Speaker sound and Picture text

I just got my iphone today and i'm having problems with the speaker volume. I got volume up all the way.... but it sounds so low. And with the pic text why do I have to go online and enter a ID and a password? Is there something I can do? THANK!!!

"Pic text" is called MMS and is not a feature of iphone.
This is one of the most asked and answered questions on this forum. You can do a forum search and find many explanations and opinions.
People can use their phone and MMS to your e-mail address instead of your phone number and you will receive the pic in your e-mail ( no they do not have to have e-mail or internet on their phone). You can save the address that it came from and you can then send an e-mail that they will receive as an MMS on their phone.
You can do a forum search to find out more.

Similar Messages

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the driver?

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the upgrade which is affecting the transfer? Is there a way of resolving this?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

HT1551 sound and picture do not match

Certain movies on Netflix, when played, the sound and picture do not match. It looks like a voice over. You see lips move to the wrong voice.

various. I have some of my dvds that i converted plus numerous others bought off itunes store. the problem seems fairly reccurrrent over all videos?

1.- I´m creating a Muse site which contains videos, photos and sound. All videos, sounds and pictures are located in diferent folders in my PC. Since Muse doesn't organize the project and its files like Dremweaver (all files in a single folder). How can I

1.- I´m creating a Muse site which contains videos, photos and sound. All videos, sounds and pictures are located in diferent folders in my PC. Since Muse doesn't organize the project and its files like Dremweaver (all files in a single folder). How can I manage my site (containing all the media) in order to upload it to a server?
2.- Is there a Adobe Muse community in spanish language?
Thanks for your help
Mauricio444

Kevin is suggesting that you store the projects you create while working through his book in a folder called RoboHelpProjects. It is not where you have to store every project you ever create.That is for the purposes of his book.
RoboHelp initially defaults to My RoboHelp Projects but it's up to you whether you do. Generally on the forums we advise against that as it is part of your profile and can result in excessively long path names in a few cases. Generally where authors create file names that are so long they almost serve as the content.
Projects always have a root folder, call them Project 1 and Project 2 for this purpose. You can have those folders directly off your C drive (or other local partition) or within in a parent folder as above.
Now to what you can and cannot do. You can delete a whole project by selecting Project 1 or Project 2 in Windows Explorer. Obviously if you delete the parent folder you will delete all your projects within.
What you must not do is delete individual files within a project using Windows Explorer, for that you use RoboHelp's Project Manager. The exception is if you go to Tools > Reports there is a report Unused Files. Files listed there will have to be deleted using Windows Explorer for the very good reason they do not appear in Project Manager and, therefore, cannot be deleted that way.
If you think about it, it is similar to Word. There is no option to delete a document there other than using File > Open and right clicking. Not very intuitive.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?

I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?

Also, if you can't get them to work, what is the error message you are getting?
Baron Samedi

Sound and picture did not match?

After recording the presentation it was OK and I could show it. But the fourth time I would show the presentation the sound and animation did not match the pictures? t.i. Keynote did not move to next picture (e.g. I was in picture No. 3 and it shoud move to next picture 4 but it doesn't - and the voice to the next picture No. 4 started continued in picture 3)
Why does this happened? Is Keynote not reliable?

If sound files and images are placed on the slide and timed using Inspector > Builds they will maintain the timing.
I have suggested to do that instead of using the recording feature built in to Keynote which has proven to be unreliable with large numbers of slides and longer voice overs.
Switching to using builds will eliminate these errors.

I am having trouble keeping the quality of my video when exporting to my external drive. I change the kind to "original" but when I view the video from the external drive once exported, the sound and picture are distorted.

I am having trouble keeping the quality of my video when exporting to my external hard drive. I have tried to export from iphoto with changing kind to "original" but when I open the video from the external drive the quality is effected. I have also tried copying the video to my desktop and then dragging and dropping onto the drive...same problem. Any suggestions? I would like to save everything to my external drive so that I can delete all of iphoto library and then reimport to correct a few things.

The file sizes are identical. In the finder I did a search for all .mov files. Then when they came up, I went through them and named each one so that they would be easier to find. I am a new mac user and am used to windows. I realized later that I should not have done this....with a mac files should be named within iphoto app...not finder....When I went to open the videos in iphoto, it wouldn't allow me. I had to go into finder, copy to desktop and reimport into iphoto. Then the videos worked again. However, I had the problem with the poor video quality when copied to external drive before that. Actually the first problem I had was when I copied to ext drive...videos were copying as an image...so I learned that you have to change "kind" to original before exporting....then that problem was solved...now they are videos, not images but not of a great quality. Skips, sound and images are not in sync...etc...

Text sound and no text

Since I got the 2.1 upgrade, I keep getting the text message noise and no text message. I am getting most text messages, but where are the other ones going, and why aren't they showing up!?

You are probably getting the new repeat alert:
http://www.apple.com/iphone/softwareupdate/
"Repeat alert up to two additional times for incoming text messages"

How do u send or foward muti media messages with sound and pictures

How do you send or forward a multi media message with both sound and pictures

GarageBand does not have a "Normalize" feature (that's what you're friends are talking about).
iTunes has "Sound Check" which performs that function, however I've never used it and have always been under the impression that it just affected playback within iTunes. Perhaps this is not the case, you'd have to experiment to see if it affected the audio transfered to CD.
Many Audio Editors have a Normalize function, so you might take a look at one of them:
http://www.thehangtime.com/gb/gbfaq2.html#audioeditors

When opening the project at a new computer, the sound and picture doesn´t match

We are editing a documentary and when we open the project at a new computer the sound and clip doesn't match. We have noticed that the problem is that if we have a clip named 0001 on one SD card, it takes the sound from another SD card where the clip also is named 0001. Since we are working with a lot of material and this has happened on almost every one of them, its a huge problem, since we got no time to reimport and redo every clip. Thankful for your help.

Try batch renaming some of the files.

N79 Sound and Picture Quality should be improved l...

I just recently replaced my N82 to a new N79 because I really love the design and features.
One thing I noticed in the MUSIC PLAYER using the same modified equalizer in N82 is that the sound is too bad and horrible. Please do the same programing in N82 V.30 Music Player sound. We'll be expecting that on the new firmware.
Even the picture quality of N79 is not good. Do something about it because I don't want to be frustrated.
Thank you,
RJ
NOKIA N900
PUT AN EQUALIZER IN N900

I agree that the bass is deep compared to the previous Nseries but I noticed that it balances the output of the sound when it reaches the highest peak. Tendency is to lower or balance the sound. I can't bear this. Compared to the my previous N82 music player, the sound is excellent Both bass and treble are clearly defined.
Try to adjust the 53Hz to the highest point which gives the bass sound, you'll notice the automatic adjusting of sound which is to me, very annoying.
Cheers!
25-Nov-2008 10:23 PM
korngear wrote:
Honestly speaking, the sound quality of N79 is vastly improved over the previous models of Nseries like N82, N95, N95 8GB etc. Of course personal opinions about SQ is different but the improvement on SQ of N79/N85 is obvious and significant, and the N96 is now the best of em and a worthy replacement of N91/8GB.
The bass is deep and rich in N79, N85, and N96 considereing all other S60 devices, I tweaked the 8 band equalizer in my N79 to my own preset, the volume is louder, and treble is much clearer.
Message Edited by korngear on 25-Nov-2008 08:24 PM
NOKIA N900
PUT AN EQUALIZER IN N900

HD DVR QIP 7216-1, sound and picture issues.

Just got fios yesterday, and i am very pleased with picture quality. although right from start, i had issues. First off, I run the HDMI cable right into my receiver Onkyo TX-SR606 and then from there into my TV. Well, i saw a green screen. No big deal, just ran the HDMI straight into the tv, but it kinda defeats the purpose of having a pretty good receiver. Second issue, and its very very annoying, there is a slight pop or crack in the sound, only coming out of the front speakers. its very very low, but i can hear it, its not the speakers, because when i play ps3 or dvd no pop or crack. and you really hear when a commercial changes. i have an optical cable running from box to receiver. Any help to these issues would be appreciated.

not true. I also have an Onkyo 606 with a 7216, and I also get the same green screen after 20 secs, the problem
is with the 7216 HDMI comms and Verizon need to fix it.
The 606 is one of the biggest selling reveivers out there, and the fact that Verizons 7216 is incompatible is ridiculous.
Cheers!
Arthur

Loss of sound and picture sticking

i have been having a problem with the sound on my samsung tv for the past three months. customer ser vice is of no help...when i can get somebody that actually speaks and understands english, they just tell me to unplug things....wait ten seconds....send refresh signals....and nothing! I pay$175.00 a month for the xfinity bundle..and to be honest, i am not satisified with the service i have received. thinking of dish. they keep sending me offers in the mail...but i have been with comcast for soooo long, i really dont want to have to start all over again with another company and another installation...ugh!! help me please!!!!!

schaferggg wrote:
i have been having a problem with the sound on my samsung tv for the past three months. customer ser vice is of no help...when i can get somebody that actually speaks and understands english, they just tell me to unplug things....wait ten seconds....send refresh signals....and nothing! I pay$175.00 a month for the xfinity bundle..and to be honest, i am not satisified with the service i have received. thinking of dish. they keep sending me offers in the mail...but i have been with comcast for soooo long, i really dont want to have to start all over again with another company and another installation...ugh!! help me please!!!!!
Apologies for the issue and the experience that you described above. I have asked a colleague to review your account and reach out to you so that we can get any underlying issues identified and resolved.
Can you describe the audio issue that you are having? Is this happening on the DTA (smaller cable box) or the Scientific Atlanta 2200 cable box or the Cisco RNG 150 cable box? Thanks for any additional details that you are able to provide.
Thanks for your patience.

Loss of Sound and Picture Stutter

I am now getting fed up with the sound regularly dropping out and the picture stuttering. I cannot manage 5 minutes of viewing without this happening. I think the stuttering picture is down to buffering but not sure as I thought this was signified by a circle spinning around. If I had known the service was this poor I would not have signed up for it. Waste of money!!!

I take it you are referring to the live extra channels, rather than on demand content? How is your box connected to the hub, powerline adaptors or ethernet cable?

Synchronization poblem sound and picture -

I've got a problem with videos (wmv), which I want to put on my Zen-player.Every video I transfer to the player (wmv-format) and is converted by the creative media tool shows a delay?between the shown picture?and the sound. This delay doesn't occur in the "original" wmv file when shown on my computer. Does anyonw know what to do??Thanks a lot!

I believe you are using the old creative software bundle, which is causing the issue. I would recommend, if you are using the old software bundle, to update your existing software bundle from the creative website. http://sg.creative.com/support/downloads/?The bundle software can be found here... Moreover, if your firmware a older firmware, you would wish to update it too... Side Note: If you would wish to convert your videos without using the creative software bundle, I would recommend you to set the Frame speed/rate at 25 frames/sec at the maximum... Do not set above this. If frame rate set above this, the pictures and sound may go out of sync.Message Edited by tormont on 0-0-200705:52 AM

Speaker sound and Picture text

Similar Messages

Maybe you are looking for