Speaker problem with t420i and adding a new graphics card question

I bought a t420i about a month ago and noticed that the speakers could not properly handle muliple sounds at once. What happens is that, say in a music video, the music plays loud and clear, but once the lyrics start the background music fades a bit to about 85% of it's original volume. I had returned the laptop because of this problem but the replacement I got has the SAME exact problem.
In case im not clear, try this example. You know the beeping noise you get when you press an incompatible set of keys? ( like g, h, and b). When I have this noise going simultaneously with a song, the song's sound fades a bit.
This does not happen with headphones, therefore i believe the problem is with the way the speakers are programmed.
Also, if I bought a t420 with just integrated graphics, could I still add a new graphics card? Or can you only add a new graphics card to a thinkpad that initially comes with discrete graphics?

I think the main purpose of the nvs4200m is the ability to use three displays (internal + 2 external). Additionally, nVidia has better driver support for games so even though it is around the same speed, the drivers are better.
The shared ram is still used, unless you disable the HD3000 in the BIOS and run with only the nvs4200m at all times.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

Similar Messages

TS5376 I'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly.

'm having a problem with downloading and installing the new version of itunes for windows (11.1.4) I have done everything the troubleshooting article has said and it is still not working properly. I have even done a repair to see if that works and it has not. Has anyone else found a new way to get it working?

Try Troubleshooting issues with iTunes for Windows updates.
tt2

Problem with MSI GTX 960 GAMAING 4G graphics card - Please help

So I just bought an MSI GTX 960 GAMING 4G graphics card. My problem is that it seems to randomly decide when it wants to run fine at 1215 MHz, and when it wants to downclock to around 135 MHz. Today for example, I was playing Witcher 3: Game was running fine (~55 FPS) for a few hours because the card was performing at maximum. Then, out of nowehere, I dropped to about 4 FPS. I checked Afterburner, and the core clock went down to 135 MHz, while I was still in game. The card is not overheating during gaming. I have the fans set to 35% speed at all times and the GPU never got hotter than about 50c.
I have the latest nVidia drivers installed. I even tried an earlier set of nVidia drivers and the same things happened. Also yes, it is firmly seated in the PCI-E slot and yes, the power cable is firmly plugged in.
PC Specs:
Intel Core i5 Devils Canyon
Gigabyte GA-Z97N-WIFI mobo
GSkill Sniper 16GB RAM
MSI GTX 960 GAMING 4G graphics card
Antec EDGE 550w PSU
I understand these newer graphics cards have power saving settings built in, but I have my nVidia control panel settings to "Prefer maximum performance" and it doesn't seem to help. It seems my card is putting itself into power saver mode at will. I suppose my PSU could be the culprit even though the recommended PSU is only 400w, and I have 550w. Any ideas?

So it turns out I wasn't running the latest BIOS for my motherboard. I updated my BIOS and cleared CMOS. Everything was running fine for a couple hours. I was playing Witcher 3 at full clock and memory speed. GPU temp was hovering around 62 deg c at 60 FPS. Then after a couple hours, the game crashed. Rebooted my computer, and now I am back to the same issue where the card won't run at full speed in a 3D application. Even ran the Valley benchmark tool again and the card didn't increase speed to compensate.
Do I have a defective card? If so I will get it replaced from Newegg.
Also I don't know if I am running the latest vbios. GPU-Z says I have 84.06.14.00.F3
If there is a newer vbios, I can try to update and see if that does anything. I will try anything before returning this to Newegg. My old video card bit the dust and artifacts everywhere, so I don't have a temp replacement.

Problem with Javascript and opening a new page

Hi,
I'm developping a website with Java Server Faces.
I've a problem with JavaScript.
I have a table, and each row of that table, has a button, to display more information about that specific row. I want to display this information in a new window. For this I want to use JavaScript.
The new window, of course, needs some information of the other window, to show the right data.
The first time I click the 'more-information-button', it works perfectly, but from than on, he keeps showing the same information...
Here is my jsp-page of the first page (the one with the table):
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
    <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
    <f:view>
         <f:loadBundle basename="languages.MessageBundle" var="bundle"/>
        <html>
            <head>
                <meta content="no-cache" http-equiv="Cache-Control"/>
                <meta content="no-cache" http-equiv="Pragma"/>
                <title>- UCV-Period -</title>
                <link href="resources/stylesheet.css" rel="stylesheet" type="text/css"/>
            </head>
            <body style="-rave-layout: grid">
                    <h:dataTable binding="#{UcvPeriod.dataTable1}" headerClass="list-header" id="dataTable1" rowClasses="list-row-even,list-row-odd" rows="5"
                        style="left: 24px; top: 168px; position: absolute" value="#{UcvPeriod.dataTable1Model}" var="currentRow">
                        <h:column binding="#{UcvPeriod.column1}" id="column1">
                            <h:outputText binding="#{UcvPeriod.outputUcvPeriod}" id="outputUcvPeriod" value="#{currentRow['UCVPERIOD']}"/>
                            <f:facet name="header">
                                <h:outputText binding="#{UcvPeriod.outputText2}" id="outputText2" value="#{bundle.ucvPeriod_columnHeader_ucvPeriod}"/>
                            </f:facet>
                        </h:column>
                        <h:column binding="#{UcvPeriod.column11}" id="column11">
                            <h:commandButton action="#{UcvPeriod.btnDetails_action}" binding="#{UcvPeriod.btnDetails}" id="btnDetails" value="+" onclick="window.open('Details.jsp')"/>
                            <f:facet name="header">
                                <h:outputText binding="#{UcvPeriod.outputText21}" id="outputText21" value=""/>
                            </f:facet>
                        </h:column>
                    </h:dataTable>
                </h:form>
            </body>
        </html>
    </f:view>
</jsp:root>Here is my action, when someone clicks on the 'more-information-button':
public String bthnDetails_action() {
   Object s = outputUcvPeriod.getValue();
   BigDecimal ucvPeriod = (BigDecimal)outputUcvPeriod.getValue();
   this.getSessionBean().setUcvPeriod(new Integer(ucvPeriod.intValue());
   return "detail_ucvperiod";
}Here is my constructor of the Detailspage.
    public Details() {
         this.txtUcvPeriod.setValue(this.getSessionBean().getUcvPeriod());
    }Here is the navigation part for this part of my faces-config.xml .
<navigation-rule>
   <from-view-id>/UcvPeriod.jsp</from-view-id>
   <navigation-case>
       <from-outcome>detail_ucvperiod</from-outcome>
       <to-view-id>/UcvPeriod.jsp</to-view-id>
   </navigation-case>
</navigation-rule>Thx a lot....
Anneke

See the tutorial "Sharing Data Between Two Pages" at http://devservices.sun.com/premium/jscreator/standard/learning/tutorials/data_sharing_twopages.html and the FAQ "How can I pass data between pages without creating SessionBean variables in Creator?" at http://devservices.sun.com/premium/jscreator/standard/reference/faqs/technical/javasource/passing_data.html. Since you can open a new window when your button is clicked, the tutorial and FAQ will explain ways to pass your data to the new window.

A problem with Itunes and adding music to library

I've been using my Ipod touch for about a month now (recently purchased). I first connected my Ipod to my laptop, because my desktop needed a format and reinstall of the OS, so I wanted to be slightly organized with it. I finally got around to formatting the desktop to WinXP pro, and have all my programs installed successfully.
Here's the issue:
With my laptop, I could start Itunes, and I did NOT have every song I have as my library, only a few songs that I personally selected and added to library (by clicking on "CTRL+Highligh" or File-->Add file to library). When I did that, I could hold down CTRL and highlight up to 15-20 songs at once, and have them show up in my library as added, then sync them to my Touch.
Since coming to my desktop with my Ipod, and moving all my music from my laptop over to my desktops C: drive, I've hooked up my Ipod and (of course installed Itunes) authorized my desktop for my Touch.
I begain selecting the music I wanted...My directory setup is as follows:
My Music: folders inside of
Itunes directory
Mp3 Directory
My Itunes settings are selected as My Music-->Itunes as the folder. I open Itunes, select add song to library, and it only allows me to highlight UP to 5 songs at once and add them. Any number between 1 and 5 songs will add to my library just fine. If i try to select over 5 songs, like 6-20 songs at once (using CTRL) it does nothing, and doesnt place any of the selected songs in my library. It will allow me to select individual songs just fine, and like I said, I can select UP TO 5 songs, highlighted with CTRL, and they show up just fine (all 5 songs will show in the library.)
Any number of songs selected with CTRL over 5, does nothing.
I dont understand why, when I used this very technique on my laptop, and I could select up to 30 songs at once (using ctrl+highlight) and they would ALL show up as they are supposed to. Everything is nearly the same on here, my settings are all pretty much the same as my laptop's settings were...anyone have any ideas? this has been bugging me all morning, and I've spent so much time fooling with it that I only have 56 songs out of 6,000 on my Ipod touch (I also decided to rid myself of music I didnt listen to and restored/formatted my ipod so I could start over)...I need more than 56 songs, but I dont want to do them 1 or 2 at a time, then go back and have to hit CTRL+O or File--->add file to library.
What causes me to be limited to 5 or less songs per time to add to my library?

Because I wasn't aware that the library could be "taken" from pc to pc. The processor on my desktop is also hyper-threaded, which simulates it having 2 processors..and moving file NAMES, not moving the files into the library is NOT a processor intensive function. It's actually just taking the file location - directory, and name, and making it show in the library..not moving the actual file itself and making a copy of it in the Itunes folder. I do NOT allow itunes to make copies of files that it keeps in the library (I uncheck allow Itunes to organize and make copies of files added to library).
So adding to my library is as simple as making the library show the file name, and pointing to the location on disk, not actually making a copy of the file in the background and placing it into a folder inside the Itunes folder.
Had I KNOWN I could take my library off the desktop and move it, I would've made it easier on myself, but I thought I posted that I just recently bought this Ipod touch (about a month ago).

Problems with ARD and headless MacMini (new 1,66 DualCore)

Hi,
i would like to set my brandnew MacMini 1,66 as webserver.
And there the problem starts: when the MacMini runs headless (without monitor attached) it thinks that there is a television attached and i get a very distorted screen when connecting via ARD 2.2. Attaching the DVI-VGA adapter does not help!
How can i tell the Mini to switch to a "normal" resolution without attaching a monitor?
I seems not to be very useful to connect a monitor to a computer that is supposed to run headless...
HELP!!!
1.66GHz Intel Core Duo processor Mac OS X (10.4.7) ARD 2.2

I have the exact same problem with two PowerMac G5's. I need to have full resolution on the remote G5 which has no monitor connected, but only get to choose between PAL and NTSC TV resolution. This is really annoying, and in my opinion a major bug in ARD 3.1 and below. Why is the user forced to see such a small remote window if the remote computer is capable of much more?

Adding a new graphics card

I have a first generation 1.8ghz Power Mac G5 with Final Cut Studio installed. I want to upgrade my graphics card so I can add some plugins as well as FCStudio2. What are my options for a good graphics card? I am currently working in SD but sometime in 2009 I want to switch over to HD.
Any suggestions would be cool.
Thanks.

I am assuming that your G5 is AGP architecture, a bit long in the tooth, but you should figure this out, I know Apple.com/support has specs listed for legacy machines somewhere.
I don't like to buy anything from this retailer but they do have a nice section to tell you what is available for your particular machine. http://www.macsales.com/

[HELP] Problem with restore and recovery to new host

Hi, guys!
I have been trying for two days, but still cannot get it to work.
I have taken a full hot(online) backup with archive logs as well as the control file and SPFILE, and then copied the backup to the new host with the same directory structure and settings. Finally, I have tried to restore & recover the database on the new host but failed during the restore process.
Both the original host and the new host have the same Oracle installed down to the patch level. I couldn't figure out the proper solution to this problem base on my limited knowledge about Oracle DB.
Could anyone help me out here? Any advice would be appreciated!
RMAN> restore database until sequence 10 thread 1;
Starting restore at 08-NOV-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01.DBF
restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01.DBF
restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01.DBF
restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01.DBF
restoring datafile 00005 to D:\ORA_DATADATA01.DBF
restoring datafile 00006 to D:\ORA_DATA\DATA02.DBF
restoring datafile 00007 to D:\ORA_DATA\INDX01.DBF
restoring datafile 00008 to D:\ORA_DATA\INDX02.DBF
channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC
OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BK
P
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2011 11:41:33
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
Here is some extra information that you might want to know about:
RMAN> list incarnation;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 PRODDB 3774691295 PARENT 1 17-APR-07
2 2 PRODDB 3774691295 PARENT 521803 06-OCT-11
3 3 PRODDB 3774691295 PARENT 1595143 20-OCT-11
4 4 PRODDB 3774691295 PARENT 1600974 20-OCT-11
5 5 PRODDB 3774691295 PARENT 1952053 27-OCT-11
6 6 PRODDB 3774691295 CURRENT 2146951 07-NOV-11
RMAN> list backup recoverable;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
37 Full 822.34M DISK 00:29:47 07-NOV-11
BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20111107T175037
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BKP
List of Datafiles in backup set 37
File LV Type Ckp SCN Ckp Time Name
1 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\SYSTEM01.DBF
2 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\UNDOTBS01.DBF
3 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\SYSAUX01.DBF
4 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\USERS01.DBF
5 Full 2149673 07-NOV-11 D:\ORA_DATA\DATA01.DBF
6 Full 2149673 07-NOV-11 D:\ORA_DATA\DATA02.DBF
7 Full 2149673 07-NOV-11 D:\ORA_DATA\INDX01.DBF
8 Full 2149673 07-NOV-11 D:\ORA_DATA\INDX02.DBF
BS Key Type LV Size Device Type Elapsed Time Completion Time
38 Full 6.95M DISK 00:00:03 07-NOV-11
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20111107T182034
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_07\O1_MF_S_766606834_7CH8Q439_.BKP
Control File Included: Ckp SCN: 2151141 Ckp time: 07-NOV-11
SPFILE Included: Modification time: 07-NOV-11
BS Key Size Device Type Elapsed Time Completion Time
39 18.46M DISK 00:00:05 08-NOV-11
BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093359
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
2011_11_08\O1_MF_ANNNN_TAG20111108T093359_7CJY7TG1_.BKP
List of Archived Logs in backup set 39
Thrd Seq Low SCN Low Time Next SCN Next Time
1 1 2146951 07-NOV-11 2149493 07-NOV-11
1 2 2149493 07-NOV-11 2149519 07-NOV-11
1 3 2149519 07-NOV-11 2149565 07-NOV-11
1 4 2149565 07-NOV-11 2149641 07-NOV-11
1 5 2149641 07-NOV-11 2172859 07-NOV-11
1 6 2172859 07-NOV-11 2197851 07-NOV-11
1 7 2197851 07-NOV-11 2220349 08-NOV-11
1 8 2220349 08-NOV-11 2222621 08-NOV-11
1 9 2222621 08-NOV-11 2222729 08-NOV-11
1 10 2222729 08-NOV-11 2223088 08-NOV-11
BS Key Type LV Size Device Type Elapsed Time Completion Time
40 Full 6.95M DISK 00:00:00 08-NOV-11
BP Key: 40 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093411
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP
Control File Included: Ckp SCN: 2223097 Ckp time: 08-NOV-11
SPFILE Included: Modification time: 08-NOV-11
Thanks in advance!
Jay

Thank you for your reply,Hemant K Chitale!
>
a) Does the directory structur exist on the new server :
D:\DBDATA\PRODDB\ --- for files 1 to 4
D:\ --- for file 5
D:\ORA_DATA\ --- for files 6 to 8
>
Yep, I have doubled check the directory structure that get in the way, and they are all exist.
Would it be something to do with the folder permissions?
>
b) Apparently a RESETLOGS has been issued on 07-Nov. Which controflile backup do you have restored and mounted on the new server ? It should be the one after the RESETLOGS.
>
I restored the one included with the backup. Should I take another backup of controlfile seperately and restore from it instead?
>
(I assume that you did a RESTORE CONTROLFILE followed by sql "alter database mount" before the attempt to RESTORE DATABASE)
>
Yep, that's exactly what I did.
//executed @ RMAN prompt of the new host
startup nomount; 'the new host has the right SPFILE to start with so i didn''t bother to RESTORE SPFILE first.
restore controlfile from autobackup;
alter database mount;
restore database sequence 10 thread 1;
//get stucked here with RMAN-06026, 06023
//...the following is not executed yet.... :-(
recover database until sequence 10;
alter database open resetlogs;Edited by: HappyJay on 2011/11/08 13:25
I have made several attemps with your advice, but still get the same type of errors.
Here is the output:
RMAN> list backup of controlfile;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
38 Full 6.95M DISK 00:00:03 07-NOV-11
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20111107T182034
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_07\O1_MF_S_766606834_7CH8Q439_.BKP
Control File Included: Ckp SCN: 2151141 Ckp time: 07-NOV-11
BS Key Type LV Size Device Type Elapsed Time Completion Time
40 Full 6.95M DISK 00:00:00 08-NOV-11
BP Key: 40 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093411
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
+\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP+
Control File Included: Ckp SCN: 2223097 Ckp time: 08-NOV-11
as you suggested, this backup piece of controlfile should be right one to be restored.
RMAN> shutdown;
database dismounted
Oracle instance shut down
RMAN> startup nomount;
connected to target database (not started)
Oracle instance started
Total System Global Area 490733568 bytes
Fixed Size 1291360 bytes
Variable Size 364907424 bytes
Database Buffers 121634816 bytes
Redo Buffers 2899968 bytes
RMAN> restore controlfile from autobackup;
Starting restore at 08-NOV-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=157 devtype=DISK
recovery area destination: C:\oracle\product\10.2.0\flash_recovery_area
database name (or database unique name) used for search: PRODDB
channel ORA_DISK_1: autobackup found in the recovery area
channel ORA_DISK_1: autobackup found: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AR
EA\PRODDB\AUTOBACKUP\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP
channel ORA_DISK_1: control file restore from autobackup complete
output filename=D:\DBDATA\PRODDB\CONTROL01.CTL
output filename=D:\DBDATA\PRODDB\CONTROL02.CTL
output filename=D:\DBDATA\PRODDB\CONTROL03.CTL
Finished restore at 08-NOV-11
tried shutdown normally and mount again instead.
RMAN> shutdown;
Oracle instance shut down
RMAN> exit
Recovery Manager complete.
C:\>rman target /
Recovery Manager: Release 10.2.0.3.0 - Production on Tue Nov 8 13:49:42 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database (not started)
RMAN> startup mount;
Oracle instance started
database mounted
Total System Global Area 490733568 bytes
Fixed Size 1291360 bytes
Variable Size 369101728 bytes
Database Buffers 117440512 bytes
Redo Buffers 2899968 bytes
RMAN> restore database until sequence 10 thread 1;
Starting restore at 08-NOV-11
Starting implicit crosscheck backup at 08-NOV-11
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
Crosschecked 3 objects
Finished implicit crosscheck backup at 08-NOV-11
Starting implicit crosscheck copy at 08-NOV-11
using channel ORA_DISK_1
Crosschecked 2 objects
Finished implicit crosscheck copy at 08-NOV-11
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP\2011_11_
08\O1_MF_S_766661651_7CJY84LK_.BKP
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01.DBF
restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01.DBF
restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01.DBF
restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01.DBF
restoring datafile 00005 to D:\ORA_DATA\DATA01.DBF
restoring datafile 00006 to D:\ORA_DATA\DATA02.DBF
restoring datafile 00007 to D:\ORA_DATA\INDX01.DBF
restoring datafile 00008 to D:\ORA_DATA\INDX02.DBF
channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC
OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BK
P
failover to previous backup
//however, still get the same results(ended up with errors)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2011 13:50:29
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
Edited by: HappyJay on 2011/11/08 13:59

Problem with Autofill and adding songs

I just purchased a second generation iPod shuffle. When I first loaded my iPod all of the songs in my itunes library automatically loaded onto my shuffle. The problem is, that I now cannot add or delete songs. I keep getting the error "the iPod cannot be synced. The disk could not be read from or written to".
After reading some posts I downloaded the reset software and reset my iPod, but again I had the same problems. What I did to resolve this was to delete songs from my Library that I did not want on my iPod, then I reset it and the songs in my library automatically loaded again.
Still I cannot change the order, or add songs, or I get the same error message. Can anyone help?
Windows XP

In order to stop the iPod getting filled automatically, you need to follow the steps below.
Click on the iPod icon on the source list under "Devices” and to the right we will see the settings/contents tab. Under the "settings" tab click on the "Restore" button.
Once it is restored, we will see a "iPod setup assistant" where you can name the iPod. Just below that you will get an option to "Automatically choose songs for the iPod" . Uncheck that option and click on OK.
=================================================
For the error mesage "Disk cannot be read from or written to" when syncing iPod you need to folow the below article and the links.
http://docs.info.apple.com/article.html?artnum=301267
===============================================
Moreover with Windows XP we need to have service pack 2 installed as its the basic system requirement for iPod and iTunes.
Click on the START button, click on RUN and type "winver" and then press ENTER.
You will see "Service Pack" (SP) followed by a number in a pop up window.
If you do not have SP2 , I would suggest you to install the "service pack 2" for the operating system from the below URL:
http://www.microsoft.com/windowsxp/sp2/default.mspx
===============================================

Please help meeee!! Problems with library and syncing on new laptop

Hi I've bought a new laptop and want to start using itunes on the new one, however:
Problem 1- Even though I've enabled both devices and have clicked on the home sharing, only the songs I have purchased from itunes show in my library and playlists (I managed to import my playlist titles by copying the file and emailing it to myself but it won't show songs other than those purchased from itunes) How can I get the library to show the 500 odd songs I've painstakingly spent importing to itunes on my old, slow laptop? If I have to do them all again I may just have a breakdown!!!
Problem 2- Have imported a CD into itunes library using my new laptop but it won't show on my ipod after syncing it. I think I have enough space cos the bottom bar says 3.26 GB free!
I'm really not very techie and don't use itunes much so there may be something glaringly obvious that I'm doing wrong. If anyone can help I'd really appreciate it
Thanks
Cheryl

Home Sharing doesn't really matter, if you plan to stop using the old computer for iTunes.
Apple has this document
http://support.apple.com/kb/HT4527
You should use the method titled External drive. If you use this method, you can ignore the rest of the document.
The details are in the document, but to summarize this process (so that you have the "big picture" before reading the details)...
You are copying your iTunes folder from the old laptop to the external drive, and then copying that iTunes folder from the external drive to the new laptop. When you copy the iTunes folder to the new laptop, you are replacing the existing iTunes folder. The next time you start up iTunes on the new laptop, it will use the iTunes folder from the old laptop, and it should look like iTunes running on the old laptop.
When you read through the document, it may be easier to understand if you keep my "overview" in mind. Please ask any questions you may have about the "details" in the document.
NOTE: If you have new songs on the new laptop that are not in your old laptop's iTunes library, you need to keep the existing iTunes folder on the new laptop. After you have successfully transfered your iTunes folder from the old laptop to the new laptop, and everything is OK when you run iTunes on the new laptop, THEN add the new songs. This is in the document.
You should put Problem 2 aside until the above is completed.

When adding a new graphic card the computer stuck when i see the hp logo.

wats in my pc:
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
NVIDIA GeForce GTX 550Ti (old one)
Pegatron IPISB-CH2
BIOS Version/Date AMI 7.12, 12-10-2011
memory 3X 4GB PC3-10600(DDR3-1333)
SSD Samsung evo 850 500gb &
HDD HP 2TB 7.2K RPM SATA 3.5 Inch HDD
Power HP PSU 460W Bordeaux-C (Active PF
I've now updated my grapic card to a ASUS STRIX-GTX970-DC2OC-4GD5 (new one)
When i put the grapic card in the system won't start i get a blue screen with the hp logo, and could not get into the boot menu or anything.
Anyone has a solution for me, i'm desperate now.

Hi,
And the old "NVIDIA GeForce GTX 550Ti " only uses 116W, it needs only 400W PSU minimum:
http://www.geforce.com/hardware/desktop-gpus/geforce-gtx-550ti/specifications
>> ASUS STRIX-GTX970 this one uses 225W.
Only for the card itself, you have to run OTHER COMPONENTS of your computer. Just make a calculation:
Your machine has 460W to run a 116W video card, now you uses 225W video card or 225W - 116W = 109W more, you need 460W + 109W or 570W PSU.
Hope this makes sense.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

3000 j115 A11 stopped working after installing new graphics card

I thought i would be slick and install a new graphics card (asus GEForce 8500GT) after i put it in my 3000 j115 A11 everything stopped working. I can turn the tower on and it gives two beeps. Nothing displays on the monitor (it doesn't leave powersaving mode). It is also very quiet like it is not even trying to work. Did I just destroy my computer? Is there anything I can do?
PS. I did take the asus card back out, so I'm not that lucky
PSS. Got back to being able to boot but now I can't get back into bios to switch from PCI back to original built in card. If I try it just hangs after pressing enter to interupt normal setup
Message Edited by Lazlo420 on 06-27-2009 12:05 PM
Note from Moderator: Gave it a more descriptive subject.
Message Edited by JaneL on 06-28-2009 01:36 PM

I find this thread very interesting. I am assuming this system (3000 j115 A11) is the same as one I mentioned in a post from June 12 (7387A11... Graphics upgradeable?).... and is still hanging out there. Perhaps if Lenovo, or anybody else for that matter, could/would provide SPECIFIC upgrade instructions we could all be enlightened. (In my case I do not own a Lenovo computer but I am hoping to help my sister-in-law with her Lenovo and don't look forward to a major meltdown if the systems are not capable of this, otherwise, simple upgrade.)
Niether of the 2 previous posters mentioned if they upgraded the PS in thier respective systems prior to the graphics card installation (although ala17 "recently" did.). One had issues and the other didn't. If that should be the first step toward the upgrade, it would be helpful to know beforehand.
Thanks and good luck. Post back if you get to the bottom of it.

Problems with conference calls(adding and merging calls) after upgrade to ios 8.1.2 on iphone 5s

I am having weird problem intermittently with adding calls or merging them or swapping them. The issue happens 8 out of 10 times whenever I try to do a conference call. This issue came up after I upgraded to 8,1.2. Never experienced this in 8.1.1 or previous version.
Some of the scenarios that I have experienced is:
1. While on the call, when I try to add a new contact, it just doesn't dial the second number.
2. Sometimes the second number gets dialed, cannot merge the calls.
3. After talking to the second person, cannot go back to the first call.
I am very sure that this is not a carrier issue as it worked flawlessly before upgrade.
Anyone experienced this before? Any suggestions?

Thanks for the above infromation. I did a complete restore of my iphone through iTunes connecting it to my computer via cable. iOS8.1.3 was re-installed. I then added back my settings and data which were backed up prior to restoring the phone. I still have the same issue with conferencing and adding a third caller. When I hit the [+] box, the existing caller is not put on hold. The phone appears to be making a call but it is not dialing to the 3rd party. Shortly thereafter, the Merge icon appears but there is no active call to merge with. I have tried this several times using my wife's iPhone and our home phone to set up a 3-way call. I know it is not working because the 3rd phone (our home phone) does not ring. Is this a hardware problem? My wife's iPhone 6 works with no problem and was purchased the same time I purchased my iPhone 6. Probably time for a visit to the Apple Store unless there is another solution.
iPhone 6; iOS 8.1.3; Carrier: Verizon

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

Does anyone has a problem with the screen of the new ipad? (there's a part of the screen which the color in it is "very" bright) and when I move the aluminium part of the smart cover when it's attached to the ipad the colors change!! Help!!!

I'd take it into my local APple store and have them look at it. There may be something wrong inside your device.

Speaker problem with t420i and adding a new graphics card question

Similar Messages

Maybe you are looking for