Speaker drop down menu in itunes is not there.

I have airport express and set up airtunes, but itunes does not have a drop down menu to pick which speakers to play through. There seems to be no support docs on this. The airtunes setup page makes it sound like, hey, no problem, just choose the speakers from the drop down menu in the bottom right of itunes. But it just ain't there, and there is no advice on how to make it work. The airtunes instructions are very lame. It works great for the Internet, and all the software is up to date. I've rebooted, restarted itunes, and airport express. No go. They made it sound so great when I bought airport express.

Ok, got link by pasting
To stream music from your computer to an AirPort Express, or to stream videos and music from your computer to Apple TV, click the icon in the bottom right corner of the iTunes application (verify that you have iTunes 10.2 or later)."
But , my iTunes, 10.5, has no such icon.

Similar Messages

  • Removing genres from drop down menu in iTunes.

    How can I remove deleted genres from the drop down menu in iTunes? This is not a question on how to remove genres from iTunes interface but from the drop down menu once a genre has been removed.

    Ok, got link by pasting
    To stream music from your computer to an AirPort Express, or to stream videos and music from your computer to Apple TV, click the icon in the bottom right corner of the iTunes application (verify that you have iTunes 10.2 or later)."
    But , my iTunes, 10.5, has no such icon.

  • Adobe Form... Is there a way to use a drop down menu to highlight or note other fields...

    I am working on a simple Adobe form.  I am currently trying to figure out if there is a way to use the answers of a drop down menu to either mark, note or highlight 14 other fields.  There are 9 possibilities in the drop down menu, include a blank and NONE.
    For example if the drop down menu is set to 1, then field 9, 10 and 14 are marked, noted or highlighted. 
    Is this possible with a script?
    Thank you in advance for any help! 

    Have you looked at the properties that are available to form fields. I would look at setting the fill color or border color for a form field. Either of these can be done with Acrobat JavaScript.

  • I want to delete history; the drop down box shown in your instructions is NOT the drop down I get when I right click; the drop down menue I get DOES NOT offer a delete option....I'm stuck, What do I do?

    I am following the directions give in 'Help'. However, I cannot follow them because the Assumed drop down menu is not the one I get, so I am stuck.
    I want to delete my History...
    ...how is this done?

    See:
    * [[Clearing Location bar history]]
    * [[Cannot clear Location bar history]]
    * [[Smart Location Bar]]
    * http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox

  • How do you get drop down menu in Yosemite to not drop down?

    When I try to enter a URL or address into the window at the top of the Safari screen in Yosemite, a drop down menu appears with a bunch of icons on it which blocks the screen. I need to see the screen when I'm entering a URL line. How do I get the drop-down with the icons on it to go away?

  • Joining tracks not in my drop down menu for itunes 11

    I can't access the "joining tracks" option in the new itunes 11. I can see and use "get info" and Submit info" but can't join tracks of audiobooks when attempting to download them from cd format. Help!!

    Did my response to your other post help?

  • When I look for a website to go to the addresses I put in are shown in a drop down menu but they are not in alphabetic order, how do I sort it permanantly?

    I have set Googleas my homepage when I look for a webaddress the drop menu displays the sites however they never stay in alphabetic order, how can I set it so that this happens?

    See this link - http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox

  • Get / Put commands in site drop down menu greyed out and not working

    Re: Dreamweaver CS4
    About a year ago my get and put commands greyed out and stopped working.  I called my webhost and they were no help, they did say that they moved my site to a new (linux) server about the same time.  I have applied all the correct settings on my configure server window and when I hit test it connects successfully.
    I have been posting over the last year using Firefox FTP but am making quite a few changes and it's making me crazy going back and forth.  Anyone have any ideas?

    Closing this question out, the MacBook reverted to normal behavior sometime since I posted the problem and this post. No clue why.

  • On iMac Lion where are the fractions in Pages and Mail?  They used to be under "characters" in the "Edit" drop down menu, but they aren't there anymore.

    Since downloading Lion, I am unable to find fractions in the edit>special characters submenu anymore (for Pages and Mail).  Anybody know where they went to?

    You could use the Auto Correction in the Pages preferences. There are several pre defined fractions. You have just to check them so you can use them in Pages. I can't help you with Lion as I don't have it.

  • Why does my drop down menu not have setup sync?

    MY drop down menu in Firefox does not include setup sync. Do I have the latest version of firefox? I amd trying to sync info with my new laptop.

    Firefox > Tools > SYNC NOW
    Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    <b> To Enable SafeMode </b>
    *You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    *''Once you get the pop-up, just select "'Start in Safe Mode"''
    If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
    Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
    * https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • HT2242 this doesnt work! Here is a screen print. English is NOT in the drop down menu to choose!

    English is not in my drop down menu! This is not helping!

    Languages are determined by the serial number and region-specific installers. If a language is not listed, it's notr supported by the installer or your serial doesn't allow it. If you feel that is not what you want, get in touch with support to obtain an English version.
    Mylenium

  • Updating drop down menu depending on another drop down menu

    Hi!
    I'm making this questionnaire, and it has 10 questions (q01 to q10).
    Each question has 4 sub-questions with an associated drop-down menu (q01L1 to q01L4, q02L1 to q02L4, etc.).
    The values available to select from the drop-down menu are: 1, 2, 3, and 4.
    For each sub-question, the user has to select a value (1, 2, 3, or 4), and that value can only be selected once for each question as a whole.
    I suppose that JavaScript will be able to remove, update, or rebuild the other drop-down menus according to the answer given to each sub-question. How can it be achieved? I have no idea how to make that happen. Could you help?
    Thanks.
    For example :
    This is what the user actually see BEFORE filling the question :
    Question 1 : When disagreeing on points of view, I get influenced by
    [Drop-down menu 1] : The tone/volume of voice of the person with whom I speak.
    [Drop-down menu 2] : My capability or incapability to understand the point of view of the person with whom I speak.
    [Drop-down menu 3] : The logic and the rationale on which the person with whom I speak bases his/her opinion.
    [Drop-down menu 4] : Whether or not the person with whom I speak is sensible to what I may feel.
    The following is for you to visualise the way I named the fields in the PDF questionnaire :
    q01 : When disagreeing on points of view, I get influenced by
    q01L1 {1,2,3,4} : The tone/volume of voice of the person with whom I speak.
    q01L2 {1,2,3,4} : My capability or incapability to understand the point of view of the person with whom I speak.
    q01L3 {1,2,3,4} : The logic and the rationale on which the person with whom I speak bases his/her opinion.
    q01L3 {1,2,3,4} : Whether or not the person with whom I speak is sensible to what I may feel.
    q01 = the name I gave to the question 1
    L1 = the name I gave to the sub-question 1
    q01L1 = the name I gave to the drop-drop menu of the sub-question 1 of the question 1
    {1,2,3,4} = the answers the user can select from the menu.
    The user can answer :
    4 : The tone/volume of voice of the person with whom I speak.
    2 : My capability or incapability to understand the point of view of the person with whom I speak.
    1 : The logic and the rationale on which the person with whom I speak bases his/her opinion.
    3 : Whether or not the person with whom I speak is sensible to what I may feel
    But cannot answer :
    4 : The tone/volume of voice of the person with whom I speak.
    2 : My capability or incapability to understand the point of view of the person with whom I speak.
    1 : The logic and the rationale on which the person with whom I speak bases his/her opinion.
    4 : Whether or not the person with whom I speak is sensible to what I may feel
    This is where the JavaScript comes into play. What can be done to remove, update, or rebuild the other drop-down menus according to the answer given to each sub-question?
    If the user answers 4 to q01L1, the 3 other drop-down menus should look like this
    4 : The tone/volume of voice of the person with whom I speak.
    q01L2 {1,2,3} : My capability or incapability to understand the point of view of the person with whom I speak.
    q01L3 {1,2,3} : The logic and the rationale on which the person with whom I speak bases his/her opinion.
    q01L3 {1,2,3} : Whether or not the person with whom I speak is sensible to what I may feel.
    And then, if the user answers 2 to q01L2, the 2 last drop-down menus should look like this
    4 : The tone/volume of voice of the person with whom I speak.
    2 : My capability or incapability to understand the point of view of the person with whom I speak.
    q01L3 {1,3} : The logic and the rationale on which the person with whom I speak bases his/her opinion.
    q01L3 {1,3} : Whether or not the person with whom I speak is sensible to what I may feel.
    And so on.
    Message was edited by: einsteinbqat

    I'm sure that question is an FAQ in whatever language you're asking about. But you should really find the forum for that language. This is the forum for Java programming and that ain't Java.

  • 3 drop down menu issues

    I have two issues here. www.newstribune.com. I know some of
    this may be css issues, but I am aweful with css and could use a
    cheat sheet for the css that dreamweaver makes for these drop down
    menus, so I know what controls what...
    ok..
    IE 6.0 will scroll out the drop down menu options but will
    not allow the click... any ideas?
    IE 7.0 renders the drop down menu's properly, but my front
    page (and front page only) in firefox, the drop downs are off set.
    I have no idea why...
    Please not that the drop downs were made into an include and
    are rendered on all the pages. (It is a process so, you may find
    some pages that don't have the new drop downs if you poke around a
    lot.)
    lastly, if anyone knows what code I should strip out of the
    drop down menu include in order to not cause the errors but still
    allow it to be opened in Dreamweaver, can you please let me know?
    If that is not possible, what should I remove? The entire code is
    below.
    _________

    hello, thanks for reporting. hopefully it will help other affected users finding a solution too...

  • Increasing an array and making a drop-down menu

    Hi everyone,
    I would like to do two things:
    1.  After scaning tag IDs from an RFID reader from a serial port and individually entering them into an array (using auto-indexing), I get a n x 1 array (where n is the number of iterations, or rows).  Everytime I scan an entry in, I would like to add two things:  the temperature it was scanned at, and the time it was scanned at.  I am getting the temperature from the serial port, and am getting the time stamp using LabVIEW.  This would then make the array a n x 3 array. 
    2.  The second thing I would like to do may sound simple.  I would like to make the n x 3 array I scanned in a drop-down menu.  It need not have the temperature and time appended to it, but it needs to have the tag IDs.  I am only doing this to convserve space on the PDA screen. 
    I am attaching a sample file of what I am currently working on.  The "Read String" field represents the tag ID's i'll be reading.  It'll be in ASCII.
    I'll appreciate any help
    Thank you!
    Amal Patel
    Attachments:
    string stuff.vi ‏13 KB

    1. Simply make a 1D array of your 3 elements first (using "built array" with three inputs) inside the loop, then make it into a 2D array (e.g. at the loop boundary using autoindexing. You can also built it after the loop as in the image below.
    2. Actually, you're not getting a "n x 1" 2D array, but a simple 1D aray of size N. You could for example feed it to a "strings[]" property of a ring control.
    Message Edited by altenbach on 10-29-2006 08:35 AM
    LabVIEW Champion . Do more with less code and in less time .
    Attachments:
    StringArray.png ‏4 KB

  • How do I export as XD Cam? I don't see it on the drop down menu.

    I have the latest update of Premiere Pro CC and read that it has native support of XD Cam but I can't seem to find it in the export drop down menu.  Is it not included in the initial download?  Do do I need to install separately?  If so, how ? Thanks.

    Are you in the PrPro export box, or did you cue over to Adobe Media Encoder (AME) which is really the complete export program. If not, select the "Queue" option at the bottom of PrPro's dialog box, and then AME pops up.
    As shown below, type in "xd" in the search box, then appears ...
    Neil

Maybe you are looking for