Speaker - Sound Problem

Hi All ,
I have a problem with my new iPhone 4s 64gb ( i bought 1 day ago ).When im playing video,music or any sounds ( inbound calling,alarm,siri,keyboard click, ... ) not any sound in my speakers.Works only when im put headset,watch video,listen a music with sound !
Have 2 Questions ,
1 - Hardware Problem?
2 - Software,firmware Problem ?
P.S : Sound Switch ON
Thanks for helping
Time Cost Money

Did you also try to do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)?
Well, if you did and the problem is not solved then since it's new, bring it back to the Apple Store and have them look at it. Maybe you do have a hardware problem.

Similar Messages

Speaker sound problems. New 4gen, Ipod Touch

I just bought my 4th gen Apple Ipod touch brand new. Everything was working fine for about 2 weeks and then I started noticing that the external speaker sound would suddenly mute itself and then sometimes it would work again.
I've already tried shutting off, restoring and updating my ipod touch. It seems that the earbuds would always work whenever i plug them into the headjack, but when i unplug there would be no sound.
I've checked my volume, and even the volume for the ipod's ringer and alerts.
What can I do?
My speaker is bi-polar!!
Now I feel foolish for upgrading to the 4th since my 2nd generation has never failed me from the day I bought it.
I bought my ipod touch brand new from AMAZON, and I mean from Amazon not a third-party seller.
Thanks for the feedback.

Contact Apple...sounds like a warranty issue.

Loud speaker sound problem

loud speaker sound is not clear... specially when playing in full volume it gets distorted

Try settings-apps-all-sound enhancements,force stop and clear data.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Speaker sound problems

I have ipod, I have ipod touch 4th generation and when i plug in to a stereo speaker, the sound only come out from my ipod and not the speaker. However, when i plug in my nano, it does work.
So is there any issue with the setting of my ipod touch?

Does the iPod fully seat in the adopter?
Does the car system manufacturer say it will work with your model iPod and its iOS?
Some uses have reported that an iOS update broke compatibility with their car system.
Sometimes this works:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Onboard sound 6 speaker sound problem

I have a set of Sound Blaster 5.1 surround speakers, I have tried every configuration I can think of, but I can't get sound more than 3 speakers at any one time. Have I missed a jumper or something else?
Almost forgot, I have a KT4 Ultra.
If you need more info let me know.
Thanks for your help,
Al

I mentioned something about that here. But my concern was that it also turns off the Line-In jack, which does no good if you are trying to record something. Anyone got a clue on this? Any good sound cards tested with the motherboard? Comments?

Desk cradle problems and speaker (sound) problems

I have a droid charge and sometimes when I am using my phone it goes to the desk cradle by itself also within the past 2 days my phone won't make any sound unless I have my headphones in

Hi jaw143mpj,
We definitely want to make sure your phone works the right way for you. In regards to the audio trouble, it sounds like there may be debris in the headset jack causing the audio to work without the headset. I encourage you to test any sound or music with the headset on and while the music is playing remove the headset and verify if any audio is present. I recommend if no sound is heard to check the headset jack and verify it appears in good condition and no debris is present.
Have you found that the cradle mode is activated when using a specific app or a specific service on the device? I recommend running the device in safe mode http://bit.ly/n2EIBZ for 24 hours and verify if it doesn't occur. Please keep us posted.
Thank you,
MariaC_VZW
Please follow us on Twitter @VZWSupport

I have sound problem in My Cq40-144TU Laptop

Hi,
I have Cq40-144tu laptop. i am't hearing sound from internal speaker but sound is hearing from headphone. I have configured my system many time. Last got to shop and they also format it and reconfigured but still this problem is showing.
But I was hearing sound from speaker when i chat in gtalk and then i heared sound from window media player and other application also for 5 to 10 second only. every time some text is recieved i hear sound for 5 to 10 second.
please tell me what is problem in My Laptop. i have window 7 ultimate operating system.
Please help me sir

What sound problem - no sound on anything, no sound on some apps ?
Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
And for future info typing in all capitals is considered to be SHOUTING

HT4623 My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine

My iPad 3 has lost the speaker sound after updating to iOS 6.1, headphones are working fine. Please help me out, done all the troubleshooting like restarting, side switcing, cleeaning the headphone jack etc.,

Hi I also have this problem. Sound was only working on the headphones and also on the volume slider in the settings app. Everywhere else I get no sound and no volume slider. Now the headphones don't work either.
(I'm using an ipad 2 iOS 6.1.2)
And NO it's not muted. I've reset all settings and restarted the iPad. Been searching forums for a couple days. Some say its a dirty docking port problem, others suggest a Skype or other app update that could be the problem.
No volume control icon appears when I press the volume control buttons. Only says sound effects, if it says anything at all. Most often there is NO volume icon. YouTube, video, music, and other game apps, no sound.

Please help iPhone 5 sound problems

iPhone 5 sound problem: my iPhone 5 noise is only coming out thru the ear speaker and will not come out of any of the other speakers on my phone i say again it will ONLY come out my ear speaker it does it in games and in videos in music in everything! Ive reset the phone and went thru all the settings and everything to try to fix with no luck at all please help me!

fdisk formated and reinstaled windows 3 times. fresh install each time i installed a sound card. so I dont think lingering drivers is the problem which also means dx9 has been installed fresh each time.also I have been dealing with this for nearly a month and I am at a loss.

Sound Problems on iPad: how to fix, easy [video]

Hi dear iPad user,
Most people will, eventually, have sound problems: the cause can be complex as a 'miss-behaved' app that messes the sound engine or as simple as the iPad being forgotten on Mute/Volume Down.
I used to help family and friends to fix their iPads' sound problems by sending them 'text' instruction steps... lots of times they ended up calling me on the phone...
So I made a video (short: 1m40s):
https://www.youtube.com/watch?v=FjBP-Ncj_fE
It shows:
how to unmute the sound (even if the side-switch locks the rotation of the screen)
how to put volume up
how to close all the apps (in the case there is an App messing with the sound system)
how to reboot the iPad (ultimatelly fixes hard cases of messed sound system)
What it won't fix: if you have a hardware problem...
If you do all the steps and you get NO SOUND AT ALL, please, try also checking if you car listen sounds using a HEADPHONE (you know are working conditions). If you can listen to sounds in the headphone but no sound at all in the iPad's built in speaker, well, there might be a hardware problem and you should look for help on an Apple Retail Store or other official technical support available at your location.
Hope this helps!
Everson.

UPDATE: fixing iPad Sound after iOS 7
http://youtu.be/SDf1LDcE95Q
(1min 36sec)
It covers the basics:
checking side-switch / mute / "Control Center"
volume all up
...and also the worst cases:
closing all apps (for rare cases when a single app might render the sound system instable)
rebooting the iPad
So, don't get desparete: try the things in the video.
There are people who reported having forgotten an audio-bluetooth connection activated with a turned-off sound-system or speakers... or forgot Air-Play turned on... so be sure you disengage bluetooth and/or airplay.
On the 'hardware side', dirty dock connector (30 pin) can make the iPad 'think' it is connected to external audio - if so, cleaning it with a dry toothbrush can fix. Also, moisture in the headphones connector can make the iPad switch to 'headphones' even without headphones connected, making it silent: check if you can hear things with headphones plugged in - if so, try gently inserting and removing headphones a few times and check if you get sound back to iPad's speakers alone.
Good luck to everybody! Audio problems are quite common - fontunately they are easy to fix.

Pismo Sound Problems after Sleep in Tiger

Hi all. New to the forums and returning to Macs after years of cursing Bill Gates. Picked up a Powerbook Pismo from a friend and have been having some fun with it, but I have one problem I can't solve. I replaced the hard drive (saved the old one) and installed Tiger and 1GB of memory on the machine. All seemed well until I noticed that the sound would not work sometimes after sleeping. The sound will usually return with a reboot, but sometimes I'll have to actually turn the machine off, and clear the PRAM to get the sound to come back. Sometimes, the volume and screen controls will both not work at all (pop up doesn't even appear when the keys are pressed), sometimes it's just that the sound doesn't work, but everything looks right on the screen. I've also had the sound and screen buttons not work only to have pop ups suddenly appear and the adjustments happen several minutes after I pressed the keys. So far I've tried:
Clearing the PRAM
Checked the Pram Battery (ok)
Reinstalled Tiger (Still loses sound)
Downgraded to 10.3 (problem persists, and seems worse)
In system information on Tiger it says "there was an error when retrieving that information" when you click on the sound hardware.
The machine is a 500mhz Pismo with a 48gig drive and 1 gig of Memory (133mhz, would that cause this sort of problem?)
I have not tried going back to OS9 to see if the disappearing sound resolves as I don't currently have an OS9 disk.
This sure seems like a software problem, but I'm starting to wonder. I really like this machine and want to get it to work! Help!

Maxstang, welcome to Apple Discussions.
Did you repair permissions after you installed Tiger? Have you updated Tiger to 10.4.11?
Here's the Sound troubleshooting info in the Pismo Service Manual.
No sound from speaker(s)
1. Verify mute mode is not enabled (F6 on the keyboard).
2. Check the volume setting in the Sound control panel.
3. Verify no external speakers or headphones are plugged in.
4. Reset PRAM.
5. Make sure speaker cable is plugged into sound card.
6. Replace sound card.
7. Replace speakers (part of the top case).
8. Replace I/O logic board
Startup sound is heard, then no sound from speaker(s)
1. Remove sound preferences from System Folder, reset PRAM,
then restart.
2. Perform clean installation of system software.
Had the Pismo previously had OS X installed. There's a firmware update (Boot ROM version 4.1.8) that should be installed prior to installing OS X. However, when I got my Pismo with Tiger installed, the firmware was not updated (have since updated). However, I don't think this could be the cause of your problem, since I had no sound problems when the update was not installed.
The PC133 RAM (which runs at 100MHz) should not be the problem. I have PC133 RAM in my Pismo.
Since you replaced the HD, could you have disturbed the connection to the Sound Card. The Sound Card is located to the upper-right of the HD. Here's a helpful laptop site.
Fix It Guides for Mac Laptops & Mini
http://www.ifixit.com/Guide/
The guides can be viewed on-line or you can download a PDF file.
 Cheers, Tom
(='.'=)
(")_(")

Sound Problem Plus Memory Problem

I've also posted this same issue at the EVGA website with no help what so ever yet. Also if it's ok I'm having the above mentioned memory problem that it probable not related but if anyone does have good input I would love to hear. Hope this doesn't break any rules, didn't see anything in the listed rules thread. So here it goes.
Ok I'm having a few minor but very perplexing and annoying problems. I have recently built a new rig to include the following.
Windows 7 64 bit Home Edition
EVGA P55 FTW Intel P55 Socket LGA56
Intel Core i5-750 2.66Ghz 8M LGA56 CPU
Corsair Dominator 4GB DDR3 PC2800 (2 x 2 GB sticks)
Ultra LSP750 750w Power Supply
Seagate TB Serial ATA HD 7200/32MB
Cooler Master HAF 932 Full Tower Black Case
Galaxy GeForce GTS 250 52MB PCIe x2 (SLI Setup)
BFG - NVIDIA GeForce 9800 GT GB GDDR3 PCI Express Graphics Card (Physx Setup)
PROBLEM ONE:
This one I had a lot less that I was able to actually try because it just confused the crap out of me. So I started by going to test my sound. I'm running an optical cable from the on board sound port to back of my sony surround sound system. I get sound from my left and right channel but nothing from the center, rears or sub. So figure no biggie just need to change the configuration from 2 speaker stereo to 5. surround sound. Guess what... the option isn't there? WTF? A sound card with an optical port with no 5. support? So went online found the drivers for the sound on the mother board and tried reinstalling thinking maybe somthing was wrong with the drivers on the CD. Well it still didn't work. So I figured what ever, I got an external sound card that I know works with Windows 7 since it was on other desktop and hooked it up. Its a Creative - Sound Blaster X-Fi Surround 5. External USB Sound Card. Well it installs fine and I go to test it. Yep you guessed it! Still only sound from the left channel and the right channel with no option for surround sound. So I was able to find updated drivers for that and ran em. Well now I have an option for Surround sound with side speakers only no rear. Oh but it doesn't really matter because the left and right channel are still the only ones able to produce sound. And yes the speakers work I turned on my X-Box 360 hooked up to the same speakers and LCD tv and played COD4 with full sound working fine. So something else has to be happening I just have no idea.
PROBLEM TWO:
The second problem was with the memory. Everything booted fine but it initial only detected 2 GB. By the way I had them installed in slots and 3. So I shut down and popped em out checked the copper connectors everything looked fine and reseated the chi
ps.
This time during the boot up I checked the BIOS. It saw all 4 GBs of memory. Continued into Windows. Windows now saw all 4 but only .99 GB was available. Now the only other time I've seen anything like this was with on board video sharing the memory, and even then it wasn't half of the systems total memory. I then tried shutting down and putting the chips in 2 and 4 just see what would happen. Well I got an EA post error on the LED, couldn't even boot. So I figured o'well power down completely and tried to run the memory in 2 and 3 to run it out of dual channel. I was able to boot but still had the same issue. .99 GB available and still saw all 4. At this point it was just getting silly so I figured ok I'll download the new BIOS with my laptop, burned it to a CD. Booted the desktop and ran the BIOS flash. Update seemed work fine, honestly the BIOS didn't look much different and I didn't take note of the previous version before I did it so I can only assume it worked. However it did not fix my problem. So I'm still stuck at windows seeing 4 GB of memory with only .99 available.
Anyway... I'll keep trying to get this working and hunting around online, but I'm really hoping you all have some ideas. I'll be trying to call EVGA today for some help too and possibly Corsair. Thanks in advance for the help!

Hello,
cannot help with the sound problem.
For memory, I've got almost the same thing but with 4 sticks of 2gb and only 2 detected on an ASUS P7P55D deluxe.
Bios was my issue but I needed to do this (but with pairs of sticks instead of sticks) after the bios update to finally get my 8gb under windows:
Make a clear cmos. Then boot the computer with only one stick of ram in the port .
If everything is fine, turn off and add the other port of the same color for dual channel.
If it does not boot with the 2 sticks in the port of the good color, try to switch ports again. Maybe one stick is dead?

Inspire 5.1 P5800 Sound problem...

Hello Everyone
I have a Sound problem with my 5.1 speaker system. When I turn it on,(playing music or not)I hear a terrible loud/high background noise, like a constant interferance. It's a very unpleasant sound. The noise come from all satelites speaker(Speacially the center speaker.)
I'm sure that all conections is ok.
Please help me to solve this problem.
PD.: If it's help I have a Compaq Presario SR602LS Desktop PC.

1 Identify which component causes it; plug headphones to your computer to see if that has noise, try all three connections. Then, connect all speaker inputs to a different source, like a mp3-player.
2 If both are noise-free, it has to be some kind of interference. The cables to the satellites are coaxial so they are not likely to be the cause, but the 3,5mm jacks to the sub might be. To find out if they are, try moving your sub around your room to see if the noise changes (both decrease or increase).
3 If the problem cannot be traced to either or 2, it might be a groundloop: that the signal fed from, for instance, your computer, to the ground connection of your electricity-plug is picked up by your speaker set. To check this, try connecting your set to a different electrical group or at least a different plug.
In case 1: if it's the pc, try grounding it if it's not already. If it's the speakerset it will not be so easy to solve.
In case 2: see if you can connect the sub to your pc using coaxial wires (or perhaps even optical, I am not familiar with the set), you might need some 3,5mm-to-RCA-plugs for that, or if you can somehow shield the inputcables by wrapping it in aluminum-foil or anything.

Since I have updated to 10.7.4 my Bose Sounlink Bluetooth speaker sound very low

Since I have updated to 10.7.4 my Bose Sounlink Bluetooth speakes sounds very low.. OK with iPhone and iPad

This happened to me exactly! What I did was I went into Audio MIDI and clicked on Bose Soundlink tab. You'll see 3 bars; master, 1 & 2. Max out all the bars and that should fix the problem. Hope that works for you.

Re: IDT High Definition Audio CODEC (NO SOUND PROBLEM) Options

I have been trying for 3 days to fix this issue & I even had Bicrosft tech support on line remote PC acces take control of my PC, and still can't get the sound to work!
Does any one know how to fix this issue? DEFINITIVELY?
IDT High Definition Audio CODEC (NO SOUND PROBLEM)
‎03-20-2013 05:24 AM
My PC info is:
Manufacture: Hewlett-Packard
Model: HP EliteBook 8460p
Rating: 5.3 Windows Experience Index
Processor: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz 2.50GHz
Installed memory (RAM): 4.00 GB (2.98 GB usable)
System type: 64-bit Operating System
Pen and Touch: No Pen or Touch Input is available for this Display
Windows 7 Professional
Product ID: 00371-OEM-8992671-00008
Problem: I was watching a movie a night before, and I muted and forgot to turn off my laptop, today I found out the sound did not work, so I tried restarting and still no hope, i tried disabling and enabling the IDT High Definition Audio CODEC and still no hope, windows says that this device is working properly, but oviously its not I really need help, I dont know anything advanced about technology yet, so im helpless.
T
Re: IDT High Definition Audio CODEC (NO SOUND PROBLEM)
‎03-20-2013 05:28 AM
I also tried leaving the Laptop to cooldown for about 3 hours and still no sound.
DavidPK
Re: IDT High Definition Audio CODEC (NO SOUND PROBLEM)
s
‎03-20-2013 05:40 AM
Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
ftp://ftp.hp.com/pub/softpaq/sp59001-59500/sp59291.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow thisand then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Start the notebook and let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K

Hello DesertWildcat,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having and issue with your HP EliteBook 8460p's audio not working. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Speaker - Sound Problem

Similar Messages

Maybe you are looking for