Speaker plug on intel iMac not working

My speaker connection for my intel iMac is not working. The built in speakers are working fine. What can I check? Thx

Has nobody got Rise of Nations ? surely someone has at least tried installing it ? I'm just hoping that its a rosetta thing and maybe a fix comes out for it to work ?

Similar Messages

  • Rise of Nations game on Intel iMac not working ?

    I have a 20" iMac Intel 2ghz Ram and the upgraded graphics memory (256mb) and I tried installing Rise of Nations but it doenst work, It installs okay and even goes through the intro movie but then it just hangs on the main title screen. Has anyone with an intel Mac got it working ?
    It would be a shame that I couldnt get it to work when its not that old a game.

    Has nobody got Rise of Nations ? surely someone has at least tried installing it ? I'm just hoping that its a rosetta thing and maybe a fix comes out for it to work ?

  • New keyboard and intel iMac not working at startup with Leopard. Help?

    Hi,
    I'm using an Intel Core Duo 20" iMac and Apples' new keyboard. With Tiger, at first the keyboard wasn't recognized by the system during startup. After installing keyboard software update 1.2 everything worked fine.
    Now I've installed Leopard and I'm back to where I was: the keyboard again isn't recognized at startup, so I'm forced to use the remote during startup to change to the windows partition , and I'm not able to reset PRAM settings.
    Anyone with a solution?
    Thanks

    Start-up commands are NOT recognized on Core Duos - YET...
    there is an expected firmware update in the near future
    for all start-up commands - use the old keyboard
    ALSO - holding down the menu button on your remote during start-up allows you to select a start-up drive while moving with the control function
    +found that by accident...+
    Thanks,
    den
    .

  • The Left speaker of my iPhone is not working.. Is there a way to*

    The Left speaker of my iPhone is not working.. Is there a way to correct it... Actually if I connect iPhone to aux in of my car even then the left speakers of my car also won't work. Any suggestions?

    There is no left speaker.
    As the manual clearly shows there is only one speaker at the bottom of all iphones.  The other is a mic.

  • Speaker on phone calls will not work, how can I fix this? I have already done system restart and reset to manufature default.

    speaker on phone calls will not work, how can I fix this? I have already done system restart and reset to manufature default. I also have no voice with Safari or any other apps including music!

    If your speaker is broken, then you may need to get a repair done.
    Are you unable to hear anything at all, or is it just one speaker in particular?
    If it is just one speaker, where's it located?

  • The raise to speak feature on Siri does not work

    The raise to speak feature on Siri does not work anymore is there any possible fixes for this

    I had the same problem (iPhone 5), but the fix was simple.
    Turn off your Bluetooth.  Yeah, I know this sounds crazy.  Here's why.
    When you use Siri with the "Raise to Speak" feature activated (Settings/General/Siri), this enables the proximity sensor that lets the iPhone know it is near your ear, activates Siri, and turns off the display.
    However, if you are using a bluetooth headset (like I do), then this sensor is turned off automatically, because you will be speaking thru your bluetooth and not the iPhone to activate Siri and make calls.
    To prove this, do the following test.
    Make sure "Siri" is on, and "Raise to Speak" is on (Settings/General/Siri).
    Turn off your Bluetooth (Settings/Bluetooth).
    (TEST) Hold your phone in front of you, and with a natural motion, bring the phone to your ear (as if you are answering a call).  Siri will automatically activate, assuming you want to ask it/her a question (very cool feature). And the screen will turn offautomatically.
    If you have never used the "Raise to Speak" feature, this feature automatically activates Siri when you raise the phone to your ear (really a cool and helpful feature). It may take a little practice to get used to this.  I struggled at first, but soon got the hang of using a natural motion to bring the phone to my ear.  Starting with the phone in front of you, the phone should be "almost" parallel to the ground when it gets to your ear.  It may take several practice tries to get it, but you will get it, and you will be hooked on this neat little feature.
    Ok, with this done, this proves your proximity sensor is funtioning properly.
    Now, turn on your Bluetooth (Settings/Bluetooth).
    And repeat the same (TEST) above.
    This time, Siri should not activate, and the screen should not go off.  Why? This is because your voice communications with callers (and Siri), are now going thru your Bluetooth, and not the phone handset.  Because of this, their is no need for the proximity sensor, so it is automatically turned off (when Bluetooth is on).
    I can only speak for me and my situation, and what worked for me.  However, their may be other issues regarding the proximity sensor separate of this that I am not aware of.
    I hope this helps you.
    Man I love the "Raise to Speak" feature, you will too.
    God Bless You All.

  • The left speaker of my iphone is not working, what should i do?

    the left speaker of my iphone is not working, what should i do?

    There is no "left speaker". It's a microphone... Try looking at the manual.

  • Speaker and main button does not work

    My iphone suddenly fall down and after my speaker and main button is not working. other things are ok. So how can I fix this hardware problem?

    Send it to a Apple Store to request for repairs.
    Or restart the iPhone and see if the home button will work again. It could be that the OS is not detecting it or is not responding.

  • My speaker in iphone 4s is not working from yesterday ..it happened suddenly while listening to songs....do anyone had this pblm and how u resolved it?

    my speaker in iphone 4s is not working from yesterday ..it happened suddenly while listening to songs....do anyone had this pblm and how u resolved it?

    I got this problem solved and just want to let others know what it was.
    I followed ewdel1's advice and brought my phone in to have it looked at and sure enough, was told that this is a problem others have had and it was due to a faulty integrated circuit.  Luckily, I was able to take this in to be looked at when I did because my 1 year warranty was about to expire in a week.
    Apple replaced my 4S with a "new" phone.  The replacement looks and works good as new, so happy I didn't have to go through a hassle and the replacement was very straightforward.

  • Speaker and audio jack is not working

    My laptop speaker and headphone jack is not working.So am not able listen anything on laptop.Please give me a solution on it.

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion g series Notebook and issues with the sound. Here is a link to help troubleshoot issues with the sound. Please note remove any and all USB devices. Disconnect all non-essential devices and headphones, as these could cause some issues. Here is an automated tool for troubleshooting Windows 7. It has a built in Audio repair built into it. I hope this helps with the sound. Thanks.

  • My internal speaker on my MBP is not working

    My internal speaker on my MBP is not working. It appears as follows (screen). After connect the external speaker, sound is working. Yesterday after restart sound in internal speakers works but only a moment. Please advice.

        I'm happy to help with any of your wireless service needs. However, I'm having trouble understanding what you are attempting to do. Please clarify what you are trying to do and what issues you are encountering. Also, please include the model device you have.
    I trust once this additional information is provided we can better assist you.
    VZW_CS
    ^JB
    Follow us on Twitter @VZWSupport

  • HT3964 imac intel monitor not working

    imac intel monitor not working

    Hi Robby62,
    please do report back.
    Also, after you have successfully installed the BootCamp Drivers from the Leopard DVD (which are version 2.0, btw.) you might want to download the 2.1 version update here: http://www.apple.com/downloads/macosx/apple/application_updates/bootcampupdate21 forwindowsvista32.html
    The update also has to be installed while in Windows.
    Have Fun
    Stefan

  • I'm having serious problems with Lightroom plug in for Facebook not working on my iMac. Help!

    It started about a month ago with LR4. I kept getting problems with not being able to publish to Facebook because of problems with the plug-in which had been working perfectly up to then. I had a run round that worked by disableing and reloading the plug in. I upgraded to LR5 but the problem persisted and in fact just became worse. I can no longer publish to facebook from LR. I deleted the LR app in facebook as someone advised but now I cannot re-authorise with Facebook. When I go to the "connect" buton nothing happens. This is a serious problem that may make me reluctantly abandon Lightroom if I cannot find a solution. Can anybody help?

    According to the Lightroom Facebook page, Facebook broke it and Facebook has to fix it- there is no ETA.
    You can read several posts here (with Adobe responses as well) https://www.facebook.com/lightroom?fref=ts&filter=2

  • IMovie 06 with Intel iMac not recognizing camera

    I am using iMovie 06 and love it, however since I have been using it on my Intel iMac, iMovie will not recognize my Canon ZR 70. I thought that it was possibly not compatible, however at work we have an Intel iMac and are running the exact same version on iMovie and the camera is recognized. It is possible that when I installed iMovie 06 that I forgot to select recognize camera; is there a preference or something that I can toss to allow my iMovie to recognize the camera?

    Eric,
    I plugged the HD back in and went to Disk Utility....none of the buttons (Verify Disk, Repair Disk etc) are selectable, and the "Mount" button is also not clickable.
    When this same hard drive is connected to the iBook, the name we've given it appears on the desktop and we can successfully use the device. On this iMac, the name doesn't appear, for example it shows
    149.1 GB etc etc etc
    Macintosh HD
    409.4 GB Iomega
    (name not shown)
    Also, and what may be the problem, is that when I select the external HD and click "Info", it says S.M.A.R.T. Status is Not Supported. How can I get this to work?
    Thanks

  • Plug and play speakers not working properly after upgrading to Windows 8.1

    After upgrading to Windows 8.1, my plug and play speakers do not work properly.  I have uninstalled and reinstalled them, and restarted.  When I try to play music, nothing comes out.  If I turn them off and back on, music will play for approximately 30 seconds, only from one speaker, then it turns off and fades to no sound.  They worked fine until I upgraded to Windows 8.1.  The manufacturer has not been able to successfully assist me.  Has anyone else reported a similar issue after upgrading OS software?  Any suggestions?  These are fairly new speakers, less than 2 years old, and not used very much.  I do have them installed via a K-V switch, and all other devices linked to the K-V switch are functioning properly (monitor and wireless keyboard).  Any suggestions would be greatly appreciated.

    @sisboldt ,
    Hello and thank you for posting on the HP support forums.
    So that I can better help you with your sound issue.  Please post back with your full model and product number.  Use this link to help you find the information.
    HP Notebook PCs - How Do I Find My Model Number or Product Number?
    Here is another link you may find useful.  Please give it a read before posting back with your system information.
    Advice for asking the "Very Best Question"
    Thank you again for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

Maybe you are looking for

  • Handling windows messages within an event structure

    Hello all. I've got an event driven VI which makes use of an event structure. I'd like my VI to be able to respond to some custom windows messages (i.e. WM_USER) sent from a separate process that listens on a telemetry card (sends a message when it r

  • [SOLVED] automount external ntfs disk

    Hello, After Arch fires up I can see my external hard drive in Thunar, however it is not mounted. I have to click on the icon to actually mount it. How can I make this "click" automatic? Thank you. Last edited by totolotto (2012-12-15 10:14:52)

  • Showing BPM attributes in UWL custom columns.

    Hi All, Need help in a query, we have to show BPM attributes in SAP Portal UWL custom columns. We could get information on adding new Custom column in UWL iView but did not find any documentation on how to map the BPM attributes to the UWL custom col

  • Service Request Information

    Hi Anyone can help me how to use service request in oracle support when i create SR. Thanks Asaad

  • Render Farm Possible in Premiere?

    I multi-machine render in in AE all the time.  (For those who don't know, that's using several different computers to render the same project faster.) Can you do this in Premiere?  The closest solution I've come up with is rendering out and assiging