaker and headphones, it is unusable! I wouldn't dare to update my iphone. Is anyone else having this problem? Can't seem to find any fixes online?

A reset should fix it:
Double click the Home button. Slide up with one finger on ALL your apps to close them.
Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
This will reset your device without erasing data, apps or settings.

My new iPhone 4S has hearing problem.speaker and headphone works very good.However using handset to make and receive calls I cannot hear anything?I did restore the phone and removed the plastic.Is there any solution to this problem please?

I am having heraing problem with iPhone 4S.Speaker and headphone works well.No echo.When I use handset to receive or make calls,I can't hear anything?I restore the phone and removed the plastic as well.Is there anyway to fix this problem?

I personally haven't experienced much of the "reverberation/feedback" when using a headset on the i4S...
Yes, I have near-perfect hearing too (for scope, squeaky brakes hurt my ears) I come from many conversations on many phones and types and first off, CDMA technology is great for coverage, terrible for voice quality. HD Voice in Europe made for some of the best phone conversations I've ever had.
Back on track, feedback is most noticable (similar to the landline phone) when using the iPhone without a headset, but for me it's not an absolute criticality mainly because I use VoIP apps alot, so maybe it has desensitized me some over the past year.
But whenever I'm on a call, and the other person has me on speakerphone, I have alot of trouble talking because of the feedback loop caused. So the less of my voice I hear the better I can talk.
Have you tried a bluetooth headset yet?

Both Portege R700 speaker and Headphone makes sound

Hi,
My name is Anbu, I am using Portege R700 Series. I am facing a strange problem
When i am using head phone for listening (I am plugging only speaker pin - Green colour), it works properly i.e i am hearing sound from head phone only.
If I *plug both Mic & speaker pin* of the headphone (Both Red & green colour pin) into the respective slots, both *laptop speaker and headphone speaker makes sound.* Ideally only +head phone should work, not laptop speaker+
Help me in finding the what is the problem behind this & how to resolve
Regards
ANBU

Hi mate
Please check the settings in the +control panel -> sound -> recording tab+
Click right and mark the options: enable hidden devices and enable disabled devices
Then you should be able to get the properties of mic and stereo mix
Play around with all the available options.
<img src='http://img97.imageshack.us/img97/9074/captureyeb.png' width='550px'>

Speaker and headphones stop working on mac book pro?

Why does my speaker and headphones randomly stop working on my mac book pro? It wont work again until I restart my computer.

What model identifier is your MacBook Pro? To see this, hold the Option key and choose "System Information" from the Apple menu, and then click "Hardware" (this should be selected by defualt) followed by noting the Model Identifier which should be something like "MacBookPro6,2."
Does the system properly wake from sleep if you boot it to Safe Mode (hold the Shift key at startup to do this)?

Sound is playing both on speaker and headphone

I have HP ENVY 15-j048tx Notebook PC. when attach heaphone to my laptop the sound is playing both on speaker and headphone. How to solve this please help.
Thank you.

Hello Dev2810,
Welcome to the HP Forums!
I understand the notebook produces sound from both headphones and speakers. I will do my best to assist you! The only troubleshooting I could suggest in this thread: Headphones plugged in, but speakers are still playing sound
I provided these steps a while ago I noticed it resolved all instances of this issue, when done properly. Please try the steps and let me know what happens. Thanks!
Mario
I worked on behalf of HP.

Back to back scratch noises from speaker and headphone jack, very faint

I'm having a headphone/speaker issue, but it is very difficult to describe. When I use my computer, the speakers or headphones (if plugged in) will occasionally emit two quick scratchy noises back to back. The speakers and headphones work great, but I can't figure out what the noises are. They sound kinda like if you were to gently scratch the macbook pro casing with your fingernail. Any ideas as to what can cause it to happen?

it seems that m1r3k found a very good workaround, at least for the Mid 2010 Mac mini models (that I'm using right now). I don't know if it works also with more recent Mac mini models.
Re: After upgrading to lion, cant select HDMI sound setting
Open Audio MIDI Setup.app in /Applications/Utility, click the + (plus) button in the bottom left corner of the window and choose "Create Multi-Output Device". In the new device settings tick the HDMI "Use" checkbox and you're done. Simply go to the usual System Preferences Audio panel and choose the newly created device, without the need to unplug the audio cable from the back of the Mac mini. You can also name the new audio device as you want.
NOTE:
This is only a workaround for a deliberate choice made by Apple on OS X Lion 10.7.2 and beyond:
Mac mini: About HDMI audio and headphones
Please let Apple know (here or here) how this has made things unnecessary awkward for users and needs to be fixed (these forums don't count, they are not read by Apple's employees)!

Sound Output - Internal Speaker and Headphone Jack?

I just installed my new iMac, which replaced my Mac Mini. I hook my Mac to my stereo via the headphone jack for playing iTunes. But most of the time I don't have the stereo on.
is there a way to keep the headphone jack plugged in and still have audio come out the internal speaker? Basically send audio output to both the internal speaker and the headphone jack at the same time?
On the Mac Mini this wasn't an issue because I had a splitter that ran from the mini to my monitor speakers and to my stereo.
Thanks!

Hi, you can get the internals to give notice of emails & actions..externals for any other sound..
Sadly your wishes on this matter will not come to fruition...L

Have to change setting each time for speaker and headphone

speaker and earphone are working properly but if speaker is connected then i insert my earphone it doesnt work and then i have to go change the setting to headphone then when i unplugge the headphone i have to change the setting to speaker

HP Pavilion 14-E006tu Laptop (3rd Gen Intel Core I5 3230M - 4GB - 500GB - 14" - Windows 8)
Sparkles1 wrote:
Hi daneil_dan,
Welcome to the HP forum!!
For you to have the best experience, I would like to direct your attention to Learn How to Use the Forum and More.
I understand that you would like some assistance with your audio settings. Would you provide me some additional information? The exact model of computer you have and the operating system. How Do I Find My Model Number or Product Number?
Sparkles1 wrote:
Hi daneil_dan,
Welcome to the HP forum!!
For you to have the best experience, I would like to direct your attention to Learn How to Use the Forum and More.
I understand that you would like some assistance with your audio settings. Would you provide me some additional information? The exact model of computer you have and the operating system. How Do I Find My Model Number or Product Number?
HP Pavilion 14-E006tu Laptop (3rd Gen Intel Core I5 3230M - 4GB - 500GB - 14" - Windows 8)

Sound does not switch between speaker and headphone after audio driver update

I have a dv9843cl. I downloaded and installed the latest audio driver (Realtek High Definition Audio Driver, version 6.0.1.5548A). But the laptop is not able to switch back and forth between laptop audio and headphone audio. Whenever I plug in my headphone, the sound would play from the laptop instead of the headphone. I have to manually set the headphone to default in order for it to work. How do I fix it to make the laptop recognize the headphone for it to switch automatically? Thanks

Hi,
Uninstall Your current audio driver.
Resources:
Uninstall or change a program in Windows Vista
Install latest driver:
Realtek HD audio here
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Sound through speaker and headphones

The sound from my Nano 5th generation comes through the speakers and headphones simultaneously. I have tried 3 sets of headphones
and the plug goes fully into the socket atr the base of the Nano.
This happened initially over 11 months ago and seem to rectify itself, but now it's back. Any thoughts about how I can resolve this.
Thank you.

A reset should fix it:
Double click the Home button. Slide up with one finger on ALL your apps to close them.
Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
This will reset your device without erasing data, apps or settings.

Speaker and headphone jack problem

I have had my pavilion dv6 for about a year n it hasn't given me any problems till of late..my pc speakers don't work when I remove my headphones from the jack so the sound only works when I put in the headphones..
Pliz help me out!!!

There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
This has been a fairly common problem, but in most cases it is easily cured as described above.

Both left speaker and headphone output not working

I noticed a week ago that the left headphone audio output wasn't working, and shortly after I realized that my left speaker wasn't working either. I thought maybe it was a matter of updating some software, but everything is up to date. Anyone encouter this problem before?

Solved my own problem,
System preferences - sound- output- balance.
Strange thing is I don't recall adjusting those settings. Hope this is helpful to anyone else who has this issue!

X6 and headphones problem

My X6.00/32 (V21.0.0004) does't recognize headphones. When I insert phones into the jack and press "headphones" choice it gives me stupid message "use telephone's microfon", so I can't use radio. I have tried different headphones and played with settings, I can hear some clicks and noise but radio Is dead and does't work. Player does not work. Without headphones everything works perfectly and loud. Help with solutions! Hardware problem? Nokia service repaire?
Moderator's note: Email address removed. It is not wise to publish your personal information on a public forum.

111111111111111 wrote:
My X6.00/32 (V21.0.0004) does't recognize headphones. When I insert phones into the jack and press "headphones" choice it gives me stupid message "use telephone's microfon", so I can't use radio. I have tried different headphones and played with settings, I can hear some clicks and noise but radio Is dead and does't work. Player does not work. Without headphones everything works perfectly and loud. Help with solutions! Hardware problem? Nokia service repaire?
Moderator's note: Email address removed. It is not wise to publish your personal information on a public forum.
The message 'use phone microphone' is a standard message that the phone displays when you plug headphones in. It's just the phone telling you that your headphones don't have an included mic. so you still have to use the phone to speak into with the headphones fitted. That's normal.
As Jimmy has stated, if the headphones are recognised properly by the phone then you should see a little headphones icon on the homescreen near the battery strength indicator.
The FM radio reception in most Nokia handsets that I've had in the past isn't that brilliant to be honest and the X6 is no exception. You have to be in a really strong signal area just to be able to pick up major stations. One trick to try is scanning manually for a station in 0.5 MHz steps instead of scanning automatically up the frequencies for a station.
If you feel the phone has a fault and since you have tried a number of different headphones then you may want to take the phone to a Nokia Care Centre just for them to check it over. My gut feeling is that they won't find a problem, although there's no harm in getting it checked out and giving you peace of mind.
S.
History: Motorola MR30, Nokia: 7110, 7650, N70, N80, N82, X6 (32GB), Samsung Galaxy SII
Current: Samsung Galaxy Note3 Black

Speaker and headphone problem dv7

Similar Messages

Maybe you are looking for