Speaker problems in calls since OS 5,01 update

Since updating to IOS 5.01 I have intermittent speaker issues in calls, I can hear the caller, but they cannot hear me. Any suggestions?

I have tried all this and this is definately not a hardware problem as my microphone works for all other applications e.g. Skype. Therefore this must be an IOS 5 software issue affecting telephone microphone function. Any suggestions?

Similar Messages

  • I have started getting spammed on multiple Apple products (iPhone and iPad) with FaceTime calls since the recent IOS update.  Is there any feature or sedtting I can use locally to restrict incoming calls to FaceTime without going to the carrier?

    I have started getting spammed on multiple Apple products (iPhone and iPad) with FaceTime calls since the recent IOS update.  Is there any feature or setting I can use locally to restrict incoming calls to a FaceTime account without going to the carrier?

    After calling AT&T tech support one more time, and explaining to them that the glitch was on their network, they admitted that the problem was at their tower...
    I continued to use the phone on EDGE mode for two more days until the problem was fixed.
    I even got a call back from a tech support guy asking me if my phone was working properly....
    I wish they would have admitted to the problem before I sat at the apple store for 2 hours.

  • No sound in call since 5.0.2 update!

    Sony, I recently updated my Z3C to 5.0.2 and have not been able to make a call since! When I call someone, the phone dials through and connects, the mic is active, and the person at the other end can hear me, but I can't hear anything through my earpiece speaker, regardless of whether it is through the phone (including on speakerphone), headphones or bluetooth in my car. I have used the in built hardware tests and all have come up fine, including the earpiece speaker. A friend of mine has also experienced the same issue since updating his Xperia Z3 (full size) to 5.0.2. Please can you advise on any potential fixes, or when the next update to fix this bug will be... Many Thanks, RichB

    Try clearing the cache and data from Smart connect via Settings then Apps then swipe to All then locate and open said app and tap those mentioned items then reboot and test, if that fails then you may wish to consider a system repair as below
    Performing a system repair using PC Companion will often fix issues - This will factory reset your phone and erase all data so best to backup before you begin
    Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
    Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
    If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP

  • My phone will not make or receive calls since i did the update to 6.0

    help, my phone will not make calls and i can not recieve calls since the updates

    I updated the IOS 6 a month ago and now the issue arises just today. I can make outgoing calls but unable to receive incoming calls and text messages. When someone try to call me it always says no network coverage area, but eventually the signal bar is full. And I realised that when I'm making an outgoing call, and I used another device to call my phone and it able to receive. But when I'm not calling out, the call unable to receive and it says that Out of Network Coverage Area.
    Please help me...

  • How can I fix no sound problem during calls since I have upgraded iphone 4 to ios 7?

    Hi friends
    Since I have upgraded my iphone 4 to ios 7, I am practicing too much problems regarding to sound:
    - playing music has no sound at the same time no sound in during phone calls unless I open the speaker.
    - sometimes sound in music and phone calls comes back for short period and then same problem occuring again.
    I think and I beleave it is software problem and I feel that ios 7 have killed my iphone.
    any one has any idea how to solve the problem or downgrading  back to ios6

    Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

  • Problem getting calls since last software update iphone 4s

    Since latest software update my 4s wont ring unless the phone is unlocked, the missed call showes in notifacations right away, is anyone else having this issue?

    Are you sure that "Do Not Disturb" setting has not been accidentally turned on ?

  • TS2326 I cannot make any calls or receive any calls since my last iOS update. Does anyone know how to fix this problem

    I cannot make any calls or receive calls from my iPhone after my last update. My phone advises callers I am unavailable and when I try to make calls it takes ages whilst it tries to connect then disabled itself and says call failed. Has anybody else had this problem or does anyone know how to fix it?

    Hi Milrclan,
    Thanks for contributing to the Apple Support Communities. 
    If you're not able to send or receive email from the mail accounts on your iPad after updating iOS, start with these troubleshooting tips:
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Best Regards,
    Jeremy 

  • Problem with Siri since OS 8.2 update

    Since update 8.2 I have problems with Siri dictating on the microphone.  I can say a maximum of 5-10 words before it cuts out. Using siri on an older OS version on my iPad I don't have any problems. Can anybody help?

    Hello Brenden
    thank you for your reply. as mentioned it's a problem since the last update and workes on my other Apple devices. I have been using Siri since it first came out.
    Anybody else else have the same problem who found a solution?
    regards
    catherine

  • Problem recording Audio since 10.5.7 update

    Hi,
    I have a MBP Late 2008 and a Mackie Spike XD-2 sound card (used with USB), Garageband 4.1.2 and Logic pro 8.0.2
    However since the update, every time I record audio with the Mackie, all audio guitar and vocals is distorted, crackly and almost electronic sounding.
    I have tried it through Garage band and Logic pro 8.0.2. and both have the same effect.
    I was able to record fine on 10.5.6 and I know that there is nothing wrong with the sound card as it works on another macbook running a lower OS prior to 10.5.7.
    I haven't got time machine running. I do have an external HD for my PC but when I connected it to my mac it said that I would have to re-format it which I am unable to do due to the large amount of windows documents on it.
    I am really unsure whet to do. Can you roll back to 10.5.6 by re-installing it? or if I re-install my original OS and update to 10.5.6 will it remove all of my data and programs.
    Please help, I'l tearing my hair out here and really need to get my recording done.
    Thanks

    Philso69 wrote:
    Ok so we can all look forward to buying new printers when the next update comes out!...
    Of course not, but some old printers and other hardware will eventually not be supported.
    According to Apple, Snow Leopard will only run on Intel machines.
    "Mac computer with an Intel processor - 1GB of memory"
    No jus joking but really they must have some liability for ensuring the compatibility of 3rd party devices that were compatible in previous versions of Mac os x.
    They cannot insure that each and every piece of hardware in the world is supported by every update. It's up to the user to properly vet the updates. The best way is to clone the OS and update the clone and see what works and what does not work.
    I mean mackie doesn't write the software?
    They don't? Somebody does. Maybe that's the problem.
    Message was edited by: nerowolfe

  • Internet problems over Aiport since 10.4.7 update

    Hi,
    since my girlfriend updated her iBook G4 and her iMac G5 to Mac OS X 10.4.7 she encounters always the same problem, when she wakes the iBook oder iMac to use them. The computer connects to the our wirless Belkin router. We can see this, because it gets an IP adress from the router and the Aiport symbol shows full signal in the menubar.
    However, she can't connect to the Internet, Safari says, that there is no connection to the Internet.
    Usually it helps then to switch off/on Airport several times.
    This problem occurs on her iBook and on her iMac as well, since they were updated to 10.4.7.
    Any ideas how we can get this fixed? Thank you!
    Regards, Canubis
    PowerBook G4 15'', iMac G3 333MHz Grape   Mac OS X (10.4.6)   Cinema Display 20", .mac, highlighted keyboard

    Hi and thank you for all the answers!
    Unfortunately nothing of your ideas worked. Additionally I realized that it should really have to do with the Belkin router, rather than with 10.4.7 or the Macs. I assume this, because also my PowerBook G4 with 10.4.6 and her mum's Windows XP running PC encounter the same problems.
    All of this started when Telekom Austria, our Internet provider changed our modem, because the old one had a defect. From the outside it look like beeing the complete same model (but of course it will be some newer revision). But I think that it may not be the modem that causes problems, rather the modem/router combination.
    So, I say thank you to all of you for the many many answers and good ideas. If you have any more ideas, they're very welcome, but as this is not mac-specific anymore, I don't want you to bother with this any longer
    I will contact Belkin support and maybe the internet provider to fix this. If/When fixed, I'll let you know, if others go to encounter same kinda problems.

  • Problems with AirPort since 10.4.11 update

    Since I installed the 10.4.11 update the AirPort started to drop connection every now and then, and I have to enable it again manually.
    Any known solution to this? Any one having the same problem?
    Thanks

    I have the same problem. I have an iBook G4 running OSX10.4.11. It’s about 3.5 years old. Using a LinkMAX HSA300A-2 from Earthlink that is probably 6-7 years old.
    Internet connection (Earthlink ISP via Airport Express) started randomly disconnecting even though the modem was working normally and I had a green light on AE. At first it would hang up for a few minutes, then 5-10+ minutes. Now it just doesn’t connect at all. Restarting modem would give me a connection again. Restarting Airport does not usually give me a connection. The message is that I'm not connected to the internet. At the same time this was going on, I could connect fine with my Windows XP computer via AE – no problems there.
    I gave up on the Airport and plugged Ethernet directly to the computer. That seemed to work, tested it for a couple of days. Then I restarted the Airport (not reset), connection worked for maybe 30 minutes and then stopped again. When I tried to reconnect the Ethernet, I couldn’t get on the internet at all. Had to shut down the computer and restart twice to get a connection. I reset the AE, worked for about 1 hour and then didn’t work anymore. Reset modem and it will be fine for just 10-15 minutes. I now have the computer plugged directly into the modem via Ethernet and internet works okay but I want to use my wireless again!

  • Problems with homesharing since the last 2 updates (4.2 & 4.21)

    I've been having a problem where I'm playing movies or tv shows from my iTunes library through homesharing and my ATV(2) will get "kicked off homesharing". The movie/tv show just stops abruptly and ATV goes back to the main menu and stating that it can not find my iTunes library. This occurs at random times as far as I can tell. I can get it to work again if I turn off, then back on homesharing through iTunes on my Mac. I'm not sure if this is an ATV issue or an iTunes issue (iTunes is ver. 10.2.1). Never had this problem before the updates.

    Thank you for your suggestion.
    I have reinstalled Java 1.5., however I still get a Cannot launch Java application: Uncaught exception in main mehtod: java.lang.NullPointerException.
    I have contacted Encylopaedia Britannica, and they have yet to provide me with a solution.

  • IPad problem with safari since 8.0.2 update

    SInce I installed 8.0.2 update of IOS8 safari doesn.t work. I can't search nor getting an htttp address in the safari web browser. Is somebody had same bug after the same update of his Ipad?
    thanks from Paris

    Have you tried another web browser just to make sure at you can connect to the Internet or can you successfully use other apps like mail, that rely and the Internet? I believe that the Chrome Web Browser is free if you want to try another browser.
    If you can't connect to the Internet at all, did you try rebooting your router? Unplug it f about 30 seconds and then plug it in again.
    DId you try clearing Safari, closing the app and reset the iPad?
    Go to Settings>Safari>Clear History, Cookies and Data.
    In order to close Safari, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the Safari app and then swipe "up" on the app preview thumbnail to close it.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    IF none of that works, you should provide some details because we could back and forth for quite a while just taking shots in the dark

  • Anyone else noticing problems with AppleTV since the OS X update version 10.9.5?

    I installed this update on September 26, 2014 along with Safari version 7.1.  Since then I have trouble downloading content from Netflix and/or get an error saying Apple can't contact the server, and/or poor quality video.  What can I do?

    Hey jenfromearth,
    Thanks for the question. Let’s give the troubleshooting steps in this resource a go, including resetting the SMC:
    Apple Computers: Troubleshooting the slot-loading SuperDrive
    http://support.apple.com/kb/ht2801
    Thanks,
    Matt M.

  • Has anyone else had a problem launching GoToMyPC since Firefox 10.1 update?

    Never had a problem accessing GoToMyPC before Sunday's 10.1 update push. EVER. Now I cannot access it via website or separate downloadable exe. Can't start it from website from IE or Chrome either.
    '''Locking duplicate thread. [https://support.mozilla.org/en-US/questions/918983 Continue here.]'''

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
    If you have tried ALL the troubleshooting steps recommended and you still have the issue, then there's nothing else you can do.  Bring the phone in to Apple for evaluation and probable replacement.

Maybe you are looking for

  • Ipad2 /hotspot problem after software upgrade

    I can connect to my hotspot or at least it is showing that I am connected but can't download email, or access the internet. Anyone else having this problem?

  • Can I download firefox to a disc on another computer and transfer it to my home pc that way?

    I updated firefox to the newest version and it wouldn't work (something about the proxy server) so I stupidly tried to fix it by using the restore program. I then realized that the old firefox was uninstalled when I downloaded the new updated version

  • Ae/Ps .psd workflow

    Hi. I'm somewhat new to Ae and am starting to comp some of my shots for my stop-motion film. A lot of the shots will require set extensions and I was wondering if I could use layers that are .psds and import them in a way that when I update the .psd

  • Spring vs JEE

    Hi, Today when companies have to create a Java development environment, what is the best way to go? Let�s say that a senior team would maintain this environment, and that this environment would spread everywhere in the company for creating every web

  • Windows start bar doesn't display properly when set to auto hide

    As you can see here http://imgur.com/a/JZ3Y9 in the 2nd image the start menu is set to hide but the bad and menu are showing as detached items instead of one complete thing. This causes it not to work properly. If you click start before search box yo