Speaker Calibration Wizard not working at a

Hi all,
I've just recently purchased a second-hand Audigy 2 ZS Platinum Pro. I've downloaded the Audigy 2 ZS Series driver disc (courtesy of a poster on this forum) and installed all fo the software from there. I have also updated the main windows driver, to the latest version availiable from the Creative site.
Everything is hunky-dory thus far, however i have found one issue with the software. Whenever i try to start the "Calibrate Speakers" wizard in the "Speaker Settings" page, nothign happens. There is a brief flicker of activity form the HDD, and then it stops? I've tried reinstalling the "Speaker Calibration" software from the driver disk, but that hasnt solved anything.
As always, any ideas or thoughts would be greatly appreciated.
Cheers
--Jakk

Hi all,
I've just recently purchased a second-hand Audigy 2 ZS Platinum Pro. I've downloaded the Audigy 2 ZS Series driver disc (courtesy of a poster on this forum) and installed all fo the software from there. I have also updated the main windows driver, to the latest version availiable from the Creative site.
Everything is hunky-dory thus far, however i have found one issue with the software. Whenever i try to start the "Calibrate Speakers" wizard in the "Speaker Settings" page, nothign happens. There is a brief flicker of activity form the HDD, and then it stops? I've tried reinstalling the "Speaker Calibration" software from the driver disk, but that hasnt solved anything.
As always, any ideas or thoughts would be greatly appreciated.
Cheers
--Jakk

Similar Messages

  • What happened to the Speaker Calibrator Wizard from the Audigy 2?, why is it Go

    Hi, there I know the X-fi has a Speaker Calibrator Wizard in the thx section as in the audigy 2, however the part where there is the basic and advanced calibration options that guide you to calibrating your system aren't there. Also the surround mixer on the audigy 2 isn't there where you can control the levels of all 7. speaker channels, ie move the surround channels to half way up and down.
    I really miss this feature, and can anyone from Creative support give me a link to get the software back. I currently have the x-fi elite pro and I really want to calibrate my speakers using that utility.

    If any of you are unfamilar with this, note that in the thx setup console in the audigy 2 there were some options, in which creative had a choice of either basic or advanced calibration. The x-fi doesn't have that option.

  • HT1688 I have a speaker that is not working

    It has been less than a year and I have a speaker that is not working on my phone. How do I get this problem resolved?

    If you are referring to the speaker at the bottom of the phone, there is 1 speaker, one microphone. Otherwise contact Apple for repair or replacement under warranty.

  • MY EXTERNAL SPEAKER PORT IS NOT WORKING for hp envy

     MY EXTERNAL SPEAKER PORT IS NOT WORKING .WHEN I CONNECTED TO A EXTERNAL SPEAKER ,THERE WERE NO SOUND AUDIBLE.SO WHEN I DISCONNECTED THE CABLE FROM PORT,I WAS ABLE TO HEAR WITH THE IN BUILT SPEAKERS.EXTERNAL SPEAKER IS I GOOD CONDITION.I CHEKED WITH MY HEAD SET ALSO.IT WAS NOT AUDIBLE.MY LAP IS HP ENVY .KINDLY HELP

    Hi ano87, welcome to the HP Forums. What is the model or product number? What version of Windows is installed?
    Guide to finding your product number
    Which Windows operating system am I running?
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Blackberry 9870 Email Account Setup Wizard not working

    i have Balckberry 9870 and I am trying to setup an email account, but into setup wizard, E-mail setup wizard not working. please help

    pankajmaniyar wrote:
    Thanks Ira :-) I will try to reload the operating software and than see, if the problem resolved or not.
    Before you reload your OS I suggest you call your carrier first. This could be an issue on their end, it may be caused if your carrier  has not correctly provisioned the BlackBerry smartphone for BlackBerry data services.
    Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

  • Camera wizard Not Working

       Camera Wizard Not Working(Without iTunes Installed System/3rd Party System),
    Step1:Connected Data-Cable Iphone to PC
    Step2:select Trust Option On mY iPhone4
    Step3:Select option MS Scanner And Wizard on My PC
    Result On Display:
    iPhone Response- Reconnected and Disconnected(Repeated) Automatically......ie once i connected
    *I'll Try Master Reset iPhone(Home Walk/button Together Press),Switch OFF and back ON My iPhone,Try to other Data cable and other Computer Still Problem was Not solved .

    If you've tried a different cable, a different USB port and a different computer, then your iPhone likely has a hardware issue.
    Create a backup to iCloud or iTunes, then restore your device as new.  Take a new picture, and see if you can import it.  If not, then you need to get your iPhone serviced.

  • HT4623 i cann't reset my iphone the phone speaks arabic touch not working properly

    i cann't reset my iphone the phone speaks arabic touch not working properly

    Triple tap the home button to turn off VoiceOver.

  • MY LAPTOP SPEAKER & WEB CAMERA NOT WORKING

    DEAR SIR/MAM,
    LAPTOP: HP COMPAC Presario F700
    Sl No:CNF812576M
    P/No:kp171PA#ACJ
    1.laptop speaker not working
    2.Web camera photos cant to save to any drives.
    pls reply me to solve the problems.
    Regards,
    sureshkumar s
    salem

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP 15-r250tu Notebook and issues with the WebCam and Nokia phone. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that might need updating.  Here is a link to troubleshoot the Webcam in Windows 8.1. I would uninstall the software for the Webcam and download it from the document on how to reinstalling the original webcam program that came with your computer. Figure 2: Drivers and Applications Reinstall. Here is a link to help with the Nokia phone. They are the best suited to help troubleshoot their device and they would be happy to help you out. I hope this helps. Thanks.

  • EVDRE wizard not working.

    Hi,
    we have 2 identical clients (pc). We are running SAP BPC 7.50.05.1004 and Office 2010 on both.
    The problem is that the EVDRE wizard works on one of the clients, but not the other. The one not working simply generates a evdre report without the wizard.
    Any ideas/suggestions ?
    Thank you,
    Joergen

    Hi,
    not entirely correct.
    Sap Note #1513080
    "Currently only BPC 7.5 NW SP05 and above support Office 2010
    Note: BPC NW 7.5 NW cannot work on office 2010 (64-bits), office 2010 (64-bits) is not supported
    Other support MS Office versions for BPC 7.0 NW and BPC 7.5 NW are MS Office 2003 or MS Office 2007"
    Regards
    Joergen

  • NI Goop Wizard not working with LabVIEW 2009

    I have added the NI Goop Wizard using VIPM (VI Package Manager) into my LabVIEW 2009 SP1 installation however it is not working. Whenever I select Create New Class from the drop down (same applies to menu selection) nothing happens and the drop down returns to it's default selection. I have tried this on 2 PC's both with 2009 SP1 installed, both exhibit the same unwanted behaviour. One of the PC's also has LabVIEW 8.2.1 installed also with NI GOOP Wizard and this installation works fine.
    Anybody using GOOP Wizard with 2009 ?
    Cheers
    Chris
    Don't forget to give Kudo's for a good answer !
    LabVIEW Champion
    Certified LabVIEW Architect
    Certified TestStand Architect

    Hi there Chris,
    Off the top of my head it's my understanding that NI GOOP wizard is legacy software that was made redundant by the native GOOP tools in LabVIEW 8.2.0 and later.
    In light of this it's a bit confusing that everything is working fine with 8.2.1 for you. Is there a version to the NI GOOP Wizard that you are using?
    I had a search across the website but I'm afraid I haven't found any other examples or poeple using the GOOP Wizard in LabVIEW 2009 or 2010.
    Kind Regards.
    Rhys
    Applications Engineer
    National Instruments

  • Sound Blaster Z Speaker/Headphone switch not working

    I have had my soundblaster for 6 months and everything has worked great.
    After a recent driver update (I have already tried rolling back the driver) I found that my speaker/headphone switch does not work properly. It enables the headphones but doesn't disable the speakers. I use the optical out on my card and it has worked flawlessly until now.
    Suggestions?

    Remove the old drivers (carefully) in Safe Mode and install the new drivers in Normal Mode.

  • My speaker is also not working. Sound is turned and is on. I can not hear my phone ring or the music play. Help!!!!

    Does anyone see my question?

    The speaker is not working when I put a call on the speaker.

  • My speaker phone is not working on my iPhone 4

    The speaker phone on my iPhone 4S just stopped work.  I am not able to listen to music except when using my headphones. I have tried putting my headphone jack in and out of my phone, resetting the phone and using canned air in the jack. Nothing seems to work

    Hello, sunandfungal. 
    Thank you for visiting Apple Support Communities.
    Here is an article I would recommend taking a look at.  Try all of the steps in this article and if you are still experiencing the issue, see step 9.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Cheers,
    Jason H.

  • Side, back and middle speaker on t7700 not working, please help

    I have had this speaker system for a little while, and it has worked great. Recently the side speakers stopped working, so i unplugged everything, and messed around with some settings. When i plugged it back in it worked fine for about a week or two. Now none of the speakers work, except for the font right and front left. Please help. I tried going to the creative mediasource, and turning on cmss or something, and i couldn't find where to do it. i also tried accessing the eax control panel, but i can't find it under my programs. Please tell me how to make the speakers work. I have a Audigy 2 zs sound card.

    I suspect it's due to the CMSS and not the speaker. The EAX console are located in Start -> Program -> Creative -> Sound Blaster Audigy 2 ZS -> Creative EAX Console.
    If you still can't find it, I would suggest reinstalling from the CD.
    Jason

  • Sharepiont Content Deployment Wizard not working on SP 2013

    Hi, I was wondering if someone else has come across this issue. I was trying to use the SharePoint Content Deployment Wizard on SharePoint 2013. However, when I launch the product, I receive the following error: "SpContentDeployment
    Wizard has stopped working". Is there anything i can do in this case to get the sofware to work in my environment? Here is the output from the details section: 
    Description: 
    Stopped working 
    Problem signature: 
    Problem Event Name: CLR20r3 
    Problem Signature 01: spcontentdeploymentwizard.exe 
    Problem Signature 02: 4.0.1.0 
    Problem Signature 03: 4ba7fc57 
    Problem Signature 04: SPContentDeploymentWizard 
    Problem Signature 05: 4.0.1.0 
    Problem Signature 06: 4ba7fc57 
    Problem Signature 07: f7 
    Problem Signature 08: f1 
    Problem Signature 09: System.IO.FileNotFoundException 
    OS Version: 6.2.9200.2.0.0.272.7 
    Locale ID: 4105 
    Read our privacy statement online: 
    http://go.microsoft.com/fwlink/?linkid=190175 
    If the online privacy statement is not available, please read our privacy statement offline: 
    C:\Windows\system32\en-US\erofflps.txt 
    thanks,
    Sherazad

    Hi,
    You can download the source code from codeplex, then build the solution.
    If the issue still exists, you can debug the source code or you can post the issue to the
    ISSUES, you will get more help and confirmed answers from there.
    http://spdeploymentwizard.codeplex.com/workitem/list/basic
    Best Regards
    Dennis Guo
    TechNet Community Support

Maybe you are looking for

  • Add number of records to a field

    I need to load data in BW ODS from flat file and want to populate one field ROWID which will hold record numbers starting from 1 if ODS is empty. This ROWID in ODS is used as Key field. I want to populate this ROWID based on number of records in flat

  • Non-Admin User Account Desktop is all messed up..graphically...HELP!

    This issue is difficult to explain, but here it goes... I have 2 users (desktops) setup on Lion.  My primarydesktop is the Admin account and my wife has her own (for her iTunes,mail, etc.).  Until just recently, I could switch between users easilyand

  • Ios 6 update how do i get my contacts back???

    how do i get my contacts back after the ios6 update?

  • Where is the refresh button?

    Hi there, i am new to using firefox, i will look thru some of the tutorials. I wondered where the refresh button is? i have ticked all the view toolbars - menu, nav etc thanks.

  • After the iOS 5.1.1 update,I can't connect to Bluetooth on our iPads

    SInce the iOS 5.1.1 update I can no longer connect to our Bose Sounddock via Bluetooth on both of our iPads.  I can still connect to the Sounddock via bluetooth with my iPhone as I have not completed the iOS upgrade. The speaker still works because i