SPEAKER "HUMMING/STATIC" SOUND...AGAIN! Please help!!!
I sent in my MBP on the 27th of August, got it back yesterday. i have been using it all day today, and the speaker hum/screech from the right speaker is back again!!!!
I have a 15" 2.16 C2D, 1gb ram and all that stuff.
Here are the stuff they "fixed"
630-7709 PCBA, LIO/AUDIO (M59) MBPRO 15"
632-0430 FLEX ASSY, LIO/AUDIO,(M59) MBPRO 15"
Now when i use the computer, the hum is very noticable especially when the room is quiet. I need this laptop for school, and I've been without it for 2 weeks. What's going on? Also, my laptop is running at 128F* is that normal?
Does this sound problem occur all the time - even on battery power miles away from the house?
Similar Messages
-
I currently have no sound on my HP Spectre XT Ultrabook PC!!! Upon buying the laptop it had Beats audio on the laptop. That stopped working recently, but I still had the normal reduced audio, until that stopped completely soon after. I have tried multiple things to fix this problem, all without success; I tried troubleshooting the problem, I tried updating the audio driver (it said I already had the most current version), I tried uninstalling and reinstalling the driver, I tried updating the BIOS on my computer and NONE of these have worked; I still have no sound! Please help to fix this problem!
The product number is B6V42PA#ABG and it currently has Windows 7 Home Premium installed on it!Hi
Please try doing a system restore to the date where unit was working fine. In case this does not work last option is to run a recovery please back up your data. This does not work please call HP technical support & get the Speaker replaced.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
I intended to install windows on my macbook, but I removed Mac os X wrongly! Now I don't know how to install Mac again please help me.
I still don't know which version of OSX you have but assuming it's 10.7 or 10.8 .....
You need to press command-R (at the sound of the chime) to get into recovery, try that, if it does not work try command-option-R for Internet Recovery. -
The nice man Joseph Shen helped me with my google problem on my iPhone and worked for 2 days and now not working again please help me solve this problem were I can retrieve my messages on the I phone when I am not at home on my wi Fi is the only time it works correct. Bill. [email protected] 708 752 3667
http://lifehacker.com/5852948/what-to-do-if-youve-forgotten-your-iphones-passcod e
-
i am not able to sign into i message, it keeps giving me a message "could not sign in. Please check your network connection and try again" Please help!!
FaceTime, Game Center, Messages: Troubleshooting sign in issues
-
After cleaning my mac it opens and shuts down again please help!!!
after cleaning my mac it opens and shuts down again please help!!!
I opened the cover (there where the battery is) and I cleaned the dust gently with a dry napkin ...remove the battery and placed it again ...closed the cover and when i turn on my macbook bro now it shows the Apple logo and after some seconds it just shuts down (i have OSX 10.9 Mavericks)....
I tried to boot in safe mode, also tried to repair it and even re-install Mavericks and so on, but I could not fix it. I did a hardware test and the no problems occurred. -
when i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you
hi
... i have a similar problem
but just with the sleep botton.
fist use your adapter with other iphone/itouch ... is posible itś the problem
second .. let your phone charging
...normally if we conect our phone ... after some minuts it's put on.
after 2 hours ... trate to use it ... if after it your phone continue same... could be qaa electrical/physic problem
please if you have a guaranty use it.
im sorry but my english is terrible. -
I am using iPhone 4 (MC603B, version 4.3(8F190) and never updated it. as i have formatted my laptop; i have to download iTunes again. please help me to download iTunes which suits this version. where can i get the link. thank you.
Older iTunes versions can be downloaded here: Apple - Support - Downloads
Follow these steps to get your data to your new computer:
Syncing to a "New" Computer or replacin… -
my ipod keeps asking me to restore and when i do restore it just restarts and asks me to connect to itunes and starts again.please help its my sons bday and this is his present
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My iPhone 6 ear speaker is not working properly I couldn't able to hear any thing from ear speaker to listen I had to put on loud speaker or to use hands free please help me out with this problem if some body have answer?
Hi Venkata from NZ,
If you are having an issue with the speaker on your iPhone, I would suggest that you troubleshoot using the steps in this article -
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
Side, back and middle speaker on t7700 not working, please help
I have had this speaker system for a little while, and it has worked great. Recently the side speakers stopped working, so i unplugged everything, and messed around with some settings. When i plugged it back in it worked fine for about a week or two. Now none of the speakers work, except for the font right and front left. Please help. I tried going to the creative mediasource, and turning on cmss or something, and i couldn't find where to do it. i also tried accessing the eax control panel, but i can't find it under my programs. Please tell me how to make the speakers work. I have a Audigy 2 zs sound card.
I suspect it's due to the CMSS and not the speaker. The EAX console are located in Start -> Program -> Creative -> Sound Blaster Audigy 2 ZS -> Creative EAX Console.
If you still can't find it, I would suggest reinstalling from the CD.
Jason -
Front panel sound.. please help
hi,
My motherboard is MSI 915G Combo. It has CMEDIA AZALIA sound chip which supports multistreaming functionality. The sound output can be taken from frontpanel as well as backpanel audio connectors. But the frontpanel connectors are provided as pins in this motherboard. I got a Mercury KM08 ATX cabinet which has frontpanel ports. But how can I connect the pins?? The cabinet have wires to connect the pins to frontpanel.
There are 7 wires for front panel connectors in cabinet which are
1) Line out FR
2) Line out RR
3) Line out FL
4) Line out RL
5) MIC IN(R)
6) GND
7) MIC Power (L)
In my mobos manual the front pannel connection design is given as,
Pin1 - PORT 1L - Analog port 1-left channel
Pin2 - GND - Ground
Pin3 - PORT 1R - Analog port 1- Right channel
Pin4 - PRESENCE# - Active low signal
Pin5 - PORT 2R - Analog Port 2-Right Channel
Pin6 - SENSE1_RETIRN - jack detection return from front pannel jack1
Pin7 - SENSE_SEND - jack detection sense line
Pin8 - KEY - connector key
Pin9 - PORT 2L - Analog Port2-left channel
Pin10 - SENSE2_RETIRN - jack detection return from front pannel jack2
Please help me to connect the pins to the frontpanel connectors of the cabinet!!!!
also whats are jack sensing pins?? what are they used for??Jack Sensing is a feature that allows the codec to choose what kind of device (mic, speaker or line-in) you're plugging into the jack by sensing its impedance. It's of no use here for your front panel chassis.
What I would try is to match the PORT 1L/1R with your Line Out FL/FR, and PORT 2L/2R with LineOut RL/RR. There is no MIC connection I guess from the pin names. -
when activating facetime, it says...could not sign in. please check your network connection and try again. never tried facetime with my account. i tried to register with other apple ID but it does not help. please help.
a lot of us are in the same boat - no help from anyone as of yet
-
I'm having trouble with the raise to speak feature for siri. Please help
So I just got the Iphone 4s the other day and looked at a bunch of forums on how to use the raise to speak option but none of them have worked for me. I tried slowly raising it to my ear from a viewing position on the lock screen but it doesn't work. I tried the same thing from the home screen but it still doesn't work. Please help me. I would really like to learn how to use this feature.
KellieActivating Siri this way is tricky, and not at all intuitive.
You have to start with the phone in front of you, held parallel to the floor (ie. held flat horizontally), then bring it up to your ear so it's vertical with a normal, smooth motion. Your hand must rotate from the horizontal to vertical position of the phone.
If you start with the phone vertically in front of your face, then move it over to your ear Siri will NOT activate.
They key is starting with the phone held horizontally. The motion from horizontal to vertical is necessary. It uses the motion sensor as well as the proximity sensor.
This is illustrated on page 39 of the iPhone User Manual. I recommend you download the manual and look at the illustration and it will be crystal clear:
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
Jspf is getting only statically included! please help!
Hello,
I am using glassfishv2ur2; I have a jsp page, that uses ...
<jsp:include flush="true" page="WEB-INF/jspf/rightpanel.jspf"/>
to rope in a jspf (jsp segment or fragment).
I noticied via view source on my browser, the jspf is included in only statically! i.e, scripts and tags within the jspf are not getting processed, but simply being echoed back to the browser verbatim.
I have been searching the fourms and the web on this issue and some of the postings indicate that some entries are needed in the web.xml for this to work.
I don't see any servlet-mapping for the jsp tag in my web.xml and sun-web.xml - these are generated for me by netbeans. Can someone please help me ... tell me what i need to make the jspf be processed and not be statically included in glassfish?
Thanks
Edited by: ramboram on Aug 11, 2008 8:57 AMjspf files are intended to be included with the include directive - <%@ include %> not a <jsp:include>
The include directive effectively "pastes" the contents of the file into the current jsp before it is compiled.
<jsp:include> is designed to evaluate the resource at runtime. It pastes the result of running the JSP into the current response.
So you should only <jsp:include> standalone jsp pages - not fragments.
Maybe you are looking for
-
I cannot copy and paste with my clipboard in IOS 8.1. Answers?
I I am having trouble copying from any text to my clipboard and then pasting it into another document. The clipboard has a past copy of another line of text and it will not clear it and over right it.
-
Hi, I am installing the new CAP1602 AP´s aon my customers network and are seeing a strange thing. First, some basic information. Customer is using Cisco Prime Infrastruture 1.3 and I have created a few templates for provisioning. My customer has two
-
Help with reformatting a hard drive partition
A few years ago I let my friend (computer science major at the time) set up my dual boot on my Macbook Pro. He used a program called Gparted live instead of Bootcamp (claimed that "it wasn't working) set up the partition and installed Windows 7. Thin
-
I cannot synchronise IPod with contacts and calendars since I updated with iOS. 5.1.1.
Depuis que j'ai fait une mise à jour avec iOS5.1.1 je ne peux plus synchroniser mes contacts et mon calendrier avec mon ordinateur. Est-ce quelqu'un connaîtrait le moyen de régler ce problème?
-
I recorded a four person interview using four wireless lavs and two cameras. The sound of the two main speakers is somewhat 'crunchy' and there is some reverberation in the audio tracks, the sound from the lesser important two people is great, no rev