Speaker crackles while calling firmware 2.2

Have any of you had a problems with a crackling noise while calling since the 2.2 update?
I think I have this problem since I've updated to 2.2, but i'm not sure.
I do not have the crackling sound when using the "speaker" function so it probably isn't a problem with the cellular network.

Try the following troubleshooting steps:
Hard reset - press home and sleep/wake buttons simultaneously until the Apple icon appears (ignore the red slider).
Restore in iTunes to a backup.
Restore as "New iPhone"
If it still happens there is a defect in your phone and you need to take it to an Apple store Genius Bar.

Similar Messages

My 4s Goes to speakerphone automatically while calling and does not go back to normal even after disabling speaker while calling

My 4s Goes to speakerphone automatically while calling and does not go back to normal even after disabling speaker phone button
AlsO sometimes I. Cannot hear anything in normal speaker even though the call Is going through and has been re ieved on the other end, I have to enable speaker and then disable it to route audio to normal speakers

I think that it is something wrong with kernel and graphic drivers but i'm not able to solve it from the beginning of using of Arch by me.
I'm not so sure this issue is software-related only because in my case it seems the laptop screen enters power-saving mode (10-min timeout) on its own without any events logged (as shown by dmesg) so my next thought was OK, I'm going to get rid of this issue disabling the screen power-saving timeout in the BIOS and set it to never power down or something like that and from then on managing power mode manually; ie: when I want to power down I will just use systemctl suspend/hibernate which work fine ... problem is: there are no related options in my BIOS for such timeout.
The only timeouts I have are in /etc/systemd/logind.conf set to 30min (#IdleActionSec) (commented) by default so these are not in effect because the screens goes blank after 10m which is less than the (default) 30m in logind. Maybe setting loggind to 9m (un-commented) to catch the event before the machine-default one ?
IdleActionSec=9min
IdleAction=suspend
Will check it and report back.

Signal-noise while calling

Hi,
I have the problem, that i can hear the signal noise between iPhone and transmitting pole (the noise that you can hear when you get to close to a loudspeaker with your mobile phone). I can hear the noise all the time when i'm doing a phone call.
The guy at the support hotline was asking if this problem is already known and then he told me that this is normal für the iPhone 4 and he said that my hearing seems to be good, because i can hear the noise o.O
I tested iPhone 4 and iPhone 3gs at the same time and in the 3gs there was nothing to hear.
Does anybody else have this problem?

Hey guys, same thing with my iphone 4..
signal noise while calling while not having a 3G connection.. (and sometimes even when the call ended, the ear speaker is still buzzing)
Anyways; if it's a software issue: 8 sept. maybe fixed in the expected update or wait till the 30th, when (as rumors go) a new iphone 4 will ship; without antenna issues..
By the way; are we the only ones having this problem? Or are we the only ones noticing it? Anyone tested it with iphone-4-friends?
gtz!

Macbook air: i dont want my friend to hear what i am hearing on the computer while calling. i have newest version macbook air with Lion. and while calling someone via skype, i dont want them to hear what im hearing on the computer

title self askes.
macbook air: i dont want my friend to hear what i am hearing on the computer while calling.
i have newest version macbook air with Lion.
and while calling someone via skype, i dont want them to hear what im hearing on the computer such as Itunes, youtube, or whatever comes out of speaker.
samething happends when im using headphones.
i wanna listen to the music or watch youtube video during the call,
but it is almost impossible b/c my gf can hear the sound coming off the computer much louder than my actual voice.
this is not fun.

You are not going to be able to run your old system from the backup on this old computer as the hardware is incompatible.
You need to get a new computer or a refurbished one.

Error while calling a method on Bean (EJB 3.0)

I am getting an error while calling a method on EJB. I am using EJB3.0 and my bean is getting properly deployed(i am sure b'cos i can see the successfullly deployed message). Can any body help me
Error is -->
Error while destroying resource :An I/O error has occured while flushing the output - Exception: java.io.IOException: An established connection was aborted by the software in your host machine
Stack Trace:
java.io.IOException: An established connection was aborted by the software in your host machine
at sun.nio.ch.SocketDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:33)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:302)
at com.sun.enterprise.server.ss.provider.ASOutputStream.write(ASOutputStream.java:138)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at org.postgresql.PG_Stream.flush(PG_Stream.java:352)
at org.postgresql.core.QueryExecutor.sendQuery(QueryExecutor.java:159)
at org.postgresql.core.QueryExecutor.execute(QueryExecutor.java:70)
at org.postgresql.jdbc1.AbstractJdbc1Connection.ExecSQL(AbstractJdbc1Connection.java:482)
at org.postgresql.jdbc1.AbstractJdbc1Connection.ExecSQL(AbstractJdbc1Connection.java:461)
at org.postgresql.jdbc1.AbstractJdbc1Connection.rollback(AbstractJdbc1Connection.java:1031)
at org.postgresql.jdbc2.optional.PooledConnectionImpl$ConnectionHandler.invoke(PooledConnectionImpl.java:223)
at $Proxy34.close(Unknown Source)
at com.sun.gjc.spi.ManagedConnection.destroy(ManagedConnection.java:274)
at com.sun.enterprise.resource.LocalTxConnectorAllocator.destroyResource(LocalTxConnectorAllocator.java:103)
at com.sun.enterprise.resource.AbstractResourcePool.destroyResource(AbstractResourcePool.java:603)
at com.sun.enterprise.resource.AbstractResourcePool.resourceErrorOccurred(AbstractResourcePool.java:713)
at com.sun.enterprise.resource.PoolManagerImpl.putbackResourceToPool(PoolManagerImpl.java:424)
at com.sun.enterprise.resource.PoolManagerImpl.resourceClosed(PoolManagerImpl.java:393)
at com.sun.enterprise.resource.LocalTxConnectionEventListener.connectionClosed(LocalTxConnectionEventListener.java:69)
at com.sun.gjc.spi.ManagedConnection.connectionClosed(ManagedConnection.java:618)
at com.sun.gjc.spi.ConnectionHolder.close(ConnectionHolder.java:163)
at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.closeDatasourceConnection(DatabaseAccessor.java:379)
at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.closeConnection(DatasourceAccessor.java:367)
at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.closeConnection(DatabaseAccessor.java:402)
at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.afterJTSTransaction(DatasourceAccessor.java:100)
at oracle.toplink.essentials.threetier.ClientSession.afterTransaction(ClientSession.java:104)
at oracle.toplink.essentials.internal.sessions.UnitOfWorkImpl.afterTransaction(UnitOfWorkImpl.java:1816)
at oracle.toplink.essentials.transaction.AbstractSynchronizationListener.afterCompletion(AbstractSynchronizationListener.java:161)
at oracle.toplink.essentials.transaction.JTASynchronizationListener.afterCompletion(JTASynchronizationListener.java:87)
at com.sun.ejb.containers.ContainerSynchronization.afterCompletion(ContainerSynchronization.java:174)
at com.sun.enterprise.distributedtx.J2EETransaction.commit(J2EETransaction.java:467)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:357)
at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3653)
at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3431)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:1247)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:197)
at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:110)
at $Proxy84.addDepartment(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.sun.corba.ee.impl.presentation.rmi.ReflectiveTie._invoke(ReflectiveTie.java:121)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:650)
at com.sun.corba.ee.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:193)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1705)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1565)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:947)
at com.sun.corba.ee.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:178)
at com.sun.corba.ee.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:717)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:473)
at com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1270)
at com.sun.corba.ee.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:479)
End of Stack Trace
|#]
RAR5035:Unexpected exception while destroying resource. To get exception stack, please change log level to FINE.
EJB5018: An exception was thrown during an ejb invocation on [DepartmentSessionBean]
javax.ejb.EJBException: Unable to complete container-managed transaction.; nested exception is: javax.transaction.SystemException
javax.transaction.SystemException
at com.sun.enterprise.distributedtx.J2EETransaction.commit(J2EETransaction.java:452)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.commit(J2EETransactionManagerOpt.java:357)
at com.sun.ejb.containers.BaseContainer.completeNewTx(BaseContainer.java:3653)
at com.sun.ejb.containers.BaseContainer.postInvokeTx(BaseContainer.java:3431)
at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:1247)
at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:197)
at com.sun.ejb.containers.EJBObjectInvocationHandlerDelegate.invoke(EJBObjectInvocationHandlerDelegate.java:110)
at $Proxy84.addDepartment(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)

Means theres an error in XML/ABAP conversion probably due a syntax error...
Regards
Juan

Error while calling a Db2 stored proc using Dataservice

Hi ,
I am getting the following exception while calling a Db2 proc.The proc is not returning any refcursor.It has one Input param of type String.We are expecting the result in resultset. I am able to call the proc using JDBC function and iterate tru the resultset and print it.
While doing import the source Metadata , I Added a "Editable Row Set" Type.
Any clue ?
ava.lang.RuntimeException: Incorrect definition, too many return resultset
     at com.bea.ld.wrappers.procedure.ProcedureAdapter$CallableWrapper.getNextReturnValue(ProcedureAdapter.java:634)
     at com.bea.ld.wrappers.procedure.ProcedureIterator.getNextToken(ProcedureIterator.java:249)
     at com.bea.ld.wrappers.procedure.ProcedureIterator.fetchNext(ProcedureIterator.java:125)
     at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:134)
     at weblogic.xml.query.runtime.sequences.Subsequence.fetchNext(Subsequence.java:106)
     at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
     at weblogic.xml.query.runtime.querycide.QueryAssassin.fetchNext(QueryAssassin.java:54)
     at weblogic.xml.query.iterators.GenericIterator.peekNext(GenericIterator.java:151)
     at weblogic.xml.query.runtime.qname.InsertNamespaces.fetchNext(InsertNamespaces.java:161)
     at weblogic.xml.query.iterators.GenericIterator.next(GenericIterator.java:113)
     at weblogic.xml.query.runtime.core.QueryIterator.fetchNext(QueryIterator.java:127)
     at weblogic.xml.query.iterators.GenericIterator.hasNext(GenericIterator.java:134)
     at weblogic.xml.query.xdbc.util.Serializer.serializeItems(Serializer.java:142)
     at com.bea.ld.server.QueryInvocation.getResult(QueryInvocation.java:461)
     at com.bea.ld.EJBRequestHandler.executeFunction(EJBRequestHandler.java:346)
     at com.bea.ld.ServerBean.executeFunction(ServerBean.java:108)
     at com.bea.ld.Server_ydm4ie_EOImpl.executeFunction(Server_ydm4ie_EOImpl.java:208)
     at com.bea.ld.Server_ydm4ie_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:491)
     at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:120)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:434)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:429)
     at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:35)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)

Hi,
I am trying to do something like this but with Oracle stored procedure which returns an associate array and a cursor and these are defined as INOUT. I am not finding a way how to do it with editable row set. Can you plese list the steps used to make things work.
Thanks.

QName error while calling a web service from Sourcing

I need to call a web service from Sourcing script. The web service team has provided us the WSDL and I have generated the required stubs using wsimport and packaged the required java classes in a custom JAR. Now while calling a web method using this jar from my script, I am getting and exception. The exception message that I printed out was this:
Caught exception e with msg Connection IO Exception. Check nested exception for details. (Connection
IO Exception. Check nested exception for details. (Connection Exception; nested exception is:
java.lang.IllegalArgumentException: cannot create QName from "null" or "" String).)
The same jar and same code works fine when called from a standalone java program.
I am not using or creating QName anywhere in my script. The only place where QName is used is in the generated java class and there it is created from the correct namespace URL
Can anyone please help me out in figuring out what is the issue?

This is the stack trace of the error:
#2.0 #2014 05 08 09:02:30:915#+00#Error#com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding#
#BC-ESI-WS-JAV-RT#webservices_lib#C000CF8242BA4B800000002100002648#2174850000000005#sap.com/E-Sourcing-Server#com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding#VAC53324#89##D811EE96D68E11E3C9E0000000212F82#3cf7fe38d68f11e3c963000000212f82#3cf7fe38d68f11e3c963000000212f82#0#Thread[RequestHandler.RqThread: fullsave,5,Dedicated_Application_Thread]#Plain##
Connection IO Exception. Check nested exception for details. (Connection IO Exception. Check nested exception for details. (Connection Exception; nested exception is:
    java.lang.IllegalArgumentException: cannot create QName from "null" or "" String).).
[EXCEPTION]
com.sap.engine.services.webservices.espbase.client.bindings.exceptions.TransportBindingException: Connection IO Exception. Check nested exception for details. (Connection IO Exception. Check nested exception for details. (Connection Exception; nested exception is:
    java.lang.IllegalArgumentException: cannot create QName from "null" or "" String).).
    at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.writeSOAPRequestMessage(SOAPTransportBinding.java:256)
    at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call_SOAP(SOAPTransportBinding.java:1318)
    at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.callWOLogging(SOAPTransportBinding.java:991)
    at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call(SOAPTransportBinding.java:945)
    at com.sap.engine.services.webservices.espbase.client.jaxws.core.WSInvocationHandler.processTransportBindingCall(WSInvocationHandler.java:168)
    at com.sap.engine.services.webservices.espbase.client.jaxws.core.WSInvocationHandler.invokeSEISyncMethod(WSInvocationHandler.java:121)
    at com.sap.engine.services.webservices.espbase.client.jaxws.core.WSInvocationHandler.invokeSEIMethod(WSInvocationHandler.java:84)
    at com.sap.engine.services.webservices.espbase.client.jaxws.core.WSInvocationHandler.invoke(WSInvocationHandler.java:65)
    at $Proxy2539.grantOrganizationRoles(Unknown Source)
I tested the same custom JAR, that is deployed in Sourcing, separately using a standalone java program and there it gave back the correct SOAP response

Error while calling utl_dbws.create_service

hi,
i get following error
"ORA-29541: class SYS.oracle/jpub/runtime/dbws/DbwsProxy could not be resolved"
while calling a webservice from utl_dbws.create_service
Can any on help me.
kiran

Done That,
Thanx a ton Dave, it worked.
So I am finally moving on :-)
Just one question Dave, I happened to work on the Beta release of this version too, the problem was not there. How come we have been able to get it in dev preview.

Internal Error occurred while calling the ProcessDPCommands API

We have installed Business Objects XI with MySQL. We are getting following error when we click on view query on the WEBI Reports
" Internal Error occurred while calling the ProcessDPCommands API Error WIS 30270".
When we change the CMS database to ORACLE everything works fine it looks like some issues when CMS database is MYSQL
Please hep to fix this problem
Installation is on Solaris 10
Edited by: AshishDatar on Nov 6, 2009 3:00 PM
Installation is on Solaris 10

did you check whether universe connection is pointing to the correct db?The following url might be helpful:
[http://www.forumtopics.com/busobj/viewtopic.php?t=52355&view=previous]

Getting Error:Failed to open the connection while calling crystal report

I am getting the below error while calling the crystal report from dot net app. I am using OLEDB to connect to database. It is working perfectly in our DEV environment but as soon as I move it to production information after changing the logon information in the report it start giving the below error.
Failed to open the connection.C:\WINDOWS\TEMP{C2FD97D9-2ADE-41BB-88FF-23A4DF20BC6F}.rpt
Details: [Database Vendor Code: 17 ]

Are you able to connect to the database from the production machine using a UDL file?
If you haven't tried this, here's how to do it. Take these steps on the machine that is hosting the application. Create a new text file on the desktop. Change the file extension to ".udl" (without the quotes). Double-click on this to bring up the OLEDB connection test: start on the Provider tab and select the appropriate provider. Click "Next" and on the following tab enter your connection information. Click the "Test Connection" button to test the connection. Does it connect to the database successfully?
If you click on "OK" to close the dialog and then open the UDL file with Notepad, you should see an OLEDB connection string. In this string should be the same property values for server, database, user id and password which you are providing through your application. If they are not the same, modify your application to use these values.
If testing your connection information with the UDL file works but your application is still failing when using the same credentials, try profiling or tracing the database. Do you see connection attempts from the application? Are there any errors?
If you're impersonating, have you set up windows authentication correctly for both the application and the database?

An internal error occurred while calling 'submitReport' API. (Error: ERR_WI

An internal error occurred while calling 'submitReport' API. (Error: ERR_WIS_30270)
We get above mentioned error message at any point in WebI Rich Client.
DataSource: Teradata 12.0 (Local machine)
BO XI 3.1 Client installed on local machine
Universe (Secured connection)
WebI : desiging and creating in Standlone mode
WebI client version : 12.1.0.882
Many times above written error is thrown 2-3 times even when we click on OK button and lastly followed by new error message:-
Unable to get the first page of the current report - Web Intelligence will switch to structure view (WIJ 20003).
Flow: We create report based on locally saved universe. There are couple of scenarios for which error comes
1) After successfully saving the report, reopen and refresh causes this error (1st error and 2nd)
2) Droping a properly written variable on measure column, if done Ctrl + Z, report works sometimes (both or 2nd error message)
3) Draging out the mesaure or dimension from report (only 2nd error)
Report is simple and no other stuff except the cross tab table
Even if we start with simply dropping the dimension and measures on report, 2nd error comes at any time.
What we noticed is that if we do all desiging in structure mode and then run instead of in result mode, reports works for more time.

You can have a look here:
Input Controls with Break Error on webi report
http://www.forumtopics.com/busobj/viewtopic.php?t=60789&postdays=0&postorder=asc&start=45
Re: internal error occurred while calling the 'submitReport' API.
I'm Back
HAPPY NEW YEAR

Error while calling the Mapping function module for BW Extraction

Hi
iam getting runtime error while calling the BW mapping function
The error description is as shown below.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "GP466CV1Y7W2VML1PJ3VB80KDOP" had to be terminated
 because it has
 come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "CALL_MAPPING_FUNCTION" "(FORM)", nor was it propagated by a RAISING
 clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "CMS_CB_BW_MAP", the STRUCTURE parameter "EXTRACT_DATA" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter " " has an incompatible fragment view.
I am passing the EXTRACT_DATA parameter as specification LIKE with the associated type - corresponding structure
Please let me know how can i resolve this issue
Regards
Leon

Dear benarji ,
I'm having the same problem help me to correct . I have mentioned below as what error i got.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "ZDLROUTSTANDING_COPY" had to be terminated because it
 has
 come across a statement that unfortunately cannot be executed.
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "PDF" "(FORM)", nor was it propagated by a RAISING clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "/1BCDWB/SF00000080", the STRUCTURE parameter "IT_WORKS_SF" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter "SFTWORKS" has an incompatible fragment view.
Missing RAISING Clause in Interface
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 876
 Module type (FORM)
 Module Name PDF
Trigger Location of Exception
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 894
 Module type (FORM)
 Module Name PDF
Source Code Extract
Line SourceCde
864 ** i_logo = 'ENJOYSAP_LOGO'
865 * IT_LIST_COMMENTARY = I_LIST_COMMENTS1.
866
867 ENDFORM. "alv_top_of_page1
868 *&---------------------------------------------------------------------*
869 *& Form PDF
870 *&---------------------------------------------------------------------*
871 * text
872 *----------------------------------------------------------------------*
873 * --> p1 text
874 * <-- p2 text
875 *----------------------------------------------------------------------*
876 FORM pdf .
877
878 * *** Smartforms & PDF ***
879
880 ssfctrlop-no_dialog = 'X'.
881 ssfctrlop-preview = 'X'.
882 ssfctrlop-getotf = 'X'.
883 ssfcompop-tddest = 'ERP7'.
884 DATA : mcheck LIKE sy-subrc.
885 CLEAR : fm_name.
886
887 "Get Function module name for given smartform
888 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
889 EXPORTING
890 formname = 'ZSFDLOS1'
891 IMPORTING
892 fm_name = fm_name.
893
>>>> CALL FUNCTION fm_name
895 EXPORTING
896 control_parameters = ssfctrlop
897 output_options = ssfcompop
898 mrefno = mrefno
899 * P_TITLE = MTITLE
900 IMPORTING
901 document_output_info = st_document_output_info
902 job_output_info = st_job_output_info " IT_OTF_DATA
903 job_output_options = st_job_output_options
904 TABLES
905 it_works_sf = sftworks
906 EXCEPTIONS
907 formatting_error = 1
908 internal_error = 2
909 send_error = 3
910 user_canceled = 4
911 OTHERS = 5.
912
913 IF sy-subrc NE 0.
Advance Thanks

An internal error occured while calling 'processDPCommandsEx' API. (Error: ERR_WIS_30270)

Hi ALL,
I am facing a wierd issue while opening/refreshing/broadcasting a webi report.
The error message scrnshot:
This error is not throughout the reports, but for specific reports only, when checked the Bex query definition it works fine, but gives error for Webi reports.
Recently we had upgrade of BO 4.0 SP7 patch 9.
The reports are directly built on Bex queries, Bex queries contains simple Structures and few CKF's.
Would be thankful for any help recieved in resolving the above issue.
Regards,
Jaywant Kulkarni.

Hi jaywant,
Please check the note: 1760827 it may be helpful
( An internal error occurred while calling the 'processDPCommands' API. (ERR_WIS_30270) due to some scenarios.
Scenario 1:
Error occurs when try to refresh a migrated Web Intelligence report in InfoView, after entering a date or dates for prompts.
Suggested Solution:
Modify problematic report in Webi.
Change the prompt definition to be a constant, run the report in Webi, and save it.
Change the prompt definition back to prompt with required date definition. Make sure you are using the correct date format! (The report prompt should tell you what the format is supposed to be.) Re-run the report in Webi, and save it.
Re-open the report in InfoView and refresh.
Scenario 2: Error occurs when trying to edit the properties of a Webi report containing merged dimensions.
Suggested Solution:
Remove the merged dimensions and then re-establish them.
Scenario 3: Error occurs when the InfoView report has been open and idle for a long time.
Suggested Solution:
This error can be an indication of a time-out, based on the server’s settings. Make sure you save your work often. You will need to close and re-open the report when you get this error, and you may have lost any unsaved changes.

"A technical error during invocation : Could not invoke service reference" Error message while calling a service from BPM

Hi Experts,
We are facing a issue while calling a Automated activity from BPM process, the process gets suspended and the BPM logs says "Process XYZ suspended, A technical error during invocation: Could not invoke service reference name fdhueoegghejietyhsjk6886 Component name ABC " We have already checked the mapped service reference and provider system. Gone through the below link, but no help.
http://http://wiki.scn.sap.com/wiki/display/TechTSG/Sending+a+message+from+SAP+NetWeaver+BPM+process+to+PI+fails+via+automated+activity?original_fqdn=wiki.sdn.sap.com
Any pointers or suggestions to fix up this issue will be highly appreciated. Thanks in advance.
Regards,
Mohit Jaju

The details/ID in NWDS Service Reference must exactly match the SOA configuration. Sometimes it's possible you have changed the reference or the group itself and something changed to become mismatched.
It's possible they don't match - but the SG itself will show green in NWA since the service exists and responds on the target system. Does the ID listed in the error match what is shown in the NWDS project?
regards, Nick

Error while calling "BAPI_CUSTOMER_FIND" in BPM

Hi everyone,
we have a problem while calling a BAPI "BAPI_CUSTOMER_FIND" on an ECC backend system from a BPM. This automatic activity works very well if we just search some customers, which really exist in the ECC system. If we search any customers, which don't exist, we get a runtime exception on the CE server. But what really wired is, we can call this BAPI in the WS Navi on the CE successfully with any input parameters. This BAPI gives back a result_tab in the response message. In the result_tab, we can find the TYPE field indicating whether any customers are found or not. Actually this BAPI will not generate any exceptions. In order to exclude mapping errors, we delete the output mapping for this step. Could anyone give us some help? Thanks a lot in advance.
The error trace is following:
An error occurred while executing transition AUTOMATED_ACTIVITY_Debitor_suchen
com.sap.glx.adapter.BPMNAdapter:Token_0_ShowCase_Handwerkerparkausweis_0f40fca3e9c74b4385726b3cd6a3245d token,
com.sap.glx.adapter.BPMNAdapter:Instance_0_ShowCase_Handwerkerparkausweis_0f40fca3e9c74b4385726b3cd6a3245d parent,
com.sap.glx.adapter.internal.ContainerAdapter:Context_2_Antrag_Kontext_0f40fca3e9c74b4385726b3cd6a3245d context_3){
exit=new com.sap.glx.adapter.BPMNAdapter:Exit();
Caused by: com.sap.glx.adapter.api.AdapterException: RuntimeException occured with not AbapException
at com.sap.glx.adapter.app.ucon.SCADASWrapperImpl.invoke(SCADASWrapperImpl.java:162)
at com.sap.glx.adapter.app.ucon.UnifiedWebServiceCallObject.invokeWebServiceOperation(UnifiedWebServiceCallObject.java:100)
at com.sap.glx.adapter.app.ucon.UnifiedWebServiceCallClass.invoke(UnifiedWebServiceCallClass.java:174)
at com.sap.glx.core.dock.impl.DockObjectImpl.invokeMethod(DockObjectImpl.java:530)
... 14 more
Caused by: java.lang.RuntimeException: Es sind Warnungen aufgetreten
at com.sap.sdo.das.jco.JCoInvoker.checkReturnStructure(JCoInvoker.java:350)
at com.sap.sdo.das.jco.JCoInvoker.accept(JCoInvoker.java:257)
at com.sap.engine.services.sca.plugins.jco.JCoImplementationInstance.accept(JCoImplementationInstance.java:56)
at com.sap.engine.services.sca.das.SCADASImpl.invokeReference(SCADASImpl.java:335)
at com.sap.glx.adapter.app.ucon.SCADASWrapperImpl.invoke(SCADASWrapperImpl.java:116)
regards
Xiang
Edited by: Xiang Zhang on Jun 14, 2010 2:48 PM
Edited by: Xiang Zhang on Jun 14, 2010 2:57 PM

Hi Xiang,
You may need to check if the JCo settings are fine and connectivity is proper.
Regards,
Arafat

Speaker crackles while calling firmware 2.2

Similar Messages

Maybe you are looking for