Speaker pop up menu no longer appears

Airtunes no longer shows the remote speaker menu after iLife '06 installed. Currently iTunes 7.0.2 is installed. I believe it was in place before the iLife '06 installation. I tried disabling IPv6, but to no avail. Do you have any suggestions as to how I can get the remote speakers working again? I am most appreciative for any help.
Powermac G4 version 3,3 Mac OS X (10.4.8)

Safari 6
Block pop-ups is moved to Safari Preferences.
Safari > Preferences > Security
Web Content
Check mark the box for "Block pop-ups" to enable it.
Best.

Similar Messages

Search field pop-up menu no longer displays

For some reason my search field pop-up menu no longer displays. I can still search, but the results are not consistent and since the pop-up menu is missing I can't select search options like to, from, etc.
I have already recreated the envelope index and reset spotlight. Any other ideas?

Right-click on a blank area of the toolbar in Mail (where the Search field should be) and choose "Customise Toolbar...". Then in the window that appears, drag the Search item back into the Toolbar.

Print menu different since upgrading to Lion 10.7.4. Pop up menu no longer has Preview and lost paper size selection. Photos all printing credit card size. Still using iPhoto 6.0.6. Have upgraded printer drivers.

Print menu is different since upgrading to Lion 10.7.4. Pop up menu no longer has Preview and lost paper size selection. Photos are all printing credt card size and I can't get it changed. (Have tried changing in Page Setup.) Have upgraded my printer drivers, but still no luck. Still using iPhoto 6.0.6.

A slow boot time can be caused by login items.
User Login Items:
    Flux
    NoSleep
    ClipMenu
    Canon IJ Network Scanner Selector2
    BetterTouchTool
    USBOverdriveHelper
    TotalFinder
    Gmail Notifr
Open System Preferences > Users & Groups > Login Items
Remove one login item noted above then restart your Mac to test. It may be one or multiple items causing the slow boot.

Pop Up Menu Doesn't Appear

Hi, I put together a navbar in Fireworks and added a 6 item
vertical pop up menu to one of the buttons. I used the advice from
http://www.adobe.com/devnet/fireworks/articles/fw8_popups.html
I did it once and it worked fine, then had to redo it in
Fireworks and re-exported it to DW based on the instructions above.
Now the pop up menu won't appear when I preview the revised webpage
that includes the new navbar. When I preview the navbar in
Fireworks or DW everything's fine so I seem to have built it
correctly in FW. The problem seems to just be when I add it into
the webpage in DW. I'm using Insert > Image Objects >
Fireworks HTML and select the htm file that was created by the
export but it won't work!! I get the proper rollovers for all the
buttons but not for the one with the pop up and no pop ups at all.
Also, when I insert it into the webpage in DW design view I get the
buttons randomly separated by spaces across the cell (but the
positioning is fine when previewed) and all of the pop up submenu
items appear below it as name anchors.
Anyone have any tips?

Show us your page. My article just didn't go far enough to
warn people not
to use these menus....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"maitlandclark" <[email protected]> wrote in
message
news:epj6m2$kni$[email protected]..
> Hi, I put together a navbar in Fireworks and added a 6
item vertical pop
> up
> menu to one of the buttons. I used the advice from
>
http://www.adobe.com/devnet/fireworks/articles/fw8_popups.html
>
> I did it once and it worked fine, then had to redo it in
Fireworks and
> re-exported it to DW based on the instructions above.
Now the pop up menu
> won't
> appear when I preview the revised webpage that includes
the new navbar.
> When I
> preview the navbar in Fireworks or DW everything's fine
so I seem to have
> built
> it correctly in FW. The problem seems to just be when I
add it into the
> webpage
> in DW. I'm using Insert > Image Objects >
Fireworks HTML and select the
> htm
> file that was created by the export but it won't work!!
I get the proper
> rollovers for all the buttons but not for the one with
the pop up and no
> pop
> ups at all. Also, when I insert it into the webpage in
DW design view I
> get the
> buttons randomly separated by spaces across the cell
(but the positioning
> is
> fine when previewed) and all of the pop up submenu items
appear below it
> as
> name anchors.
>
> Anyone have any tips?
>
>
>
>
>

Image size pop-up menu no longer an option

"Reduce the size of the attached images by choosing Small, Medium, or Large from the Image Size pop-up menu at the bottom of the message window. The menu appears when you drag or attach a picture to the message."
I used to have this option. I just noticed it isn't there anymore. Tried deleting the mail preference file, but it didn't help.
Any suggestions?
thanks,
clint

Nevermind, I just figured it out. My screen capturing widget saves files as .jpeg instead of .jpg. And Mail didn't like that.

POP UP MENU NO LONGER UNDER SAFARI

I need help with finding how to unblock the pop up menu. Since I upgraded my Safari system yesterday I no longer have anything to check under the Safari pull down menu. There is no block or unblock pop ups. Please email me at [email protected] If anyone knows why my menu to check or uncheck the block pop ups disappeared, please let me know. I need to unblock the pop ups and I can not. Thanks.

Safari 6
Block pop-ups is moved to Safari Preferences.
Safari > Preferences > Security
Web Content
Check mark the box for "Block pop-ups" to enable it.
Best.

Speaker pop up menu doesn't work

Hi
I have been using itunes with an airport express and harman kardon soundsticks. just now it has stopped working, and whatever I select in the speakers pop up menu, they don't work and the sound still comes out of the internal speakers. I notice you don't get the usual delay while itunes 'contacts' the AE either.
Shoudl I just re-intall itunes?

I have just re-installed itunes after deleting iTunes in Applications,
iTunes.pkg in /Library/Receipts,
and com.appleitunes.plist in ~/Library/Preferences.
I still have the problem!
EDIT: I had renamed my itunes folder containing the library etc to "xxxitunes".
Having discovered that my clean install didn't cure the problem, I threw away the new itunes folder and renamed my original one.
Guess what?
Now everything works fine again!
How weird is that?
I had previously tried trashing the "iTunes Music Library.xml" file to no avail .
Some strange buggy behaviour here that makes me nervous now.......

When I click on the gold bookmark icon, the pop up menu does not appear that will let me put tags, folder info etc. How can i get the pop up menu to appear?

After I click on bookmark icon & it turns gold, the pop up menu that lets me add tags, folders, etc doesn't come up.

What happens when you click the star (now colored gold) a second time? See the steps in the process of adding a bookmark by the method you are using. Step 1, step 2....
See: http://support.mozilla.com/en-US/kb/Bookmarks#Making_new_bookmarks

Safari menu no longer appearing in English

I dropped my MacBook Pro from a distance of 2 Feet. Now the Safari menu bar is appearing in Asian characters! Please....any ideas?

Hi Eric,
There's a good chance 3rd party plugins haven't been updated by the software developer as yet. Disable to delete them for now but check the manufacture web site for updates.
You can post here also if you want.
http://discussions.apple.com/category.jspa?categoryID=263
Carolyn

Keyboard character menu no longer appears and I never disabled it (on purpose, at least)

I type frequently in Spanish and not having the accenting feature of the keyboard so quickly and easily there is causing me problems. How can I reactiviate it? It just repeats the key I'm pressing instead now. I never changed any settings or gave the system any commands to change it. Thanks!

Until you get a fix for the broken Character Picker, you can use the usual option keyboard shortcuts.
http://symbolcodes.tlt.psu.edu/accents/codemac.html

Can't save the contents of my pop-up menu

I'm trying to create pop-up menus in Dreamweaver. I created
buttons that are .jpg images. I click on the + sign in Behaviors
and select Show Pop-up Menu. I replace the "New Item" text with my
own text and link it to a page, then I click OK. The dialogue box
closes. When I open it again none of the work I just did is there.
It was not saved. When preview it in a browser the pop-up menu does
not appear.

I posted a link in my previous post to you about these
dreaded popups... did
you read it
http://apptools.com/rants/menus.php
I'd strongly advise that you use another approach to create
the popups.
From your previous post it appears you want to use them with
templates, they
just won't work.
PS: If you don't believe me, all you have to do is a search
of this forum
for previous posts on 'popups' and you'll soon discover the
pit you are
throwing yourself into :)
Nadia
Adobe� Community Expert : Dreamweaver
http://www.csstemplates.com.au
- CSS Templates | Free Templates
http://www.perrelink.com.au
- Web Dev
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
http://www.adobe.com/devnet/dreamweaver/css.html
> I'm trying to create pop-up menus in Dreamweaver. I
created buttons that
> are
> .jpg images. I click on the + sign in Behaviors and
select Show Pop-up
> Menu. I
> replace the "New Item" text with my own text and link it
to a page, then I
> click OK. The dialogue box closes. When I open it again
none of the work I
> just
> did is there. It was not saved. When preview it in a
browser the pop-up
> menu
> does not appear.
>

POP UP menu for 2 languages

Dear friends...
I need your help with a little problem/doubt with Encore CS5
I´m explain:
In this moment I do a great authoring with Encore for 2 languages /Spanish and French/ I done the authoring except the pop up menus. This authoring have 2 -main menu- with 2 different desings, one for each language. I done 2 pop up menus for this authoring, each pop up menu in line whith the -main menu- of your correspondant language, but the program don´t supports 2 pop up menus, then, I done a only pop up menu with 2 pages, one page for each different desing (French/Spanish). Ok, at now all correct... The problem:
When the french people chose your language will appear the french main menu, and I need that the page of pop up menu that will appear when the people push the button on the remote controler is the pag.2 because this page have the desing of pop up menu with the words in french. And in the other hand, when the people in spanish are watching the video in your language, when push the button on the remote controler should appear the page1. that is your pop up menu with the words in spanish language....
How I can do this in Encore CS5?, exist this posibility?
Thank you very much for your help.

Perhaps have a look at this THREAD. With only two Pop-up Menus, you might be able to use the workflow listed down-thread.
Good luck,
Hunt

Pop out menu problems

I put a pop out menu on the second navigation button on this
site. I used the dreamweaver 8's behaviors panel to create it.
In two of the pages the index and the music page the pop-out
menu does not appear when published to the internet.
It does appear when I preview in browser window. I cannot for
the life of me figure this out. I have tried changing
the non- choice in the target window to _parent or _blank and
it still doesn't show up on the internet. I appreciate any and all
help.
Any one out there with some advice?
Thanks,
PB

> Any one out there with some advice?
Yes, but you aren't going to like it. I wouldn't recommend
that anyone use
those menus in DW8. There are much better ways -
http://apptools.com/rants/jsmenu.php
http://apptools.com/rants/menus.php
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"patriciabrowne" <[email protected]> wrote
in message
news:e81fk6$jgh$[email protected]..
>I put a pop out menu on the second navigation button on
this site. I used
>the
> dreamweaver 8's behaviors panel to create it.
> In two of the pages the index and the music page the
pop-out menu does not
> appear when published to the internet.
> It does appear when I preview in browser window. I
cannot for the life of
> me
> figure this out. I have tried changing
> the non- choice in the target window to _parent or
_blank and it still
> doesn't
> show up on the internet. I appreciate any and all help.
> Any one out there with some advice?
> Thanks,
> PB
>

.Mac aliases no longer appearing in Account pop-up menu

Hi, a couple of days ago I noticed that my .Mac aliases are no longer listed in the Account pop-up menu of new messages. I thought it's a temporary .Mac problem, but this has continued.
The account is a .Mac account (not POP nor IMAP), and I can go to Mail>Preferences>Accounts and click on the "Edit Email Aliases" button and can see that they are all still there on .Mac.
How can I get them to show up again?
MacBook Pro Mac OS X (10.4.8)

Hi Hilal.
I don’t know whether this would make a difference, but it may be worth a try:
1. Quit Mail if it’s running.
2. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to solve the problem. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
3. In the Finder, go to ~/Library/Preferences/. Locate com.apple.mail.plist and move it to the Desktop (to be deleted if this fixes the problem).
4. Open Mail. You’ll have to set up your non-.Mac accounts from scratch all over again. If given the option to import existing mailboxes or something like that, don’t. Just enter the account information and Mail will automagically rediscover the data in ~/Library/Mail/ when done.
You’ll also have to re-configure most of your settings in Mail > Preferences. For spam-related security reasons, the first thing you should do is go to Preferences > Viewing and disable Display remote images in HTML messages if it’s enabled.
5. As a side effect of re-creating com.apple.mail.plist, Mail might rename Outbox (which is where messages waiting to be sent are stored) to Delivered. The name of that mailbox is actually a misnomer, as it would contain messages (if any) that couldn’t be delivered for some reason. You can delete that mailbox if you wish.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. You can easily locate any of the folders referred to in this post by copying the folder path here, doing Go > Go to Folder in the Finder, and pasting the folder path there.

TS3147 My printer was no longer being detected, so I uninstalled it and when I went to reinstall it I discovered that I no longer have a printer pop up menu to select my printer.

I had a power failure and then began getting a message that the printer (Canon Pixma 610) was not detected. So, I unplugged it from the computer, restarted the computer and no change. The printer was still showing as the default printer, but not being detected. So I deleted the printer and then tried to reinstall it. However, when I clicked on the + sign to reinstall nothing came up. The screen was blank with no printer choices. I went to the Canon website to try and download the driver and received this message: There is no driver for the OS Version you selected. The driver may be included in your OS or you may not need a driver. I would appreciate any help...

MSG2014 wrote:
I finally contacted Canon and they informed me that my printer is not compatible with Maverick
As Greg stated, the Canon support person is simply referring to what they see on the web and knosw nothing about Mac's. The reality is that the v10.8 driver will work on 10.9. You just may need to get past Gatekeeper to install it. So here is a link to the v10.8 driver. If you get a message stating that the driver is not signed and cannot be installed, then this is Gatekeeper blocking it. So to install it, right click (or Control-click) on the installer and select Open from the pop-up menu. Now you will have the option to install.
The second issue is the printer not appearing in the Add printer window. The USB cable is often the cause as suggested already. Also USB hubs can be a cause. To check if the Mac can see the printer, open System Information and select USB in the left column. The top right pane will show all the USB busses in your Mac. The MP610 should be listed under one of these busses. If it is not present, then try another USB cable and/or another USB port on the Mac. Until you see the MP610 in this view, you will not be able to add the printer.

Speaker pop up menu no longer appears

Similar Messages

Maybe you are looking for