Speaker issue and Vibrating problems

Hi, hopefully someone can help me... I have had my share of iPhones, always something wrong and the funny thing... I HAVE NEVER DROPPED ANY OF THEM. well anyways... does anyone's phone when you put it on vibrate sound like there's something else vibrating in it.. not just the motor but something else???? also is it just me or just one speaker on the bottom works??
Please let me know
Thank You

I'm not sure about the vibration issue, however, there is actually only one speaker at the bottom, the other is the microphone. You should only hear sound from the one speaker that is there.

Similar Messages

BOSD, Battery issues and Heating problem after iOS 8 upgrade

i have upgraded my iPad mini to iOS 8. Ever since I upgraded to iOS 8 am facing blue screen issues and heating problem as well. This is really frustrating even the patch iOS 8.0.2 dint solve the problem. Are you guys listening our complaints. When will you fixing it.

The same thing happened to me on my 2012 Subaru Outback. I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
I paired the audio on my car with my iPhone 6. However, when I turned the car off and back on again, the iPhone would not pair automatically. I had to manually connect the iPhone with the car. Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device. So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it. YMMV

40RV525U HDMI issues, and other problems

I'm using the 40RV525U model, and none of the HDMI ports work consistently, if at all. It's been like this since I bought the TV, but I (unfortunately) didn't take it back because I could use component cables with the PS3...it's primary purpose. I recently bought a PS4, and there are no component cables available, and converters don't work. Surpringly, I was able to get the HDMI 1 port to work after changing the PS4's output to 720p, but it wasn't consistent. It worked great for about 3 days, no problems at all. And then last night, it started losing the handshake every 30 seconds or so. I would get the dreaded snow screen (snow looks great in HD, btw) and black screen, and then it would re-connect and I'd have picture for a minute.
The fact that I was able to get it to work for 3 days without the slightest problem leads me to believe that it's a firmware issue. I'm on 1.05, the latest firmware version that I can find. Are there any further updates? The problems with this TV are numerous, but I like the picture, and I can't really afford to buy a new TV.
Thanks

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 631-3811.
- Peter

Latency setting issues, and other problems.

Hello, this is my first time posting on a forum, and I wouldn't be here if I didn't think this was an interesting problem.
My computer (Hardware listings below) has a microphone lag issue. I tested it by plugging in my microphone and recording the recording through speakers, and it is very clearly lag. I am in need of a solution to that, but that is just where my problem starts. Whenever I try and load in an MPEG4 audio file, it seems to play and then all of my sound goes out on my system. Sometimes the sound goes out immediately after opening the program. The way I treat it is by putting my computer to sleep and waking it up, and the sound then returns until the program decides to randomly shut it down again. The mixing tables are reacting on screen, but there are no system sounds coming out at all. On top of that, when trying to fix my latency issues, it didn't help enough moving it down to 30 on the hardware options for the MME settings. It could be my computer is too slow or something, but I also tried switching it to asio. I have ASIO4all and I don't know if I should be running it, as I don't know too much about how my system would interact with all of these programs. I run Audition 5.5 fully legally, and I can update with whatever. I just want to be able to overdub without any lag, and everything I do to try and fix it makes a new problem happen. I am using a microphone plugged into the 3.5mm microphone slot on the motherboard. It's a Sure mic plugged in through an SLR to Quarter Inch male cable
SYSTEM:
Built
OS: Windows 7
Motherboard: EVGA P55 FTW 200 SLI
Processor: Intel I-5 760 quad core
RAM: 16 gigs Corsair XMS3
Video card: EVGA GTX 460 SE
Hard drive: W.D. Caviar Black 7200 RPM 1TB
Coolermaster storm scout case
Disc drive and Corsair power supply
If anybody knows any part in fixing or at least telling me why I have issues with all of the information I provided, I would love to hear it. I just want to record so badly after spending all of this money on the software and hardware and cables and etc...
Thank You

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 631-3811.
- Peter

C5 messaging and vibrate problem

Hello,
I've been having my C5 for about 2 months now and I am having this issue:
In the beginning (started this month) the phone dind't always vibrate when I had a message (my profile is always silent) but this week it stopped vibrating. And now today when I am getting messages the phone doesn't do anything, it doens't even show that I have a text, nor does it show a little envelope in the top right corner of my screen. I can only find out that I have a text message by going to my inbox where I then see the unread messages... I have the same issue when I change my profile.
I would find it rather weird if it was a technical problem because like I said I've only been having the phone for 2 months.
Can someone help me?
EDIT: btw, after the software update the phone uses these graphical smileys instead of the normal symbols, is it possible to turn these off?

DO you have many messages in your phone?
if so empty your inbox and sent folders.
you cant turn off the smilies....
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

WDK 8.1 update download issue and integration problem with VS Express 2013

I have VS Express 2013 in my machine and want to download the WDK 8.1 Update. However, I am facing two issues:
1. The download site says : "You have to register for downloading. Click on continue to register and download". On doing so it asks for what I want to download. Then it redirects to the page saying "Thank You for downloading". However,
it has been more than 10 times since yesterday and yet no file has popped up for download. It is the same problem with other machines.
2. On installing WDK 8.1 from softonic, it has created a separate folder and shows no way for its integration with VS express 2013. I do not get any "Windows driver functionalities" in VS Express 2013.
Could somebody point me where I am wrong.
Thank You in advance

Hi codeahead,
About this (1) issue, could you please tell me where you download the WDK 8.1 Update?
Generally, I know that we can download the WDK 8.1 Update from the following Microsoft Official site.
http://www.microsoft.com/en-us/download/details.aspx?id=42273
So please you check if you download the WDK 8.1 Update from the above link.
(1) If no, please try to download this WDK 8.1 Update from the above link check this issue.
(2) If yes, could you please tell me if you register a life user account from this Microsoft?
Generally, I know that when we download some software from this Microsoft site, we will need to register a life user account.
So please check if you have a life user account from this Microsoft site.
However, as you said about the (2) issue. Since it is related to install the WDK 8.1 with VS2013 Express. Since I am not the VS Install experts, so I suggest you can post this issue directly to this VS Install forum:https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup
, you will get better support.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Frame rate issue and interlacing problems

i am going to close a project created from others and when exported the final at source setting, 422 pro I ve got I guess some interlacing problem, horizontal lines.the project had this problems, clips at 29,97 but project is at 25 i
now considering that final target is a standard DVD and project is in 1080, what is the best way to export and to solve this issue? sending project to Compressor and there using the slowest and the best setting for dvd's?

There may not be a problem with your project if delivery is DVD. Computers do not display interlaced at all well. Output to DVD and test with a DVD player>TV. It should be fine.
Russ

DVD drive issues and other problems

Nothing but problems with my mac since day one. This is the reason why I went from PC to Mac to avoid all these problems.
Started with DVD drive problems. Took my computer in as they said wound need to replace the drive -and it would take a week.... sorry I can't be down for a week. Many of my businesses rely heavily on me have access to my computer.
There have been many small glitches since then also. Some times the display wont come back on after I have closed the lid and re-opened. Only way to get it working again is to do a manual restart.... and sometimes that doesn't even work.
<Title Edited by Host>

I forgot to mention that I have also cleared my PRAM (a few times) -- so that's probably not the culprit.

ArchCK: gensplash issues and logout problems

Hi,
i can't boot using gensplash anymore,my system is looking for a 640x480.cfg darch theme but it can't find it cause it doesn't exit.How can i tell my system to use the 1280x1024 one as it was used to when it was working?it seems that whatever i change it is not understood.
Second problem and possibly related is that when i logout from gnome X crash and everything stucks on my screen stupid graphical stuff comes out and have to hard reboot everytime,even without gdm running.
title Arch-CK
root (hd0,1)
kernel /boot/vmlinuz26archck root=/dev/sda2 video=vesafb:ywrap,mtrr,1280x1024-32@60 splash=silent,theme:darch quiet console=tty1 ro
initrd /boot/initramfs-2.6.15-archck.img
mkinitramfs snippet:
# To use fbsplash/gensplash, you need to install gensplashutils and initscripts$
# Add a theme to enable fbsplash, Try 'darch', it's included in the gensplashut$
FBSPLASH_THEME=darch
# Resolution to use, 1024x768 will be used if left blank. Format is '1024x768'
FBSPLASH_RES=1280x1024
i also reinstalled kernel26archckand all the gensplashutils ,initramfs stuff.

I solved the gensplash prblem with radeonfb here:http://bbs.archlinux.org/viewtopic.php? … c&start=30
LogOut still doesn't work,i found my self with blanck screen this time.

Unable to use recently downloaded fonts, CC sync issue and connection problems.

Today was especially interesting.
CC would say it could not connect and to retry connection, when I clicked retry connection is would fail, over, and over - I waited 15+ minutes for it to finally connect only to tell me "Coming Soon: CC will deliver fonts from Typekit to your desktop"? https://www.dropbox.com/s/5yci79zv3opmx12/CCForgotFonts.jpg < WHAT!? So now I had to search the Adobe forum to figure out why... More wasted time.
Solution: LOGOUT from CC pref and log back in, then click the resync button tucked down at the bottom corner... No Auto-sync? No notification that my syncing was not enabled; Really?
Shouldn't it be a little more intellegent, maybe remember that I just downloaded these fonts and to perhaps give me 30 days before asking me to login to verify If I still had an active CC account in order to use the fonts? This is starting to wear thin.
Everyday I have to make sure I login to CC because if I don't I may not have a function or font. Then there is the licensing I have to accept each time because I logged out; each time!
(I have deleted folders and reinstalled CC to 'fix' this, only to have it stop working after a day or two, even on a local administrator account and domain admin account)
I'm just thankful I do not travel anymore because I couldn't with CC. I would have to install CS6 in order not to worry, that should say something about this new Adobe model.

Autodiscover does resolve the details correctly but I do have two warnings saying that "The name on the security certificate is invalid or does not match the name on the site". One is showing for exchange1.mycompany.local and the other one is showing
for mail.mycompany.com
A few things:
Pls verify that you have changed all InternalURLs to + AutoDiscoverServiceInternalUri in ClientAccessServer. This is needed since you don't have the servers FQDN in your certificate. See
KB940726
Your URL for ActiveSync is wrong. It should be
https://mail.mycompany.ca/Microsoft-Server-ActiveSync
Not related to your problems, but we can see that you running Exchange 2013
RTM
--> AdminDisplayVersion: Version 15.0 (Build 516.32)
You really should be on
CU2 or
CU3
Martina Miskovic

WLC and windows radius issue and another problem

Hi everyone.
We have a problem with a costumer wireless infraestructure which has a WLC using a Windows 2003 radius server. for authentication.
The users can't connet to the SSID from monday. Anything haven't been changed and the configuration is correct.
I think its a client problem because the clients who use Linux can connect.
Any idea?
I have attached a debug dot1x events when a windows client try to connect.
We have another problem with another SSID using local wpa2/pkm/ascii authentication..
This SSID is used for smartphones. The clientes who use Android can connet, the clients who use IPhone can't.
Is this a cospiracy? xD
Thank you for avance.
Best regards

for the debug you attached, I see the client send an EAPOL start message, after it gets the Identity request. It seems to move beyond that, and then
Jul 30 15:36:47.396: 18:3d:a2:65:bd:54 Processing Access-Reject for mobile 18:3d:a2:65:bd:54
I'd take a look at the IAS logs to see why this particular client was rejected.
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Still getting certificate issues and chat problems (again)

i am getting untrusted certificate messages again when in thunderbird. I cannot access the add ons, and the message appears whenever I open thunderbird, even though it appears messages are downloading. still cannot access chat on thunderbird either. I cant wait much longer.. if this keeps on going, i am going to have to dump all the mozilla stuff and go back to what i was using previously, which is a shame, because i much prefer firefox and thunderbird.

lets try that again. Mozilla operates dozens of web sites and server locations. So read the message and identify the exact server and what the error is.
Is it an expired certificate, issues with trust chains or what?
So far I have the equivalent of "my car does not start!, it is a Ford"

Macbook Pro 10.6.8 -Minor start up issues and graphical problems.

Hey guys, I have a Macbook Pro 10.6.8. I have had this computer since Christmas 2010 and I am pretty sure it was made in mid 2010. In the time I have been using it, it has run smoothely and worked very well overall. However, in the past few months I have noticed a few odd things when starting up the computer.
These things include:
- My current desktop image is sometimes replaced with the one I had before.
- Sometimes the white loading screen with the apple logo will show for around 5-10 minutes before the computer fully starts up
And within the past week, I have seen a few other odd occurances:
- The graphics seem to lag at times, like when I'm typing, after I hit the keys it takes a bit more than an instant (like normally) for the letters to appear.
- A few days ago, in Safari, I got a colored pinwheel that just wouldn't go away. It also seemed like it was affecting the whole system, because when I tried to force quit, it took about 2 or 3 minutes for the menu to come up after I right clicked the Safari icon.
- Some programs taking a few seconds longer than normal to start and respond.
And just last night, this happened:
- I shut the computer and tried getting back on an hour later. When I opened it back up, there was an unresponsive black screen and the sleep light stayed lit instead of blinking.
I am becoming increasingly worried something is seriously wrong with my machine and I appreciate any help you can provide.

Hi,
Do you have all the updates installed? If so, I think you may need to do some maintenance on your Mac. Some caches to clean, some permissions to repair, etc... You can either use Onyx (here, just make sure to download the right version, not the Lion one: http://www.macupdate.com/app/mac/11582/onyx) when your session is running, but it takes some getting used to.
Alternately, you can install a small utility called AppleJack (here: http://www.macupdate.com/app/mac/15667/applejack), but it has to be run in Single User mode, by holding the Command and S keys down on startup. After that, you just type "applejack AUTO restart" (without the quotes, and that's a caps-on AUTO), then hit Enter, and let AppleJack do its job. Will take some time for your Mac to boot after that, but you should find a more usable machine in the end.

HT4528 On my iPhone4s, the earpiece speaker is muffled and practically useless. I have had said speaker replaced and the problem was not solved. The technician said that it may be due to something wrong with the software. Help?

If there is no solution, there is money back.

Who replaced your speaker? If you have had the device worked on by a 3rd party repair shop, then you will need to go back there to see about help. If you are willing, you can try this http://support.apple.com/kb/TS1631, but as far as out of warranty work, since the phone has been opened, Apple won't touch it.

K9A2 CF cold boot and RAID problem

Hi,
I am struggling with my mobo regarding recent cold boot issues and the problem to set up RAID on the SB600 chipset.
Here's my rig's description:
MSI K9A2 CF rev 2 (I believe because of the red heatsink) with the latest available bios flashed using the forum's tool.
Phenom 9850 BE (stock, never OCed) cooled down with Asetek closed-circuit watercooling.
2x Radeon 4850 1 Gb crossfire
4 Gigs of RAM (Nandya Technology)
HDD WD velociraptor 150 go, WD black caviar 640 go, 2x WD 1 To green caviar all drives are SATA-2
1 PCI SiI 3512 sata controller for the sata ODD drives (DVD + DVD burner)
PSU is advent 750 W
OS: Vista 64 bits home premium working with AHCI drivers
So here is the deal: the system has been running fine for about a year.
I recently bought two 1 To HDD to set up a RAID 1 for backup purpose. The goal is to run the velociraptor as system disk (which it is currently) in raid 0+1 jobd (say standalone), the WD 640 go as data disk raid 0+1 jobd (say standalone) and the two 1To as raid one array from the SB600 onboard controller.
So I flashed the bios to make sure I would have the latest raid rom. The flash was performed with the forum's flasher without a problem, followed by a load defaults and a clear CMOS to be on the safe side.
Since then, I have random cold boot problems. I fire it up, all leds and drives are on, but no post and nothing on screen, not to mention no beeps whatsoever. I already checked the connections, mobo condensators... everything looks ok. The system was bought pre-built and was working flawlessly beforehand. I need to power it off manually and restart it once to a few times and then it post and boots to the OS without a problem.
Is there any specific option I should look for in the bios to change that? I assume I might have made a wrong configuration at some point.
Concerning the RAID problem I cannot access the SB600 onboard Fastbuild utility as long as the PCI sata controller is plugged in --> I get the "Not enough space to load PCI rom" error message. Without the PCI card I can access Fastbuild and define arrays without a glitch. But if I disconnect the card, I no longer have optical drives
Does anyone have a clue how to use the SB600 in raid mode along with a PCI sata controller?
Also, when RAID is setup, arrays defined and all HDDs recognized by the bios, is there a way to make Vista load the raid driver without reinstalling from scratch? For now I can use SATA drives in AHCI mode but get a BSOD whenever I try booting from RAID.
I know that's a lot of questions but I could really use some help. I have been roaming the web and could not find anything.
Thanks in advance for your insight.
Cheers

Quote
Concerning the RAID problem I cannot access the SB600 onboard Fastbuild utility as long as the PCI sata controller is plugged in --> I get the "Not enough space to load PCI rom" error message. Without the PCI card I can access Fastbuild and define arrays without a glitch.
This is common problem with boot-roms, the BIOS can't handle multiple of them, only 1 if you use raid.
So disable the PCI-Sata bootrom or disable the RAID.
This is a BIOS limitation, nothing you can do about it.
AHCI is a type of RAID also.
What you see is normal, the BIOS doesn't have enough hooks to put a Boot-rom in, and exspecially the RAID MUST need one to function.
Other solution is to use Windows software raid and put the RAID controller in normal-mode.
You won't notice the speed difference anyway as the onboard is a soft-raid as well, but then done in the BIOS, however in both cases it's the CPU that must handle them.

Speaker issue and Vibrating problems

Similar Messages

Maybe you are looking for