Speaker output for g5

I have a question about the iMac G5 speaker output. When I connect my Bose stereo to my Imac using an analog stereo jack, the audio quality sounds garbled and not usable. Is the Imca only good for speakers with optical jacks only?

I have Logitech® X-530 with a analog converter and the sound pretty well. If the bose that u have has 3 mini jacks output you can also use the fire wave. http://www.griffintechnology.com/products/firewave/
If u have some other speakers u can use to test the computer to make sure is not computer.

Similar Messages

  • With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

    With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

    From the fcp.co forum. See if this does anything for you.
    simon_hutchings
    OFFLINE
    Junior Boarder
    Posts: 24
    Thank you received: 5
    Karma: 1
    I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
    1. Open the application Audio Midi Setup (located in Applications : Utilities)
    2. Select the Output Tab for the current output device
    3. Select the Configure Speakers option
    4. Select the Multichannel tab
    5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked. 

  • External mic inputs and speaker outputs for CP-7937G Conf Phone

    Has any tried to connect the Polycom® SoundStation IP Multi-Interface to the Cisco Conference Station CP-7937G Phone, it appears to be the only way to get eextra mic inputs and line level outputs for enhancing conference call?  See attached Quick Start Guide.

    Here's where I am on interfacing external mikes, PCs, speakers, etc. with the Cisco 7937. It seems this I/O port is quite a mystery to both Cisco and the manufacturer (Polycom). There are virtually no technical specs for it anywhere on line. So, I bought a variety of cables and connectors and tried exploring. I could never get anything but input into the 7937 to work. I could never get any output from it despite the output symbol next to the port. Here are the input test results:
    3 pole 2.5mm to dual stereo 3.5mm breakout cable didn't work at all
    4 pole 2.5mm to stereo 3.5mm for input worked only on one pole (red connection). Half volume?
    3 pole 2.5mm to stereo 3.5mm for input works only on white connector (louder?)
    3 pole 2.5mm to mono 3.5mm for input, works (louder?)
    2 pole 2.5mm to stereo 3.5mm for input, works
    2 pole 2.5mm to mono 3.5mm for input ,works, and is simplest.
    So, if you want to feed an external audio source into the Cisco 7937, almost any type of 2.5mm male connector cable at the 7937 will work
    I could never find any mention of successful use online, and could not find an output signal myself, so I suspect the 7937 was just mislabeled.

  • I own a Zen Vison: M and am wanting a speaker system for my player

    I know there aren't any docking speaker systems for them yet, and I honestly doubt there will be any real soon.
    So what would be the best way to go?
    My X girlfriend had an I-Pod (poooo) and she had this speaker system.
    http://www.alteclansing.com/product_details.asp?pID=IM7
    Honestly that thing would be the only reason I would go gay for I-Pod.
    What would I have to do to get something close to that?
    A dock: http://us.creative.com/products/prod...7&product=4485
    Speaker System: http://us.creative.com/products/prod...7&product=4097
    Wireless remote?:http://us.creative.com/products/prod...Specifications
    The wireless remote confuses me becuase I swear the other night it said it suppotered the Vision: M and now it just says the Vision.
    I've also found this, The Player Dock http://us.creative.com/products/prod...5&nav=features
    But would it be compatible with the wireless remote?
    It's so hard being a creative customer, There aren't any worth while accessories yet.
    Anyway, if anyone could help me that would be great.

    Hi There,?I just bought my Zen Vision M yesterday and so far I'm very happy with it. I had a Toshiba Gigabeat S30 first but the battery was horrid (seems to be very close to the Zune in design and features etc)?then I swapped for an 80GB Ipod video but there is a massi've problem with the EQ settings wanting to clip passed the digital headroom (google "ipod distortion")?Got The Creative Zen Vision M and I can say the following so far:?The sound output is strong and powers my $200 Sony in ear headphones with clean power even with bass all the way up. It's got a custom 5 band graphic EQ which works well to customise the sound to how you want it (I hate the standard MP3 EQ options of most players)?The sound quality is Very Very Good. (I'm a Hi-Fi freak and a competent home recording engineer)?I can see the screen easily even on a hot bright sunny day outdoors on 50% brightness (Very useful)?I have a couple of MP3's that were converted from WMA's and on some players they dont play but the Creative plays them fine. The use interface is easy to navigate but not quite as good as the Toshiba Gigabeat but looks nicer. The FM radio is great sounding aswell which is a bonus and you can custom name the stations. You can set photos as wallpaper and it comes with 6 player skins to customise the look. Battery seems pretty good. when its not locked the screen goes dimmer instead of turning off completely but the battery still seems to last ok. (if you lock it though it will last even longer.)?I haven't found anything bad about it yet. Toshiba Gigabeat S30? 5/0Apple Ipod Video 80GB? 2/0Creative Zen Vision M?? 0/0 so far?hope this helped.

  • Connect Firewire 6-pin connector and wire to my receiver speaker outputs

    Hi
    I want to import my LP's into my iBook G4 Firewire port. I suspect there are 6 wires in the cable (I won't know unequivocally until I actually cut the cable....:-) My question is which wires to wrap together for each of the 2 speaker ports so I get a stereo input? Or is there a better way to do this?
    Thanks! John
    my email: [email protected]

    Duane- Thanks for the welcome! I'm a pretty decent carpenter but I've never done anything like this before. I had thought I could just go from the speaker output ports on amp my turntable is attached to. However, someone at work today said I will need an analog to digital converter (duh). So I will be trying to find a diagram or description of exactly how to do this and do a search on the converter box.
    Any suggestions or observations would be most helpful!
    John

  • Alternative speaker cable for G500 (5.1)

    I'm using G500 on X-fi XM
    Can anybody suggest alternative speaker cable for my G500 (from sub to sattelite) so i can have maximum sound?
    How about RCA connector and how to make them?
    Message Edited by rekayasa on 03-30-2007 04:36 AM

    Thanks for the response- your comment "checking any receiver to make sure it has a multi-in jack that has an input etc" ? Do you mean output? I'm not aware of any home theatre receiver available with inputs for each speaker.
    With the MediaCenter 2004 Edition software I do not have the option of changing settings for the sound card. I had originally planned on purchasing a receiver that passed audio through without any enhancements (AC3, Neo etc) instead relying on the card to handle conversions. With MCE it looks like I will have to use the external receiver to deal with changes. Is this going to work with the Audigy 2 ZS + MCE2004?

  • How do I get my external microphone to go through my speaker system for on-line karaoke?

    How do I get my external microphone to go through my speaker system for on-line karaoke?

    You can use a simple little App called LineIn to Pass Thru Audio from Input to Output.
    Go to > Rogue Amoeba | Freebies: Free Software for Mac OS X

  • Optical digital audio output for mac book?

    Hello, I am wondering if MacBook pro Retina version has the Optical digital audio output or thunderbolt adapter? so i can use optical cable to do output for my music.

    Hi alece,
    Just to clarify something;
    When using an optical cable there are several standards of audio that can pass through the cable:
    S/PDIF - a stereo signal - http://en.wikipedia.org/wiki/Spdif
    AC3 or Dolby Digital - up to 5.1 surround - http://en.wikipedia.org/wiki/Ac3
    Dolby Digital Plus - up to 7.1 surround - http://en.wikipedia.org/wiki/DolbyDigitalPlus
    ADAT Optical - up to 8 channels of audio - http://en.wikipedia.org/wiki/ADAT_Lightpipe
    MADI - up to 64 channels of audio - http://en.wikipedia.org/wiki/MADI
    I´m sure other people can add more to the list if they want to, my point is that these signals can pass through the exact same kind of optical cable.
    The important bit to know is what does your equipment and software support... in theory your question is quite logical, a software can play 5.1 surround to a optical output like Apple DVD Player does with the built-in sound card of a modern mac. However, Logic does not support live encoding of AC3. That is why you have to output the surround mix in Logic to a sound card with at least 6 channels (5+1 as in 5.1) connected to your speaker system. Typically this would be 5 active studio monitors plus a sub. If you were thinking to use an existing stereo I would not recommend it since most consumer speakers have no limiters to protect them from damage (but may be possible depending on your amplifiers inputs)
    I hope this answered your question
    Cheers Espen
    http://www.midiamore.com.au/

  • "internal speaker output device missing"

    The internal speaker output device missing in system preference's sound window. How do I get it to show up?

    I recently had this issue too.  It worked fine when I had my headphones plugged in, but when I unplugged them it would say "optical digital output" on the right and nothing under name in my sound preferences instead of internal speakers.
    I have a 15" macbook pro, so I plugged my headphones into the other headphone jack and unplugged them again - idk what its called or for I was just messing around - and the internal speakers showed up again and it started working.
    Maybe try that

  • 27 inch mac lost internal speaker output, 27 inch mac lost internal speaker output

    Hi There
    Has anyone had this problem
    27 inch mac lost internal speaker output. Shows a selection for external speakers but not for the internal speaker.The internal speaker work as the Computer makes the normnal nosie that it makes on start up. I can plug external speaker in , and they work, but would prefer to use the internal speakers. Software is up to date
    Look forward to hearing from you
    Many thanks
    Sunnypip

    Hopefully one of these steps should solve the problem.
    System Preference > Sound > Output > Internal Speakers
    Make sure Mute is not enabled.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the appropriate method.
    Best.

  • Qosimo X505 HDMI vs Speaker output.

    My Qosmio X505 HDMI outputs to a big old 50" plasma just beautifully, but, when connected it shuts down my speaker out.. Why? All the check boxes, settings and properties are useless. I need my speaker output... for sound .....The HDTV sound sucks and I'm using it to do audio and video editing. I can't even use my headphones. Know I know you'll say that the digital signal is more important, and uses more resources...  I'm guessing there is nothing I can do about it... Sound Blaster had one card ... all formats always worked. Everything these days is Integrated right? So  the HDMI  and analogue audio outputs should just work. Sorry to rant. 1st post... 1st big screen.  Thanx in advance
     RT

    When you're connect to the TV, right-click on the speaker icon in the notification area near the clock and select "Playback devices." You should see a list of devices. Right-click on one and ensure "Show Disabled Devices and "Show Disconnected Devices" are checked so you can see everything. To change devices, right-click on a different on and select "Set as Default Device" and "Set as Default Communication Device." You'll likely have a few. On the laptop I'm currently using, I have four - "Speakers" (my internal speakers), "Headphones" (the headphone port on the laptop), "Digital Audio (HDMI)" (my HDMI sound), and another "Speakers" (the headphone jack on my port replicator I'd assume, but I've never used it).
    - Peter

  • Speaker output AND headpho

    im a deejay, i need to know if there is anyway to configure a creative sb Audigy2 ZS Platinum sound card (its a 3d card, it has the platinum dri've too) so that i can have my mixing application play the overall sound output through the speaker outputs, and use the headphones jack on the plat. dri've to preview another song within the same application? basically i want to use the speaker outputs and the headphones jack at the same time. right now, its either or. is it possible?

    Depending on what DJ program you are using, you might be able to specify different output for the front and rear speakers, and hence have 2 different outputs. Unfortunately, I don't know which DJ programs (if any) provide that option. PCDJ-FX doesn't, I know that much.
    You could do what I did! Are you using a laptop? If so, get an external (USB) soundcard, like the "Extigy", or "Li've! 024 External". Plug that into one of your spare USB ports and use that as your main output (for the superior sound quality), and use the built in soundcard headphone socket for cue-ing your songs. Otherwise, if your motherboard has an onboard soundcard, use that.
    The important thing is to ensure Windows recognises that you have two outputs. Go to "Control Panel" -> "Sounds and Audio Devices" -> Audio.
    The "Sound Playback" list needs to have at least two entries for most DJ programs to output two separate sources.

  • Excel Output For Standard Report In R12

    Hi Experts,
    My Client wants Excel Output for Standard Reports ( ex:-Open Purchase Order Report (by cost center)_xml)
    I changed the default output to Excel in Template of xml publisher administrator Responsibility.
    Now it is showing the Excel output, but The layout of report is not same as layout which in text output of standard report.
    Please guide me is there any solution to develop the reports layout in ms-excel using xml file rather than rtf template.
    Thanks
    Durga.

    Hi Alex,
    Thanks for your replay.
    Generating the new rtf template which is same as standard layout is difficult task for us. Actually we have 120 reports which have same requirement.
    Is there any other solution for this . please guide me
    Thanks
    Durga
    Edited by: 805567 on Jan 23, 2012 12:33 PM

  • CANCEL_FLAG in PO Output for Communication

    I'm trying to build logic into an RTF template for the "PO Output for Communication" report to handle cancelled lines. The cancel_flag can be set to "Y" at any of 3 levels - PO Header, PO Line and PO shipment. The field is called the same thing (cancel_flag) at all 3 levels.
    In my rtf template, I have a row in a table to display each PO line using the for-each clause. I do not want to display lines which are cancelled (ie where CANCEL_FLAG (at line level) = 'Y'.
    How do I reference the CANCEL_FLAG specifally at line level (not header, and shipment line)??
    My xml is as follows:
    <?xml version="1.0" encoding="UTF-8"?>
    <PO_DATA>
    <TYPE_LOOKUP_CODE>STANDARD</TYPE_LOOKUP_CODE>
    <SEGMENT1>33832</SEGMENT1>
    <REVISION_NUM>0</REVISION_NUM>
    <PRINT_COUNT>0</PRINT_COUNT>
    <CREATION_DATE>10-DEC-2009 17:42:27</CREATION_DATE>
    <DOCUMENT_BUYER_FIRST_NAME>Happiness</DOCUMENT_BUYER_FIRST_NAME>
    <DOCUMENT_BUYER_LAST_NAME>Makeleni</DOCUMENT_BUYER_LAST_NAME>
    <DOCUMENT_BUYER_TITLE>MS.</DOCUMENT_BUYER_TITLE>
    <DOCUMENT_BUYER_AGENT_ID>4588</DOCUMENT_BUYER_AGENT_ID>
    <CONFIRMING_ORDER_FLAG>N</CONFIRMING_ORDER_FLAG>
    <ACCEPTANCE_REQUIRED_FLAG>N</ACCEPTANCE_REQUIRED_FLAG>
    <CURRENCY_CODE>ZAR</CURRENCY_CODE>
    <CURRENCY_NAME>Rand</CURRENCY_NAME>
    <PAYMENT_TERMS>30 Days 2.5% Discount</PAYMENT_TERMS>
    <VENDOR_NUM>LAP005</VENDOR_NUM>
    <VENDOR_NAME>LAPACK (PTY) LTD</VENDOR_NAME>
    <VENDOR_ADDRESS_LINE1>P O Box 1082</VENDOR_ADDRESS_LINE1>
    <VENDOR_CITY>Isando</VENDOR_CITY>
    <VENDOR_STATE>RSA</VENDOR_STATE>
    <VENDOR_POSTAL_CODE>1600</VENDOR_POSTAL_CODE>
    <VENDOR_COUNTRY>South Africa</VENDOR_COUNTRY>
    <VENDOR_PHONE>9741531</VENDOR_PHONE>
    <SHIP_TO_LOCATION_ID>71695</SHIP_TO_LOCATION_ID>
    <SHIP_TO_LOCATION_NAME>23M CS Isando Personal Care</SHIP_TO_LOCATION_NAME>
    <SHIP_TO_ADDRESS_LINE1>23M CS Isando Personal</SHIP_TO_ADDRESS_LINE1>
    <SHIP_TO_ADDRESS_LINE2>22 Purlin Road</SHIP_TO_ADDRESS_LINE2>
    <SHIP_TO_ADDRESS_INFO>Isando, GP 1600</SHIP_TO_ADDRESS_INFO>
    <SHIP_TO_COUNTRY>South Africa</SHIP_TO_COUNTRY>
    <BILL_TO_LOCATION_ID>78573</BILL_TO_LOCATION_ID>
    <BILL_TO_LOCATION_NAME>Tiger Brands Consumer Manufacturing</BILL_TO_LOCATION_NAME>
    <BILL_TO_ADDRESS_LINE1>P O Box 527</BILL_TO_ADDRESS_LINE1>
    <BILL_TO_ADDRESS_INFO>Paarl, 7620</BILL_TO_ADDRESS_INFO>
    <BILL_TO_COUNTRY>South Africa</BILL_TO_COUNTRY>
    <VENDOR_SITE_ID>95462</VENDOR_SITE_ID>
    <PO_HEADER_ID>711318</PO_HEADER_ID>
    <APPROVED_FLAG>N</APPROVED_FLAG>
    <VENDOR_ID>73269</VENDOR_ID>
    <CLOSED_CODE>OPEN</CLOSED_CODE>
    <ORG_ID>1296</ORG_ID>
    <FIRM_STATUS_LOOKUP_CODE>N</FIRM_STATUS_LOOKUP_CODE>
    <FROZEN_FLAG>N</FROZEN_FLAG>
    <CREATED_BY>7794</CREATED_BY>
    <TERMS_ID>10006</TERMS_ID>
    <RATE_DATE>10-DEC-2009 00:00:00</RATE_DATE>
    <AUTHORIZATION_STATUS>N</AUTHORIZATION_STATUS>
    <LAST_UPDATE_DATE>10-DEC-2009 17:50:02</LAST_UPDATE_DATE>
    <LAST_UPDATED_BY>7794</LAST_UPDATED_BY>
    <SUMMARY_FLAG>N</SUMMARY_FLAG>
    <ENABLED_FLAG>Y</ENABLED_FLAG>
    <LAST_UPDATE_LOGIN>52339081</LAST_UPDATE_LOGIN>
    <CONTERMS_EXIST_FLAG>N</CONTERMS_EXIST_FLAG>
    <PENDING_SIGNATURE_FLAG>N</PENDING_SIGNATURE_FLAG>
    <OU_NAME>CS Consumer National (A90)</OU_NAME>
    <OU_ADDR1>Corporate Hill Office Park</OU_ADDR1>
    <OU_ADDR2>William Nicholl Drive</OU_ADDR2>
    <OU_TOWN_CITY>Bryanston</OU_TOWN_CITY>
    <OU_REGION2>GP</OU_REGION2>
    <OU_POSTALCODE>1768</OU_POSTALCODE>
    <OU_COUNTRY>South Africa</OU_COUNTRY>
    <BUYER_LOCATION_ID>71695</BUYER_LOCATION_ID>
    <BUYER_ADDRESS_LINE1>23M CS Isando Personal</BUYER_ADDRESS_LINE1>
    <BUYER_ADDRESS_LINE2>22 Purlin Road</BUYER_ADDRESS_LINE2>
    <BUYER_CITY_STATE_ZIP>Isando, GP 1600</BUYER_CITY_STATE_ZIP>
    <BUYER_CONTACT_EMAIL>[email protected]</BUYER_CONTACT_EMAIL>
    <VENDOR_FAX>3925820</VENDOR_FAX>
    <TOTAL_AMOUNT>246,321.92</TOTAL_AMOUNT>
    <BUYER_COUNTRY>South Africa</BUYER_COUNTRY>
    <VENDOR_AREA_CODE>011</VENDOR_AREA_CODE>
    <LE_NAME>AI Health Care (Pty) LTD</LE_NAME>
    <LE_ADDR1>Coprporate Hill Office Park</LE_ADDR1>
    <LE_ADDR2>Willima Nicholl Drive</LE_ADDR2>
    <LE_TOWN_CITY>Bryanston</LE_TOWN_CITY>
    <LE_STAE_PROVINCE>GP</LE_STAE_PROVINCE>
    <LE_POSTALCODE>1768</LE_POSTALCODE>
    <LE_COUNTRY>South Africa</LE_COUNTRY>
    <DOCUMENT_CREATION_METHOD>AUTOCREATE</DOCUMENT_CREATION_METHOD>
    <DOCUMENT_TYPE>Standard Purchase Order</DOCUMENT_TYPE>
    <TEST_FLAG>D</TEST_FLAG>
    <DIST_SHIPMENT_COUNT>1</DIST_SHIPMENT_COUNT>
    <DOCUMENT_NAME>Standard Purchase Order 33832, 0</DOCUMENT_NAME>
    <SIGNED>F</SIGNED>
    <AMENDMENT_PROFILE>Y</AMENDMENT_PROFILE>
    <WITH_TERMS>N</WITH_TERMS>
    <IS_ATTACHED_DOC>Y</IS_ATTACHED_DOC>
    <HEADER_SHORT_TEXT>
    </HEADER_SHORT_TEXT>
    <LINES>
    <LINES_ROW>
    <ITEM_REVISION>0</ITEM_REVISION>
    <LINE_NUM>1</LINE_NUM>
    <ITEM_DESCRIPTION>Jar Labelled EA Purity Perf P/Jelly 350ml</ITEM_DESCRIPTION>
    <CANCEL_FLAG>Y</CANCEL_FLAG>
    <UNIT_MEAS_LOOKUP_CODE>Each</UNIT_MEAS_LOOKUP_CODE>
    <ORDER_TYPE_LOOKUP_CODE>QUANTITY</ORDER_TYPE_LOOKUP_CODE>
    <UNIT_PRICE>1.31</UNIT_PRICE>
    <QUANTITY>188032</QUANTITY>
    <PO_HEADER_ID>711318</PO_HEADER_ID>
    <PO_LINE_ID>1198098</PO_LINE_ID>
    <ITEM_ID>114606</ITEM_ID>
    <PRICE_TYPE_LOOKUP_CODE>FIXED</PRICE_TYPE_LOOKUP_CODE>
    <CLOSED_CODE>OPEN</CLOSED_CODE>
    <ORG_ID>1296</ORG_ID>
    <QTY_RCV_TOLERANCE>0</QTY_RCV_TOLERANCE>
    <OVER_TOLERANCE_ERROR_FLAG>WARNING</OVER_TOLERANCE_ERROR_FLAG>
    <FIRM_STATUS_LOOKUP_CODE>N</FIRM_STATUS_LOOKUP_CODE>
    <NEGOTIATED_BY_PREPARER_FLAG>N</NEGOTIATED_BY_PREPARER_FLAG>
    <LAST_UPDATE_DATE>10-DEC-2009 17:42:27</LAST_UPDATE_DATE>
    <LAST_UPDATED_BY>7794</LAST_UPDATED_BY>
    <LINE_TYPE_ID>1</LINE_TYPE_ID>
    <LAST_UPDATE_LOGIN>52339081</LAST_UPDATE_LOGIN>
    <CREATION_DATE>10-DEC-2009 17:42:27</CREATION_DATE>
    <CREATED_BY>7794</CREATED_BY>
    <CATEGORY_ID>1935</CATEGORY_ID>
    <LIST_PRICE_PER_UNIT>1.31</LIST_PRICE_PER_UNIT>
    <TAX_NAME>Std Vat 14%</TAX_NAME>
    <LINE_TYPE>QUANTITY</LINE_TYPE>
    <PURCHASE_BASIS>GOODS</PURCHASE_BASIS>
    <ITEM_NUM>53-60401-</ITEM_NUM>
    <LINE_AMOUNT>246,321.92</LINE_AMOUNT>
    <MATCHING_BASIS>QUANTITY</MATCHING_BASIS>
    <PRICE_DIFF>
    </PRICE_DIFF>
    <LINE_SHORT_TEXT>
    </LINE_SHORT_TEXT>
    <LINE_LOCATIONS>
    <LINE_LOCATIONS_ROW>
    <SHIPMENT_NUM>1</SHIPMENT_NUM>
    <DUE_DATE>22-JAN-2010 00:00:00</DUE_DATE>
    <QUANTITY>188032</QUANTITY>
    <PRICE_OVERRIDE>1.31</PRICE_OVERRIDE>
    <QUANTITY_CANCELLED>0</QUANTITY_CANCELLED>
    <TAXABLE_FLAG>Y</TAXABLE_FLAG>
    <PO_HEADER_ID>711318</PO_HEADER_ID>
    <PO_LINE_ID>1198098</PO_LINE_ID>
    <LINE_LOCATION_ID>1107035</LINE_LOCATION_ID>
    <SHIPMENT_TYPE>STANDARD</SHIPMENT_TYPE>
    <CONSIGNED_FLAG>N</CONSIGNED_FLAG>
    <RECEIVING_ROUTING_ID>2</RECEIVING_ROUTING_ID>
    <ACCRUE_ON_RECEIPT_FLAG>Y</ACCRUE_ON_RECEIPT_FLAG>
    <ORG_ID>1296</ORG_ID>
    <INSPECTION_REQUIRED_FLAG>N</INSPECTION_REQUIRED_FLAG>
    <RECEIPT_REQUIRED_FLAG>Y</RECEIPT_REQUIRED_FLAG>
    <QTY_RCV_TOLERANCE>0</QTY_RCV_TOLERANCE>
    <QTY_RCV_EXCEPTION_CODE>WARNING</QTY_RCV_EXCEPTION_CODE>
    <ENFORCE_SHIP_TO_LOCATION_CODE>WARNING</ENFORCE_SHIP_TO_LOCATION_CODE>
    <ALLOW_SUBSTITUTE_RECEIPTS_FLAG>N</ALLOW_SUBSTITUTE_RECEIPTS_FLAG>
    <DAYS_EARLY_RECEIPT_ALLOWED>0</DAYS_EARLY_RECEIPT_ALLOWED>
    <DAYS_LATE_RECEIPT_ALLOWED>0</DAYS_LATE_RECEIPT_ALLOWED>
    <RECEIPT_DAYS_EXCEPTION_CODE>WARNING</RECEIPT_DAYS_EXCEPTION_CODE>
    <INVOICE_CLOSE_TOLERANCE>0</INVOICE_CLOSE_TOLERANCE>
    <RECEIVE_CLOSE_TOLERANCE>0</RECEIVE_CLOSE_TOLERANCE>
    <SHIP_TO_ORGANIZATION_ID>1282</SHIP_TO_ORGANIZATION_ID>
    <CLOSED_CODE>OPEN</CLOSED_CODE>
    <ENCUMBERED_FLAG>N</ENCUMBERED_FLAG>
    <APPROVED_FLAG>N</APPROVED_FLAG>
    <LAST_UPDATE_DATE>10-DEC-2009 17:42:27</LAST_UPDATE_DATE>
    <LAST_UPDATED_BY>7794</LAST_UPDATED_BY>
    <LAST_UPDATE_LOGIN>52339081</LAST_UPDATE_LOGIN>
    <CREATION_DATE>10-DEC-2009 17:42:27</CREATION_DATE>
    <CREATED_BY>7794</CREATED_BY>
    <QUANTITY_RECEIVED>0</QUANTITY_RECEIVED>
    <QUANTITY_ACCEPTED>0</QUANTITY_ACCEPTED>
    <QUANTITY_REJECTED>0</QUANTITY_REJECTED>
    <QUANTITY_BILLED>0</QUANTITY_BILLED>
    <UNIT_MEAS_LOOKUP_CODE>Each</UNIT_MEAS_LOOKUP_CODE>
    <TAX_USER_OVERRIDE_FLAG>N</TAX_USER_OVERRIDE_FLAG>
    <MATCH_OPTION>R</MATCH_OPTION>
    <TAX_CODE_ID>10430</TAX_CODE_ID>
    <CALCULATE_TAX_FLAG>N</CALCULATE_TAX_FLAG>
    <VMI_FLAG>N</VMI_FLAG>
    <AMOUNT>246,321.92</AMOUNT>
    <AMOUNT_RECEIVED>0.00</AMOUNT_RECEIVED>
    <AMOUNT_BILLED>0.00</AMOUNT_BILLED>
    <AMOUNT_CANCELLED>0.00</AMOUNT_CANCELLED>
    <AMOUNT_ACCEPTED>0.00</AMOUNT_ACCEPTED>
    <AMOUNT_REJECTED>0.00</AMOUNT_REJECTED>
    <DROP_SHIP_FLAG>N</DROP_SHIP_FLAG>
    <SHIP_TO_LOCATION_ID>71695</SHIP_TO_LOCATION_ID>
    <SHIP_TO_LOCATION_NAME>23M CS Isando Personal Care</SHIP_TO_LOCATION_NAME>
    <SHIP_TO_ADDRESS_LINE1>23M CS Isando Personal</SHIP_TO_ADDRESS_LINE1>
    <SHIP_TO_ADDRESS_LINE2>22 Purlin Road</SHIP_TO_ADDRESS_LINE2>
    <SHIP_TO_ADDRESS_INFO>Isando, GP 1600</SHIP_TO_ADDRESS_INFO>
    <SHIP_TO_COUNTRY>South Africa</SHIP_TO_COUNTRY>
    <NEED_BY_DATE>22-JAN-2010 00:00:00</NEED_BY_DATE>
    <LINE_LOC_SHORT_TEXT>
    </LINE_LOC_SHORT_TEXT>
    <DISTRIBUTIONS>
    <DISTRIBUTIONS_ROW>
    <AMOUNT_DELIVERED>0.00</AMOUNT_DELIVERED>
    <AMOUNT_CANCELLED>0.00</AMOUNT_CANCELLED>
    <DISTRIBUTION_TYPE>STANDARD</DISTRIBUTION_TYPE>
    <PROJECT_ACCOUNTING_CONTEXT>No</PROJECT_ACCOUNTING_CONTEXT>
    <ACCRUE_ON_RECEIPT_FLAG>Y</ACCRUE_ON_RECEIPT_FLAG>
    <ORG_ID>1296</ORG_ID>
    <DESTINATION_TYPE_CODE>INVENTORY</DESTINATION_TYPE_CODE>
    <DESTINATION_ORGANIZATION_ID>1282</DESTINATION_ORGANIZATION_ID>
    <ACCRUAL_ACCOUNT_ID>57175</ACCRUAL_ACCOUNT_ID>
    <VARIANCE_ACCOUNT_ID>117936</VARIANCE_ACCOUNT_ID>
    <PREVENT_ENCUMBRANCE_FLAG>N</PREVENT_ENCUMBRANCE_FLAG>
    <PO_DISTRIBUTION_ID>1160340</PO_DISTRIBUTION_ID>
    <LAST_UPDATE_DATE>10-DEC-2009 17:42:27</LAST_UPDATE_DATE>
    <LAST_UPDATED_BY>7794</LAST_UPDATED_BY>
    <PO_HEADER_ID>711318</PO_HEADER_ID>
    <PO_LINE_ID>1198098</PO_LINE_ID>
    <LINE_LOCATION_ID>1107035</LINE_LOCATION_ID>
    <SET_OF_BOOKS_ID>1</SET_OF_BOOKS_ID>
    <CODE_COMBINATION_ID>57172</CODE_COMBINATION_ID>
    <QUANTITY_ORDERED>188032</QUANTITY_ORDERED>
    <LAST_UPDATE_LOGIN>52339081</LAST_UPDATE_LOGIN>
    <CREATION_DATE>10-DEC-2009 17:42:27</CREATION_DATE>
    <CREATED_BY>7794</CREATED_BY>
    <QUANTITY_DELIVERED>0</QUANTITY_DELIVERED>
    <QUANTITY_BILLED>0</QUANTITY_BILLED>
    <QUANTITY_CANCELLED>0</QUANTITY_CANCELLED>
    <REQ_DISTRIBUTION_ID>1124422</REQ_DISTRIBUTION_ID>
    <DELIVER_TO_LOCATION_ID>71695</DELIVER_TO_LOCATION_ID>
    <DELIVER_TO_PERSON_ID>4585</DELIVER_TO_PERSON_ID>
    <RATE_DATE>10-DEC-2009 00:00:00</RATE_DATE>
    <AMOUNT_BILLED>0.00</AMOUNT_BILLED>
    <ACCRUED_FLAG>N</ACCRUED_FLAG>
    <ENCUMBERED_FLAG>N</ENCUMBERED_FLAG>
    <RECOVERABLE_TAX>34,485.07</RECOVERABLE_TAX>
    <NONRECOVERABLE_TAX>0.00</NONRECOVERABLE_TAX>
    <RECOVERY_RATE>100.00</RECOVERY_RATE>
    <DESTINATION_CONTEXT>INVENTORY</DESTINATION_CONTEXT>
    <DISTRIBUTION_NUM>1</DISTRIBUTION_NUM>
    <CHARGE_ACCOUNT>53-230-999-84-7220-0000</CHARGE_ACCOUNT>
    <FULL_NAME>Mokoena, Johanna</FULL_NAME>
    <EMAIL_ADDRESS>[email protected]</EMAIL_ADDRESS>
    <REQUESTER_DELIVER_FIRST_NAME>Johanna</REQUESTER_DELIVER_FIRST_NAME>
    <REQUESTER_DELIVER_LAST_NAME>Mokoena</REQUESTER_DELIVER_LAST_NAME>
    </DISTRIBUTIONS_ROW>
    </DISTRIBUTIONS>
    </LINE_LOCATIONS_ROW>
    </LINE_LOCATIONS>
    </LINES_ROW>
    </LINES>
    <ADDRESS_DETAILS>
    <ADDRESS_DETAILS_ROW>
    <LOCATION_ID>71695</LOCATION_ID>
    <ADDRESS_STYLE>ZA_GLB</ADDRESS_STYLE>
    <ADDR_LABEL_1>Address Line 1</ADDR_LABEL_1>
    <ADDR_LABEL_2>Address Line 2</ADDR_LABEL_2>
    <ADDR_LABEL_3>Address Line 3</ADDR_LABEL_3>
    <ADDR_LABEL_4>Address Line 4</ADDR_LABEL_4>
    <ADDR_LABEL_5>Town / City</ADDR_LABEL_5>
    <ADDR_LABEL_6>Postal Code</ADDR_LABEL_6>
    <ADDR_LABEL_7>Province</ADDR_LABEL_7>
    <ADDR_LABEL_8>Country</ADDR_LABEL_8>
    <ADDR_DATA_1>23M CS Isando Personal</ADDR_DATA_1>
    <ADDR_DATA_2>22 Purlin Road</ADDR_DATA_2>
    <ADDR_DATA_5>Isando</ADDR_DATA_5>
    <ADDR_DATA_6>1600</ADDR_DATA_6>
    <ADDR_DATA_7>GP</ADDR_DATA_7>
    <ADDR_DATA_8>ZA</ADDR_DATA_8>
    </ADDRESS_DETAILS_ROW>
    <ADDRESS_DETAILS_ROW>
    <LOCATION_ID>78573</LOCATION_ID>
    <ADDRESS_STYLE>ZA_GLB</ADDRESS_STYLE>
    <ADDR_LABEL_1>Address Line 1</ADDR_LABEL_1>
    <ADDR_LABEL_2>Address Line 2</ADDR_LABEL_2>
    <ADDR_LABEL_3>Address Line 3</ADDR_LABEL_3>
    <ADDR_LABEL_4>Address Line 4</ADDR_LABEL_4>
    <ADDR_LABEL_5>Town / City</ADDR_LABEL_5>
    <ADDR_LABEL_6>Postal Code</ADDR_LABEL_6>
    <ADDR_LABEL_7>Province</ADDR_LABEL_7>
    <ADDR_LABEL_8>Country</ADDR_LABEL_8>
    <ADDR_DATA_1>P O Box 527</ADDR_DATA_1>
    <ADDR_DATA_5>Paarl</ADDR_DATA_5>
    <ADDR_DATA_6>7620</ADDR_DATA_6>
    <ADDR_DATA_8>ZA</ADDR_DATA_8>
    </ADDRESS_DETAILS_ROW>
    <ADDRESS_DETAILS_ROW>
    <LOCATION_ID>71715</LOCATION_ID>
    <ADDRESS_STYLE>ZA_GLB</ADDRESS_STYLE>
    <ADDR_LABEL_1>Address Line 1</ADDR_LABEL_1>
    <ADDR_LABEL_2>Address Line 2</ADDR_LABEL_2>
    <ADDR_LABEL_3>Address Line 3</ADDR_LABEL_3>
    <ADDR_LABEL_4>Address Line 4</ADDR_LABEL_4>
    <ADDR_LABEL_5>Town / City</ADDR_LABEL_5>
    <ADDR_LABEL_6>Postal Code</ADDR_LABEL_6>
    <ADDR_LABEL_7>Province</ADDR_LABEL_7>
    <ADDR_LABEL_8>Country</ADDR_LABEL_8>
    <ADDR_DATA_1>Corporate Hill Office Park</ADDR_DATA_1>
    <ADDR_DATA_2>William Nicholl Drive</ADDR_DATA_2>
    <ADDR_DATA_5>Bryanston</ADDR_DATA_5>
    <ADDR_DATA_6>1768</ADDR_DATA_6>
    <ADDR_DATA_7>GP</ADDR_DATA_7>
    <ADDR_DATA_8>ZA</ADDR_DATA_8>
    </ADDRESS_DETAILS_ROW>
    <ADDRESS_DETAILS_ROW>
    <LOCATION_ID>71699</LOCATION_ID>
    <ADDRESS_STYLE>ZA_GLB</ADDRESS_STYLE>
    <ADDR_LABEL_1>Address Line 1</ADDR_LABEL_1>
    <ADDR_LABEL_2>Address Line 2</ADDR_LABEL_2>
    <ADDR_LABEL_3>Address Line 3</ADDR_LABEL_3>
    <ADDR_LABEL_4>Address Line 4</ADDR_LABEL_4>
    <ADDR_LABEL_5>Town / City</ADDR_LABEL_5>
    <ADDR_LABEL_6>Postal Code</ADDR_LABEL_6>
    <ADDR_LABEL_7>Province</ADDR_LABEL_7>
    <ADDR_LABEL_8>Country</ADDR_LABEL_8>
    <ADDR_DATA_1>Coprporate Hill Office Park</ADDR_DATA_1>
    <ADDR_DATA_2>Willima Nicholl Drive</ADDR_DATA_2>
    <ADDR_DATA_5>Bryanston</ADDR_DATA_5>
    <ADDR_DATA_6>1768</ADDR_DATA_6>
    <ADDR_DATA_7>GP</ADDR_DATA_7>
    <ADDR_DATA_8>ZA</ADDR_DATA_8>
    </ADDRESS_DETAILS_ROW>
    </ADDRESS_DETAILS>
    </PO_DATA>
    I'm really stumped. I tried using the choose when clause but it doesn't work as I think it isreading the wrong cancel flag.
    Any help will be much appreciated.
    Thanks, Ash

    have to see your for-each statements.
    and you can do it, by using .. to go up one level
    example from current level to go up4 level up ../../../../CUSTOM_FLAG
    ../../../CUSTOM_FLAG three lvl up.
    Need to know the cancel_flag element you said, i can see only one :) in the given xml.

  • Cancel_flag in PO Output for Communication report

    I'm trying to build logic into an RTF template for the "PO Output for Communication" report to handle cancelled lines. The cancel_flag can be set to "Y" at any of 3 levels - PO Header, PO Line and PO shipment. The field is called the same thing (cancel_flag) at all 3 levels but it doesn't always exist at all 3 levels. What do I call the field in my "IF" statement, so that it is looking at the correct field? Right now, if I am at the line level and I want to check the cancel_flag, if it doesn't exist, it looks at the cancel_flag at the shipment level.

    have to see your for-each statements.
    and you can do it, by using .. to go up one level
    example from current level to go up4 level up ../../../../CUSTOM_FLAG
    ../../../CUSTOM_FLAG three lvl up.
    Need to know the cancel_flag element you said, i can see only one :) in the given xml.

Maybe you are looking for